This Solicitation opportunity from Department Of Defense was posted on May 28, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.
DRAPE, SURGICAL
Closed
SPE2DH-26-T-4134FederalSubmission Closed
Contract Overview
Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.
Active Opportunities Like This One
AI Contract Overview
Show more
The contract covers the procurement of disposable surgical drapes made from nonwoven fabric, specifically a half-sheet measuring nominally 44 by 72 inches. These drapes are packaged in units consisting of 20 individually sealed, peel-open or tear-open bags that maintain sterility unless damaged or opened. The product must meet strict requirements for workmanship, sterility, and fluid repellency, conforming to modified military standards including MIL-D-36917 with specified changes for size, folding, marking, and quality control. Packaging and packing must follow commercial standards suitable for safe delivery and handling, with marking in accordance with Medical Marking Standard No. 1, superseding MIL-STD-129. The contract specifies a 36-month extendable shelf life for the drapes and requires compliance with FDA regulations as medical devices. Quality inspection references ANSI/ASQ Z1.4 sampling procedures, while packaging must include lot numbers and sterility legends on both individual and shipping containers. The contract also addresses the exclusion of mercury in materials, requirements for testing fluid repellency and abrasion resistance, and mandates an FDA-approved radiation sterilization process when applicable. Delivery is FOB destination with an inspection at delivery, and quantities ordered under this contract amount to two packages. The contract is managed by the Department of Defense Medical Supply Chain with specified points of contact and logistical delivery details included.
General Info
Procure sterile disposable surgical drapes, meet MIL standards, FDA compliant, 36-month shelf life, FOB delivery.
Agency
Department Of Defense → MEDICAL SUPPLY CHAIIN FSH
NAICS
423450 - Medical, Dental, and Hospital Equipment and Supplies Merchant Wholesalers View NAICS
Place of Performance
ATTN CL VIII MED REQ PROCES ACT, APO, AE, 09227-0000, USSet-Aside
NONE
Timeline
1 update
PhaseClosed
Submission Closed
Organization & Contact Information
Show more
AgencyDepartment Of Defense → MEDICAL SUPPLY CHAIIN FSH
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → MEDICAL SUPPLY CHAIIN FSH
Office AddressUS
Contacts
Full Description
Show more
DRAPE,SURGICAL
DRAPE, SURGICAL
.
HALF SHEET, NONWOVEN FABRIC, DISPOSABLE, 44 BY 72 INCHES NOMINAL.
.
UNIT OF ISSUE PACKAGE (PG)of 20 . RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
MERCURY OR MERCURY CONTAINING COMPOUNDS SHALL
NOT BE INTENTIONALLY ADDED TO<(>,<)> OR COME IN DIRECT
CONTACT WITH<(>,<)> ANY HARDWARE OR SUPPLIES FURNISHED
UNDER THIS CONTRACT. EXCEPTION: FUNCTIONAL MERCURY
USED IN BATTERIES, FLUORESCENT LIGHTS, REQUIRED
INSTRUMENTS; SENSORS OR CONTROLS; WEAPON SYSTEMS;
AND CHEMICAL ANALYSIS REAGENTS SPECIFIED BY NAVSEA.
PORTABLE FLUORESCENT LAMPS AND PORTABLE INSTRUMENTS
CONTAINING MERCURY SHALL BE SHOCK PROOF AND CONTAIN
A SECOND BOUNDARY OF CONTAINMENT OF THE MERCURY OR
MERCURY COMPOUND. (IAW NAVSEA 5100-003D).
APPLICABLE TO ALL MEDICAL ACQUISITIONS:
PACKAGING AND PACKING SHALL BE COMMERCIAL AS
SPECIFIED IN THE PROCUREMENT DOCUMENT.
EACH COMPLETE UNIT SHALL BE PROPERLY PACKAGED
IN A SUITABLE SEALED UNIT CONTAINER CAPABLE
OF PROTECTING THE CONTENTS FROM DAMAGE AND/OR
BREAKAGE.
UNITS SHALL BE PACKED IN SUITABLE COMMERCIAL
EXTERIOR (SHIPPING) CONTAINERS (EXPORT WHEN
NECESSARY) WHICH SHALL INSURE ACCEPTANCE AND
SAFE DELIVERY BY COMMON OR OTHER CARRIER, AT
THE LOWEST RATE, TO POINT OF DELIVERY CALLED
FOR IN THE CONTRACT OR ORDER.
MATERIAL MUST BE MARKED IAW MEDICAL MARKING
STANDARD NO. 1. THIS SUPERCEDES ALL REFERENCES
TO MIL-STD-129.
