Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

OMEPRAZOLE EXTENDED-RE

Active
SPE2DP-26-T-4490Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

OMEPRAZOLE EXTENDED-RELEASE CAPSULES, 20 MG delayed-release, are procured in 90-count bottles under unit of issue BT, with each bottle containing 90 capsules. The product must have a minimum shelf life of 21 months remaining upon delivery to the first government activity, with a total approved shelf life of 24 months that is non-extendable. All packaging and marking must conform to Medical Marking Standard No. 1, superseding MIL-STD-129, and must ensure protection from damage during transit. Packaging must be commercial grade, using sealed unit containers and appropriately labeled commercial shipping containers suitable for safe delivery via common carrier at the lowest rate to the destination. The item is subject to FDA regulation and requires pre-award confirmation through EBS referral by the contracting official. The supplier must be Sandoz Inc. with NDC 00781-2868-92, and delivery must be FOB destination within 20 days of the contract award. The shipment must be sent via traceable means, excluding parcel post, to Fort Campbell, Kentucky, and must be palletized according to DLA packaging requirements. The material is not classified as hazardous per FED-STD-313 and must be packaged in compliance with ASTM D3951, unless higher DLA technical requirements override it. All labeling, packaging, and documentation must strictly follow DLA’s Master List of Technical and Quality Requirements, and the contract includes a zero tolerance for quantity variance.

General Info

Sandoz Inc. to deliver 20 mg omeprazole capsules, 90-count bottles, FOB destination, 21-month shelf life, DLA-compliant packaging, no variance tolerated.

Agency

Department Of Defense → MEDICAL SUPPLY CHAIN PHARM FSAView Agency

NAICS

423450 - Medical, Dental, and Hospital Equipment and Supplies Merchant WholesalersView NAICS

Place of Performance

BLDG 7244 NIGHTSTALKER WAY, FORT CAMPBELL, KY, 42223-5000, US

Set-Aside

NONE

Documents

(1)

SPE2DP-26-T-4490.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → MEDICAL SUPPLY CHAIN PHARM FSA
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → MEDICAL SUPPLY CHAIN PHARM FSA
View Agency Profile
Office AddressUS
Contacts

