Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, July 22 at 2:00 PM EDT

Register Free →

DOOR, ACCESS, UTILITY

Active
SPE7L1-26-T-843TFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract involves the procurement of 13 units of DOOR, ACCESS, UTILITY with a delivery requirement of 237 days after award, to be shipped FOB Destination to New Cumberland, PA, 17070-5002. The solicitation number is SPE7L1-26-T-843T, issued on July 16, 2026, with responses due by July 27, 2026, and is administered through the Department of Defense’s Land Supply Chain under NAICS code 332510. All delivered items must comply with strict packaging, marking, and labeling standards including MIL-STD-2073-1E for packaging, MIL-STD-129 for shipment and storage markings, and MIL-STD-130N for identification marking of U.S. military property, which mandates Data Matrix barcodes for traceability. Hazardous materials must be identified, labeled, and documented per 29 CFR 1910.1200, with offerors required to submit pre-award hazard warning labels and Safety Data Sheets unless exempted under FIFRA, FDCA, CPSA, FHSA, or FAA Act. Packaging must follow DLA-specific requirements outlined in RP001, with preservation method 10 (CLNG/DRY) applicable, and no cushioning or dunnage materials are to be used. Inspection and acceptance occur at the destination under FAR 52.246-2, with the contractor responsible for full compliance with technical and quality standards referenced in the DLA Master List, accessible via the provided URL. The contract includes mandatory clauses for safeguarding covered defense information (252.204-7012), NIST SP 800-171 compliance (252.240-7997), combating human trafficking, employment eligibility verification, sustainable products, and cybersecurity incident reporting. The DLA requires electronic invoicing exclusively through Wide Area WorkFlow (WAWF), and the contractor must report UEI and CAGE codes for covered defense telecommunications equipment if applicable. Offerors must certify their small business status, including potential HUBZone, WOSB, or SDVOSB classifications, and disclose joint venture partners’ UEIs if applying for socioeconomic set-asides. The contract has no stated monetary value due to incomplete or fragmented pricing data in Section B

General Info

Procure 13 units of DOOR, ACCESS, UTILITY; deliver FOB Destination to New Cumberland, PA, in 237 days; comply with MIL-STD and cybersecurity requirements.

Agency

Department Of Defense → LAND SUPPLY CHAINView Agency

NAICS

332510 - Hardware ManufacturingView NAICS

Place of Performance

2083 NORMANDY DRIVE DOOR 113 TO 134, NEW CUMBERLAND, PA, 17070-5002, US

Set-Aside

NONE

Documents

(1)

RFQ SPE7L1-26-T-843T for DLA Land and Maritime

PDFrfq

AI Contract Breakdown

Uniform Contract Format

Sign up to view the full breakdown with detailed analysis of each section.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → LAND SUPPLY CHAIN
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → LAND SUPPLY CHAIN
View Agency Profile
Office AddressUS

Full Description

Show more
DOOR,ACCESS,UTILITY
DOOR, ACCESS
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
MIL-STD-130N, 16 Nov 2012 IDENTIFICATION MARKING OF U.S. MILITARY PROPERTY THE PROCUREMENT AGENCY HAS DATA ADEQUATE FOR NSN/Part Number: 5340-01-206-0834 Quantity: 13 EA Purchase Request: 7017528156QTY: 13 Delivery: 237 days ADO

