Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

DOT-Compliant Lighting and Safety Systems

Active

Federal

Response Deadline08/07/2026, 09:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract seeks the supply of DOT-approved lighting, reflectors, and warning systems specifically designed for the safe road transport of a grain drill, ensuring compliance with federal transportation safety standards. The requirement is issued as a subcontract under a Small Business Set Aside designation, reserved exclusively for small businesses, with the NAICS code 335129 indicating it falls under Miscellaneous Electrical Equipment and Component Manufacturing. The solicitation was posted on August 3, 2026, and responses are due by August 7, 2026, at 9:00 PM Eastern Time. Performance of the contract is required to be carried out in Adams, Oregon, with a zip code of 97810. The contracting entity is the USDA ARS AFM APD under the Department of Agriculture, though no specific point of contact or additional office details are provided. All equipment must meet current DOT regulatory requirements for visibility, safety, and durability during transit.

General Info

Supply DOT-compliant lighting and safety systems for grain drill transport in Adams, Oregon, by small business, due August 7, 2026.

Agency

Department Of Agriculture → USDA Ars Afm ApdView Agency

NAICS

335129 - Other Lighting Equipment ManufacturingView NAICS

Place of Performance

Adams, OR, 97810, USA

Set-Aside

SBA

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedAug 3

subcontract

Response DeadlineAug 7

Submission deadline

Response Deadline

08/07/2026, 09:00:00 PM UTCin 3 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Agriculture → USDA Ars Afm Apd

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Agriculture → USDA Ars Afm Apd

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Supply of DOT-approved lighting, reflectors, and warning systems for safe road transport of the grain drill.

Similar Contracts

Same NAICS industry code

Supply and Installation of Retroreflective Pavement Markers

STATE OF CALIFORNIA DEPARTMENT OF TRANSPORTATION

POSTED

DEADLINE

Emergency Lighting Strip SupplyThe contract is for the supply of ten emergency lighting strips with part number S1S1S1, designed for low-voltage, long-duration operation to ensure cabin safety in marine or aerospace environments. These lighting units are critical for maintaining visibility and safety during power outages or emergency scenarios, meeting stringent operational requirements for durability and reliability under extreme conditions. The contract is classified as a subcontract under NAICS code 335129, indicating it falls within the broader category of electrical lighting equipment manufacturing. It was posted on July 31, 2026, with a response deadline of August 12, 2026, at 5:00 PM, giving potential suppliers a limited window to submit proposals. The agency responsible is the Navsup Fleet Logistics Center Puget Sound, operating under the Department of Defense, which underscores the sensitive and mission-critical nature of the equipment. Although specific location details for performance or delivery are not provided, the intent is for the lighting strips to support operations in demanding environments where standard lighting systems would be insufficient. All submissions must comply with technical and performance specifications tied to the part number and intended use without room for substitution or deviation.

Navsup Flt Logistics Ctr Puget Sound

POSTED

DEADLINE

Integrated Tool Lighting SystemThe contract seeks the supply and integration of a ruggedized low-light lighting system designed specifically for use with breaching tools in dark or low-visibility environments. The system must be durable enough to withstand harsh tactical conditions while providing reliable illumination that enhances operator safety and effectiveness during critical operations. It is intended for deployment in conjunction with existing breaching equipment, requiring seamless integration to ensure functionality without compromising tool performance or ergonomics. This subcontract is being issued by the Florida Police Department with a response deadline of August 11, 2026. The NAICS code 335129 indicates the focus on other electrical equipment and component manufacturing, suggesting the solution must be engineered and produced to industry-specific standards. The place of performance and point of contact details are not provided, and no set-aside type is specified, meaning eligible vendors of all sizes may respond. The project is posted on the Cape Coral, Florida public procurement portal, and all submissions must meet technical and procedural requirements outlined in the solicitation by the stated deadline.

