Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

DRESSING, OCCLUSIVE,

Active
SPE2DS-26-T-305RFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract specifies the procurement of sterile occlusive petrolatum gauze dressings measuring 3 by 18 inches, with a unit of issue as each. These dressings must have a minimum shelf life of 36 months from the date of manufacture, and no more than five months may have elapsed between the manufacturer’s date and delivery to the government. Labeling must include the date of manufacture, expiration or retest date, contract number, and lot number, in strict accordance with Medical Marking Standard No. 1, which supersedes MIL-STD-129. All packaging must be commercial and designed to protect the product from damage, with each unit sealed in a suitable container and grouped in commercial shipping containers that ensure safe, low-cost delivery to Fort Hood, Texas. The product must comply with all applicable DLA packaging and marking requirements, and bidders must clearly identify the source and part number being supplied. The National Stock Number is 6510-01-532-4289, with a quantity of six units required, and delivery must occur within 20 days of award. The solicitation, issued under SPE2DS-26-T-305R, includes technical and quality requirements referenced in the DLA Master List, and the item is classified as a Type I (Code Q) shelf-life item with a non-extendable 36-month life. The solicitation closed on August 10, 2026, and the contract is administered by the Department of Defense through the Medical Supply Chain MD Surg FSF.

General Info

Procure six 3x18 inch sterile petrolatum gauze dressings, 36-month shelf life, deliver to Fort Hood in 20 days.

Agency

Department Of Defense → MEDICAL SUPPLY CHAIN MD SURG FSFView Agency

NAICS

423450 - Medical, Dental, and Hospital Equipment and Supplies Merchant WholesalersView NAICS

Place of Performance

BLDG 4925 SANTA FE AVE, FORT HOOD, TX, 76544, US

Set-Aside

NONE

Documents

(1)

SPE2DS-26-T-305R.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → MEDICAL SUPPLY CHAIN MD SURG FSF
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → MEDICAL SUPPLY CHAIN MD SURG FSF
View Agency Profile
Office AddressUS
Contacts
Seth Tootell
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
DRESSING,OCCLUSIVE,
DRESSING, OCCLUSIVE, ADHESIVE
DRESSING OCCLUSIVE PETROLATUM GAUZE 3X18IN EA;
STERILE
UNIT OF ISSUE: EACH
..
SHALL HAVE A SHELF LIFE OF 36 MONTHS.
NOT MORE THAN 5 MONTHS SHALL HAVE ELAPSED FROM
DATE OF MANUFACTURER TO DATE OF DELIVERY TO THE
GOVERNMENT.
.
SHELF LIFE MARKINGS SHALL BE IN ACCORDANCE WITH
THE LATEST REVISION OF MMS1A.
.ALL LABELS SHALL INCLUDE:
APPLICABLE TO ALL MEDICAL ACQUISITIONS:
PACKAGING AND PACKING SHALL BE COMMERCIAL AS
SPECIFIED IN THE PROCUREMENT DOCUMENT.
EACH COMPLETE UNIT SHALL BE PROPERLY PACKAGED
IN A SUITABLE SEALED UNIT CONTAINER CAPABLE
OF PROTECTING THE CONTENTS FROM DAMAGE AND/OR
BREAKAGE.
UNITS SHALL BE PACKED IN SUITABLE COMMERCIAL
EXTERIOR (SHIPPING) CONTAINERS (EXPORT WHEN
NECESSARY) WHICH SHALL INSURE ACCEPTANCE AND
SAFE DELIVERY BY COMMON OR OTHER CARRIER, AT
THE LOWEST RATE, TO POINT OF DELIVERY CALLED
FOR IN THE CONTRACT OR ORDER.
MATERIAL MUST BE MARKED IAW MEDICAL MARKING
STANDARD NO. 1. THIS SUPERCEDES ALL REFERENCES
TO MIL-STD-129.
COPIES OF MEDICAL MARKING STANDARD NO. 1
(MMS NO. 1) MAY BE OBTAINED BY CONTACTING DLA
TROOP SUPPORT VIA EMAIL TO fssb@dla.mil. MMS NO. 1 IS ALSO AVAILABLE ONLINE AT: https://www.dla.mil/Logistics-Operations/Packaging/
DATE OF MANUFACTURER, EXPIRATION, OR RETEST DATE CONTRACT NUMBER/LOT NUMBER. ..
RD003, COVERED DEFENSE INFORMATION POTENTIALLY APPLIES
..
RS020: Shelf-life requirement RS001 for a TYPE I (CODE Q) item with a shelf life of 36 months (non-extendable) applies to this item.
.. RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS (IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON
SPE2DS-26-T-305R
SECTION B
REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
..
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
..
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
..
BIDDER: PLEASE SPECIFY SOURCE AND PART
NUMBER BEING SUPPLIED.
ADEQUATE DATA FOR THE NSN/Part Number: 6510-01-532-4289 Quantity: 6 EA Purchase Request: 7017716139QTY: 6 Delivery: 20 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 423450
New
DIBBS
DRAPE, SURGICAL
Solicitation # SPE2DH-26-T-5770
The contract is for the procurement of 4 packages of surgical drapes, each containing 40 disposable, sterile, antimicrobial adhesive drapes measuring 35 inches by 23 inches and impregnated with IOBAN. The item is identified by NSN 6530-01-181-8247 and must be delivered within 20 days of award. All units must be sealed in individual containers that protect against damage and packed in commercial shipping containers suitable for safe transport at the lowest cost to the delivery point at Fort Hood, Texas. Packaging and marking must comply with Medical Marking Standard No. 1, which replaces all references to MIL-STD-129, and copies of this standard are available through DLA Troop Support. The procurement falls under the NAICS code 423450 and is managed by the Department of Defense’s Medical Supply Chain FSH. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date. Government identification must be removed from non-accepted supplies, and all data provided must be adequate to support compliance with federal procurement standards. The solicitation number is SPE2DH-26-T-5770, with a response deadline of August 11, 2026, and primary point of contact is Tina Vu.
MEDICAL SUPPLY CHAIIN FSH

