Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, July 22 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

DOOR, ACCESS, AIRCRAF

Active
SPE4A7-26-T-577HFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract pertains to the procurement of five units of a door assembly for aircraft, identified by NSN 1560-00-779-6874, under solicitation SPE4A7-26-T-577H, with a response deadline of July 24, 2026, and a delivery requirement of 467 days after award. The item falls under NAICS code 336413 and is procured by the Department of Defense through the ASC Supplier Oper AE and AF Division. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with specific references to cybersecurity compliance under CMMC Level 2 for third-party assessors, physical identification and bare item marking, and tailored higher-level quality expectations applicable to both manufacturers and non-manufacturers. Configuration change management requires formal engineering change proposals and variance requests. Inspection and acceptance must occur at the origin, and government identification must be removed from non-accepted supplies. The contract enforces strict export control compliance under ITAR or EAR regulations, prohibiting unauthorized disclosure of technical data to foreign persons regardless of location, and applies equally to U.S. companies and their foreign subsidiaries. Access to controlled technical data is restricted to contractors with approved US/Canada Joint Certification Program status, completed DOD export control training, and approval from the DLA controlling authority. Item Unique Identification is explicitly not required per DFARS 252.211-7003(c)(1)(i) at the request of the service customer. Packaging must comply with DLA standards, and covered defense information is subject to applicable cybersecurity protocols. All deliverables are to be shipped to New Cumberland, Pennsylvania, and the primary point of contact is Erica Adams of DLA.

General Info

Procure five aircraft door assemblies under ITAR/EAR, CMMC Level 2, delivered to Pennsylvania by 467 days post-award.

Agency

Department Of Defense → ASC SUPPLIER OPER AE AND AF DIVView Agency

NAICS

336413 - Other Aircraft Parts and Auxiliary Equipment ManufacturingView NAICS

Place of Performance

2083 NORMANDY DRIVE DOOR 113 TO 134, NEW CUMBERLAND, PA, 17070-5002, US

Set-Aside

NONE

Documents

(1)

RFQ SPE4A7-26-T-577H Request for Quotations

PDF•rfq

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → ASC SUPPLIER OPER AE AND AF DIV
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → ASC SUPPLIER OPER AE AND AF DIV
View Agency Profile
Office AddressUS
Contacts
Erica Adams
contact@example.gov

Full Description

Show more
DOOR,ACCESS,AIRCRAF
DOOR,ACCESS,AIRCAFT
RD005: Cybersecurity Maturity Model Certification (CMMC) Level 2 Certified Third-Party Assessment Organization (C3PAO) RQ017: PHYSICAL INDENTIFICATION/BARE ITEM MARKING
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RD002, COVERED DEFENSE INFORMATION APPLIES
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ001: TAILORED HIGHER LEVEL CONTRACT QUALITY REQUIREMENTS
(MANUFACTURERS AND NON-MANUFACTURERS)
RQ002: CONFIGURATION CHANGE MANAGEMENT ENGINEERING CHANGE PROPOSAL
REQUEST FOR VARIANCE (DEVIATION OR WAIVER)
RQ009: INSPECTION AND ACCEPTANCE AT ORIGIN
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
Item Unique Identification is not required by request of the Service customer. DFARS 252.211-7003(c)(1)(i) applies.
RQ032: EXPORT CONTROL OF TECHNICAL DATA
This item has technical data some or all of which is subject to export-control of either the International Traffic in Arms regulations (ITAR) or the Export Administration Regulations (EAR), and cannot be exported without prior authorization from either the Department of State or the Department of Commerce. Export includes disclosure of technical data to foreign persons and nationals whether located in the United States or abroad. This requirement applies equally to foreign national employees and U.S. companies and their foreign subsidiaries. DFARS 252.225-7048 is applicable to this data.
The Defense Logistics Agency (DLA) limits distribution of export-control technical data to DLA contractors that have an approved US/Canada Joint Certification Program (JCP) certification, have completed the Introduction to Proper Handling of DOD Export-Controlled Technical Data Training and the DLA Export-Controlled Technical Data Questionnaire (both are available at the web address given below), and have been approved by the DLA controlling authority to access the export-controlled data. NSN/Part Number: 1560-00-779-6874 Quantity: 5 EA Purchase Request: 7017529049QTY: 5 Delivery: 467 days ADO

Similar Contracts

NAICS: 336413
New
DIBBS
COLLAR, SHOCK STRUTThe contract specifies the procurement of a COLLAR, SHOCK STRUT with part number 65257-07033-101 and NSN 1620-00-450-9970, for a quantity of eight units at a unit price of $8.00, totaling $64.00. Delivery is required within five days from the origin point under FOB terms, with no variance allowed in quantity. Inspection and acceptance occur at the origin, and packaging must comply with MIL-STD-2073-1E and MIL-STD-129, including specific packaging codes and methods for preservation and containment. The item must be marked according to government standards with no special marking required, and palletization must adhere to DLA packaging requirements. The supplier is SIKORSKY AIRCRAFT CORPORATION, CAGE 78286, and an alternate sampling plan per QAP 1201 is accepted, which must meet or exceed ASQ H1331 or MIL-STD-1916 standards. Cybersecurity requirements mandate a CMMC Level 2 Self-Assessment, and the contractor must comply with DLA’s technical and quality requirements as defined in the DLA Master List. The item is destined for the Government of Israel, Ministry of Defense, and the delivery must be completed no later than July 10, 2026. All contractual obligations are governed by the DLA solicitation SPE4A6-26-T-04UH, with a response deadline of July 21, 2026.
ASC COMMODITIES DIVISION