Police Department

POSTED

DEADLINE

LED 4FT Tubular Bulb Supply (SYLVANIA or Equivalent)Nashville Electric Service is seeking suppliers to provide 1,225 units of LED 4FT tubular bulbs that meet or exceed the specifications of the SYLVANIA LED12T8L48FGPDIM8SC12BF model or an approved equivalent. The contract is structured as a subcontract with no installation, maintenance, or additional services required—the sole obligation is the delivery of compliant lighting units. The solicitation was posted on July 30, 2026, and responses must be submitted by 7:00 PM ET on August 5, 2026. The North American Industry Classification System code for this procurement is 335129, which pertains to other lighting equipment manufacturing. The place of performance is Nashville, Tennessee, and all bids must be submitted through the vendor portal at the provided link. The contract does not specify a set-aside classification, and no point of contact information is listed.

Nashville Electric Service

POSTED

DEADLINE

in about 13 hours

Medical Lighting Equipment Supply – Examination LightsThe contract requires the supply of three ceiling-mounted examination lights model FMI-301CLED, specifically designed for use on U.S. Navy vessels and must meet stringent FDA regulatory requirements as well as military packaging standards to ensure durability and compliance in operational environments. The equipment is intended for medical use aboard naval ships, necessitating precise engineering and adherence to federal specifications for light output, safety, and installation compatibility. Delivery must be coordinated to the designated military postal address FPO with ZIP code 09554, reflecting the remote and maritime nature of the end use location. The solicitation was posted on July 29, 2026, with a response deadline of August 5, 2026, indicating a tight turnaround for qualified suppliers to submit proposals. The contract is classified as a subcontract under NAICS code 335129, which pertains to other lighting equipment manufacturing, and is administered by the Department of Defense through the Medical Supply Chain FSH office. Although no specific point of contact or set-aside provisions are detailed, the requirement underscores a critical need for reliable, compliant medical lighting in military healthcare settings, where malfunction or non-compliance could impact patient care during missions.

MEDICAL SUPPLY CHAIIN FSH

POSTED

DEADLINE

in about 11 hours

Medical Lighting Equipment Supply – Surgical LightsThe contract calls for the supply of thirteen ceiling-mounted surgical lights, specifically the FMI-301CLED model, to be delivered to U.S. Navy vessels. All units must meet full compliance with both FDA regulations and applicable military standards, ensuring functionality, safety, and reliability in high-stakes medical environments aboard naval ships. The equipment is required to support surgical operations under the demanding conditions typical of military medical facilities, with performance and durability being critical factors. The solicitation was posted on July 29, 2026, with a response deadline of August 5, 2026, and is classified as a subcontract under NAICS code 335129, which pertains to other lighting equipment manufacturing. The performing location is designated as FPO, ZIP 09554, indicating delivery to a military postal address, typically used for overseas or ship-based operations. The contracting agency is the Medical Supply Chain FSH under the Department of Defense, and the procurement is managed through the DIBBS platform, with the official reference link provided for bidder access.

MEDICAL SUPPLY CHAIIN FSH

POSTED

DEADLINE

in about 11 hours

Supply of Portable Fluorescent LampsThe contract entails the supply of portable fluorescent lamps that contain mercury, with strict adherence to federal environmental regulations and military packaging standards to ensure safe handling, transport, and disposal. These lamps are required to meet specific technical and compliance criteria established by the Department of Defense to safeguard both personnel and the environment throughout their lifecycle. The performance location is designated as Groton, Connecticut, with a zip code of 06340-4905, indicating the primary operational area where the lamps will be delivered and utilized. This subcontract, issued under the NAICS code 335129 for other lighting equipment manufacturing, is managed by the Defense Logistics Agency and is open for response until August 10, 2026. The posting date of July 28, 2026, provides suppliers with a limited window to prepare and submit proposals that align with the stringent environmental and military packaging requirements. While no set-aside information is specified, the contract is part of a broader Defense Department initiative to procure mission-critical lighting equipment while maintaining regulatory compliance and logistical integrity.

Defense Logistics Agency

POSTED

DEADLINE

Energy-Efficient Electrical Products SupplyThe contract titled Energy-Efficient Electrical Products Supply is a subcontract awarded by the Government of Jamaica’s Post and Telecommunications Department to procure energy-saving electrical products including LED lighting, low-consumption appliances, and efficient motors. The procurement aligns with the department’s green procurement objectives aimed at reducing energy consumption and promoting sustainable practices. The contract falls under the NAICS code 335129, which categorizes it within the manufacture of other electrical equipment and components. It was posted on July 28, 2026, and is intended for delivery across locations under the jurisdiction of the agency, with no specific city or state defined for performance. The contract opportunity is accessible via the Government of Jamaica’s electronic procurement portal for bidders and subcontractors interested in supplying compliant energy-efficient technologies.