POSTED

about 5 hours ago

DEADLINE

in 7 days
View Details
NAICS: 423450
New
DIBBS
DRAPE, SURGICAL
Solicitation # SPE2DH-26-T-5764
The contract specifies the procurement of surgical drapes, specifically an adhesive U-drape measuring 47 inches by 51 inches with a U-slot opening of 20 by 6.375 inches, designed to be impervious for sterile surgical use. Each unit is packaged in a sealed container to prevent damage or contamination, with 40 units per package, and a total of two packages are ordered. The product must maintain a 36-month shelf life from the date of manufacture, with no more than six months elapsed between manufacturing and delivery to the government. Packaging and marking must comply with Medical Marking Standard No. 1, superseding MIL-STD-129, and all units must be shipped in commercial exterior containers suitable for safe transit by common carriers at the lowest rate to the designated delivery point at Fort Hood, Texas. The material must be marked per DLA’s medical marking guidelines, and all packaging requirements align with DLA’s RP001 standards. The NSN is 6530-01-150-3925, with a solicitation number SPE2DH-26-T-5764 issued on August 4, 2026, and responses due by August 11, 2026. Delivery is required within 20 days of award. The contracting authority is the Department of Defense under the Medical Supply Chain FSH, and the primary point of contact is Tina Vu.
MEDICAL SUPPLY CHAIIN FSH

POSTED

about 5 hours ago

DEADLINE

in 7 days
View Details
NAICS: 423450
New
DIBBS
TEST PAPER, CHLORINE DE
Solicitation # SPE2DH-26-T-5766
The contract specifies the procurement of chlorine determination test paper, designed for accurate chlorine level measurement with a color chart ranging from 10 to 200 ppm, supplied in two 15-foot rolls of 5/32 inch width, sufficient for 200 tests. Each package contains ten units, with a total order of four packages. The product is governed by the procurement document SPE2DH-26-T-5766 and must comply with the DLA Master List of Technical and Quality Requirements, including packaging standards under RP001, removal of government identification from non-accepted supplies under RQ011, and medical marking requirements per Medical Marking Standard No. 1, which supersedes MIL-STD-129. All units must be sealed in commercial-quality containers and packed in exterior shipping containers suitable for safe, cost-effective transport to the delivery point at Arcadia, ZIP 34266-8836. The item has a non-extendable shelf life of 36 months, with no more than five months allowed to have passed from the date of manufacture to the date of government delivery. Labeling must include the date of manufacture, expiration or retest date, and the contract number or lot number, following the latest revision of MMS1C. The NSN is 6630-01-012-4093, and delivery is required within 20 days of award. The solicitation, issued on August 4, 2026, with a response deadline of August 11, 2026, is managed by the Department of Defense’s Medical Supply Chain FSH, with Tina Vu as the primary point of contact. Covered defense information provisions and applicable DLA packaging requirements must be fully adhered to, ensuring compliance with federal procurement standards.
MEDICAL SUPPLY CHAIIN FSH

POSTED

about 5 hours ago

DEADLINE

in 7 days
View Details
NAICS: 423450
New
DIBBS
BATTERY, ANALYZER, RECHA
Solicitation # SPE2DH-26-T-5765
The contract specifies the procurement of two rechargeable batteries for the ISTAT Analyzer, identified by NSN 6630-01-526-4098, with a required delivery within 20 days of award. Each unit must be packaged in a sealed container designed to prevent damage or breakage, and all shipments must use commercial exterior shipping containers that ensure safe, cost-effective delivery to the point of performance at JBPHH, Hawaii, under the lowest available freight rates. All labeling and marking must comply with Medical Marking Standard No. 1, which supersedes MIL-STD-129, and bidders are required to provide the source and part number of the batteries being offered. The acquisition falls under a simplified procurement process governed by the DLA Master List of Technical and Quality Requirements, with packaging standards defined by DLA and applicable to all medical acquisitions. Technical and quality requirements are incorporated by reference, and bidders must ensure compliance with all DLA packaging and marking directives, including the potential application of covered defense information. The solicitation, issued under SPE2DH-26-T-5765, has a response deadline of August 11, 2026, and is administered by the Defense Logistics Agency through the Medical Supply Chain FSH, with Tina Vu as the primary point of contact.
MEDICAL SUPPLY CHAIIN FSH