COPIES OF MEDICAL MARKING STANDARD NO. 1
(MMS NO. 1) MAY BE OBTAINED BY CONTACTING DLA
TROOP SUPPORT VIA EMAIL TO fssb@dla.mil. MMS NO. 1 IS ALSO AVAILABLE ONLINE AT:
SPE2DH-26-T-4134
SECTION B
https://www.dla.mil/Logistics-Operations/Packaging/
RD003, COVERED DEFENSE INFORMATION POTENTIALLY APPLIES
.
SHALL BE IN ACCORDANCE WITH MIL-D-36917 DATED
6 DECEMBER 1972 AND AMEND 1 DATED 23 OCTOBER
1975 EXCEPT AS FOLLOWS:
.
CHANGES TO MIL-D-36917:
PAGE 1, UNDER "CLASS C-LARGE SHEET" DELETE "87 X
104" AND SUBSTITUTE "70 X 100".
.
PAGES 1-2, PARA. 2.1, UNDER "SPECIFICATIONS
FEDERAL" DELETE ALL REFERENCE TO PPP-B-636;
UNDER "STANDARDS MILITARY" DELETE ALL REFERENCE
TO MIL-STD-105 AND MIL-STD-129; ADD THE FOLLOWING:
"OTHER
."MEDICAL MARKING STANDARD NO. 1".
.
PAGE 2, PARA. 2.2, ADD THE FOLLOWING:
"ASTM INTERNATIONAL
."D 3951 STANDARD PRACTICE FOR COMMERCIAL
. PACKAGING.
"(APPLICATION FOR COPIES SHOULD BE ADDRESSED TO
ASTM INTERNATIONAL, 100 BARR HARBOR DRIVE, WEST
CONSHOHOCKEN, PA 19428-2959.)
.
"AMERICAN NATIONAL STANDARDS INSTITUTE
."ANSI/ASQ Z1.4 SAMPLING PROCEDURES AND TABLES
. FOR INSPECTION BY ATTRIBUTES.
"(APPLICATION FOR COPIES SHOULD BE ADDRESSED TO
THE AMERICAN NATIONAL STANDARDS INSTITUTE, 11
WEST 42ND STREET, NEW YORK, NY 10036-8002.)"
.
PAGE 2 OF MIL-D-36917, TABLE I, IN THE
"COMPONENT" COLUMN FOR "CLASS A-SPLIT SHEET".
LINE 3: DELETE "TAIL" AND SUBSTITUTE
"APERTURE".
.
PAGE 3, TABLE I, UNDER "CLASS C-LARGE SHEET"
DELETE "104 X 87" AND SUBSTITUTE "70 X 100".
.
PARA 3.2 STERILITY. ADD TO END OF PARAGRAPH
"WHEN A RADIATION STERILIZATION PROCESS IS USED,
DOSIMETRY RELEASE IS AUTHORIZED AS AN ALTERNATE
METHOD IN ACCORDANCE WITH AAMI PROCESS CONTROL
GUIDELINES FOR GAMMA, RADIATION STERILIZATION OF
MEDICAL DEVICES, PROVIDED THE MANUFACTURER'S
PROCESS IS APPROVED BY FDA."
.
PARA 3.3 DELETE AND SUBSTITUTE:
'PARA. 3.3 FOLDING. THE DRAPE SHALL BE GIVEN A
STANDARD FAN FOLD. THE DRAPE SHALL FIRST BE
FOLDED LENGTH-WISE, THEN FLAT FOLDED FROM EACH
END TOWARD THE CENTER. THE FOLDED DRAPE WILL
THEN BE PLACED IN THE CENTER OF THE OUTERWRAP.
THE OUTERWRAP WILL FIRST BE FOLDED FROM THE
BOTTOM CORNER, THEN THE RIGHT CORNER, THEN THE
LEFT CORNER, AND FINALLY THE TOP CORNER FORMING
A TUCK AND TAB.'
.
DELETE PARA. 3.4 ENTIRELY AND SUBSTITUTE:
"3.4 MARKING. EACH DRAPE SHALL BE MARKED TO
INDICATE CLASS AND SIZE. IN ADDITION, EACH
CLASS A SPLIT SHEET DRAPE SHALL BE MARKED WITH
THE LEGEND "SPLIT" AND AN ARROW INDICATING THE
LOCATION OF THE SPLIT."
SPE2DH-26-T-4134
SECTION B
.
PARA. 3.5, ADD THE FOLLOWING "ALL CUT EDGES
SHALL BE SMOOTH AND STRAIGHT, NOT ROUGH AND
RAGGED."
.
PAGE 5, PARA. 4.2.1, DELETE "MIL-STD-105" AND
SUBSTITUTE "ANSI/ASQ Z1.4".
.
PAGE 5, PARA. 4.2.2, TABLE III, MAJOR DEFECT
102, DELETE ENTIRELY AND SUBSTITUTE:
"102 COMPONENTS NOT FOLDED IN ACCORDANCE WITH
PARA 3.3."
.