Post and Telecommunications Department

POSTED

DEADLINE

Electrical or Signaling Equipment SupplyThe contract seeks the supply of electrical components or traffic signaling equipment that must fully comply with Arizona Department of Transportation and Maricopa Association of Governments standards. This subcontract is open for bidding with a response deadline of August 13, 2026, and was posted on July 28, 2026. The NAICS code 335129 categorizes the procurement under other electrical equipment and component manufacturing, indicating the specialized nature of the required goods. The work is associated with the Public Works agency in Arizona, and the place of performance is within the state, though specific location details are not provided. The contract does not specify a set-aside type or point of contact, and interested parties can access further information through the provided online portal link.

POSTED

DEADLINE

LED Work Lights and Backup Alarm InstallationThe contract is for the supply and factory installation of OEM-compliant LED work lights and backup alarms on diesel utility vehicles intended for off-road operational use, ensuring compliance with original equipment manufacturer standards. The work must be performed at the factory level, integrating the lighting and alarm systems directly during vehicle production to meet rigorous performance and safety requirements for demanding field environments. The solicitation is designated as a Small Business Set Aside under the NAICS code 335129, exclusively available to small businesses, with responses due by August 12, 2026, and the contract issued through the Department of Veterans Affairs through Network Contract Office 19, with performance required in Cheyenne, Wyoming, under the 82001 zip code.

Network Contract Office 19 (36C259)

POSTED

DEADLINE

Exterior Lighting Fixture SupplyThe contract involves the supply of LED luminaires, poles, and mounting hardware compliant with specified technical requirements for a campus-wide exterior lighting upgrade. All delivered components must meet defined performance, durability, and energy efficiency standards to ensure uniformity and long-term reliability across the installation site. The work is classified as a subcontract under NAICS code 335129, which pertains to other照明设备制造, indicating the focus is on manufacturing and supply rather than installation. The solicitation was posted on July 28, 2026, with a hard deadline for responses set for August 5, 2026, at 5:30 PM. The place of performance is categorized as “Other,” suggesting the equipment will be distributed to multiple locations under the jurisdiction of the Kentucky Department for Facilities and Support, though no specific campus or address is listed. The contract does not indicate a set-aside status or point of contact information. Proposals must be submitted via the provided online portal.

Dept for Facilities and Suppor

POSTED

DEADLINE

in about 12 hours

Portable Electric Light Tower SupplyThe contract calls for the supply of five portable electric floodlight towers that must fully comply with military specifications and federal shipping standards, ensuring durability, performance, and transportability under demanding operational conditions. These units are intended for defense-related applications and must meet stringent requirements for reliability, power efficiency, and environmental resilience. The solicitation is issued under the NAICS code 335129, indicating classification within other electric lighting equipment manufacturing, and is structured as a subcontract within the broader framework of Department of Defense procurement efforts overseen by the Defense Logistics Agency. The opportunity is open for response until August 7, 2026, with the request for quote initially posted on July 27, 2026. There is no set-aside designation specified, meaning all eligible contractors may compete without restrictions based on business size or type. Performance of the contract will occur without a defined geographic location indicated, suggesting the deliverables may be distributed to various military sites as needed. Interested parties must access the official solicitation through the DIBBS portal using the provided link to obtain complete technical specifications, submission guidelines, and contractual terms.