POSTED

about 21 hours ago

DEADLINE

in 4 days
View Details
NAICS: 336413
New
DIBBS
FORMER, AIRCRAFTThe contract pertains to the procurement of 38 units of a former aircraft item identified by part number 35-10704-507 and NSN 1560-01-151-9514, with a delivery requirement of 231 days after award. Technical and quality requirements referenced in this solicitation are governed by the DLA Master List of Technical and Quality Requirements, with revisions effective on the solicitation issue or award date depending on acquisition type. The item is subject to stringent cybersecurity and export controls; the seller must be a Cybersecurity Maturity Model Certification Level 2 Certified Third-Party Assessment Organization and comply with documentation mandates including Configuration Change Management, Inspection and Acceptance at Origin, and Removal of Government Identification from non-accepted supplies. Item Unique Identification is waived at the request of the Service customer. Export-controlled technical data associated with this item is governed by ITAR or EAR regulations, and access is restricted to DLA contractors who hold an approved US/Canada Joint Certification Program certification, have completed mandatory DOD export control training, and have been specifically authorized by DLA. Packaging must adhere to DLA standards, and all documentation for source approval must be submitted as required. The solicitation, issued under reference SPE4A7-26-T-560J, was posted on July 16, 2026, with responses due by July 21, 2026, and performance is to be delivered to Tinker AFB, Oklahoma, under the oversight of the Department of Defense’s ASC Supplier Oper AE and AF Division.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 21 hours ago

DEADLINE

in 4 days
View Details
NAICS: 336413
New
DIBBS
STRUCTURAL ASSY, AIRThe contract pertains to a Structural Assembly, Air with part number 70219-42430-047 and NSN 1560012520366, for a quantity of five units, to be delivered FOB origin within 170 days. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with specific provisions such as supply chain traceability documentation per DLAD Procurement Note C03, configuration change management via Engineering Change Proposal or variance requests, and physical identification of bare items as required. The contractor must comply with DLA packaging standards per RP001, including MIL-STD-129 labeling, and must package in accordance with ASTM D3951 if non-hazardous or FED-STD-313 if hazardous, with DLA requirements overriding any conflicting standards. Sampling is subject to Sikorsky Corporation's alternate plan QAP 1201, which must meet or exceed ASQ H1331 or MIL-STD-1916. Inspection and acceptance occur at the destination, with no variance permitted in quantity. The item is classified as a Critical Application Item, and while Item Unique Identification is not required, the contractor must maintain supply chain traceability records. Quality management must conform to ISO 9001:2015 for both manufacturers and non-manufacturers, and cybersecurity compliance requires a CMMC Level 2 self-assessment. Measuring and test equipment must be calibrated and documented per RT001. Delivery is to the DLA Distribution Center in New Cumberland, PA, with the original required delivery date of November 27, 2027, and a needed ship date of January 3, 2027. The contract is issued under solicitation SPE4A5-26-T-281A, with primary point of contact Stephanie Hewlett.
ASC SUPPLIER OPER OEM DIVISION

POSTED

about 21 hours ago

DEADLINE

in 4 days
View Details
NAICS: 336413
New
DIBBS
SKI, LANDING GEAR, HEThe contract pertains to the procurement of two ski landing gear components, identified by part number L20500-1R and NSN 1630017142252, under solicitation SPE4A7-26-T-561V. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with revisions effective as of the solicitation or award date depending on acquisition size, and supersede any commercial standards such as ASTM D3951. Key requirements include adherence to MIL-STD-1916 or ASQ H1331 for sampling, with zero non-conformances mandated unless otherwise specified, and critical attributes assigned verification levels VII or an AQL of 0.1. Configuration changes require formal engineering change proposals or variance requests, and all items must be inspected and accepted at origin. Packaging must comply with DLA-specific standards RP001 and MIL-STD-129, with hazardous materials following TQ requirement IP025 and non-hazardous items handled per DLA requirements even if commercial packaging is used. Items must be marked with bare item identification and government identifiers removed from non-accepted supplies. Delivery is required FOB origin within 23 days of contract award, with a firm delivery date of August 9, 2026, and an original required delivery date of January 9, 2027. The quantity is fixed at two units with no tolerance for variance. The unit of issue is each (EA), and palletization must align with DLA packaging guidelines. The delivery destination is DLA District San Joaquin, Tracy, California, with transportation instructions governed by DLAD Proc Notes C19 and C20. All documentation must reflect approved source approval requests, quality assurance provisions, and measurement equipment standards as referenced in the DLA Master List. The point of contact for inquiries is April Reed, and the solicitation was issued on July 16, 2026, with responses due by July 21, 2026, under NAICS code 336413 for aircraft landing gear manufacturing.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 21 hours ago

DEADLINE

in 4 days
View Details
NAICS: 336413
New
DIBBS
WINDOW PANEL, AIRCRA
ASC SUPPLIER OPER OEM DIVISION

POSTED

about 21 hours ago

DEADLINE

in 7 days
View Details