This Solicitation opportunity from Department Of Defense was posted on September 23, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

DOOR, ACCESS, UTILITY

Closed

SPE7L1-26-T-16A5Federal

Submission Closed10/05/2026, 11:00:00 AM MDT

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 332510

New

Federal

MISC LINE HARDWARE FOR WEST FARGOThe Western Area Power Administration, under the Department of Energy, has issued a forecast for the procurement of miscellaneous line hardware for West Fargo. This requirement is categorized under NAICS code 332510 and is designated as a small business set-aside. The performance of the contract is expected to take place in Oklahoma. The current incumbent contractor for these services is Energy by Native American Design Corp. Interested parties may coordinate with the Small Business Program Managers, specifically Tetrault or Teves, regarding this upcoming opportunity.

Western Area Power Administration

POSTED

DEADLINE

T LINE HARDWARE RESTOCK - PIERRE, SDThe Western Area Power Administration, under the Department of Energy, has issued a forecast for the T Line Hardware Restock project located in Pierre, South Dakota. This procurement is designated as a small business set-aside under NAICS code 332510. The current incumbent contractor for these services is Kinetic Global Tech LLC. The forecast was posted on November 8, 2026, and lists the place of performance in Georgia. Interested parties may coordinate with the Small Business Program Managers, specifically Tetrault or Teves, for further information regarding this acquisition.

Western Area Power Administration

POSTED

DEADLINE

HARDWAREThis forecast for hardware procurement is issued by Federal Prison Industries under the Department of Justice. The project is designated as a Small Business Total Set-aside and falls under NAICS code 332510. Performance for this contract is expected to take place in Baltimore, Maryland. The current incumbent contractor for these services is JG Edelen. Interested parties may coordinate with Stacey Phipps or Small Business Specialist Robert L. Connolly for further information regarding this opportunity.

Inc Federal Prison Industries

POSTED

DEADLINE

Surface Plate Casting and ProductionThis subcontract for the Defense Logistics Agency involves the manufacture of a single finished surface plate for prime contractors. The scope of work includes metal casting and the development of specific tooling required to produce the component. All items must be packaged according to ASTM D3951 and the DLA Master List of Technical and Quality Requirements. The project is categorized under NAICS code 332510 and will be performed in Johnston, Iowa. To be eligible, the contractor must maintain NIST SP 800-171 compliance and complete a CMMC Level 2 Self-Assessment. Responses to the solicitation are due by November 16, 2026.

Defense Logistics Agency

POSTED

DEADLINE

Loop Clamp Manufacturing and SupplyThis subcontract involves the manufacture or sourcing of 32 loop clamps, part number 7019031310, for prime contractors supporting the DLA Weapons Support Land Supply Chain. The contractor is responsible for ensuring all units meet strict technical specifications and adhere to specific military standards for marking, palletization, and packaging, specifically MIL-STD-129, RP001, and MIL-STD-2073-1E. Additionally, any hazardous items must be labeled in accordance with the Hazard Communication Standard 29 CFR 1910.1200. The final deliverables must be shipped to the DLA Distribution DDSP New Cumberland Facility in New Cumberland. This procurement falls under NAICS code 332510 and is managed under the Department of Defense. The response deadline for this requirement is November 16, 2026.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

DEADLINE

Hinge Assembly Fabrication and SupplyThis subcontract involves the fabrication and supply of five hinge assembly units, identified by NSN 5340014718518, for prime contractors under the Department of Defense DLA Weapons Support ASC Supplier Oper OEM Division. The selected provider must manufacture the hardware according to strict technical specifications, utilizing MIL-STD-1916 for sampling and quality inspection, while adhering to MIL-STD-2073-1E and MIL-STD-129 for packaging and marking. Performance of the contract will take place in San Diego, California. To be eligible, the contractor must maintain ISO 9001:2015 certification and ensure CMMC Level 2 compliance. Additionally, the submission of Source Approval Request documentation is required. The solicitation was posted on November 6, 2026, with a response deadline of November 13, 2026, falling under NAICS code 332510.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

DEADLINE

Supply of Wire Strand Band (P/N 79/15VZ)This subcontract involves the supply of a high-precision wire strand band, part number 79/15VZ manufactured by Lex Products, LLC, for prime contractors supporting the DLA Weapons Support ASC Commodities Division. The scope of work requires strict adherence to military standards, specifically MIL-STD-129 for marking and MIL-STD-2073-1E for packaging. The contract specifies the delivery of one unit on a FOB Origin basis with a required delivery timeframe of five days. Performance is associated with NAICS code 332510 and is centered in Tampa, Florida, under the oversight of the Department of Defense.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

