Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, July 22 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

DOOR, ACCESS, WEAPON

Active
SPE4A7-26-T-564JFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract pertains to the procurement of one unit of a Door, Access, Weapon system with NSN 5342-01-106-8147, under solicitation SPE4A7-26-T-564J, with a required delivery within 20 days of award. Manufacturing may involve casting or forging processes requiring specialized tooling not held by the government, and potential vendors are directed to submit a Casting and Forging Assistance Request through designated DLA channels for support. The technical and quality requirements governing this procurement are drawn from the DLA Master List of Technical and Quality Requirements, and the applicable revision is determined based on the type of acquisition and the relevant solicitation or amendment date. This item is subject to strict export controls under ITAR or EAR, prohibiting unauthorized disclosure or transfer of associated technical data to foreign persons, even within the United States, and compliance with DFARS 252.225-7048 is mandatory. Only contractors with an approved US/Canada Joint Certification Program certification, completed DOD export control training, and DLA-approved access rights may handle the controlled technical data. The place of performance is Fort Irwin, California, with Jamiah Sutton as the primary point of contact, and responses must be submitted by July 22, 2026.

General Info

Single military door access weapon procured by DLA via DIBBS, due July 17, 2026, open to federal contractors.

Agency

Department Of Defense → ASC SUPPLIER OPER AE AND AF DIVView Agency

NAICS

332321 - Metal Window and Door ManufacturingView NAICS

Place of Performance

LDEPOT ST REC WHSE BLDG 860, FORT IRWIN, CA, 92310-9986, US

Set-Aside

NONE

Documents

(1)

SPE4A7-26-T-564J.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

1 update
PhaseSolicitation
Posted

Solicitation

Amendment 1

Contract was updated

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → ASC SUPPLIER OPER AE AND AF DIV
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → ASC SUPPLIER OPER AE AND AF DIV
View Agency Profile
Office AddressUS
Contacts
Jamiah Sutton
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
DOOR,ACCESS,WEAPON
DOOR, ACCESS, WEAPON SYSTEM
RD005: Cybersecurity Maturity Model Certification (CMMC) Level 2 Certified Third-Party Assessment Organization (C3PAO) RQ017: PHYSICAL INDENTIFICATION/BARE ITEM MARKING
Casting/forging may be required to manufacture this NSN and tooling is typically involved. The government may not have this special tooling. For sourcing, tooling, materials or other information, please submit a Casting and Forging Assistance Request at either https://www.dla.mil/Aviation/Offers/Engineering/Forging-and-Casting/ or Land & Maritime Supply Chains DSCC.cast.forge@dla.mil. RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS (IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ032: EXPORT CONTROL OF TECHNICAL DATA
This item has technical data some or all of which is subject to export-control of either the International Traffic in Arms regulations (ITAR) or the Export Administration Regulations (EAR), and cannot be exported without prior authorization from either the Department of State or the Department of Commerce. Export includes disclosure of technical data to foreign persons and nationals whether located in the United States or abroad. This requirement applies equally to foreign national employees and U.S. companies and their foreign subsidiaries. DFARS 252.225-7048 is applicable to this data.
The Defense Logistics Agency (DLA) limits distribution of export-control technical data to DLA contractors that have an approved US/Canada Joint Certification Program (JCP) certification, have completed the Introduction to Proper Handling of DOD Export-Controlled Technical Data Training and the DLA Export-Controlled Technical Data Questionnaire (both are available at the web address given below), and have been approved by the DLA controlling authority to access the export-controlled data. NSN/Part Number: 5342-01-106-8147 Quantity: 1 EA Purchase Request: 7017397879QTY: 1 Delivery: 20 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 332321
New
DIBBS
Precision Machining of Aerospace Structural PlateThe contract awards the manufacture and precision CNC machining of an aluminum structural plate intended for use in military or aerospace applications, requiring strict adherence to established defense and aerospace specifications. The work encompasses full-scale production from raw material through final machining, including all necessary finishing processes and comprehensive quality inspection to ensure dimensional accuracy, material integrity, and compliance with performance standards. The item is subject to rigorous controls typical of defense-contracted components, and the successful bidder must demonstrate capability to meet stringent military-grade requirements without deviation. The contract is classified as a subcontract under the NAICS code 332321 for CNC machine shop services, issued by the Defense Logistics Agency within the Department of Defense. Although specific location details are not provided, performance is expected to occur at the contractor’s facility with full accountability for delivery, inspection, and certification. The solicitation was posted on July 17, 2026, and the contract reference number is SPE4A726V1061, indicating it is part of a broader defense supply chain initiative focused on critical structural components for defense systems.
Defense Logistics Agency