Defense Logistics Agency

POSTED

DEADLINE

More opportunities from Department Of Agriculture → USDA Ars Afm Apd

Same awarding agency

Specialized Floor Maintenance Equipment & MaterialsThe contract seeks specialized equipment and materials for the annual deep cleaning and refinishing of vinyl composite tile (VCT) floors across multiple USDA-ARS facilities, with a focus on industrial floor buffers, strippers, waxes, and polishes. Performance is required at the Prosser location with a zip code of 99350, and the work involves maintaining high-traffic flooring systems to ensure cleanliness, durability, and safety in federal research buildings. This is a small business set-aside opportunity under NAICS code 423830, indicating eligibility is restricted to small business concerns as defined by the SBA. The solicitation was posted on August 4, 2026, with a firm response deadline of August 28, 2026, at 9:00 PM Eastern Time. Although the agency name listed is USDA ARS AFM APD, the parent organization is the U.S. Department of Agriculture, and the contract is structured as a subcontract under a broader federal procurement framework.

Industrial Machinery and Equipment Merchant Wholesalers

POSTED

about 18 hours ago

DEADLINE

Cleaning Supplies & Chemicals ProvisionThe contract requires the supply of all cleaning materials, chemicals, paper products, and trash bags necessary to support janitorial services under federal and USDA safety standards, with mandatory provision of Safety Data Sheets for all chemical products. All items must comply with applicable regulations to ensure workplace safety and environmental compliance. The procurement is structured as a subcontract set aside exclusively for small businesses under the SBA program, with the NAICS code 424210 indicating classification under Wholesale Trade of Chemical and Allied Products. The place of performance is designated as Prosser, Washington, with a zip code of 99350, and the solicitation is issued by the USDA Agricultural Research Service, Agricultural Facilities Management and Planning Division. Responses are due by August 28, 2026, at 9:00 PM Eastern Time, following the posting date of August 4, 2026.

Drugs and Druggists' Sundries Merchant Wholesalers

POSTED

about 18 hours ago

DEADLINE

Janitorial Labor ServicesThe contract entails the provision of comprehensive janitorial services for USDA-ARS facilities located in Prosser, WA, requiring daily tasks such as cleaning, disinfection, restocking of supplies, waste removal, sweeping, mopping, and vacuuming, in addition to periodic floor maintenance to ensure facilities meet strict hygiene and operational standards. All services must be performed consistently and reliably to support the integrity of federal research operations at the site. This is a Small Business Set Aside contract under NAICS code 561720, exclusively available to small businesses, with a response deadline of August 28, 2026. The contract is structured as a subcontract and will be administered by the U.S. Department of Agriculture’s Agricultural Research Service, specifically the Agency Facility Management and Administrative Programs Division. Performance is required solely at the Prosser, WA location with ZIP code 99350, and bidders must be prepared to meet all service expectations without interruption throughout the contract term.

Janitorial Services

POSTED

about 18 hours ago

DEADLINE

WWTP Improvements

Solicitation # 1232SA26Q1041

The U.S. Department of Agriculture’s Agricultural Research Service is soliciting quotes for wastewater treatment improvements at its facility in Beltsville, Maryland, under solicitation number 1232SA26Q1041. This is a combined synopsis and solicitation for commercial items issued under FAR Part 12, with no separate written solicitation to follow. The requirement is classified under NAICS code 238220 for Plumbing, Heating, and Air Conditioning Contractors, and is restricted exclusively to SBA-certified Women-Owned Small Businesses, with the small business size standard set at $19 million in annual revenue. All responsible sources meeting the certification criteria are invited to submit quotations, which will be evaluated by the agency. The deadline for submitting responses is August 14, 2026, at 11:30 AM Eastern Time, with the solicitation posted on July 16, 2026. Performance of the work is required at the USDA facility in Beltsville, Maryland, with a zip code of 20705. The primary point of contact for inquiries is David Reynolds, reachable via email at david.reynolds2@usda.gov. Interested parties may access additional details through the SAM.gov portal linked in the solicitation. This acquisition is structured to promote small business participation, specifically advancing opportunities for certified women-owned enterprises within the plumbing and HVAC contracting sector.