Supply of Machine Bolts (NSN 5306991144430)This subcontract involves the supply of 38 units of machine bolts, identified by NSN 5306991144430, for prime contractors supporting the DLA Weapons Support ASC Commodities Division. The supplier must ensure all units meet specific material specifications and adhere to strict packaging and labeling standards, including ASTM D3951, MIL-STD-129, and RP001 DLA Packaging Requirements. Additionally, the contractor is required to comply with all DPAS rating requirements to ensure prioritized delivery. The completed order is to be delivered FOB Origin to the DLA Distribution Depot Oklahoma located at Tinker AFB. This procurement falls under NAICS code 332510 and is managed by the Department of Defense.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

Manufacturing of Straight Headed Pins (NSN 5315-0119-17595)This subcontract involves the manufacture of straight headed pins under NSN 5315-0119-17595 for the Department of Defense, specifically supporting DLA Weapons Support ASC projects. The selected contractor must utilize precision machining and forming equipment to fabricate the pins and ensure strict adherence to quality control and sampling standards per MIL-STD-1916 or ASQ H1331. Compliance with the Buy American Act is mandatory, and the provider must hold either SAE AS9003 or ISO 9001 certification. The scope of work requires the delivery of five finished pins FOB Origin to the DLA Distribution DDSP New Cumberland Facility. This opportunity falls under NAICS code 332510 and was posted by the DLA Weapons Support ASC Supplier OEM Division. Interested parties must submit their responses by November 13, 2026.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

DEADLINE

Loop Clamp SupplierThis subcontract involves the supply of loop clamps for prime contractors working on DLA Weapons Support ASC projects under the Department of Defense. The selected supplier is responsible for manufacturing or sourcing a specific loop clamp, NSN 5340-01-612-5776, ensuring it adheres to the DLA Master List of Technical and Quality Requirements. All items must be packaged according to MIL-STD-2073-1E and marked in accordance with MIL-STD-129. The contract requires the delivery of the completed hardware components to the designated destination point within 20 days of the award. Performance will take place in Lenoir, North Carolina, under NAICS code 332510. Interested parties must respond by the deadline of November 13, 2026.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

DEADLINE

Mounting Bracket Fabrication (NSN 5340-01-386784-1)This subcontract, issued by the DLA Weapons Support Land Supply Chain under the Department of Defense, requires the fabrication and supply of 28 mounting brackets identified as NSN 5340-01-386784-1. The project involves utilizing casting and forging processes with specialized tooling to produce units that meet Critical Application Item quality standards. Performance will take place in New Cumberland, Pennsylvania, under NAICS code 332510. The opportunity is designated as a Service-Disabled Veteran-Owned Small Business set-aside. A critical requirement for the contractor is strict compliance with NIST SP 800-171 standards to ensure the proper safeguarding of covered defense information. The solicitation was posted on November 6, 2026, with a response deadline of November 16, 2026.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

DEADLINE

Supply of Butt Hinges (NSN 5340-01-710-4966)This subcontract involves the supply of 8 units of butt hinges, part number 148T8221U7, to support prime contractors under DLA supply contracts. The parts must be sourced according to Boeing specifications and undergo sampling in accordance with MIL-STD-1916 or ASQ H1331. Packaging and marking must strictly adhere to MIL-STD-2073-1E and MIL-STD-129 standards. The contractor is required to maintain SAE AS9100 quality standards and possess FAA Airworthiness Approval. The final delivery of the marked and packaged units is designated as FOB Origin, with the destination being DLA Distribution DDSP New Cumberland. This procurement is managed by the DLA Weapons Support Land Supply Chain under the Department of Defense.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

2 days ago

DEADLINE

in 8 days

AI Contract Overview

Solicitation SPE7L1-26-T-16A5 is a request for quotations issued by the DLA Land and Maritime Land Supply Chain for the procurement of one utility access door, identified by NSN 5340-01-629-6102. The requirement specifies a delivery timeline of 10 days after order, with a required delivery date of September 2, 2026, shipping to Fort Carson, Colorado. Offers must be submitted via the DIBBS system based on FOB Origin terms. The procurement is subject to full and open competition, with price evaluation preferences available for certified HUBZone Small Business Concerns. Technical compliance requires adherence to a comprehensive Technical Data Package and specific military standards, including MIL-STD-130N for identification marking and MIL-STD-129 for packaging and labeling. Quality assurance is governed by MIL-STD-1916 or ASQ H1331 sampling plans, with a zero-non-conformance requirement for acceptance. Key restrictions include a prohibition on Class I ozone-depleting chemicals and the use of additive manufacturing unless authorized. The contract also mandates compliance with CMMC Level 2 cybersecurity standards and requires the use of the Wide Area WorkFlow system for all electronic invoicing and payment requests.