POSTED

about 16 hours ago

DEADLINE

N/A
View Details
NAICS: 332321
New
DIBBS
Small Business Subcontracting Participation (Tier 2+ Suppliers)This contract involves the supply of components, materials, or services to assist the prime contractor in meeting its Small Business Subcontracting goals as required under DFARS regulations. The effort is classified as a Tier 2+ subcontract, indicating it supports deeper layers of the supply chain beyond direct prime contractor engagement. The NAICS code 332321 specifies the industrial category as Industrial Boiler and Tank Manufacturing, aligning the scope of work with the production of specialized equipment critical to defense logistics. The contract is administered by the Defense Logistics Agency under the Department of Defense and is tied to a specific prime contract identified in the DIBBS system, ensuring traceability and compliance with federal subcontracting obligations. Performance locations and exact deliverables are not detailed in the metadata, but the intent is clearly to enable the prime contractor to fulfill its mandated small business participation targets through targeted procurement from qualified suppliers.
Defense Logistics Agency

POSTED

about 16 hours ago

DEADLINE

N/A
View Details
NAICS: 332321
New
DIBBS
Access Door Hinge ManufacturingThe contract encompasses the manufacture and delivery of 103,029.52 precision access door hinges designated by NSN 5340006295543, intended for integration into critical defense systems. Production must adhere strictly to federal supply standards and technical specifications to ensure operational reliability and compatibility within military platforms. The work is being executed under a subcontract arrangement, with the Defense Logistics Agency representing the Department of Defense as the contracting authority. The North American Industry Classification System code 332321 confirms the nature of the manufacturing activity as part of the small arms, ordnance, and ordnance accessories sector. Delivery is scheduled under the referenced subcontract award, with performance expected to meet all quality, compliance, and timeline requirements mandated by defense procurement protocols.
Defense Logistics Agency

POSTED

about 16 hours ago

DEADLINE

N/A
View Details
NAICS: 332321
New
DIBBS
Precision Sheet Metal Fabrication for Duct ComponentsThis contract encompasses the precision fabrication of metal components for a flexible inlet duct assembly, involving CNC cutting, bending, and welding operations that demand stringent adherence to industrial quality and dimensional tolerances. The work must meet exacting specifications to ensure structural integrity and performance in demanding environments, reflecting the high-stakes nature of defense-related applications. All processes are governed by established manufacturing standards to guarantee consistency, reliability, and compatibility with broader assembly systems. Issued as a subcontract under the Department of Defense's Defense Logistics Agency, this procurement is classified under NAICS code 332321 for Sheet Metal Work, targeting specialized fabricators capable of delivering precision-engineered components. The contract was posted on July 17, 2026, with performance obligations likely tied to national defense infrastructure needs, though the specific location of performance remains unspecified. The work is critical to supporting advanced aerospace or military systems, requiring certified capabilities in metallurgy, CNC operation, and quality control without reliance on set-asides or small business preferences.
Defense Logistics Agency