Plumbing, Heating, and Air-Conditioning Contractors

POSTED

about 18 hours ago

DEADLINE

Annual Janitorial Service Base +4 Option Years

Solicitation # 1232SA26Q1196

This contract solicits janitorial services for a base period with four optional extension years under solicitation number 1232SA26Q1196, issued as a combined synopsis and solicitation in accordance with FAR Part 12. The acquisition is a total small business set-aside exclusively for small business concerns, with the North American Industry Classification System code 561720 and a size standard of $22.0 million in annual receipts. All offerors must be currently registered in SAM.gov at the time of quotation submission and award, and payments will be processed through the Department of the Treasury’s Invoice Processing Platform. Quotations must be submitted electronically via email to lynn.hults@usda.gov no later than 4:00 PM Central Standard Time on Friday, August 28, 2026, with no faxed or paper submissions accepted. Proposals must include a detailed description of the vendor’s capability to deliver janitorial services over the full term including the four option years, along with relevant experience serving government agencies and a documented past performance history. Submissions that merely repeat the Statement of Work without providing substantive information about capabilities or experience will be disqualified. A site visit is scheduled for August 11, 2026, at 10:00 AM CST in Prosser, Washington, and interested parties must register attendees by emailing their names and company affiliation to the point of contact no later than 3:00 PM CST on August 10, 2026. Questions regarding the solicitation must be submitted by 3:00 PM CST on Friday, August 21, 2026. The place of performance is located in Prosser, Washington, while the contracting office is based in Beltsville, Maryland.

Janitorial Services

POSTED

about 18 hours ago

DEADLINE

Cattle Squeeze Chute

Solicitation # 1232SA26Q1096

This solicitation seeks a manual, stationary cattle squeeze chute system with integrated scale and adjustable alley, issued as a Request for Quotation under FAR Part 12 for commercial items. The system must feature a full parallel squeeze design capable of narrowing to 7.5–12 inches, with a minimum length of seven feet, and a head gate adjustable as narrow as four inches that operates quietly and smoothly from multiple locations. The chute must include a palpation cage for handler access at the rear, an emergency exit on both sides, neck access points, side doors for shoulder and hip access, and a latching system for feet and legs. A rump bar is required to prevent animals from backing up, and a weight platform kit must be included for safe and secure weight collection. The adjustable alley must be straight, up to nine feet in length, and include rolling doors, with four additional nine-foot alley sections required. The system must be manual with no hydraulic assist preferred, and no tub is required. All quotes must come from vendors actively registered in SAM.gov and submitted electronically by 4:00 PM Central Standard Time on August 7, 2026, to lynn.hults@usda.gov. Responses must include not only compliance with specifications but also detailed descriptions of capability, relevant experience delivering similar systems to government entities, and past performance history; submissions lacking this information will be disqualified. Delivery is due no later than September 30, 2026, FOB Destination to 3860 NE Antelope Trail, Pullman, WA 99164, with inspection and acceptance conducted by an authorized government representative upon verification of conformance with contract requirements. The procurement is unrestricted, not set aside for small business, and falls under NAICS code 333111 with a small business size standard of 1,250 employees. Payment will be processed via the Treasury’s Invoice Processing Platform, and invoices must be submitted to the designated remit-to address in College Station, TX. Training, on-site support, and parachute attachments for any associated drone systems are explicitly excluded from this requirement, with manufacturer documentation and remote technical support deemed sufficient.

Farm Machinery and Equipment Manufacturing

POSTED

about 18 hours ago

DEADLINE

Notice of Intent to Award on Sole Source Basis

Solicitation # 1232SA26Q01207

The United States Department of Agriculture, Agricultural Research Service, Pacific West Area, intends to award a sole-source purchase order to Agilent Technologies for an Agilent 8890 Gas Chromatograph System under FAR Part 12, which governs the acquisition of commercial products and services. The contract will be awarded on a Firm Fixed Price basis, with an estimated delivery timeline of ninety days after award, and is classified under NAICS Code 334516. This notice is purely informational and does not constitute a solicitation or a commitment from the government; no formal solicitation will be issued. Interested parties are invited to submit written substantiating documentation to the designated point of contact within five calendar days of the notice date, though all responses are considered solely at the government’s discretion to determine whether a competitive process should be pursued. Oral communications are not accepted, and no telephone inquiries will be honored. The award will be made in accordance with FAR 12.204, and performance is expected to occur in Oxford, Mississippi, with the contracting office located in Beltsville, Maryland.