General Info

DLA seeks one utility access door for Fort Carson by September 2, 2026.

Agency

Department Of Defense → LAND SUPPLY CHAIN

NAICS

332510 - Hardware Manufacturing

Place of Performance

4885 CHILES AVE, FORT CARSON, CO, 80913-4093, USA

Set-Aside

NONE

Documents

rfq

High

AI Contract Breakdown

Uniform Contract Format

Timeline

PhaseClosed

PostedSep 23

Solicitation

Response DeadlineOct 5

Deadline has passed

Submission Closed

10/05/2026, 11:00:00 AM MDT

Find active opportunities like this

Get full access to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyDepartment Of Defense → LAND SUPPLY CHAIN

Contacts1 person available

OfficeUSA

Organization / AgencyDepartment Of Defense → LAND SUPPLY CHAIN

Office AddressUSA

Contacts

MICHAEL NORDAHL

contact@example.gov

+1 (555) 000-0000

Full Description

DOOR,ACCESS,UTILITY
DOOR,ACCESS,UTILITY
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RD005: Cybersecurity Maturity Model Certification (CMMC) Level 2 Certified Third-Party Assessment Organization (C3PAO)
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
THE DRAWING(S) LISTED BELOW ARE AVAILABLE AT
DLA DURING "OPEN SOLICITATION ONLY".
TO RECEIVE A COPY OF THE DRAWING(S)<(>,<)>
FOR EBS SOLICITATIONS USE URL
HTTPS://WWW.DIBBS.BSM.DLA.MIL/RFQ/
SOURCE INSPECTION REQUIRED.
FULL AND OPEN COMPETITION APPLY
RQ002: CONFIGURATION CHANGE MANAGEMENT ENGINEERING CHANGE PROPOSAL
REQUEST FOR VARIANCE (DEVIATION OR WAIVER)
CLASS I OZONE DEPLETING CHEMICALS ARE NOT TO BE
USED NOR INCORPORATED IN ANY ITEMS TO BE
DELIVERED UNDER THIS CONTRACT.THIS PROHIBITION
SUPERSEDES ALL SPECIFICATION REQUIREMENTS BUT
SPE7L1-26-T-16A5
SECTION B
DOES NOT ALLEVIATE ANY PRODUCT REQUIREMENTS.
SUBSTITUTE CHEMICALS MUST BE SUBMITTED FOR
APPROVAL UNLESS THEY ARE AUTHORIZED BY THE
SPECIFICATION REQUIREMENTS.
MIL-STD-130N, 16 Nov 2012 IDENTIFICATION MARKING OF U.S. MILITARY PROPERTY
CERTIFICATE OF CONFORMANCE PROCEDURES (FAR 52.246-15) ARE AUTHORIZED, UNLESS WITHELD BY A QUALITY ASSURANCE LETTER OF INSTRUCTION.
RQ036Phosphate Coating Supplier Certification Requirements
RQ003: CONFIGURATION CHANGE MANAGEMENT FOR EDGEWOOD FOR CHEMICAL,
BIOLOGICAL CENTER MATERIALS ENGINEERING CHANGE PROPOSAL REQUEST FOR
VARIANCE (DEVIATION OR WAIVER)
THE ITEM DESCRIBED IN THIS SOLICITATION
IS DEFINED IN WHOLE OR IN PART BY ARMY
DRAWING(S). THESE DRAWING(S) MAY CONTAIN
A PAINT FINISHING REQUIREMENT. WHERE SUCH
REQUIREMENTS ARE SPECIFIED, USE DCSC DRAWING
16236 CS-2300-0001 IN LIEU OF FINISH REQUIRE
MENTS OF THE ARMY DRAWING(S). THIS DRAWING
CONTAINS SPECIFICATIONS FOR CHEMICAL AGENT
RESISTANT COATINGS (CARC), AND ADDITIONAL
INFORMATION RELATING TO HIGH TEMPERATURE
COATINGS.