POSTED

about 16 hours ago

DEADLINE

N/A
View Details
NAICS: 332321
New
Federal
MARINE DOORThe United States Coast Guard Surface Forces Logistics Center is soliciting quotations for six marine doors, NSN 2040-01-F14-3674, manufactured by Bollinger Shipyards, Inc., with OEM part number 121S61 R-H. Each door is a 54-inch by 26-inch right-hand hinge aluminum unit with a clear opening, two hinges, and a 10-inch portlight, built per BSI Drawing 121S61 Sheet 3 for use as an entrance to ships’ offices from the main deck. Due to prior quality issues, 100 percent dimensional inspection and a chalk test along the full perimeter of the rubber gasket are mandatory for quality assurance. All items must be individually packaged per MIL-STD-2073-1E Method 10 and shipped in ASTM-D6251 Type III Class 1 wood-cleated panelboard or ASTM-D6880 Class 2 heavy-duty screwed wooden boxes, with markings compliant to MIL-STD-129R using Code 39 barcoding per ISO/IEC-16388-2007. Standard commercial packaging is unacceptable, and failure to comply will result in rejection and return. Only the specified brand name part is acceptable; alternative products must meet all salient characteristics and require formal USCG approval. Delivery must be F.O.B. Destination to the designated Baltimore warehouse location. The solicitation is a combined synopsis and solicitation under FAR Subpart 12.6, using simplified acquisition procedures, with award based on lowest price technically acceptable, firm fixed price terms. All offerors must have active SAM registration, a valid DUNS number, and provide their Tax Identification Number. Proposals are due by July 23, 2026, at 10:00 a.m. Eastern Time, and must include the required disclosures regarding corporate inversion status and compliance with applicable FAR and HSAR clauses, including Buy American Act, anti-trafficking, child labor, and subcontracting restrictions, along with a completed FAR 52.212-3 form.
Sflc Procurement Branch 1(00080)

POSTED

about 21 hours ago

DEADLINE

in 5 days
View Details
NAICS: 332321
New
DIBBS
Precision Metal Fabrication of Mounting BracketThe contract calls for the precision metal fabrication of a mounting bracket in accordance with detailed technical drawings and military specifications, encompassing all stages of production including cutting, bending, welding, and finishing to ensure compliance with required standards. The work must adhere to strict quality controls to meet the performance and durability demands of defense applications, with the final product expected to be delivered to the specified place of performance in New Cumberland, Pennsylvania, under the oversight of the Department of Defense via the Land Supply Chain organization. This is a subcontract opportunity with a NAICS code of 332321, indicating classification under the fabricated metal product manufacturing sector, and the solicitation is open for responses through July 27, 2026. The posting date indicates the opportunity was made available on July 16, 2026, giving interested parties approximately eleven days to prepare and submit proposals. While no set-aside designation or point of contact details are provided, interested contractors must be prepared to demonstrate capability in meeting military-grade fabrication requirements and compliance with all associated technical and logistical obligations.
LAND SUPPLY CHAIN

POSTED

1 day ago

DEADLINE

in 9 days
View Details
NAICS: 332321
New
DIBBS
Supply of Machine Screws (NSN 5305017022284)The contract pertains to the procurement and delivery of two units of machine screws identified by the National Stock Number 5305017022284, meeting all Department of Defense specifications. The items must be packaged in accordance with MIL-STD standards and include proper hazardous material labeling to ensure compliance with safety and regulatory requirements. Shipping must be traceable to maintain full accountability throughout the logistics chain. The solicitation is issued as a subcontract under NAICS code 332321 by the Aviation Supply Chain ESOC Buys division of the Department of Defense. The place of performance is designated as Fort Stewart, Georgia, with a zip code of 31314-0000. The posting date is July 16, 2026, and responses are due by July 24, 2026. All deliverables are expected to adhere strictly to military-grade standards without exception.
AVIATION SUPPLY CHAIN ESOC BUYS

POSTED

1 day ago

DEADLINE

in 6 days
View Details
NAICS: 332321
New
DIBBS
Manufacturing of Rigid Connecting Link (NSN 3040010520938)
LAND SUPPLIER OPNS VEHICLE SPT