POSTED

about 5 hours ago

DEADLINE

in 7 days
View Details
NAICS: 423450
New
International
Health Shared Services Provincial Health Corporation - Negotiated Request for Proposal - Large Volume Infusion Pumps, Related Accessories, Consumables, and Services
Solicitation # AB-2026-05464
Health Shared Services Provincial Health Corporation is issuing a negotiated request for proposal to secure the supply, installation, maintenance, and related services for large volume infusion pumps, their accessories, and consumables across Alberta. The solicitation, identified as AB-2026-05464, was posted on August 4, 2026, with proposals due by September 15, 2026, at 8:00 PM Mountain Time. All Deliverables must meet specified technical and operational standards to ensure compatibility, safety, and reliability within provincial healthcare facilities. The contract will support consistent, high-quality patient care through standardized equipment and ongoing service support, with performance expected to occur throughout Alberta. Aileen Lai, Lead of the CPSM Center of Excellence, serves as the primary point of contact for inquiries and can be reached via email or phone provided in the posting. Proposals must be submitted through the official procurement portal accessible via the provided UI link.
Health Shared Services Provincial Health Corporation

POSTED

about 7 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 423450
New
DIBBS
BAG, URINE COLLECTION
Solicitation # SPE2DS-26-T-281R
The contract requires the supply of sterile, individually sealed disposable urine collection bags with a 2000 mL capacity, each equipped with a plastic input and drain tube assembly, an anti-reflux valve in the drip chamber, and a hanger for attachment to beds, chairs, or patients. The unit of issue is a package (PG) of 20, with a total quantity of 3 packages ordered. The item is regulated by the FDA as a Class II medical device under Regulation 876.5250, requiring compliance with registration, labeling, and GMP standards, though a 510(k) premarket notification is not explicitly mandated. The product must have a 60-month shelf life with no more than nine months elapsed between the date of manufacture and delivery, and all containers must be marked with the lot number and manufacture date prefixed by “MFD.” Packaging must adhere to commercial standards as specified in the procurement document, conforming to MIL-STD-2073-1E for preservation, packing, and marking, and must follow Medical Marking Standard No. 1 (MMS No. 1), which supersedes MIL-STD-129 for medical items. Markings must include the required lot and manufacturing date information; hazardous or radioactive materials must still comply with MIL-STD-129 where applicable. Delivery is FOB destination to Fort Bliss, Texas, with a 20-day delivery window from order receipt, and inspection and acceptance occur at the destination. The contract mandates electronic invoicing through WAWF and compliance with NIST SP 800-171 for cybersecurity, as well as Hazard Communication Standard requirements for labeling hazardous materials, including pre-award submission of Safety Data Sheets. Contractors must represent their small business status and provide a Unique Entity Identifier and CAGE code, and must comply with labor and anti-trafficking clauses under FAR and DFARS. Pricing information is not provided in the solicitation, but the item is procured under NSN 6515-01-059-2473, and only approved suppliers such as The Kendall Company LP and Cardinal Health 200, LLC are referenced with their respective part numbers.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

1 day ago

DEADLINE

in 2 days
View Details
NAICS: 423450
New
DIBBS
MASK, RESPIRATOR
Solicitation # SPE2DS-26-T-304G
The contract specifies the procurement of NIOSH-approved particulate respirators, designated as PFR95 type, designed for infection control and protection against tuberculosis transmission. Each respirator features fluidshield protection and filters 1.0 micron particles at 99.6 percent efficiency at a flow rate of 50 liters per minute. The masks are regular size, packaged in boxes of 35 units, and must be stored in their original packaging away from contamination, dust, sunlight, extreme temperatures, excessive moisture, damaging chemicals, and radiation. Storage conditions must be maintained between -4°F (-20°C) and +86°F (+30°C) with humidity not exceeding 80 percent. The item has a non-extendable shelf life of 60 months under the RS001 requirement for TYPE I (CODE S) items. The procurement is governed by technical and quality requirements referenced from the DLA Master List of Technical and Quality Requirements, with packaging, identification, and supply handling following DLA standards including RP001 and RQ011. The NSN 6515-01-450-2057 is listed under a single package quantity, with a delivery requirement of 20 days ADO. Bidders must clearly identify the source and part number being supplied. The solicitation, issued under SPE2DS-26-T-304G, was posted on August 3, 2026, with a response deadline of August 10, 2026, and is managed by the Department of Defense through the Medical Supply Chain MD Surg FSF office located at Tinker AFB, Oklahoma. The point of contact is Vernon Stevenson, reachable via phone and email provided.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