3.4 WORKMANSHIP. AT END OF PARAGRAPH ADD: "ALL
THE CUT EDGES SHALL BE SMOOTH AND STRAIGHT AND
NOT BE ROUGH OR RAGGED."
.
PAGE 6. UNDER "MINOR" DEFECTS ADD THE
FOLLOWING:
"204. ANY CUT EDGE NOT SMOOTH OR STRAIGHT AND
IS ROUGH OR RAGGED."
.
PARA 4.3 STERILITY TEST. ADD TO END OF PARAGRAPH
"WHEN A RADIATION STERILIZATION PROCESS IS USED,
DOSIMETRY RELEASE IN ACCORDANCE WITH AAMI
PROCESS CONTROL GUIDELINES FOR GAMMA RADIATION
STERILIZATION OF MEDICAL DEVICES, IS AN
ACCEPTABLE SUBSTITUTE, PROVIDED THE PROCESS IS
APPROVED BY FDA."
.
.
----------------------------------
CHANGES TO COMPONENT SPEC MIL-F-36901:
TABLE I ADD NEW REQUIREMENT.
"LOW-SURFACE TENSION TYPE III-IIIA-IIIB
"MINIMUM ALCOHOL REPELLENCY 777
.
TABLE III ADD NEW CHARACTERISTIC AND TEST
METHOD AS FOLLOWS:
"LOW-SURFACE TENSION FLUID REPELLENCY
. ALCOHOL REPELLENCY OF NONWOVENS-TEST METHOD
. INDA STANDARD TEST 80.9-74 (R77) 3/"
.
TABLE III, BOTTOM OF TABLE ADD NEW FOOTNOTE
"3/ A CERTIFICATE OF CONFORMANCE WILL BE
ACCEPTABLE FOR THIS CHARACTERISTIC."
.
TABLE III. ACROSS FROM "SPRAY RATING" ADD "OR
MANUFACTURER'S STANDARD ANALYTICAL PROCEDURE
(EP-SAP-21.01) FOR WATER REPELLENCY SPRAY TEST."
.
TABLE III. ACROSS FROM "ABRASION RESISTANCE" ADD
"OR MANUFACTURER'S STANDARD ANALYTICAL PROCEDURE
(EP-SAP-1.01) FOR SURFACE ABRASION RESISTANCE."
----------------------------------
.
.
IN MIIL-D-36917, PAGES 7 AND 8, DELETE SECTION 5
(PARA. 5. THROUGH 5.3.2) ENTIRELY AND IN
AMENDMENT-1, PAGE 2, DELETE PARAGRAPHS 5.1
THROUGH 5.3.2.2 ENTIRELY AND SUBSTITUTE:
.
"5. PACKAGING
.
"5.1 PRESERVATION. PRESERVATION SHALL BE
COMMERCIAL, AS SPECIFIED (SEE 6.1).
.
"5.1.1 UNIT. PACKAGE (PG).
.
"5.1.1.1 CLASS B AND CLASS C DRAPES. ONE
SPE2DH-26-T-4134
SECTION B
PACKAGE CONTAINING 20 INDIVIDUALLY PACKAGED
DRAPES OF ONE CLASS ONLY, AS SPECIFIED,
CONSTITUTES ONE UNIT. EACH FOLDED DRAPE AND
OVERWRAP, ASSEMBLED AND FOLDED AS SPECIFIED IN
PARAS. 3.1 AND 3.3, SHALL BE SUPPLIED IN A
SUITABLE SEALED, PEEL-OPEN OR TEAR OPEN,
ANTI-STATIC BAG, CAPABLE OF MAINTAINING
STERILITY OF CONTENTS UNLESS BAG IS DAMAGED OR
OPENED.
.
"5.1.1.2 CLASS A DRAPES. ONE PACKAGE
CONTAINING 22 INDIVIDUALLY PACKAGED DRAPES, AS
SPECIFIED, CONSTITUTES ONE UNIT. EACH FOLDED
DRAPE AND OVERWRAP, ASSEMBLED AND FOLDED AS
SPECIFIED IN PARAS. 3.1 AND 3.3, SHALL BE
SUPPLIED IN A SUITABLE SEALED, PEEL-OPEN OR
TEAR-OPEN, BAG CAPABLE OF MAINTAINING STERILITY
OF CONTENTS UNLESS BAG IS DAMAGED OR OPENED.
.
"5.2 PACKING. PACKING SHALL BE COMMERCIAL, AS
SPECIFIED (SEE 6.2).
.
"5.2.1 COMMERCIAL. SHIPPING CONTAINER SHALL
CONTAIN ONE UNIT. DRAPES PACKAGED AS SPECIFIED
IN PARAS. 5.1.1.1 AND 5.1.1.2 SHALL REQUIRE
NO FURTHER OVERPACKING.
.