POSTED

1 day ago

DEADLINE

in 9 days
View Details
NAICS: 332321
New
DIBBS
Manufacture of Flexible Metal Conduit AssembliesThe contract requires the fabrication and assembly of six flexible metal conduit assemblies conforming to military specifications, encompassing all stages of production from material preparation to final assembly. Each unit must meet strict dimensional, material, and performance standards dictated by military requirements, with particular attention to durability, electrical integrity, and environmental resilience. The work includes proper packaging to prevent damage during transit, accurate labeling as per military guidelines, and full compliance with shipment protocols to ensure timely and secure delivery. Delivery is to be made to Robins Air Force Base, Georgia, with a response deadline of July 24, 2026, and the solicitation was posted on July 16, 2026. This is a subcontract opportunity under the NAICS code 332321, which classifies the work under Other Fabricated Metal Product Manufacturing. The contracting activity falls under the Department of Defense, specifically the ASC SUPPLIER OPER AE AND AF DIV, and bidders must ensure full alignment with all federal procurement procedures, including documentation, certification, and compliance with defense supply chain requirements. No set-aside status is specified, meaning all eligible contractors may respond.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

1 day ago

DEADLINE

in 6 days
View Details
NAICS: 332321
New
DIBBS
Precision Fastener Supply – Socket Head Cap ScrewsThe contract solicits the supply of 424 units of socket head cap screws designated by NSN 5305011940595, with full compliance required for packaging, labeling, and quality certification under military standards. The items must meet stringent specifications to ensure interoperability and reliability in defense applications, and the vendor is expected to deliver all units in accordance with the technical and procedural requirements mandated by the Department of Defense. Performance of the contract is specified to occur in New Cumberland, Pennsylvania, with the delivery schedule tied to the response deadline of July 24, 2026. The opportunity is classified as a subcontract under NAICS code 332321, indicating it involves the manufacturing of industrial fasteners, and is managed by the ASC Commodities Division under the broader oversight of the Department of Defense. All proposals must be submitted through the official DIBBS platform prior to the deadline to be considered for award.
ASC COMMODITIES DIVISION

POSTED

1 day ago

DEADLINE

in 6 days
View Details
NAICS: 332321
New
DIBBS
Precision Hardware Supply – Close Tolerance ScrewsFour precision close tolerance screws, identified by NSN 5305017276975, are to be supplied in strict compliance with military specifications, ensuring exacting dimensional and performance standards. The contract mandates adherence to all applicable packaging, marking, and hazard communication requirements to ensure safe handling, traceability, and regulatory alignment throughout the supply chain. Delivery is expected to the place of performance in Lemoore, California, with a zip code of 93246-5008, under a subcontract arrangement issued by the Department of Defense through NAS Norfolk Detachment. The solicitation was posted on July 16, 2026, and responses must be submitted by July 24, 2026, with the NAICS code 332321 indicating the manufacturing classification for screw and bolt manufacturing. All materials must meet federal and defense-specific compliance benchmarks to be eligible for acceptance.
NAS NORFOLK DETACHMENT

POSTED

1 day ago

DEADLINE

in 6 days
View Details
NAICS: 332321
New
DIBBS
Precision Metal Fabrication of Hinge, Strap (NSN 5340-01-251-3982)
LAND SUPPLY CHAIN

POSTED

1 day ago

DEADLINE

in 9 days
View Details

More opportunities from Department Of Defense → ASC SUPPLIER OPER AE AND AF DIV

Same awarding agency

NAICS: 541330
New
DIBBS
Quality Assurance & Inspection ServicesThe contract requires independent origin inspection and acceptance of manufactured parts to ensure full compliance with engineering drawings, technical specifications, and zero non-conformance standards. Inspectors must verify that all components meet exact quality criteria before acceptance, with no tolerance for defects or deviations. This effort is critical to maintaining the integrity of defense-related supply chains and ensuring that all delivered parts are fit for mission-critical applications. The contract is categorized as a subcontract under NAICS code 541330, associated with the Department of Defense’s ASC SUPPLIER OPER AE AND AF DIV. It was posted on July 17, 2026, with responses due by July 29, 2026. The place of performance and specific office location are not detailed, but the work is tied to defense procurement processes managed through the DIBBS system. All parties must adhere to rigorous quality controls and documentation practices to fulfill the zero non-conformance mandate.
Engineering Services