Full Description

Show more
OMEPRAZOLE EXTENDED-RELEASE CAPSULES
OMEPRAZOLE EXTENDED-RELEASE CAPSULES
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
.
20 MG DELAYED RELEASE CAPSULES, 90'S BOTTLE
.
U/I "BT" (90'S)
.
STORE AT CONTROLLED ROOM TEMPERATURE
.
SHELF LIFE IS 24 MONTHS. AT LEAST 21 MONTHS SHELF LIFE SHALL
REMAIN AT THE TIME OF DELIVERY TO THE FIRST GOVERNMENT
ACTIVITY
.
LABELING AND MARKING SHALL BE IN ACCORDANCE WITH
MED. MKT STD 1A DTD 2/4/2013
.
APPLICABLE TO ALL MEDICAL ACQUISITIONS:
PACKAGING AND PACKING SHALL BE COMMERCIAL AS
SPECIFIED IN THE PROCUREMENT DOCUMENT.
EACH COMPLETE UNIT SHALL BE PROPERLY PACKAGED
IN A SUITABLE SEALED UNIT CONTAINER CAPABLE
OF PROTECTING THE CONTENTS FROM DAMAGE AND/OR
BREAKAGE.
UNITS SHALL BE PACKED IN SUITABLE COMMERCIAL
EXTERIOR (SHIPPING) CONTAINERS (EXPORT WHEN
NECESSARY) WHICH SHALL INSURE ACCEPTANCE AND
SAFE DELIVERY BY COMMON OR OTHER CARRIER, AT
THE LOWEST RATE, TO POINT OF DELIVERY CALLED
FOR IN THE CONTRACT OR ORDER.
MATERIAL MUST BE MARKED IAW MEDICAL MARKING
STANDARD NO. 1. THIS SUPERCEDES ALL REFERENCES
TO MIL-STD-129.
COPIES OF MEDICAL MARKING STANDARD NO. 1
(MMS NO. 1) MAY BE OBTAINED BY CONTACTING DLA
TROOP SUPPORT VIA EMAIL TO fssb@dla.mil. MMS NO. 1 IS ALSO AVAILABLE ONLINE AT: https://www.dla.mil/Logistics-Operations/Packaging/
SPE2DP-26-T-4490
SECTION B
RD003, COVERED DEFENSE INFORMATION POTENTIALLY APPLIES
1 BT = 90 AV
This device or drug is regulated by the FDA. Note to Buyers: The contracting official shall send a referral in EBS to the product specialist for confirmation. Please include bidder name and bidder contact information, manufacturer name, manufacturer part number, and item description. . RS016: Shelf-life requirement RS001 for a TYPE I (CODE M) item with a shelf life of 24 months (non-extendable) applies to this item.
SANDOZ INC. 0THL4 P/N NDC00781-2868-92
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017732400 0001 BT 1.000
NSN/MATERIAL:6505016247068
DELIVERY (IN DAYS):0020
DELIVER FOB: DESTINATION
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA-QUP:001
IF MATERIAL IS CONSIDERED HAZARDOUS IAW FED-STD-313,
PACKAGE IN ACCORDANCE WITH TQ REQUIREMENT IP025.
IF THE MATERIAL IS NOT CONSIDERED HAZARDOUS, IN ACCORDANCE WITH
FED-STD-313, THE MATERIAL SHALL BE COMMERCIALLY PACKAGED IN ACCORDANCE
WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
BULK BREAK POINT:
W80N5C
0160 AV HQ HHC SPECIAL OPE
AWCF SSF
BLDG 7244 NIGHTSTALKER WAY
SPE2DP-26-T-4490
SECTION B
PR: 7017732400 PRLI: 0001 CONT’D
FORT CAMPBELL KY 42223-5000
US
SHIP BY TRACEABLE MEANS. DO NOT USE PARCEL POST.
FREIGHT SHIPPING ADDRESS:
W80N5C
0160 AV HQ HHC SPECIAL OPE
AWCF SSF
BLDG 7244 NIGHTSTALKER WAY
FORT CAMPBELL KY 42223-5000
US
MARKFOR
W80N5C
0160 AV HQ HHC SPECIAL OPE
AWCF SSF
BLDG 7244 NIGHTSTALKER WAY
FORT CAMPBELL KY 42223-5000
US
M/F: (TCN) W80N5C62120209
RDD: 226
PROJ: TP 3
SUPP ADD: W9046W SIG: C
FOR GOVERNMENT USE ONLY: (IPD) 12
DIC: A0A DIST: V ADV: 2A FC: Z9
Need Ship Date:00/00/0000 Original Required Delivery Date:08/06/2026
SPE2DP-26-T-4490 NSN/Part Number: 6505-01-624-7068 Quantity: 1 BT Purchase Request: 7017732400QTY: 1 Delivery: 20 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 423450
New
DIBBS
DRESSING, OCCLUSIVE,
Solicitation # SPE2DS-26-T-305R
The contract specifies the procurement of sterile occlusive petrolatum gauze dressings measuring 3 by 18 inches, with a unit of issue as each. These dressings must have a minimum shelf life of 36 months from the date of manufacture, and no more than five months may have elapsed between the manufacturer’s date and delivery to the government. Labeling must include the date of manufacture, expiration or retest date, contract number, and lot number, in strict accordance with Medical Marking Standard No. 1, which supersedes MIL-STD-129. All packaging must be commercial and designed to protect the product from damage, with each unit sealed in a suitable container and grouped in commercial shipping containers that ensure safe, low-cost delivery to Fort Hood, Texas. The product must comply with all applicable DLA packaging and marking requirements, and bidders must clearly identify the source and part number being supplied. The National Stock Number is 6510-01-532-4289, with a quantity of six units required, and delivery must occur within 20 days of award. The solicitation, issued under SPE2DS-26-T-305R, includes technical and quality requirements referenced in the DLA Master List, and the item is classified as a Type I (Code Q) shelf-life item with a non-extendable 36-month life. The solicitation closed on August 10, 2026, and the contract is administered by the Department of Defense through the Medical Supply Chain MD Surg FSF.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 15 hours ago