"5.2.2 UNITIZED LOADS. MATERIAL SHALL BE
UNITIZED AS SPECIFIED IN THE CONTRACT OR ORDER.
.
"5.3 MARKING.
.
"5.3.1 INDIVIDUAL PACKAGE. EACH INDIVIDUAL
PACKAGE SHALL BE MARKED IN ACCORDANCE WITH
COMMERCIAL PRACTICE. MARKING SHALL INCLUDE THE
LOT (CONTROL) NUMBER AND THE LEGEND(S):
"STERILE" AND "STERILITY GUARANTEED UNLESS
PACKAGE IS DAMAGED OR OPENED" OR SIMILAR
COMMERCIAL LEGEND(S).
.
"5.3.2 EXTERIOR (SHIPPING) CONTAINER. EACH
EXTERIOR (SHIPPING CONTAINER SHALL BE MARKED AS
SPECIFIED IN MEDICAL MARKING STANDARD NO. 1.
MARKING SHALL INCLUDE THE LOT (CONTROL) NUMBER.
.
"5.3.3 UNITIZED LOAD. EACH UNITIZED LOAD SHALL
BE MARKED AS SPECIFIED IN MEDICAL MARKING
STANDARD NO. 1. MARKING SHALL INCLUDE THE LOT
(CONTROL) NUMBER.
.
"5.4 PACKAGING INSPECTION. THE INSPECTION OF
THESE PACKAGING REQURIEMENTS SHALL BE IN
ACCORDANCE WITH PARA. 4.2.1."
----------------------------------
.
.
CHANGES TO AMENDMENT-1:
.
PAGES 1-2, PARA. 4.4, DELETE "MIL-STD-105" AND
SUBSTITUTE "ANSI/ASQ Z1.4".
.
PAGE 3, DELETE NSN LISTING ENTIRELY AND
SUBSTITUTE:
"NSN CLASS ITEM IDENTIFICATION
6530-01-032-4088 C DRAPE, SURGICAL,
. LARGE SHEET, NONWOVEN
. FABRIC, DISPOSABLE,
. 70 BY 100 INCHES, 20S
6530-01-032-4089 B DRAPE, SURGICAL, HALF
. SHEET, NONWOVEN
SPE2DH-26-T-4134
SECTION B
. FABRIC, DISPOSABLE,
. 44 BY 72 INCHES, 20S.
6530-01-110-9192 A DRAPE, SURGICAL,
. SPLIT SHEET, NONWOVEN
. FABRIC, DISPOSABLE,
. 87 BY 120 INCHES,
. 22S"
.
.
6530-01-032-4088/4089/01-110-9192 10 APR 07
This device or drug is regulated by the FDA. Note to Buyers: The contracting official shall send a referral in EBS to the product specialist for confirmation. Please include bidder name and bidder contact information, manufacturer name, manufacturer part number, and item description. RS060: Shelf life requirement RS001 for a TYPE 2 (CODE 7) item with a shelf life of 36 month (extendable) applies to this item.
CARDINAL HEALTH 200, LLC 07TA6 P/N 9355 BAXTER HEALTHCARE CORP IV 04687 P/N A9355
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7016959958 0001 PG 2.000
NSN/MATERIAL:6530010324089
DELIVERY (IN DAYS):0104
DELIVER FOB: DESTINATION
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:ZZ CLNG/DRY:Z PRESV MAT:ZZ
WRAP MAT:ZZ CUSH/DUNN MAT:ZZ CUSH/DUNN THKNESS:Z
UNIT CONT:ZZ OPI:M
INTRMDTE CONT:ZZ INTRMDTE CONT QTY:ZZZ
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:ZZ -ZZ Special Requirements
APPLICABLE TO ALL MEDICAL ACQUISITIONS:
PACKAGING AND PACKING SHALL BE COMMERCIAL AS SPECIFIED IN THE PROCUREMENT DOCUMENT.
EACH COMPLETE UNIT SHALL BE PROPERLY PACKAGED IN A SUITABLE SEALED UNIT CONTAINER CAPABLE OF PROTECTING THE CONTENTS FROM DAMAGE AND/OR
SPE2DH-26-T-4134
SECTION B
PR: 7016959958 PRLI: 0001 CONT’D
BREAKAGE.
UNITS SHALL BE PACKED IN SUITABLE COMMERCIAL
EXTERIOR (SHIPPING) CONTAINERS (EXPORT WHEN
NECESSARY) WHICH SHALL INSURE ACCEPTANCE AND
SAFE DELIVERY BY COMMON OR OTHER CARRIER, AT
THE LOWEST RATE, TO POINT OF DELIVERY CALLED
FOR IN THE CONTRACT OR ORDER.
MATERIAL MUST BE MARKED IAW MEDICAL MARKING
STANDARD NO. 1. THIS SUPERCEDES ALL REFERENCES
TO MIL-STD-129.