POSTED

about 16 hours ago

DEADLINE

in 11 days
View Details
NAICS: 493190
New
DIBBS
Government Surplus Property Handling & Repackaging ServicesThe contract seeks services to inspect, validate, repack, and document surplus government property for reuse or resale, ensuring strict adherence to federal labeling standards and chain-of-custody requirements. All activities must maintain regulatory compliance throughout the handling process, with a focus on preserving the integrity and traceability of items from intake to final disposition. This includes accurate documentation and proper packaging to meet federal guidelines, enabling seamless transition of materials into secondary markets or internal reuse programs. The solicitation falls under NAICS code 493190 and is classified as a subcontract, issued by the Department of Defense through the ASC SUPPLIER OPER AE AND AF DIV. The opportunity was posted on July 17, 2026, with responses due by July 29, 2026. While specific location details for performance or contact points are not provided, bidders must be prepared to support operations in alignment with DOD protocols and ensure full transparency in all handling procedures. The work is critical to maximizing the value of surplus assets while maintaining accountability across the federal supply chain.
Other Warehousing and Storage

POSTED

about 16 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332613
New
DIBBS
Precision Machining of Fuel Line ComponentsThe contract involves the precision machining of a slider block intended for use in a fuel line assembly, requiring strict adherence to military specifications, approved technical data packages, and established quality standards. The component must be manufactured to exacting tolerances to ensure reliability and performance in demanding operational environments, with all processes and materials subject to rigorous inspection and documentation protocols. This subcontract falls under NAICS code 332613, indicating it is for other machine shop services, and is being managed by the Department of Defense through the ASC SUPPLIER OPER AE AND AF DIV. The solicitation was posted on July 17, 2026, with responses due by July 29, 2026, and is accessible through the DIBBS platform. There is no set-aside designation specified, meaning the contract is open to all qualified suppliers regardless of business size or status. The place of performance and point of contact details are not provided, suggesting the contractor will coordinate directly with the procuring activity to finalize logistics and deliverables. Full compliance with technical requirements and quality assurance measures is mandatory, and failure to meet these standards may result in rejection or contract termination.
Spring Manufacturing

POSTED

about 16 hours ago

DEADLINE

in 11 days
View Details
NAICS: 541380
New
DIBBS
First Article Testing (FAT) ServicesThe contract seeks specialized First Article Testing services for a military duct assembly, requiring full compliance with Department of Defense standards, including the proper execution of tests and submission of documentation such as DD Form 250. The work must be performed by a qualified small business as this is a Total Small Business Set-Aside under FAR 19.5, classified under NAICS code 541380 for other scientific and technical consulting services. All testing activities must align with military specifications and deliverables to ensure the duct assembly meets required performance, safety, and quality benchmarks before production. The solicitation, issued by the Department of Defense through the ASC SUPPLIER OPER AE AND AF DIV, has a response deadline of July 29, 2026, and is accessible via the DIBBS platform. The place of performance and physical address details are unspecified, indicating flexibility in location, but the work must be completed in accordance with federal contract requirements. The contract structure is a subcontract, meaning the selected vendor will likely work under a prime contractor to supply certified test results and documentation critical to the military supply chain.
Testing Laboratories and Services

