Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, October 28 at 2:00 PM ET

Register Free →

This Government Contract opportunity from Department Of Defense was posted on July 30, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Quality Assurance and First Article Testing (FAT) Support

Closed
Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 541320
New
SLED
27013-4201, Paulding County Comprehensive Plan Five-Year Update
Solicitation # 27013-4201
Paulding County Government is soliciting proposals under RFP No. 27013-4201 for a qualified consultant to prepare the 2027 Five-Year Update to the County's Comprehensive Plan, specifically covering unincorporated Paulding County. The scope of work includes assessing existing plans, updating community goals, needs, and opportunities, and revising broadband, transportation, and policy maps. The consultant will also develop three to four special-area studies, the 2027–2032 Community Work Program, and a potential Capital Improvement Element. Key deliverables include printed and electronic reports, supporting graphics, and original GIS shapefiles, all of which must adhere to the Georgia Department of Community Affairs’ Local Planning Requirements, Chapter 110-12-1. The project is scheduled to initiate in January 2027, with final plan adoption in September 2027 to meet the October 31, 2027, state deadline. Proposals must be submitted electronically via the Bonfire portal by 10:00 a.m. ET on November 20, 2026, and must remain valid for at least 90 days. Award selection is based on best value, with scoring weighted across price (30 points), project understanding and methodology (25 points), consultant qualifications (20 points), experience (20 points), and proposed schedule (5 points), with an additional 20 points available through optional presentations. Successful offerors must provide required insurance certificates and a Contractor Affidavit per O.C.G.A. § 13-10-91(b)(1).
Paulding County Government

POSTED

5 days ago

DEADLINE

in 23 days
NAICS: 541320
New
SLED
Parks and Recreation Master Plan and Recreation Impact Fee Methodology
Solicitation # 26-22
Walton County is soliciting proposals from qualified consultants to develop a comprehensive Parks and Recreation Master Plan and a corresponding Recreation Impact Fee methodology. The Master Plan will establish a twenty-year framework for the acquisition, development, and management of parks, trails, and open spaces across four planning areas: North, North Central, South Central, and South. Key deliverables include a SWOT analysis of the current system, short- and long-range management plans, a 20-year optimization plan with financial forecasts, and an evaluation of staffing needs. The Recreation Impact Fee methodology must be delivered as a separately identifiable work product and will include a statutory legal analysis and a fee structure based on the needs identified in the Master Plan. The anticipated contract term is twelve to eighteen months. Proposers must demonstrate significant experience, having completed at least three comparable master planning engagements for local governments within the last seven years, and must possess specialized expertise in impact fee methodology. Proposals are evaluated based on Qualifications and Relevant Experience (35 points), Project Team and Key Personnel (25 points), and Technical Approach and Work Plan (40 points). Fee proposals are not submitted with the initial response; instead, the County will negotiate the scope and fee with the highest-ranked proposer. Submissions are due by November 3, 2026, and must adhere to a specific five-tab format with a 40-page limit for primary sections.
Adminstration

POSTED

5 days ago

DEADLINE

in 6 days
NAICS: 541320
New
SLED
RFP Shelburne Road Center Plan
Solicitation # 77246
The Chittenden County Regional Planning Commission, in partnership with the City of South Burlington, is soliciting proposals for the development of a community vision and center plan for the Shelburne Road Center and Neighborhood. The project aims to transform the corridor, specifically around Fayette Road and Hannaford Drive, into a vibrant mixed-use center featuring a connected street network, multimodal transportation, and the accommodation of 1,200 to 1,500 new housing units. Key deliverables include an implementation-focused Center Plan with an Official Map and Capital Improvement Program recommendations, traffic microsimulation analysis, and a conceptual plan with high-quality visualizations. The total budget for the project is 200,000 dollars, split across two fiscal years, with work beginning in late 2026 and concluding by winter 2028. Proposals are due by November 20, 2026, and must consist of separate technical and cost volumes. The award will be based on a competitive scoring process where the technical proposal is weighted on project understanding and methodology (60 points), firm experience and staff qualifications (30 points), and reference information (10 points). While cost is considered, it is not the deciding factor. Selected consultants must be licensed to do business in the State of Vermont and comply with 2 CFR 200 and Title VI of the Civil Rights Act of 1964, as the project utilizes funding from the Federal Highway Administration and/or Federal Transit Administration. The project timeline includes key milestones such as a draft conceptual plan by June 30, 2027, and a final plan for adoption by February 1, 2028.
Department of Economic Development

