This Subcontract opportunity from Department Of Defense was posted on July 13, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

Domestic Material Sourcing and Supplier Coordination

Closed

Federal

Submission Closed07/16/2026, 01:00:00 PM EDT

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 331110

New

Federal

Ferrium, Round Bar, for 81MM M54 Mortar, for the Watervliet Arsenal

Solicitation # W911PT26QA127

The Department of Defense, through the ACC Watervliet Arsenal, is soliciting the procurement of 750 pounds of Ferrium M54 Round Bar for use in 81MM M54 Mortars. The material must be tempered, normalized, and polished, with a diameter of 5 inches (+0.025 / -0.00) and minimum lengths of 63 inches, adhering to AMS 6516 standards. This is a total small business set-aside acquisition under NAICS code 331110. The contract is an all-or-none requirement, meaning only one award will be made to a contractor capable of providing the full quantity. Delivery is required within 90 calendar days from the date of award receipt, with FOB Destination terms. Award will be based on the lowest evaluated bid that meets all material requirements and responsibility criteria. Key technical requirements include the submission of a Certified Test Report (CTR) for chemical and mechanical tests and the marking of specific heat numbers on each article if the lot contains multiple heats. The contractor must comply with MIL-STD-130 for unique item identification using two-dimensional data matrix symbology and MIL-STD-129 for shipment labeling. Payment and receiving reports must be processed electronically through the Wide Area WorkFlow (WAWF) system. Additionally, the contractor must adhere to strict security protocols regarding the release of DoD specifications and critical military technology.

POSTED

DEADLINE

Solicitation # SPE8E4-27-T-0290

DDSP NEW CUMBERLAND FACILITY

POSTED

DEADLINE

Solicitation # SPE8E9-27-T-0479

CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

DEADLINE

High-Temperature Alloy SupplyThe High-Temperature Alloy Supply subcontract involves the sourcing and delivery of certified aerospace-grade superalloys, including Inconel and Hastelloy, to support prime contractors on DLA Aviation projects. The scope of work focuses on providing raw material billets, sheets, or tubes that strictly adhere to J85 afterburner material specifications and broader aerospace material standards. To ensure quality and compliance, the provider must supply Mill Test Reports with all certified raw material shipments. Managed under the Department of Defense for DLA Aviation at Oklahoma City, this opportunity falls under NAICS code 331110. The solicitation was posted on November 9, 2026, with a response deadline set for December 7, 2026.

Ok DLA Aviation At Oklahoma City

POSTED

DEADLINE

8082 Welded Steel Pipe and Appurtenances - De Soto Trunk Line Project

Solicitation # 232978

POSTED

DEADLINE

Supply of Raw Material for Spline Nut ProductionThis subcontract involves the supply of raw metal stock for prime contractors working on DLA Weapons Support ASC projects, specifically for spline nut production. The provider is responsible for sourcing and smelting alloy or steel that adheres to the technical specifications of NSN 5310-00-109-9007. To ensure quality and compliance, the contractor must provide Material Test Reports certifying the chemical and physical properties of the delivered stock. The contract mandates strict adherence to the Buy American Act and requires full ITAR and EAR compliance regarding the handling of technical data. Performance for this Department of Defense requirement is centered in San Diego, California, under NAICS code 331110.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

Supply of Berry Amendment Compliant Alloy/Steel for Snap Hook FabricationThis subcontract involves the sourcing and smelting of high-strength alloy or steel raw metal stock for prime contractors supporting the DLA Weapons Support Land Supply Chain. Specifically targeting NSN 5340-01-645-9819 for snap hook fabrication, the provider must ensure all materials are in strict compliance with the Berry Amendment and the Buy American Act. To verify adherence to technical specifications, the contractor is required to deliver certified raw material stock accompanied by Material Test Reports and Certificates of Conformance. The opportunity is designated as a Service-Disabled Veteran-Owned Small Business set-aside under NAICS code 331110. Performance for this Department of Defense project will take place in Tracy, California. Interested parties must respond by November 19, 2026.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