POSTED

about 16 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332999
New
DIBBS
Supply of Military Duct AssemblyThe contract requires the manufacture, testing, packaging, and delivery of 39 military-grade duct assemblies identified by NSN 1660-00-799-5861, all of which must adhere strictly to applicable military specifications. Each unit must undergo First Article Testing to verify compliance with design and performance requirements, and must be uniquely identified with IUID marking to ensure traceability across the Defense Logistics Agency’s inventory system. The work is solicited as a subcontract under a Total Small Business Set-Aside, meaning only small business concerns certified by the SBA are eligible to respond, and the NAICS code 332999 indicates the performance falls under Other Miscellaneous Fabricated Metal Product Manufacturing. The solicitation was posted on July 17, 2026, with a response deadline of July 29, 2026, and the contracting office is the ASC Supplier Oper AE and AF Division within the Department of Defense. All delivered items must be ready for immediate integration into military systems, with no deviation from the stated technical and administrative requirements.
All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 16 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332721
New
DIBBS
Precision Manufacturing of Threaded Tapered Pins (Critical Application Item)The contract requires the manufacture and supply of precision-machined tapered threaded pins designated as P/N AN386-3-16A and NSN 5315-00-265-9892, classified as a Critical Application Item due to their essential role in military systems. All components must strictly comply with applicable military specifications, ensuring dimensional accuracy, material integrity, and performance under demanding operational conditions. Rigorous quality control protocols are mandated, including full traceability of raw materials through every production stage, with documentation verifying origin, processing, and inspection results. Each unit must undergo inspection and certification to confirm adherence to technical requirements and avoid any risk of nonconformance. The solicitation, issued under the Department of Defense through the ASC SUPPLIER OPER AE AND AF DIV, is structured as a subcontract and falls under NAICS code 332721 for machine shops. The response deadline is set for July 21, 2026, with the posting date on July 17, 2026. Place of performance details are unspecified, but the requirement for traceability and origin inspection implies that manufacturing and inspection activities must occur within approved facilities capable of meeting defense standards. The lack of a set-aside designation suggests this opportunity is open to all qualified suppliers, with the emphasis squarely on technical compliance, documentation rigor, and proven capability in producing mission-critical aerospace and defense hardware.
Precision Turned Product Manufacturing

POSTED

about 16 hours ago

DEADLINE

in 3 days
View Details
NAICS: 332813
New
DIBBS
Specialized Material Supply and ProcessingThe contract calls for the supply of alloy steel and corrosion-resistant materials alongside specialized processing services including heat treatment, plating, anodizing, and welding, all requiring full documentation, certification, and traceability to ensure compliance with stringent quality standards. The materials and services are intended to meet precise technical specifications critical for defense and aerospace applications, with all work subject to rigorous inspection and adherence to industry-approved protocols. Issued under the NAICS code 332813 for forge shops and foundries, this subcontract is managed by the Department of Defense through the ASC SUPPLIER OPER AE AND AF DIV, with responses due by July 24, 2026. The work is expected to be performed without geographic restriction specified, and all deliverables must be accompanied by comprehensive records verifying material origins, processing steps, and final inspections to ensure full accountability and readiness for military use.
Electroplating, Plating, Polishing, Anodizing, and Coloring

POSTED

about 16 hours ago

DEADLINE

in 6 days
View Details
NAICS: 541380
New
DIBBS
First Article Testing and Certification ServicesThe contract solicits independent testing and certification services for the first article unit, requiring comprehensive dimensional inspection, material verification, and nondestructive testing in compliance with ASTM-E1417 standards. The work must be performed to.validate conformance to technical specifications prior to formal acceptance, with all findings and documentation submitted to Hill Air Force Base. This subcontract is categorized under NAICS code 541380, indicating it falls within the scientific and technical consulting services sector, and is issued by the Department of Defense through the ASC SUPPLIER OPER AE AND AF DIV. The solicitation was posted on July 17, 2026, with a response deadline of July 24, 2026, requiring proposers to submit their offerings within this seven-day window. Performance is expected to be conducted in accordance with federal contracting requirements, though the specific place of performance and point of contact details are not provided.
Testing Laboratories and Services