Similar Contracts

NAICS: 332510
New
DIBBS
SPACER, PLATEThe contract is an Indefinite Delivery Contract (IDC) issued by the Defense Logistics Agency under solicitation SPE7LX-26-U-8857 for the supply of SPACER, PLATE with NSN 5365011548580, to be delivered FOB Origin within 132 days of order placement. The estimated quantity is 10 packing groups, though this is clearly noted as non-binding and subject to issuance of individual delivery orders under the IDC framework, with a maximum contract value capped at $350,000. All packaging must comply with ASTM D3951, but the DLA Master List of Technical and Quality Requirements supersedes this standard where applicable. Marking and labeling of all shipments must adhere strictly to MIL-STD-129, including proper unit of issue, quantity per unit pack, barcoding, and data matrix identification, and palletization must follow RP001: DLA Packaging Requirements for Procurement. Inspection and acceptance occur at the destination, with the Government responsible for evaluation upon receipt, and all items must meet the governing technical and quality standards referenced in the DLA Master List. The contract incorporates a comprehensive set of Federal Acquisition Regulation (FAR) and Defense Federal Acquisition Regulation Supplement (DFARS) clauses addressing critical compliance areas including employment eligibility verification, combating human trafficking, sustainable products, hazardous material identification, cybersecurity safeguarding, export controls, and prohibitions on acquiring equipment from Communist Chinese military companies. Special requirements under Section H mandate adherence to OSHA’s Hazard Communication Standard (29 CFR 1910.1200) for hazardous materials, including the maintenance and submission of updated Safety Data Sheets and hazard lists, and require advance written notification for any items containing radioactive materials as defined by 10 CFR thresholds. All contractors must affirm their size status and socioeconomic designations, including Small Business, WOSB, SDVOSB, HUBZone, or 8(a) status, and are required to provide their Unique Entity ID and CAGE code if supplying covered defense telecommunications equipment. Invoicing and payment must be processed exclusively through Wide Area WorkFlow (WAWF), and electronic submission of quotes is mandatory via DIBBS by the July 31, 2026 deadline. No specific unit pricing is provided in the CLIN, and there are no option quantities, extensions, or performance milestones beyond standard delivery and compliance requirements.
STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

1 day ago

DEADLINE

in 14 days
View Details
NAICS: 332510
New
DIBBS
SPACER, RINGThe contract is for a single SPACER, RING part with part number CC-1032-21 supplied by CORNELL-CARR CO., INC. CAGE 21204, under NSN 5365014258582. The item is classified as a critical application item and must comply with all technical and quality requirements referenced from the DLA Master List of Technical and Quality Requirements, incorporating specifications identified by R or I numbers. The supplier must ensure no intentional introduction of mercury or mercury-containing compounds into the part, except for specified functional applications such as batteries, fluorescent lights, sensors, or chemical reagents approved by NAVSEA, with additional containment and shockproofing requirements for portable devices. Sampling must follow MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances allowed unless otherwise stated, and all attributes are assigned verification levels or AQLs as defined in the contract. Packaging must adhere to MIL-STD-2073-1E with specific methods for preservation, wrapping, and containment, and marking must comply with MIL-STD-129 without special markings. The item is to be delivered FOB destination within 20 days of contract award, with zero tolerance for quantity variance. Delivery must be made via traceable freight shipping to the designated military address, explicitly prohibiting parcel post. The required delivery date is June 29, 2026, with a solicitation response deadline of July 24, 2026, and the contract is issued under the U.S. Department of Defense for use by the ASC SUPPLIER OPER AE AND AF DIV.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

1 day ago

DEADLINE

in 7 days
View Details
NAICS: 332510
New
DIBBS
MOUNT, RESILIENT, UTILITThis contract involves the procurement of 18 resilient utility mounts identified by NSN 5340-01-177-8693 under solicitation SPE7L1-26-T-841G, with a delivery deadline of 161 days after award. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with revisions controlled by the solicitation or award date depending on acquisition size. Packaging must comply with DLA standards, and any non-accepted supplies must have government identification removed. Sampling follows MIL-STD-1916 or ASQ H1331, Table 1, with zero non-conformances required unless otherwise stated; critical, major, and minor attributes are assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. MERCURY and mercury-containing compounds are strictly prohibited except in specified functional applications such as batteries, fluorescent lamps, sensors, or weapons systems, with portable devices requiring shock-proof design and a secondary containment barrier per NAVSEA 5100-003D. The item carries a TYPE I shelf-life code T with a non-extendable 84-month shelf life per MIL-STD-130N. CLASS I ozone-depleting chemicals are banned, and any substitutes require prior approval. Technical data associated with this item is subject to ITAR or EAR export controls, restricting access to contractors with approved JCP certification, completion of required DOD export training, and DLA approval. Full and open competition applies, and the performance location is New Cumberland, PA, with contact information provided for DLA procurement oversight.
LAND SUPPLY CHAIN

POSTED

1 day ago

DEADLINE

in 10 days
View Details