DEADLINE

in 5 days
View Details
NAICS: 423450
New
DIBBS
MANUAL, OTC, TECHNICA
Solicitation # SPE2DH-26-T-5804
This contract pertains to the procurement of a single unit of a regulated medical item identified by NSN 6630014989899 and part number MA-K-10368-6, supplied by DISTRIBUTION SPECIALISTS INC, under solicitation SPE2DH-26-T-5804. The item is subject to strict packaging and marking requirements dictated by the DLA Master List of Technical and Quality Requirements, which override all other standards including ASTM D3951 and MIL-STD-129; instead, packaging must comply with Medical Marking Standard No. 1, available through DLA Troop Support. The product must be sealed in a protective unit container and packed in commercial shipping containers suitable for safe transport at the lowest cost to the designated destination, with no tolerance for quantity variance. The item is regulated by the FDA, requiring referral through EBS for confirmation prior to award, and must include full supplier and manufacturer details. Mercury or mercury-containing compounds are prohibited except in specific functional applications such as batteries, fluorescent lamps, and medical instruments, which must be shockproof and equipped with secondary containment per NAVSEA 5100-003D. Delivery is required FOB destination within 20 days of contract award, with inspection and acceptance also occurring at the destination. Shipping must utilize traceable methods only, explicitly excluding parcel post, and must be directed to the vessel shipment address for USS KANSAS CITY LCS 22 via DLA Vendors using VSM and RDD 777. The contract mandates palletization in accordance with RP001 and adherence to all applicable DLA packaging directives. The government requires specific tracking and administrative codes including DIC A4A, DIST 9B, and FC NR, and the original required delivery date is August 6, 2026, with an assigned project code ZJ7 TP 2 and supplier identifier YNEA01. Contact for inquiries is Tina Vu at DLA, and the solicitation closed on August 11, 2026, with the item classified under NAICS 423450 for medical and surgical equipment distribution.
MEDICAL SUPPLY CHAIIN FSH

POSTED

about 15 hours ago

DEADLINE

in 6 days
View Details
NAICS: 423450
New
DIBBS
ANALYZER, ELECTRONIC
Solicitation # SPE2DH-26-T-5799
The contract pertains to the procurement of one electronic analyzer, specifically an Oil Test Centre, Version F, designed for medical acquisition use. The device operates on AC power with a voltage range of 110.0 to 240.0 volts and features a circuit-based indicator type. It must be delivered as a complete unit, properly packaged in a sealed container capable of preventing damage or breakage, and shipped in commercial exterior containers that ensure safe transport via common carrier at the lowest possible rate to the specified delivery point. All packaging and marking must comply with Medical Marking Standard No. 1, which supersedes MIL-STD-129, and detailed marking instructions are available through DLA Troop Support. The item is identified by NSN 6630-01-498-9905 and is subject to technical and quality requirements listed in the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date. The contract prohibits the intentional use of mercury or mercury-containing compounds in the device or its components, except for functional applications in batteries, fluorescent lights, specified instruments, sensors, controls, weapon systems, and chemical analysis reagents as defined by NAVSEA. Portable fluorescent lamps or instruments containing mercury must be shockproof and include a secondary containment boundary to prevent leakage, in accordance with NAVSEA 5100-003D. Bidders are required to specify the exact source and part number being offered, and the response deadline is August 11, 2026, with delivery expected within 20 days after award. The contract is administered under solicitation SPE2DH-26-T-5799 by the Department of Defense’s Medical Supply Chain FSH, with Tina Vu as the primary point of contact.
MEDICAL SUPPLY CHAIIN FSH