1 day ago

DEADLINE

in 6 days
View Details
NAICS: 423450
New
DIBBS
DRAPE, SURGICAL
Solicitation # SPE2DH-26-T-5762
The contract specifies the procurement of surgical drapes made from nonwoven disposable material, sized 18 x 26 inches, intended for minor surgical procedures and required to be individually sealed and sterile. Each unit of issue consists of a package of 300 drapes, and the product must maintain a shelf life of 60 months, with no more than nine months having elapsed between the date of manufacture and the date of delivery to the government. Compliance with DLA Packaging Requirements for Procurement is mandatory, and the technical and quality standards referenced under R and I numbers are defined in the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date or award date depending on acquisition size. The item is identified by NSN 6530-01-169-7491, with a single purchase request for one package and a delivery requirement within ten days of award. The solicitation, numbered SPE2DH-26-T-5762, was posted on August 3, 2026, with responses due by August 10, 2026, under a federal procurement by the Department of Defense’s Medical Supply Chain FSH, and inquiries should be directed to Tina Vu at the provided contact details.
MEDICAL SUPPLY CHAIIN FSH

POSTED

1 day ago

DEADLINE

in 6 days
View Details
NAICS: 423450
New
DIBBS
OMEPRAZOLE EXTENDED-RE
Solicitation # SPE2DP-26-T-4288
The contract calls for the procurement of OMEPRAZOLE EXTENDED-RELEASE CAPSULES in 20 MG delayed-release formulation, packaged in 90-count bottles identified by the unit of issue BT, with each bottle containing 90 capsules. The total quantity requested across seven contract line items is 44 BT, equating to 3,960 bottles, with a unit price of $50.80 per BT, resulting in a total contract value of $2,235.20. All deliveries are FOB destination, with inspection and acceptance occurring at the point of delivery, and no quantity variance is permitted. The required delivery timeframe is 20 days from the order date, with all shipments due by July 29, 2026, except for one line item due on July 28, 2026. The product must be stored at controlled room temperature and must have a minimum of 21 months of remaining shelf life upon delivery, given its 24-month shelf life with no extensions allowed. The manufacturer is SANDOZ INC., with NDC 00781-2868-92, and the item is regulated by the FDA, requiring referral for confirmation prior to award. Packaging and marking must strictly conform to the DLA Master List of Technical and Quality Requirements, which supersede all other standards, including ASTM D3951 and MIL-STD-129. Packaging must ensure protection from damage and breakage, with commercial exterior shipping containers used to facilitate safe and economical transport by common carrier. Palletization must comply with RP001 DLA Packaging Requirements, and each unit pack must have a QUP of 001. All containers must be marked in accordance with Medical Marking Standard No. 1, which has replaced MIL-STD-129, though MIL-STD-129 remains applicable for certain labeling elements as referenced in the contract. Hazardous materials, if identified under FED-STD-313, must be packaged per TQ Requirement IP025; otherwise, commercial packaging per ASTM D3951 applies. Shipment must be sent by the fastest traceable means, and parcel post is explicitly prohibited. Delivery addresses span multiple U.S. military installations, including Fort Bragg, Fort Stewart, Watervliet Arsenal, and other locations, each with unique DoDAACs and point of contact identifiers
MEDICAL SUPPLY CHAIN PHARM FSA

POSTED

1 day ago

DEADLINE

in 2 days
View Details
NAICS: 423450
New
DIBBS
DRAPE, SURGICAL
Solicitation # SPE2DH-26-T-5739
The contract specifies the procurement of a small surgical drape made of transparent, disposable, sterile plastic measuring 1¼ by 17⅜ inches with an adhesive area protected by a liner, intended for general surgical use. Each unit must be individually sealed in a suitable container that safeguards against damage or breakage, and all units must be packed in commercial shipping containers that ensure safe delivery at the lowest carrier rate to the designated point of delivery, which is Offutt AFB, zip 68113-1044. Packaging must comply with Medical Marking Standard No. 1, replacing all references to MIL-STD-129, and all items must be marked accordingly. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on the acquisition type. The item is identified by NSN 6530-01-047-9697 with a quantity of one pack, and delivery is required within five days of award. The solicitation number is SPE2DH-26-T-5739, issued by the Department of Defense’s Medical Supply Chain FSH, with bids due by August 10, 2026, and point of contact established as Tina Vu.
MEDICAL SUPPLY CHAIIN FSH