COPIES OF MEDICAL MARKING STANDARD NO. 1
(MMS NO. 1) MAY BE OBTAINED BY CONTACTING DLA
TROOP SUPPORT VIA EMAIL TO fssb@dla.mil. MMS NO. 1 IS ALSO AVAILABLE ONLINE AT: https://www.dla.mil/Logistics-Operations/Packaging/
PARCEL POST ADDRESS:
WK4FV1
W0CC USA MED MAT CTR EUR
CMR 469
ATTN CL VIII MED REQ PROCES ACT
APO AE 09227-0000
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
WK4FV1
W0CC USA MED MAT CTR EUR
USAMMC E DISTR AND TRANS DIVISION
LUDWIGSHAFENERSTRASSE 31 BLDG 2369
KAISERSLAUTERN 67657
DE
Need Ship Date:00/00/0000 Original Required Delivery Date:05/28/2026
SPE2DH-26-T-4134 NSN/Part Number: 6530-01-032-4089 Quantity: 2 PG Purchase Request: 7016959958QTY: 2 Delivery: 104 days ADO
DRAPE, SURGICAL
.
HALF SHEET, NONWOVEN FABRIC, DISPOSABLE, 44 BY 72 INCHES NOMINAL.
.
UNIT OF ISSUE PACKAGE (PG)of 20 . RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
MERCURY OR MERCURY CONTAINING COMPOUNDS SHALL
NOT BE INTENTIONALLY ADDED TO<(>,<)> OR COME IN DIRECT
CONTACT WITH<(>,<)> ANY HARDWARE OR SUPPLIES FURNISHED
UNDER THIS CONTRACT. EXCEPTION: FUNCTIONAL MERCURY
USED IN BATTERIES, FLUORESCENT LIGHTS, REQUIRED
INSTRUMENTS; SENSORS OR CONTROLS; WEAPON SYSTEMS;
AND CHEMICAL ANALYSIS REAGENTS SPECIFIED BY NAVSEA.
PORTABLE FLUORESCENT LAMPS AND PORTABLE INSTRUMENTS
CONTAINING MERCURY SHALL BE SHOCK PROOF AND CONTAIN
A SECOND BOUNDARY OF CONTAINMENT OF THE MERCURY OR
MERCURY COMPOUND. (IAW NAVSEA 5100-003D).
APPLICABLE TO ALL MEDICAL ACQUISITIONS:
PACKAGING AND PACKING SHALL BE COMMERCIAL AS
SPECIFIED IN THE PROCUREMENT DOCUMENT.
EACH COMPLETE UNIT SHALL BE PROPERLY PACKAGED
IN A SUITABLE SEALED UNIT CONTAINER CAPABLE
OF PROTECTING THE CONTENTS FROM DAMAGE AND/OR
BREAKAGE.
UNITS SHALL BE PACKED IN SUITABLE COMMERCIAL
EXTERIOR (SHIPPING) CONTAINERS (EXPORT WHEN
NECESSARY) WHICH SHALL INSURE ACCEPTANCE AND
SAFE DELIVERY BY COMMON OR OTHER CARRIER, AT
THE LOWEST RATE, TO POINT OF DELIVERY CALLED
FOR IN THE CONTRACT OR ORDER.
MATERIAL MUST BE MARKED IAW MEDICAL MARKING
STANDARD NO. 1. THIS SUPERCEDES ALL REFERENCES
TO MIL-STD-129.
COPIES OF MEDICAL MARKING STANDARD NO. 1
(MMS NO. 1) MAY BE OBTAINED BY CONTACTING DLA
TROOP SUPPORT VIA EMAIL TO fssb@dla.mil. MMS NO. 1 IS ALSO AVAILABLE ONLINE AT:
SPE2DH-26-T-4134
SECTION B
https://www.dla.mil/Logistics-Operations/Packaging/
RD003, COVERED DEFENSE INFORMATION POTENTIALLY APPLIES
.
SHALL BE IN ACCORDANCE WITH MIL-D-36917 DATED
6 DECEMBER 1972 AND AMEND 1 DATED 23 OCTOBER
1975 EXCEPT AS FOLLOWS:
.
CHANGES TO MIL-D-36917:
PAGE 1, UNDER "CLASS C-LARGE SHEET" DELETE "87 X
104" AND SUBSTITUTE "70 X 100".
.
PAGES 1-2, PARA. 2.1, UNDER "SPECIFICATIONS
FEDERAL" DELETE ALL REFERENCE TO PPP-B-636;
UNDER "STANDARDS MILITARY" DELETE ALL REFERENCE
TO MIL-STD-105 AND MIL-STD-129; ADD THE FOLLOWING:
"OTHER
."MEDICAL MARKING STANDARD NO. 1".
.