The following Contract Data Requirements Lists (CDRLs), DD Form 1423s, apply to this procurement. Review the Technical Data Package (TDP) for additional information.
TDP Rev B Gen 3 IAW BASIC DRAWING NR 5B5M3 06A8126100 REVISION NR DTD 05/15/2023 PART PIECE NUMBER:
TDP Rev B Gen 3 IAW REFERENCE DRAWING NR 5B5M3 06A8126101 REVISION NR A DTD 01/12/2026 PART PIECE NUMBER:
TDP Rev B Gen 3 IAW REFERENCE DRAWING NR 5B5M3 06A8126102 REVISION NR DTD 05/15/2023 PART PIECE NUMBER:
TDP Rev B Gen 3 IAW REFERENCE DRAWING NR 5B5M3 06A8126103 REVISION NR DTD 05/15/2023 PART PIECE NUMBER:
TDP Rev B Gen 3 IAW REFERENCE DRAWING NR 5B5M3 06A8126104 REVISION NR DTD 05/10/2023 PART PIECE NUMBER:
TDP Rev B Gen 3 IAW REFERENCE DRAWING NR 5B5M3 06A8126151 REVISION NR DTD 05/11/2023 PART PIECE NUMBER:
TDP Rev B Gen 3 IAW REFERENCE DRAWING NR 5B5M3 06A8126100
SPE7L1-26-T-16A5
SECTION B
REVISION NR DTD 05/15/2023
PART PIECE NUMBER:
TDP Rev B Gen 3 IAW REFERENCE DRAWING NR 5B5M3 06A8126202 REVISION NR DTD 05/11/2023 PART PIECE NUMBER:
TDP Rev B Gen 3 IAW REFERENCE DRAWING NR 5B5M3 06A8165002 REVISION NR DTD 05/10/2023 PART PIECE NUMBER:
TDP Rev B Gen 3 IAW REFERENCE DRAWING NR 5B5M3 06A8165003 REVISION NR DTD 05/10/2023 PART PIECE NUMBER:
TDP Rev B Gen 3 IAW REFERENCE DRAWING NR 5B5M3 06A8165052 REVISION NR DTD 05/11/2023 PART PIECE NUMBER:
TDP Rev B Gen 3 IAW REFERENCE DRAWING NR 5B5M3 06A8165084 REVISION NR DTD 05/10/2023 PART PIECE NUMBER:
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7018186487 0001 EA 1.000
NSN/MATERIAL:5340016296102
DELIVERY (IN DAYS):0010
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA-QUP:001
IF MATERIAL IS CONSIDERED HAZARDOUS IAW FED-STD-313,
PACKAGE IN ACCORDANCE WITH TQ REQUIREMENT IP025.
IF THE MATERIAL IS NOT CONSIDERED HAZARDOUS, IN ACCORDANCE WITH
FED-STD-313, THE MATERIAL SHALL BE COMMERCIALLY PACKAGED IN ACCORDANCE
WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be
SPE7L1-26-T-16A5
SECTION B
PR: 7018186487 PRLI: 0001 CONT’D
as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
BULK BREAK POINT:
W80BTZ
0068 CS BN CO A COMPOSITE
MF CENTRAL RECEIVING POINT BLDG 330
4885 CHILES AVE
FORT CARSON CO 80913-4093
US
RDD(3-POS RDD)/ANMCS SHIPMENT. SHIP BY FASTAST TRACEABLE MEANS. DO NOT USE PARCEL POST.
FREIGHT SHIPPING ADDRESS:
W80BTZ
0068 CS BN CO A COMPOSITE
MF CENTRAL RECEIVING POINT BLDG 330
4885 CHILES AVE
FORT CARSON CO 80913-4093
US
MARKFOR
W80BTZ
0068 CS BN CO A COMPOSITE
MF CENTRAL RECEIVING POINT BLDG 330
4885 CHILES AVE
FORT CARSON CO 80913-4093
US
M/F: (TCN) W80BTZ62400118
RDD: E
PROJ: TP 2
SUPP ADD: W9046W SIG: C
FOR GOVERNMENT USE ONLY: (IPD) 05
DIC: A0A DIST: V ADV: FC: Z9
Need Ship Date:00/00/0000 Original Required Delivery Date:09/02/2026
SPE7L1-26-T-16A5 NSN/Part Number: 5340-01-629-6102 Quantity: 1 EA Purchase Request: 7018186487QTY: 1 Delivery: 10 days ADO