POSTED

about 15 hours ago

DEADLINE

in 6 days
View Details
NAICS: 423450
New
DIBBS
DISPOSAL CONTAINER, HYP
Solicitation # SPE2DH-26-T-5789
The contract specifies the procurement of a transparent red, autoclavable, snap-lid disposal container designed for hypodermic needles and syringes, with a nominal capacity of 5.0 quarts and dimensions of 4.75 inches in depth, and 11 inches in both height and width. Each unit is packaged as a PG, where one PG equals 20 individual containers, and the outer container is made of plastic. The product must comply with DLA packaging requirements and is subject to the DLA Master List of Technical and Quality Requirements, which governs applicable specifications. The container must not contain any heavy metal constituents such as chromium or lead capable of generating hazardous waste. Packaging must adhere to Commercial packaging standards and the Medical Marking Standard No. 1, replacing all references to MIL-STD-129, and must ensure protection from damage during transit in suitable shipping containers. Each unit must be distinctly marked in accordance with the specified medical marking standard and delivered FOB destination within five days of award. The item, identified by NSN 6530-01-283-0098 and manufacturer part number 85131 by COVIDIEN SALES LLC, is regulated by the FDA, requiring a referral through EBS for confirmation. Inspection and acceptance occur at the destination, with zero variance allowed in quantity, and delivery is targeted to Fort Lewis, Washington. The contract falls under the NAICS code 423450 and is issued by the Department of Defense’s Medical Supply Chain FSH.
MEDICAL SUPPLY CHAIIN FSH

POSTED

about 15 hours ago

DEADLINE

in 6 days
View Details
NAICS: 423450
New
DIBBS
TEST PAPER, CHLORINE DE
Solicitation # SPE2DH-26-T-5766
The contract specifies the procurement of chlorine determination test paper, designed for accurate chlorine level measurement with a color chart ranging from 10 to 200 ppm, supplied in two 15-foot rolls of 5/32 inch width, sufficient for 200 tests. Each package contains ten units, with a total order of four packages. The product is governed by the procurement document SPE2DH-26-T-5766 and must comply with the DLA Master List of Technical and Quality Requirements, including packaging standards under RP001, removal of government identification from non-accepted supplies under RQ011, and medical marking requirements per Medical Marking Standard No. 1, which supersedes MIL-STD-129. All units must be sealed in commercial-quality containers and packed in exterior shipping containers suitable for safe, cost-effective transport to the delivery point at Arcadia, ZIP 34266-8836. The item has a non-extendable shelf life of 36 months, with no more than five months allowed to have passed from the date of manufacture to the date of government delivery. Labeling must include the date of manufacture, expiration or retest date, and the contract number or lot number, following the latest revision of MMS1C. The NSN is 6630-01-012-4093, and delivery is required within 20 days of award. The solicitation, issued on August 4, 2026, with a response deadline of August 11, 2026, is managed by the Department of Defense’s Medical Supply Chain FSH, with Tina Vu as the primary point of contact. Covered defense information provisions and applicable DLA packaging requirements must be fully adhered to, ensuring compliance with federal procurement standards.
MEDICAL SUPPLY CHAIIN FSH

POSTED

about 15 hours ago

DEADLINE

in 6 days
View Details

More opportunities from Department Of Defense → MEDICAL SUPPLY CHAIN PHARM FSA

Same awarding agency

NAICS: 325412
New
DIBBS
ISOPROPYL ALCOHOL
Solicitation # SPE2DP-26-T-4494
ISOPROPYL ALCOHOL USP, commonly known as rubbing alcohol, is a 99% isopropanol solution supplied in 473-milliliter bottles, equivalent to one pint or 16 ounces, and is classified as an over-the-counter product regulated by the FDA. It is highly flammable, poses serious eye irritation risks, and may cause drowsiness or dizziness, requiring storage at 20° to 25°C (68° to 77°F) away from heat, sparks, open flames, and hot surfaces with strict no-smoking protocols. The item is identified by NSN 6505-00-205-6513 and must comply with applicable hazardous materials regulations including 49 CFR and ICAO technical instructions. A current Material Safety Data Sheet (MSDS) is mandatory and must accompany each shipment, submitted electronically to DLA.MSDS@DLA.MIL alongside the required cover sheet P-75. Packaging must meet hazardous materials standards, and government identification must be removed from non-accepted supplies. This procurement is governed by DLA’s Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date. The solicitation, issued under SPE2DP-26-T-4494 on August 4, 2026, with a response deadline of August 10, 2026, is for four bottles with a required delivery within five days to Pascagoula, Mississippi, under the NAICS code 325412, managed by the Department of Defense’s Medical Supply Chain Pharma FSA. All bidders must provide manufacturer details, part numbers, and item descriptions for FDA referral via EBS.
Pharmaceutical Preparation Manufacturing