DEADLINE

Supply of Specialized Alloy/Steel for Plate Nut FabricationThis subcontract, issued by the Department of Defense under the DLA Weapons Support ASC Commodities Division, involves the supply of specialized alloy or steel for plate nut fabrication. The contractor is responsible for sourcing and rolling metal bars, wire, or plates to the specific grade and hardness required for NSN 5310-01-501-8098. Key deliverables include the provision of Mill Test Reports for material certification and the delivery of raw metal stock directly to the manufacturer. The project is designated as a Total Small Business Set-Aside under FAR 19.5 and falls under NAICS code 331110. Compliance with the Buy American Act is mandatory for all materials provided. Performance for this contract will take place in New Cumberland, Pennsylvania.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

Supply of Raw Material for NSN 5310-00-534-2444This subcontract involves the supply of raw metal stock for prime contractors working on DLA Weapons Support ASC projects. The selected provider is responsible for sourcing and certifying specialty alloy or steel bars, wire, or blanks that strictly adhere to the metallurgical specifications of NSN 5310-00-534-2444. A critical requirement of the contract is the provision of Material Test Reports to verify all chemical and physical properties, and all materials must comply with the Buy American Act. The contract is managed by the Department of Defense under the DLA Weapons Support ASC Commodities Division, with performance taking place in Anniston. Falling under NAICS code 331110, the scope of work concludes with the delivery of certified raw material stock directly to the manufacturer. Interested parties must note the response deadline of November 16, 2026.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

Supply of Carbon Steel Stock for Hydraulic FittingsThis subcontract involves the supply of raw carbon steel stock and billets for prime contractors working on projects for the Department of Defense, specifically the DLA Weapons Support Fluid Handling Division. The materials must strictly adhere to the metallurgical requirements of MIL-DTL-18866K(1), and the provider is required to furnish material certifications and Mill Test Reports to guarantee full traceability and compliance with military specifications. The performance of this contract is centered in San Diego, California, under NAICS code 331110. Interested parties must note the response deadline of November 19, 2026, for this procurement effort focused on providing essential materials for hydraulic fittings.

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

DEADLINE

Solicitation # SPE7L1-27-T-4412

Solicitation SPE7L1-27-T-4412, issued by the DLA Weapons Support Land Supply Chain, is a small business set-aside for the procurement of 93 units of Turnbuckle Body (Clip Locking), identified by NSN 5340-00-4119859 and part number MS21251-A2S. The items must be manufactured in accordance with basic specification MIL-DTL-8878M and reference specification MS21251M(2). Delivery is required within 165 days after order, with the destination and inspection points set at the DLA Distribution New Cumberland facility in Pennsylvania. The contract mandates strict quality and technical adherence, including the use of the Qualified Products List (QPL) or Qualified Manufacturers List (QML). Sampling must follow MIL-STD-1916 or ASQ H1331, and all packaging must comply with MIL-STD-129 and RP001, with specific prohibitions against Class I ozone depleting chemicals and hexavalent chromium. Administrative requirements include the use of the Wide Area Workflow (WAWF) system for invoicing and compliance with DFARS cybersecurity and safeguarding standards.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

DEADLINE

Raw Material Supply for Close Tolerance FastenersThis subcontract involves the supply of raw metal stock for prime contractors working on DLA Weapons Support ASC projects. The scope of work requires the provision of high-grade alloy or specialty steel wire, bar, or rod that adheres to the specific chemical and physical properties required for NSN 5305-01-167-9755. To ensure quality and traceability, all delivered materials must be accompanied by Material Test Reports and maintain full compliance with the Buy American Act. The project is managed under the Department of Defense through the DLA Weapons Support ASC Commodities Division, with performance taking place in New Cumberland. Interested parties must respond by November 13, 2026, for this requirement categorized under NAICS code 331110.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

4 days ago

DEADLINE

in 3 days

AI Contract Overview

The contract requires the supply of domestically sourced raw materials, including specialty metals, to support the production of shaft assemblies, ensuring full compliance with the Buy American Act and the Berry Amendment. All materials must originate from the United States, with strict adherence to domestic content requirements, and the supplier is responsible for verifying and documenting the origin and compliance of each component. The work is tied to a subcontract under the Department of Defense’s ASC Commodities Division, with performance centered at the facility in New Cumberland, Pennsylvania, ZIP code 17070-5002. The North American Industry Classification System code 331110 indicates the focus is on steel mill and other steel product manufacturing operations. Offers must be submitted by the deadline of July 16, 2026, and the solicitation is publicly accessible via the DIBBS platform. The contract emphasizes domestic supply chain integrity and imposes clear obligations on vendors to maintain traceability and regulatory compliance throughout the material sourcing and delivery process.