POSTED

5 days ago

DEADLINE

in 23 days
NAICS: 541320
New
SLED
For The Provision of Professional Services - Municipal Planner of Economic Development For The Zoning Board Of Adjustment and Planning Board - 2027
Solicitation # 2026-RFQ-004
The Borough of Bergenfield is soliciting Qualification Statements under solicitation 2026-RFQ-004 for professional services as the Municipal Planner of Economic Development for the Zoning Board of Adjustment and Planning Board. The objective is to identify a qualified firm, individual, or organization capable of providing high-quality and cost-effective services. The anticipated contract award date is January 1, 2027. Interested parties must submit their responses electronically via the designated procurement portal by December 4, 2026, at 10:00 am. Submissions must include a narrative statement of the respondent's understanding of the Borough's goals, a cost proposal detailing hourly rates, and the professional history of all personnel assigned to the project. Applicants are required to provide a separate qualification statement for each board they wish to serve. Mandatory documentation includes a State of New Jersey Business Registration Certificate, a Certificate of Employee Information Report, proof of professional liability insurance, and various compliance disclosures regarding political contributions, non-collusion, and prohibited investment activities in Iran, Russia, and Belarus. All required forms must be uploaded as a single PDF document. The Borough will evaluate submissions based on the most advantageous overall proposal, considering all relevant professional and administrative factors.
Administration

POSTED

5 days ago

DEADLINE

in about 1 month
NAICS: 541320
New
International
Green Links Study, New Forest National Park
Solicitation # NFNPA - 0080
The New Forest National Park Authority is soliciting a consultant for the Green Links Study, a four-part project aimed at improving connectivity between landscapes and habitats. The study focuses on connecting land outside the New Forest National Park boundary to land within, as well as addressing fragmentation caused by major road arteries, specifically targeting the north, west, and southern boundaries and corridors such as the A31. The project budget is between 80,000 and 100,000 GBP, with a requirement for proven added value at the higher end of this range. The estimated period of performance is from December 1, 2026, to March 31, 2027, with a final sign-off deadline of March 19, 2027. Key deliverables include an inception meeting, two all-day site visits with the Landscape Officer, a mid-term review, a draft review, and a final sign-off meeting. The contract will be awarded based on the most economically advantageous tender, with a weighting of 70 percent for quality and 30 percent for price. Bidders must meet a minimum quality threshold of 6 points to be considered. Required qualifications include experience in landscape-sensitive projects within Protected Landscapes and an understanding of the various governing bodies in the New Forest region. The selected provider must maintain specific insurance minimums, including 1 million GBP for Public and Employers Liability and 250,000 GBP for Professional Indemnity. Submissions are due by November 16, 2026, at 12:00 pm via email or the In-Tend online portal, and must include a fully completed Assessment Document.
New Forest National Park Authority