POSTED

1 day ago

DEADLINE

in 6 days
View Details
NAICS: 423450
New
DIBBS
TEST TUBE, BLOOD COLLEC
Solicitation # SPE2DH-26-T-5759
The contract specifies the procurement of 100 glass vacuum blood collecting test tubes, each with a 15 mL capacity measuring 16 by 125 mm and fitted with a rubber cap, all without anticoagulant and delivered in nonsterile condition. Each package contains 100 units, and the product must have a minimum shelf life of 24 months from the date of manufacture, with no more than three months elapsed between manufacture and delivery to the government. Labeling requirements include the NSN 6640-00-145-1143, manufacturer and CAGE code, date of manufacture, expiration or retest date, and the contract number or lot number. Bidders must clearly identify the source and part number being supplied. All packaging must comply with commercial standards as outlined in the procurement document, ensuring each unit is sealed in a container that protects against damage or breakage, and all units must be packed in commercial exterior shipping containers suitable for safe delivery via common carrier at the lowest possible rate to the designated delivery point in San Antonio, Texas. Material must be marked in accordance with Medical Marking Standard No. 1, superseding MIL-STD-129, and copies of this standard are available through DLA Troop Support. The solicitation is open under contract number SPE2DH-26-T-5759, with bids due by August 10, 2026, and delivery required within 20 days after award.
MEDICAL SUPPLY CHAIIN FSH

POSTED

1 day ago

DEADLINE

in 6 days
View Details
NAICS: 423450
New
DIBBS
RESUSCITATION KIT, MOUT
Solicitation # SPE2DS-26-T-303V
The resuscitation kit is a pediatric-specific, latex-free Broselow Hinkle system designed for emergency use and contains a comprehensive set of components including 26 procedural modules organized across seven pouches, a Broselow tape, two manual resuscitators, four cuff masks, three disposable blood pressure cuffs, one gauge, two Magill forceps, and two laryngoscope handles. The kit is configured as a mouth-to-mask or oronasal resuscitator system, ensuring readiness for airway management in pediatric emergency scenarios. Each unit must have a 24-month shelf life, and no more than three months may have passed between the date of manufacture and delivery to the government to ensure product integrity and usability upon receipt. The kit is identified by NSN 6515-01-513-9276 and is procured under solicitation SPE2DS-26-T-303V, with a requirement for delivery within 20 days of award. Labels must include the NSN, manufacturer and CAGE code, dates of manufacture and expiration or retest, and the contract or lot number, adhering to all technical and quality requirements referenced in the DLA Master List. Packaging, handling, and labeling must comply with DLA standards including RA001, RP001, and RQ011 provisions, ensuring compatibility with federal supply systems and proper identification removal from non-accepted items. The procurement is for a single unit with a purchase request number 7017720931, and performance is specified to occur at Fort Bragg, North Carolina.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

1 day ago

DEADLINE

in 6 days
View Details

More opportunities from Department Of Defense → MEDICAL SUPPLY CHAIN MD SURG FSF

Same awarding agency

NAICS: 339113
New
DIBBS
APPLICATOR, DISPOSABLE
Solicitation # SPE2DS-26-T-305Y
The contract specifies the procurement of a disposable 6-inch wooden rod applicator, sterile and packaged two per packet with 100 packets per unit of issue, supplied by approved vendors including REDI PRODUCTS INC, MEDLINE INDUSTRIES, and McKesson Medical-Surgical. The item is regulated by the FDA and must be sourced only from approved manufacturers with specified part numbers. All packaging must comply with commercial standards and the Medical Marking Standard No. 1, replacing MIL-STD-129, with containers designed to prevent damage and ensure safe transport via common carriers at the lowest cost to the designated delivery point. The product must be free of intentional mercury or mercury compounds except in limited exempted uses, and portable devices containing mercury must meet Navy shockproof and secondary containment requirements. Delivery is required within 20 days FOB destination with zero tolerance for quantity variance, and inspection and acceptance occur at the delivery point. Packaging must adhere to MIL-STD-2073-1E, and all items must be properly marked in accordance with DLA’s medical marking guidelines. The solicitation is issued under contract SPE2DS-26-T-305Y with NSN 6515-00-564-8242, and bidders must clearly identify the company and part number being offered. The government requires confirmation of FDA-regulated status via EBS referral, and technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements referenced in the document. This procurement is for a Fleet Prime Vendor item, and the unit of issue is a package (PG).
Surgical Appliance and Supplies Manufacturing