PAGE 2, PARA. 2.2, ADD THE FOLLOWING:
"ASTM INTERNATIONAL
."D 3951 STANDARD PRACTICE FOR COMMERCIAL
. PACKAGING.
"(APPLICATION FOR COPIES SHOULD BE ADDRESSED TO
ASTM INTERNATIONAL, 100 BARR HARBOR DRIVE, WEST
CONSHOHOCKEN, PA 19428-2959.)
.
"AMERICAN NATIONAL STANDARDS INSTITUTE
."ANSI/ASQ Z1.4 SAMPLING PROCEDURES AND TABLES
. FOR INSPECTION BY ATTRIBUTES.
"(APPLICATION FOR COPIES SHOULD BE ADDRESSED TO
THE AMERICAN NATIONAL STANDARDS INSTITUTE, 11
WEST 42ND STREET, NEW YORK, NY 10036-8002.)"
.
PAGE 2 OF MIL-D-36917, TABLE I, IN THE
"COMPONENT" COLUMN FOR "CLASS A-SPLIT SHEET".
LINE 3: DELETE "TAIL" AND SUBSTITUTE
"APERTURE".
.
PAGE 3, TABLE I, UNDER "CLASS C-LARGE SHEET"
DELETE "104 X 87" AND SUBSTITUTE "70 X 100".
.
PARA 3.2 STERILITY. ADD TO END OF PARAGRAPH
"WHEN A RADIATION STERILIZATION PROCESS IS USED,
DOSIMETRY RELEASE IS AUTHORIZED AS AN ALTERNATE
METHOD IN ACCORDANCE WITH AAMI PROCESS CONTROL
GUIDELINES FOR GAMMA, RADIATION STERILIZATION OF
MEDICAL DEVICES, PROVIDED THE MANUFACTURER'S
PROCESS IS APPROVED BY FDA."
.
PARA 3.3 DELETE AND SUBSTITUTE:
'PARA. 3.3 FOLDING. THE DRAPE SHALL BE GIVEN A
STANDARD FAN FOLD. THE DRAPE SHALL FIRST BE
FOLDED LENGTH-WISE, THEN FLAT FOLDED FROM EACH
END TOWARD THE CENTER. THE FOLDED DRAPE WILL
THEN BE PLACED IN THE CENTER OF THE OUTERWRAP.
THE OUTERWRAP WILL FIRST BE FOLDED FROM THE
BOTTOM CORNER, THEN THE RIGHT CORNER, THEN THE
LEFT CORNER, AND FINALLY THE TOP CORNER FORMING
A TUCK AND TAB.'
.
DELETE PARA. 3.4 ENTIRELY AND SUBSTITUTE:
"3.4 MARKING. EACH DRAPE SHALL BE MARKED TO
INDICATE CLASS AND SIZE. IN ADDITION, EACH
CLASS A SPLIT SHEET DRAPE SHALL BE MARKED WITH
THE LEGEND "SPLIT" AND AN ARROW INDICATING THE
LOCATION OF THE SPLIT."
SPE2DH-26-T-4134
SECTION B
.
PARA. 3.5, ADD THE FOLLOWING "ALL CUT EDGES
SHALL BE SMOOTH AND STRAIGHT, NOT ROUGH AND
RAGGED."
.
PAGE 5, PARA. 4.2.1, DELETE "MIL-STD-105" AND
SUBSTITUTE "ANSI/ASQ Z1.4".
.
PAGE 5, PARA. 4.2.2, TABLE III, MAJOR DEFECT
102, DELETE ENTIRELY AND SUBSTITUTE:
"102 COMPONENTS NOT FOLDED IN ACCORDANCE WITH
PARA 3.3."
.
3.4 WORKMANSHIP. AT END OF PARAGRAPH ADD: "ALL
THE CUT EDGES SHALL BE SMOOTH AND STRAIGHT AND
NOT BE ROUGH OR RAGGED."
.
PAGE 6. UNDER "MINOR" DEFECTS ADD THE
FOLLOWING:
"204. ANY CUT EDGE NOT SMOOTH OR STRAIGHT AND
IS ROUGH OR RAGGED."
.
PARA 4.3 STERILITY TEST. ADD TO END OF PARAGRAPH
"WHEN A RADIATION STERILIZATION PROCESS IS USED,
DOSIMETRY RELEASE IN ACCORDANCE WITH AAMI
PROCESS CONTROL GUIDELINES FOR GAMMA RADIATION
STERILIZATION OF MEDICAL DEVICES, IS AN
ACCEPTABLE SUBSTITUTE, PROVIDED THE PROCESS IS
APPROVED BY FDA."
.
.
----------------------------------
CHANGES TO COMPONENT SPEC MIL-F-36901:
TABLE I ADD NEW REQUIREMENT.