POSTED

6 days ago

DEADLINE

in 19 days
NAICS: 541320
New
SLED
Design & Feasibility Study – Youth Activity Park
Solicitation # 2026-0008
The City of Havre de Grace is soliciting proposals under solicitation number 2026-0008 for a Design and Feasibility Study to develop a public use Youth Activity Park on city-owned property, specifically evaluating the STAR Centre lot and other potential alternate sites. The project aims to create innovative outdoor engagement opportunities for pre-teens and teenagers in alignment with the City’s Comprehensive Plan and Sustainable Communities of Maryland Plan. Key deliverables include a site analysis, community engagement through at least one in-person session and a public survey, conceptual and final design plans, and detailed cost estimates for both construction and annual maintenance. All designs must adhere to ADA compliance and modern safety standards. Proposals are due electronically via the HdG Beacon Bid platform by December 1, 2026, at 3pm. Submissions must include a cover letter, cost proposal, business license, evidence of a Professional Civil Engineer license on staff, and a statement of qualifications and experience including three similar projects from the last five years. The selected contractor must provide comprehensive insurance coverage, including General Liability, Workers Compensation, and Professional Liability, with minimum limits of 1,000,000 dollars for most categories. The project is expected to be completed within 90 to 120 days of the Notice to Proceed, with monthly invoicing and payments typically issued within 30 days of acceptable completion of work. The City reserves the right to terminate the contract without penalty if funds are not appropriated.
City of Havre de Grace

POSTED

6 days ago

DEADLINE

in about 1 month
NAICS: 541320
New
SLED
Comprehensive Master Plan of Recreation & Parks Services in Bulloch County
Solicitation # FY27-RMP-27REC01
The Bulloch County Board of Commissioners is seeking qualified consultants to develop a Comprehensive Master Plan of Recreation and Parks Services for the unincorporated areas of Bulloch County. This long-range strategic guide, covering a 10 to 20 year horizon, aims to assess current park assets, staffing, and operations while identifying future needs based on population growth and community trends. The selected consultant will be responsible for community engagement through surveys and public meetings, as well as providing recommendations for capital improvements, maintenance strategies, and funding options. The project must be completed within 10 months from the notice to proceed. Proposals must be submitted by November 19, 2026, at 3:00 P.M., and must consist of two separate volumes: a technical proposal with a maximum 15-page abstract and a price proposal submitted in a sealed envelope. Evaluation is based on a two-step process where technical proposals are scored first on capability, project approach, community engagement expertise, and schedule, with the highest-scoring firm then entering price negotiations. Required documentation includes a fee schedule, non-collusion affidavit, bidder declaration, and E-Verify affidavits. The successful firm must maintain comprehensive insurance coverage, including 1 million dollars in general liability and professional malpractice insurance. All project deliverables will remain the property of the County. Payment is structured via monthly vouchers for work completed, up to 95 percent of the contract price, with final payment issued upon County verification and acceptance. The contract may be terminated by either party with 30 days written notice.
Bulloch County Board of Commissioners

POSTED

6 days ago

DEADLINE

in 22 days

AI Contract Overview

Show more

The contract seeks qualified entities to provide quality assurance and First Article Testing support for production validation activities, with an emphasis on establishing readiness for potential future FAT requirements even though FAT is not currently mandated. This subcontract, classified under NAICS code 541320, is being solicited by the Department of Defense through the W6QK Acc-Dta office and is open to responses until August 14, 2026. While no set-aside designation or specific performance location has been specified, respondents must demonstrate proven experience in quality assurance processes and the ability to execute FAT protocols to ensure compliance and reliability in production validation. The opportunity is designed to build a pool of capable contractors who can be rapidly engaged should future production programs necessitate formal first article testing and related quality oversight.

General Info

Qualified entities sought for QA and FAT support to ensure production readiness, with responses due August 14, 2026.

NAICS

541320 - Landscape Architectural Services

Place of Performance

MI

Set-Aside

NONE

Documents

This scope was carved out of 6640-01-539-8269.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

W912CH-26-R-0089 For Dry Collection Filter Adapter; NSN: 6640-01-539-8269

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PhaseClosed
Posted

subcontract

Response Deadline

Deadline has passed

Submission Closed

Find active opportunities like this

Get full access to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → W6QK Acc- Dta
ContactsNo contacts available
OfficeN/A
Office AddressN/A
ContactsNo contact information available

Full Description

Show more
Provide quality assurance and First Article Testing (FAT) support for production validation, though FAT is not currently required; experience is being solicited for potential future needs.