POSTED

about 16 hours ago

DEADLINE

in 6 days
View Details
NAICS: 332721
New
DIBBS
Precision Manufacturing of Quick Release Pin ReceptacleThe contract calls for the precision machining and production of a quick release pin receptacle designated by NSN 5342-01-049-0333, manufactured to strict military specifications with full compliance to all applicable effectivity bullets and MIL-STD-130 marking requirements. The component must meet all first article inspection criteria to ensure dimensional accuracy, material integrity, and functional performance in demanding operational environments. Production must be executed under a subcontracting arrangement, with adherence to defense procurement protocols governing quality assurance, traceability, and documentation. The solicitation was posted on July 17, 2026, with a response deadline of July 24, 2026, and falls under NAICS code 332721 for metal forging and stamping. The contracting organization is the ASC SUPPLIER OPER AE AND AF DIV within the Department of Defense, indicating direct relevance to military supply chain operations. Although no specific place of performance or point of contact is detailed, the requirement implies that all work must be performed by qualified suppliers capable of meeting defense-grade manufacturing standards and delivering fully compliant hardware on schedule.
Precision Turned Product Manufacturing

POSTED

about 16 hours ago

DEADLINE

in 6 days
View Details
NAICS: 332999
New
DIBBS
Supply of Blind Rivets (NSN 5320-00-883-9393)The contract entails the manufacture and delivery of exactly 70 units of a specific blind rivet identified by NSN 5320-00-883-9393, under a firm fixed-price arrangement, ensuring cost certainty for both parties. All items must comply with mandatory military packaging and labeling specifications to meet Department of Defense standards for readiness and logistics. The work is procured as a subcontract under NAICS code 332999, indicating it falls under other miscellaneous fabricated metal product manufacturing, and is managed by the ASC SUPPLIER OPER AE AND AF DIV under the broader Department of Defense. The solicitation was posted on July 17, 2026, with responses required by July 21, 2026, establishing a tight, four-day window for submission. The place of performance and point of contact details are not specified, but the official solicitation is accessible via the DIBBS platform for further procurement details.
All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 16 hours ago

DEADLINE

in 3 days
View Details
NAICS: 484220
New
DIBBS
Domestic and International Freight LogisticsThe contract involves the transportation of manufactured units from their origin to designated government destinations, encompassing both domestic trucking and potential international ocean freight services. All logistics operations must strictly comply with U.S. cargo preference laws, ensuring compliance with federal requirements for the use of U.S.-flagged vessels and domestic carriers where applicable. The work is classified as a subcontract under NAICS code 484220, which pertains to truck transportation for moving goods, and is issued by the Department of Defense through the ASC SUPPLIER OPER AE AND AF DIV. Responses are due by July 19, 2026, with the solicitation posted on July 17, 2026, and all performance activities are tied to government-controlled endpoints without specified geographic limitations.
Specialized Freight (except Used Goods) Trucking, Local

POSTED

about 16 hours ago

DEADLINE

in 1 day
View Details
NAICS: 326199
New
DIBBS
Specialized Packaging and PreservationThis contract mandates the application of military-compliant preservation and packaging standards in strict accordance with MIL-STD-2073-1E and MIL-STD-129R, ensuring that all items are protected for long-term storage and transportation under demanding conditions. The required procedures include vacuum sealing to eliminate moisture and contaminants, the inclusion of appropriate desiccants to maintain low humidity levels within packaging, and the placement of Type I (Code U) shelf-life labels that clearly indicate the expiration and storage requirements for the preserved items. These measures are essential to maintain the operational readiness and integrity of defense-grade equipment and components throughout their designated service life. The contract is structured as a subcontract under the NAICS code 326199, which corresponds to other plastic product manufacturing, and is managed by the ASC SUPPLIER OPER AE AND AF DIV under the Department of Defense. The solicitation was posted on July 17, 2026, with a firm response deadline of July 19, 2026, indicating a tight turnaround for qualified vendors to submit proposals. The place of performance and point of contact details are unspecified, leaving full responsibility for logistics and coordination to the subcontractor. Compliance with all technical specifications and labeling requirements is mandatory, and failure to meet these standards may result in rejection of delivered goods or contract termination.
All Other Plastics Product Manufacturing

POSTED

about 16 hours ago

DEADLINE

in 1 day
View Details