"LOW-SURFACE TENSION TYPE III-IIIA-IIIB
"MINIMUM ALCOHOL REPELLENCY 777
.
TABLE III ADD NEW CHARACTERISTIC AND TEST
METHOD AS FOLLOWS:
"LOW-SURFACE TENSION FLUID REPELLENCY
. ALCOHOL REPELLENCY OF NONWOVENS-TEST METHOD
. INDA STANDARD TEST 80.9-74 (R77) 3/"
.
TABLE III, BOTTOM OF TABLE ADD NEW FOOTNOTE
"3/ A CERTIFICATE OF CONFORMANCE WILL BE
ACCEPTABLE FOR THIS CHARACTERISTIC."
.
TABLE III. ACROSS FROM "SPRAY RATING" ADD "OR
MANUFACTURER'S STANDARD ANALYTICAL PROCEDURE
(EP-SAP-21.01) FOR WATER REPELLENCY SPRAY TEST."
.
TABLE III. ACROSS FROM "ABRASION RESISTANCE" ADD
"OR MANUFACTURER'S STANDARD ANALYTICAL PROCEDURE
(EP-SAP-1.01) FOR SURFACE ABRASION RESISTANCE."
----------------------------------
.
.
IN MIIL-D-36917, PAGES 7 AND 8, DELETE SECTION 5
(PARA. 5. THROUGH 5.3.2) ENTIRELY AND IN
AMENDMENT-1, PAGE 2, DELETE PARAGRAPHS 5.1
THROUGH 5.3.2.2 ENTIRELY AND SUBSTITUTE:
.
"5. PACKAGING
.
"5.1 PRESERVATION. PRESERVATION SHALL BE
COMMERCIAL, AS SPECIFIED (SEE 6.1).
.
"5.1.1 UNIT. PACKAGE (PG).
.
"5.1.1.1 CLASS B AND CLASS C DRAPES. ONE
SPE2DH-26-T-4134
SECTION B
PACKAGE CONTAINING 20 INDIVIDUALLY PACKAGED
DRAPES OF ONE CLASS ONLY, AS SPECIFIED,
CONSTITUTES ONE UNIT. EACH FOLDED DRAPE AND
OVERWRAP, ASSEMBLED AND FOLDED AS SPECIFIED IN
PARAS. 3.1 AND 3.3, SHALL BE SUPPLIED IN A
SUITABLE SEALED, PEEL-OPEN OR TEAR OPEN,
ANTI-STATIC BAG, CAPABLE OF MAINTAINING
STERILITY OF CONTENTS UNLESS BAG IS DAMAGED OR
OPENED.
.
"5.1.1.2 CLASS A DRAPES. ONE PACKAGE
CONTAINING 22 INDIVIDUALLY PACKAGED DRAPES, AS
SPECIFIED, CONSTITUTES ONE UNIT. EACH FOLDED
DRAPE AND OVERWRAP, ASSEMBLED AND FOLDED AS
SPECIFIED IN PARAS. 3.1 AND 3.3, SHALL BE
SUPPLIED IN A SUITABLE SEALED, PEEL-OPEN OR
TEAR-OPEN, BAG CAPABLE OF MAINTAINING STERILITY
OF CONTENTS UNLESS BAG IS DAMAGED OR OPENED.
.
"5.2 PACKING. PACKING SHALL BE COMMERCIAL, AS
SPECIFIED (SEE 6.2).
.
"5.2.1 COMMERCIAL. SHIPPING CONTAINER SHALL
CONTAIN ONE UNIT. DRAPES PACKAGED AS SPECIFIED
IN PARAS. 5.1.1.1 AND 5.1.1.2 SHALL REQUIRE
NO FURTHER OVERPACKING.
.
"5.2.2 UNITIZED LOADS. MATERIAL SHALL BE
UNITIZED AS SPECIFIED IN THE CONTRACT OR ORDER.
.
"5.3 MARKING.
.
"5.3.1 INDIVIDUAL PACKAGE. EACH INDIVIDUAL
PACKAGE SHALL BE MARKED IN ACCORDANCE WITH
COMMERCIAL PRACTICE. MARKING SHALL INCLUDE THE
LOT (CONTROL) NUMBER AND THE LEGEND(S):
"STERILE" AND "STERILITY GUARANTEED UNLESS
PACKAGE IS DAMAGED OR OPENED" OR SIMILAR
COMMERCIAL LEGEND(S).
.
"5.3.2 EXTERIOR (SHIPPING) CONTAINER. EACH
EXTERIOR (SHIPPING CONTAINER SHALL BE MARKED AS
SPECIFIED IN MEDICAL MARKING STANDARD NO. 1.
MARKING SHALL INCLUDE THE LOT (CONTROL) NUMBER.
.