More opportunities from Department Of Defense → W6QK Acc- Dta

Same awarding agency

NAICS: 332994
New
Federal
60 MM Mortar Mount
Solicitation # W912CH-27-R-A026
The United States Army Contracting Command Detroit Arsenal is soliciting a two-year, Firm-Fixed Price requirement contract for the procurement of 60 MM Mortar Mounts, identified by NSN 1010-01-561-9234 and part number 13017350. This procurement is a Small Business Set-Aside under NAICS code 332994. The scope of work includes the production of 118 units for the first year and an option for an additional 118 units in the second year. Key deliverables include the hardware, an Acceptance Inspection Equipment Report, and a First Article Test Report. The delivery schedule is the primary evaluation factor and is considered significantly more important than price, with higher ratings awarded to proposals that can deliver 30 or more days sooner than the solicited schedule. Access to the associated Technical Data Package is restricted to U.S. Government agencies and contractors with a Distribution Code D and requires certification under the United States/Canada Joint Certification Program. Contractors must comply with strict Controlled Unclassified Information guidelines, including mandatory DoD training and the signing of non-disclosure agreements. Packaging and marking must adhere to MIL-STD-2073-1 and MIL-STD-129, with inspection and acceptance of supplies occurring at the point of origin. Invoicing and payment will be processed electronically through the Wide Area Workflow system. Proposals must be submitted via email to the designated Contract Specialist by the specified deadline.
Small Arms, Ordnance, and Ordnance Accessories Manufacturing

POSTED

2 days ago

DEADLINE

in 15 days
View Details
NAICS: 336992
New
Federal
RECHARGE KIT, VALVE 4210-01-483-9758
Solicitation # W912CH27BA014_SourcesSought
The Army Contracting Command Detroit Arsenal is conducting market research through a Sources Sought Notice, solicitation number W912CH27BA014, to identify qualified vendors for the manufacture of Valve Recharge Kits, NSN 4210-01-483-9758, part number 579K4036. These kits are essential for servicing and resetting fire suppression systems within the M1 Abrams Family of Vehicles. This effort is for government planning purposes only and is not a formal solicitation for proposals. The government is seeking information from both small and large businesses under NAICS code 336992 to determine interest, capabilities, and production lead times. Interested respondents must submit a completed market research survey to Contract Specialist Angelo Wilson by November 5, 2026. A critical requirement for accessing the associated Technical Data Package, which is designated as distribution code D, is having a current DD 2345 Military Critical Technical Data Agreement on file with the Defense Logistics Information Service and active registration in the Joint Certification Program. Small businesses must also certify compliance with the nonmanufacturer rule. Responses should include details on quality management systems and production capabilities, with any proprietary information clearly marked as confidential.
Military Armored Vehicle, Tank, and Tank Component Manufacturing

POSTED

2 days ago

DEADLINE

in 8 days
View Details
NAICS: 541715
New
Federal
Sources Sought: Domestically Produced Hand and Measuring Tools (ACC-DTA CSO Amend 40)
Solicitation # W912CH26S0001
The Army Contracting Command – Detroit Arsenal (ACC-DTA) Commercial Solutions Opening (CSO), solicitation W912CH-26-S-0001, serves as a rapid-acquisition gateway to transition cutting-edge commercial technologies into active defense programs. This vehicle supports a diverse customer base, including the Intelligence and Security Command (INSCOM) and six Portfolio Acquisition Executives, focusing on the development, integration, and sustainment of ground vehicle systems to enhance Army modernization and readiness. The CSO utilizes a streamlined, merit-based, multi-phased evaluation process consisting of solution briefs, presentations, and commercial solution proposals. Awards may be issued through 2028 via FAR Part 12 commercial procedures or non-FAR agreements, such as transaction agreements under 10 U.S.C. 4022 and Cooperative Agreements under 31 U.S.C. 6305. The solicitation encompasses various Areas of Interest (AoI) targeting critical capabilities, including the FALCONS prototype for long-range reconnaissance, TIGER Readiness for the Abrams Main Battle Tank engine supply chain, Counter-Unmanned Aircraft Systems (C-UAS) detection, and the Light Tactical Trailer Heavy Chassis (LTT-HC). Funding ceilings for specific prototypes, such as FALCONS, range from 24 million to 30 million dollars depending on the use of government-provided kits. Key requirements include strict adherence to the Buy American Act and Specialty Metals clauses, with a prohibition on reliance on adversarial foreign nations for critical minerals. Technical evaluations focus on mission viability, affordability, and schedule realism, while administrative requirements include SAM registration, a Unique Entity ID, and compliance with NIST SP 800-171 for handling controlled unclassified information.
Research and Development in the Physical, Engineering, and Life Sciences (except Nanotechnology and Biotechnology)