Analytical Laboratory Instrument Manufacturing

POSTED

about 18 hours ago

DEADLINE

Semi-Annual Walk-in Cooler Service in Parlier, California

Solicitation # 1232SA26Q1145

This solicitation, numbered 1232SA26Q1145, is a combined synopsis and solicitation for commercial items issued under FAR Part 12 to procure semi-annual maintenance and repair services for 33 walk-in coolers located at the USDA-ARS San Joaquin Valley Agricultural Sciences Center in Parlier, California. The contract is a total small business set-aside under NAICS code 811310, with a size standard of $12.5 million, and is open to all responsible small business sources. The work involves comprehensive HVAC maintenance, including inspection and cleaning of evaporator and condenser coils, refrigerant pressure and performance testing, system calibration, electrical component checks, compressor and defrost mode verification, door hardware inspection, fan blade cleaning, motor lubrication, and thorough cleanup after service. All equipment, materials, and supplies must be furnished by the contractor. The period of performance is one year, running from September 1, 2026, to August 31, 2027, with two semi-annual service visits scheduled during that timeframe. The acquisition is structured as a Firm-Fixed Price Purchase Order under a Lowest Price Technically Acceptable (LPTA) evaluation method, where technical acceptability and past performance are pass/fail gates, and award will be made to the lowest priced offer that meets all technical and performance requirements. An official site visit is mandatory and scheduled for August 6, 2026, at 9:00 AM local time at 9611 S. Riverbend Ave., Parlier, CA 93648, and will be the only opportunity for offerors to inspect the location. Quotations must include a detailed operational approach addressing each SOW requirement, pricing submitted as specified, and a signed copy returned to the issuing office. Submissions are due by 5:00 PM Central Daylight Time on August 14, 2026, with all questions due no later than August 7, 2026, directed to Kerrie Hodges at kerrie.hodges@usda.gov, and must include the solicitation number in the subject line. Offerors must hold firm pricing for 90 days after the submission deadline. The contractor must comply with multiple Federal Acquisition Regulation clauses, including 52.212-4 (Terms and Conditions for Commercial Services), 52.20

Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and Maintenance

POSTED

about 18 hours ago

DEADLINE

Service of TSQ Quantis Mass Spectrometer

Solicitation # 1232SA26Q1172

The government is soliciting quotations for the service and maintenance of a TSQ Quantis Mass Spectrometer and associated Vanquish components, including the Split Sampler, Binary Pump, and Column Compartment, under solicitation number 1232SA26Q1172. This is a combined synopsis and solicitation issued in accordance with FAR Part 12, meaning no separate written solicitation will be provided and all responses must be submitted directly as quotations. The requirement is exclusively set aside for small business concerns as defined by the SBA, with a size standard of $34 million in annual revenue, and is classified as a Total Small Business Set-Aside, ensuring only eligible small businesses may compete. The assigned NAICS code is 811210 for Electronic and Precision Equipment Repair and Maintenance. Quotations are due by August 21, 2026, at 10:00 PM Eastern Time, and the contract is managed by the U.S. Department of Agriculture’s Agricultural Research Service in Beltsville, Maryland, with performance required in Tifton, Georgia. Primary point of contact for questions is Kerrie Hodges, reachable via email at kerrie.hodges@usda.gov. All responsible small businesses are encouraged to submit quotations, and the award will be made based on responsiveness, capability, and price fairness. The solicitation is publicly accessible via the SAM.gov portal, and no other sources will be considered for this acquisition.