POSTED

about 5 hours ago

DEADLINE

in 6 days
View Details
NAICS: 339112
New
DIBBS
FLASHLIGHT, EYE EXAM
Solicitation # SPE2DS-26-T-306D
The contract is for the procurement of three disposable, self-contained eye examination flashlights with a blue spot beam, identified by NSN 6515-00-185-9482 and purchase request 7017744837, under solicitation SPE2DS-26-T-306D. The item is classified as a medical device regulated by the FDA, requiring verification by the contracting official through EBS referral with detailed manufacturer and bidder information. Each unit must be packaged in a sealed commercial container that protects against damage and must comply with Medical Marking Standard No. 1, which supersedes MIL-STD-129. Exterior shipping containers must ensure safe, cost-effective delivery via common carrier to the designated destination point. The device must be sourced with a specified manufacturer part number and supplier, and bidders must clearly state their source and part number in their submission. Delivery is required within 55 days of contract award, with a firm delivery date of August 4, 2026, and delivery terms are FOB destination. The units must be marked in accordance with Medical Marking Standard No. 1, and packaging must adhere to commercial standards as specified in the procurement document, not MIL-STD-2073-1E despite earlier references. The shipment is destined for APO AP 96260-5479 for U.S. medical material center purposes, with a secondary freight address at Camp Carroll, Korea. The unit of issue is each (EA), quantity is fixed at three with zero variance allowed, and the unit price is $3.00 for a total contract value of $9.00. All technical and quality requirements are drawn from the DLA Master List of Technical and Quality Requirements, and packaging, marking, and delivery procedures are strictly governed by DLA’s medical logistics directives.
Surgical and Medical Instrument Manufacturing

POSTED

about 5 hours ago

DEADLINE

in 6 days
View Details
NAICS: 339112
New
DIBBS
SUPPORT, BOW
Solicitation # SPE2DS-26-T-306E
The contract specifies the procurement of two aluminum bow supports, each 12 inches nominal in size, designed for use with finger traps and identified by NSN 6515-01-490-5116. These items are intended for medical applications and must comply with all associated technical and quality requirements outlined in the DLA Master List of Technical and Quality Requirements, with applicable references marked by R or I numbers. Packaging and marking must adhere to Medical Marking Standard No. 1, which replaces MIL-STD-129, and each unit must be sealed in a suitable container to prevent damage, with exterior shipping containers meeting commercial standards for safe and cost-effective delivery via common carrier to the designated point of performance in APO, ZIP 96260-5479. The unit of issue is each, and bidders are required to clearly indicate the source and part number being offered. All provisions are governed by the Federal Acquisition Regulation and the DLA Packaging Requirements, and the item must be delivered within 84 days of award. The solicitation, issued under SPE2DS-26-T-306E, was posted on August 4, 2026, with responses due by August 10, 2026, under NAICS code 339112 for medical device manufacturing, and is managed by the Department of Defense’s Medical Supply Chain.
Surgical and Medical Instrument Manufacturing

POSTED

about 5 hours ago

DEADLINE

in 6 days
View Details
NAICS: 334511
New
DIBBS
CABLE, INVASIVE BLOOD P
Solicitation # SPE2DS-26-T-306F
The contract is for a right-angle invasive blood pressure transducer cable with an Edwards connector, intended for use with oval transducers, and is classified under the NSN 6515-01-615-0921. The unit of issue is each, with a quantity of three units required at a unit price of $3.00, totaling $9.00. Delivery is set for 84 days after award, with delivery terms FOB destination, and no variance is permitted in quantity. Inspection and acceptance occur at the destination point. The item is regulated by the FDA, requiring referral to a product specialist in EBS with full bidder and manufacturer details including part numbers. Packaging must comply with the Medical Marking Standard No. 1, which supersedes MIL-STD-129, and each unit must be sealed in commercial-grade containment to prevent damage, with outer shipping containers ensuring safe, low-cost transport to the delivery point. The packaging and marking instructions must strictly adhere to the specified commercial standards outlined in SPE2DS-26-T-306F, and the material is subject to defense information coverage under RD003. The contract references DLA’s technical and quality requirements identified by R and I numbers and mandates that bidders explicitly state the source and part number of the supplied item. The delivery address is APO AE 09227-0000, with freight shipping directed to Kaiserslautern, Germany, and the original required delivery date is August 4, 2026.
Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument Manufacturing

POSTED

about 5 hours ago

DEADLINE

in 6 days
View Details
NAICS: 339112
New
DIBBS
FORCEPS, INTESTINAL
Solicitation # SPE2DS-26-T-306S
The item is a Meeker intestinal forceps with an overall nominal length of 10.75 inches and a right-angle design, intended for surgical use in intestinal procedures. It is identified by NSN 6515-01-499-5074 and sold in units of one each, with a single unit ordered under purchase request 7017314307. Delivery is required within 20 days after order award. The solicitation, numbered SPE2DS-26-T-306S, was posted on August 4, 2026, with responses due by August 10, 2026, and falls under NAICS code 339112 for surgical and medical instrument manufacturing. The contract is issued by the Department of Defense through the Medical Supply Chain MD Surg FSF, with performance to occur in Hampton, Virginia. The technical specifications are governed by the DLA Master List of Technical and Quality Requirements, referenced by R or I numbers, and must comply with the revision in effect on the solicitation or award date depending on acquisition size. Packaging must adhere to DLA standards, and any non-accepted supplies must have government identification removed prior to return. Bidders are required to clearly state the source and part number being offered. Additionally, the contract is subject to Covered Defense Information requirements, indicating that the item may involve sensitive or controlled data under federal procurement protocols.
Surgical and Medical Instrument Manufacturing