POSTED

2 days ago

DEADLINE

N/A
View Details
NAICS: 336110
New
Federal
Infantry Squad Vehicle Follow-On Market Questionnaire
Solicitation # W912CH-27-RFI-ISV-0001
The United States Army, through the Product Director, Ground Mobility Vehicles, is conducting a market survey via Request for Information W912CH-27-RFI-ISV-0001 to identify capable industry partners for the continued development, production, and sustainment of the Infantry Squad Vehicle family. The initiative focuses on two primary platforms: the ISV-9, designed for a nine-soldier squad, and the ISV-Utility, designed for a five-soldier squad with a cargo utility bed. The government intends to procure a total potential quantity of approximately 20,787 vehicles, with a target contract award in July 2028 and initial deliveries anticipated to begin in the fourth quarter of Fiscal Year 2029. This RFI is used to assess the industrial base's capacity and determine the optimal acquisition strategy. Key technical requirements include compliance with Federal Motor Vehicle Safety Standards for roll-over protection, adherence to MIL-STD-814 and MIL-STD-209K for tie-down provisions, and transportability dimensions defined by MIL-STD-1366 and MIL-HDBK-1791. The government requires unlimited rights to all form, fit, and function data, as well as all training and maintenance materials. Interested respondents must be registered in the System for Award Management and provide detailed information regarding their socioeconomic status, security capabilities for handling Controlled Unclassified Information, and experience with Automotive Industry Action Group quality tools. Responses are due by November 25, 2026.
Automobile and Light Duty Motor Vehicle Manufacturing

POSTED

2 days ago

DEADLINE

in 28 days
View Details
NAICS: 339115
New
Federal
Invitation for Bids - Vision Correction Assembly
Solicitation # W912CH26BA014
The Army Contracting Command - Detroit Arsenal is soliciting bids for a five-year, Firm-Fixed-Price, Indefinite Delivery/Indefinite Quantity (IDIQ) contract for the manufacture and delivery of the Vision Correction Assembly, identified by NSN 4240-01-631-8044 and Part Number 5-1-4208. This non-commercial requirement involves production based on a Government-owned Technical Data Package (TDP) with Distribution Statement D export controls, requiring offerors to have a valid DD Form 2345 certification. The contract includes a guaranteed five-year minimum quantity of 30,690 units, with a maximum estimated quantity of 1,216,196 units. Key performance requirements include First Article Testing of 200 units, Production Lot Testing, and adherence to ISO 9001:2015 quality standards. The government intends to award a single contract to the responsible bidder offering the lowest total price, evaluated across five ordering years and a First Article Test Report. Bids must be submitted electronically by November 13, 2026, with a virtual bid opening scheduled for November 18, 2026. Deliveries are designated as FOB Destination to the Blue Grass Army Depot in Kentucky. Contractors are required to utilize the Wide Area WorkFlow system for invoicing and must comply with strict packaging and marking standards, including MIL-STD-129 and MIL-STD-2073-1. Access to the TDP may further require a Use and Non-Disclosure Agreement.
Ophthalmic Goods Manufacturing

POSTED

5 days ago

DEADLINE

in 16 days
View Details

Earlier notices in this NAICS code

Posted before this notice, open and closed

Find Active Opportunities Like This

Get AI-powered intelligence on the opportunities still open

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 750+ contractors already using CLEATUS