"5.3.3 UNITIZED LOAD. EACH UNITIZED LOAD SHALL
BE MARKED AS SPECIFIED IN MEDICAL MARKING
STANDARD NO. 1. MARKING SHALL INCLUDE THE LOT
(CONTROL) NUMBER.
.
"5.4 PACKAGING INSPECTION. THE INSPECTION OF
THESE PACKAGING REQURIEMENTS SHALL BE IN
ACCORDANCE WITH PARA. 4.2.1."
----------------------------------
.
.
CHANGES TO AMENDMENT-1:
.
PAGES 1-2, PARA. 4.4, DELETE "MIL-STD-105" AND
SUBSTITUTE "ANSI/ASQ Z1.4".
.
PAGE 3, DELETE NSN LISTING ENTIRELY AND
SUBSTITUTE:
"NSN CLASS ITEM IDENTIFICATION
6530-01-032-4088 C DRAPE, SURGICAL,
. LARGE SHEET, NONWOVEN
. FABRIC, DISPOSABLE,
. 70 BY 100 INCHES, 20S
6530-01-032-4089 B DRAPE, SURGICAL, HALF
. SHEET, NONWOVEN
SPE2DH-26-T-4134
SECTION B
. FABRIC, DISPOSABLE,
. 44 BY 72 INCHES, 20S.
6530-01-110-9192 A DRAPE, SURGICAL,
. SPLIT SHEET, NONWOVEN
. FABRIC, DISPOSABLE,
. 87 BY 120 INCHES,
. 22S"
.
.
6530-01-032-4088/4089/01-110-9192 10 APR 07
This device or drug is regulated by the FDA. Note to Buyers: The contracting official shall send a referral in EBS to the product specialist for confirmation. Please include bidder name and bidder contact information, manufacturer name, manufacturer part number, and item description. RS060: Shelf life requirement RS001 for a TYPE 2 (CODE 7) item with a shelf life of 36 month (extendable) applies to this item.
CARDINAL HEALTH 200, LLC 07TA6 P/N 9355 BAXTER HEALTHCARE CORP IV 04687 P/N A9355
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7016959958 0001 PG 2.000
NSN/MATERIAL:6530010324089
DELIVERY (IN DAYS):0104
DELIVER FOB: DESTINATION
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:ZZ CLNG/DRY:Z PRESV MAT:ZZ
WRAP MAT:ZZ CUSH/DUNN MAT:ZZ CUSH/DUNN THKNESS:Z
UNIT CONT:ZZ OPI:M
INTRMDTE CONT:ZZ INTRMDTE CONT QTY:ZZZ
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:ZZ -ZZ Special Requirements
APPLICABLE TO ALL MEDICAL ACQUISITIONS:
PACKAGING AND PACKING SHALL BE COMMERCIAL AS SPECIFIED IN THE PROCUREMENT DOCUMENT.
EACH COMPLETE UNIT SHALL BE PROPERLY PACKAGED IN A SUITABLE SEALED UNIT CONTAINER CAPABLE OF PROTECTING THE CONTENTS FROM DAMAGE AND/OR
SPE2DH-26-T-4134
SECTION B
PR: 7016959958 PRLI: 0001 CONT’D
BREAKAGE.
UNITS SHALL BE PACKED IN SUITABLE COMMERCIAL
EXTERIOR (SHIPPING) CONTAINERS (EXPORT WHEN
NECESSARY) WHICH SHALL INSURE ACCEPTANCE AND
SAFE DELIVERY BY COMMON OR OTHER CARRIER, AT
THE LOWEST RATE, TO POINT OF DELIVERY CALLED
FOR IN THE CONTRACT OR ORDER.
MATERIAL MUST BE MARKED IAW MEDICAL MARKING
STANDARD NO. 1. THIS SUPERCEDES ALL REFERENCES
TO MIL-STD-129.
COPIES OF MEDICAL MARKING STANDARD NO. 1
(MMS NO. 1) MAY BE OBTAINED BY CONTACTING DLA
TROOP SUPPORT VIA EMAIL TO fssb@dla.mil. MMS NO. 1 IS ALSO AVAILABLE ONLINE AT: https://www.dla.mil/Logistics-Operations/Packaging/
PARCEL POST ADDRESS:
WK4FV1
W0CC USA MED MAT CTR EUR
CMR 469
ATTN CL VIII MED REQ PROCES ACT
APO AE 09227-0000
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
WK4FV1
W0CC USA MED MAT CTR EUR
USAMMC E DISTR AND TRANS DIVISION
LUDWIGSHAFENERSTRASSE 31 BLDG 2369
KAISERSLAUTERN 67657
DE
Need Ship Date:00/00/0000 Original Required Delivery Date:05/28/2026
SPE2DH-26-T-4134 NSN/Part Number: 6530-01-032-4089 Quantity: 2 PG Purchase Request: 7016959958QTY: 2 Delivery: 104 days ADO