POSTED

about 5 hours ago

DEADLINE

in 6 days
View Details
NAICS: 339113
New
DIBBS
SKIN CLOSURE, ADHESI
Solicitation # SPE2DS-26-T-306Y
The contract specifies the procurement of sterile adhesive skin closures in the form of Steri-Strip wound closure strips measuring 0.25 inches by 3 inches, with a total quantity of 150 strips per package. The strips are supplied in fifty sealed plastic envelopes, each containing three strips, and are available in two alternate backings: polypropylene film and nonwoven nylon fabric, both porous. The product must have a shelf life of 36 months, with no more than five months elapsed between the manufacturer’s date and delivery to the government. Labeling must include the date of manufacture, expiration or retest date, contract number, and lot number, all in compliance with the latest revision of Medical Marking Standard No. 1, which replaces MIL-STD-129. Packaging must meet commercial standards, with each unit sealed in a protective container and shipped in suitable exterior packaging to ensure safe delivery at the lowest carrier rate to the specified point of delivery in Hurlburt Field, Florida. The item is identified by NSN 6510-00-913-5874 and is classified as a Type I (Code Q) shelf-life item with a non-extendable 36-month expiration. All technical and quality requirements are governed by the DLA Master List, and bidders must provide the source and part number being offered. The solicitation, issued under SPE2DS-26-T-306Y, requires bids to be submitted by August 10, 2026, with delivery expected within 20 days of award.
Surgical Appliance and Supplies Manufacturing

POSTED

about 5 hours ago

DEADLINE

in 6 days
View Details
NAICS: 325611
New
DIBBS
SANITIZER, HAND
Solicitation # SPE2DS-26-T-305X
The contract is for a hand sanitizer classified as a waterless cleanser with an alcohol base containing 70% ethyl alcohol, unscented, and packaged in 4 fluid ounce bottles. Each unit of issue is a package containing 24 bottles, and the total order consists of two such packages. The item must have a mandatory 36-month shelf life that is non-extendable, and no more than five months may have passed from the date of manufacture to the date of delivery to the government. Packaging must comply with DLA packaging requirements, and the product must meet all technical and quality standards outlined in the DLA Master List of Technical and Quality Requirements. Government identification must be removed from any non-accepted supplies. The item is identified by NSN 8520-01-346-9200, with a delivery deadline of 20 days after contract award. The solicitation was issued under SPE2DS-26-T-305X, with a response deadline of August 10, 2026, and is managed by the Department of Defense’s Medical Supply Chain under the office in San Antonio, Texas. Primary point of contact is Mary-Kathryn Donahue, reachable via email and phone provided.
Soap and Other Detergent Manufacturing

POSTED

about 5 hours ago

DEADLINE

in 6 days
View Details
NAICS: 327992
New
DIBBS
MEDICAL SUPPLY SET, OBS
Solicitation # SPE2DS-26-T-306G
The contract specifies the procurement of three Medical Supply Sets for Obstetrical Field Use, each containing a complete sterile kit designed for emergency obstetrical care. Each set includes sterile exam gloves, an obstetrical napkin, antiseptic towelettes, umbilical cord clamps, a disposable scalpel, a plastic apron, a 17x24 inch plastic-lined underpad, two 13x19 inch disposable towels, a 40x48 inch drape sheet, a plastic placenta bag, two plastic twist ties, a 2-ounce bulb syringe, four sterile 4x4 inch gauze sponges, a sterile foil baby bunting, and a newborn diaper, all packed in an OB box. The items are regulated by the FDA and must be supplied with full source and part number disclosure. Packaging and labeling must comply strictly with DLA’s Medical Marking Standard No. 1, superseding MIL-STD-129, and adhere to DLA packaging requirements RP001. Units must be individually sealed and shipped in commercial outer containers suitable for safe transit by common carrier under the lowest cost terms, with no parcel post permitted. Delivery is FOB destination with zero tolerance for quantity variance and a required delivery date of August 6, 2026. Two sets are destined for USS Ronald Reagan, and one for USS Zumwalt, with shipments required to be made via traceable means using DLA’s VSM system and RDD 777 protocol. All technical and quality requirements from the DLA Master List take precedence over commercial standards like ASTM D3951, and suppliers must confirm FDA compliance through EBS referral prior to award.
Ground or Treated Mineral and Earth Manufacturing