Electronic and Precision Equipment Repair and Maintenance

POSTED

about 18 hours ago

DEADLINE

Diesel Fuel for Kohler Generators

Solicitation # 1232SA26Q0787

This solicitation seeks diesel fuel for Kohler generators located at two campuses, with five total generators comprising two 2000REOZMD models at the North Campus, each connected to a 4,900-gallon tank, and three Caterpillar generators at the South Campus sharing a single 10,000-gallon underground tank. Fuel usage is not standardized or tracked per generator but is instead determined by real-world demand during test runs and outages, with a single 9,000-gallon order made last year for the entire site. The requirement is issued as a combined synopsis and solicitation under FAR Part 12 with solicitation number 1232SA26Q0787 and is set aside exclusively for small businesses as defined by the 1,500-employee size standard under NAICS code 324110. All offerors must be actively registered in SAM.gov at the time of quotation and award, and payments will be processed through the Treasury’s IPP.gov platform. Responses must include not only compliance with specifications but also detailed information on capability, relevant government experience, and past performance; generic submissions without added context will be disqualified. Quotes are due by 4:00 p.m. Central Time on August 14, 2026, and must be submitted electronically to lynn.hults@usda.gov with no fax or paper copies accepted. The final date to submit questions is August 11, 2026, at 3:00 p.m. Central Time. The performance location is in Athens, Georgia, with the contracting office based in Beltsville, Maryland.

Petroleum Refineries

POSTED

about 18 hours ago

DEADLINE

Grounds Maintenance with 4 Option Years

Solicitation # 1232SA26Q0977

This solicitation calls for grounds maintenance services at the Knipling-Bushland U.S. Livestock Insects Research Laboratory in Kerrville, Texas, under a firm-fixed price requirements contract with a one-year base period and four one-year option periods, totaling up to five years of performance. The work includes mowing, edging, weed eating, debris blowing, shrub and hedge trimming four times annually, and two annual applications of a combination fertilizer/weed killer product suitable for Bermuda and St. Augustine grass, with all trash, debris, and clippings requiring removal and off-site disposal by the contractor. Mowing and trash pickup are scheduled for 37 events each annually, with clarification that the 38th pickup listed is an error and should be removed. Trimming is limited to the four scheduled visits; no additional trimming is expected beyond what is included in the firm-fixed price. Fertilizer is not required beyond the two pre-specified applications, and weed control outside those applications is handled by a separate contract. The total area to be maintained is approximately five acres, with services restricted to weekdays between 8 a.m. and 4:30 p.m., completed within a single day per service barring weather delays. The contractor must contact security at the gate each day to gain access and is not permitted to enter if work is not scheduled; no on-site storage is provided, though water is available. The facility has no additional security clearance requirements beyond scheduled access procedures. The contract is set-aside exclusively for small businesses as defined by the NAICS code 561730 with a $9.5 million size standard, and all offerors must be active in SAM.gov at the time of quotation and award. Proposals must include detailed evidence of technical capability, relevant government experience, and past performance—quotes that merely restate the statement of work will be deemed non-responsive. The evaluation method is lowest price technically acceptable, meaning only the lowest-priced technically acceptable offer with acceptable or neutral past performance will be considered for award. Offers must be submitted electronically by 4:00 p.m. CST on August 28, 2026, to lynn.hults@usda.gov, with no hard copies or faxes permitted. A mandatory site visit occurred on August 12, 2026, and questions were due by August 21, 2026. The contract includes specific clauses mandating compliance with anti-discrimination laws and the

Landscaping Services

POSTED

about 18 hours ago

DEADLINE

Residue-Cutting Coulter and Disc Opener FabricationThe contract pertains to the fabrication of heavy-duty coulters and double-disc seed openers specifically engineered for no-till farming conditions, where the equipment must effectively cut through dense crop residue to ensure reliable seed placement. The work is classified under NAICS code 332322, indicating it involves the manufacturing of agricultural implements, and is designated as a Small Business Set Aside with no limitations on the size of the qualifying small business, ensuring opportunity for eligible small manufacturers. The performance location is identified as Adams, Oregon, with a zip code of 97810, and all components must meet the technical demands of agri-equipment operating in challenging residue-laden fields. The solicitation was posted on August 3, 2026, with a strict deadline for responses set for August 7, 2026, at 9:00 PM Eastern Time, indicating a rapidly closing opportunity with minimal turnaround. This is issued as a subcontract under the U.S. Department of Agriculture, specifically through the Agricultural Research Service, Agricultural Field Methods and Applications Division, suggesting the equipment will support research-driven agricultural innovation. No point of contact information is provided in the data, and the agency’s physical office address details are incomplete, though the place of performance is clearly designated. Interested parties must submit proposals through the SAM.gov portal using the provided link before the deadline to be considered for award.

Sheet Metal Work Manufacturing

POSTED

DEADLINE