POSTED

about 5 hours ago

DEADLINE

in 6 days
View Details
NAICS: 336413
New
DIBBS
DRY FIRE MAGAZINE, P
Solicitation # SPE2DS-26-T-306A
The dry fire magazine is a non-functional training aid designed exclusively for resetting the trigger assembly of a 9mm pistol during marksmanship drills. It has precise dimensional requirements: length between 5.05 and 5.07 inches, height between 1.56 and 1.58 inches, width between 1.19 and 1.21 inches, and a cubic measure of 9.53 cubic inches. It is incapable of holding any ammunition and serves solely as a mechanical training device to simulate magazine insertion and trigger manipulation without live rounds. The unit of issue is each, and the item is identified by NSN 6910-01-708-4254 with a procurement quantity of 20 units. This acquisition is governed by DLA packaging and technical requirements referenced in the DLA Master List of Technical and Quality Requirements, with compliance determined by the version in effect on the solicitation or award date. Removal of government identification from non-accepted supplies is mandated under RQ011. The contract solicitation, numbered SPE2DS-26-T-306A, was posted on August 4, 2026, with responses due by August 10, 2026. The procurement falls under NAICS code 336413 and is managed by the Department of Defense’s Medical Supply Chain MD Surg FSF. Delivery is required within 20 days of award, and performance is specified to occur at FPO, ZIP 96673. The primary point of contact for inquiries is Tiffany Parker, reachable via email and phone provided.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 5 hours ago

DEADLINE

in 6 days
View Details
NAICS: 339112
New
DIBBS
TUBING, TRANSDUCER
Solicitation # SPE2DS-26-T-306K
The item is a disposable A-line transducer tubing, 60 inches in length, designed for use with A-line transducers and equipped with a squeeze flush device. It is packaged in units of 20 each, identified by NSN 6515-01-500-7556, and must meet a strict shelf-life requirement of 36 months from the date of manufacture, with no more than five months elapsed between manufacturing and delivery to the government. The product is subject to DLA packaging standards and incorporates technical and quality requirements referenced in the DLA Master List of Technical and Quality Requirements. Removal of government identification from non-accepted supplies is prohibited. The solicitation, issued under SPE2DS-26-T-306K, is for a single packaging unit with a delivery deadline of 20 days after award, and performance is required at Fort Bliss, Texas. The contract is managed by the Department of Defense’s Medical Supply Chain under the NAICS code 339112, with Vernon Stevenson listed as the primary point of contact.
Surgical and Medical Instrument Manufacturing

POSTED

about 5 hours ago

DEADLINE

in 6 days
View Details
NAICS: 339113
New
DIBBS
ELECTRODE, ELECTROCARDI
Solicitation # SPE2DS-26-T-306U
The contract specifies the procurement of eight units of electrocardiograph electrodes designed exclusively for use with the Cardiac Science Powerheart G5 automatic and semi-automatic AEDs. Each unit must be properly sealed in a protective container to prevent damage and packaged in commercial shipping containers suitable for safe delivery via common carriers at the lowest possible rate to the designated delivery point in San Diego, California. The materials must comply with Medical Marking Standard No. 1, which replaces all references to MIL-STD-129, and all packaging and labeling requirements are governed by DLA Packaging Requirements for Procurement and other technical and quality standards referenced in the DLA Master List. Each unit must have a minimum shelf life of 24 months, with no more than three months having elapsed from the date of manufacture to the date of government delivery. Labels on each unit must include the NSN 6515-01-652-8523, manufacturer name and CAGE code, manufacturer date, expiration or retest date, and the contract number or lot number. All supplies are subject to removal of government identification if not accepted, and the solicitation is governed by the revision of the DLA Master List effective on the solicitation issue date. The contract, awarded under solicitation SPE2DS-26-T-306U, has a response deadline of August 10, 2026, and requires delivery within 20 days after order placement.
Surgical Appliance and Supplies Manufacturing

POSTED

about 5 hours ago

DEADLINE

in 6 days
View Details
NAICS: 334511
New
DIBBS
CATHETERIZATION KIT, UR
Solicitation # SPE2DS-26-T-305W
The contract specifies the procurement of a urethral catheterization kit, designated as a 16FR Foley catheter with a 2000 mL anti-reflux valve bag, packaged in units of 10 per pack (PG). Each kit includes sterile drapes, underpads, specimen containers, five prep balls, povidone-iodine solution, gloves, prefilled syringes with 10 CC sterile water and lubricant, and forceps. The product must have a 36-month shelf life, with no more than five months elapsed from manufacture to government delivery. Packaging must comply with DLA Packaging Requirements, Medical Marking Standard No. 1, and ASTM D3951, with labeling requirements including NSN, manufacturer and CAGE code, manufacture and expiration dates, contract and lot numbers. The item is regulated by the FDA and requires referral via EBS for confirmation. Two delivery locations are specified: USS ZUMWALT DDG 1000 in FPO AP and Fort Campbell, KY, with shipments prohibited from using parcel post and requiring traceable means. Delivery is due within 20 days from order with zero quantity variance permitted. The unit of issue is PG, and the NSN is 6515016152124. Manufacturer part numbers 899616 from Cardinal Health 200, LLC and C. R. Bard, Inc. are accepted. Palletization and marking must adhere strictly to DLA standards, and all packaging documentation must supersede any conflicting requirements.
Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument Manufacturing

POSTED

about 5 hours ago

DEADLINE

in 6 days
View Details