POSTED

about 15 hours ago

DEADLINE

in 5 days
View Details
NAICS: 325412
New
DIBBS
BUPIVACAINE AND EPINEP
Solicitation # SPE2DP-26-T-4478
The contract specifies the procurement of Bupivacaine and Epinephrine Injection, containing 0.500% w/v Bupivacaine HCl and 0.005 mg Epinephrine per mL (1:200,000), packaged in 1.8 mL cartridges, with a unit of issue of one case containing 50 cartridges. The product must be stored at controlled room temperature between 15 and 30 degrees Celsius and must have a minimum shelf life of 15 months at the time of delivery to the first government activity, despite an 18-month maximum shelf life. All packaging and labeling must comply with Medical Marking Standard No. 1, replacing MIL-STD-129, and must be commercially packaged to ensure safe transit under ASTM D3951 or applicable hazardous material standards if classified as hazardous under FED-STD-313. The supply must be free of intentional mercury or mercury compounds, except where functionally necessary and explicitly exempted, and any permitted mercury-containing components must meet Navy shockproof and secondary containment requirements. Delivery is required FOB destination within 20 days to the USS Delaware (SSN 791) at FPO AE 09583, with no variance allowed in quantity, and shipment must use traceable, expedited methods with no parcel post. The item is identified by NSN 6505-01-189-3973 and purchase request 7017729383, with a required delivery date of August 6, 2026. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, which supersedes any conflicting standards.
Pharmaceutical Preparation Manufacturing

POSTED

about 15 hours ago

DEADLINE

in 5 days
View Details
NAICS: 325412
New
DIBBS
VERAPAMIL HYDROCHLO
Solicitation # SPE2DP-26-T-4480
Verapamil Hydrochloride Extended-Release Tablets, 240 mg, are being procured in bottles of 100 tablets each, with a total quantity of two bottles required under contract SPE2DP-26-T-4480. The product must have a minimum of 31 months of shelf life remaining at the time of delivery, with a full 36-month shelf life specified and non-extendable. Packaging must comply strictly with DLA Packaging Requirements for Procurement and the latest Medical Marking Standard No. 1, superseding MIL-STD-129, and must ensure protection from damage during transit. All units must be commercially packaged in suitable exterior shipping containers, meeting the lowest freight rate standard for delivery to the specified destination. The item is regulated by the FDA, and the contracting official must confirm compliance via EBS referral. Manufacturer and distributor information includes Glenmark Pharmaceuticals Inc., USA and Cardinal Health 200, LLC, with the NDC number NDC68462-0260-01. The delivery is FOB destination, with a 20-day delivery window and no quantity variance permitted. Shipment must be traceable and cannot be sent via parcel post; instead, it must be transported using the FASTEST TRACEABLE MEANS with RDD 777 and referenced to the DLA vendor code V23027. The required delivery date is February 17, 2026, and the item is to be delivered to USS IWO JIMA LHD 7, FPO AA 34094. All packaging, labeling, and documentation must adhere to applicable DLA technical and quality requirements listed in the DLA Master List, which take precedence over ASTM D3951 and other commercial standards.
Pharmaceutical Preparation Manufacturing

POSTED

about 15 hours ago

DEADLINE

in 5 days
View Details
NAICS: 325412
New
DIBBS
CARBON DIOXIDE
Solicitation # SPE2DP-26-T-4493
Carbon Dioxide, Technical, USP Cylinder Type E, is being procured in quantities of two units, each containing 6 pounds of gas at a minimum purity of 99.5 percent, pressurized to 1800 PSI, with a total filled weight of 20 pounds excluding the cap. The unit of issue is each (EA), and the material must conform to Medical Marking Standard No. 1, which replaces all references to MIL-STD-129; copies of this standard are available from DLA Troop Support via email or their official website. Each cylinder must be securely packaged in a sealed container to prevent damage or breakage, and shipped in commercially appropriate exterior containers that ensure safe delivery by common carrier at the lowest possible rate to the designated delivery point. Packaging requirements are governed by DLA Packaging Requirements for Procurement, and technical and quality specifications are referenced from the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on acquisition type. The item is identified by NSN 6505-01-212-7489 under Purchase Request 7017735431, with a delivery requirement of 20 days from award. Bidders must clearly state the source and part number being offered, and all supplies must comply with government guidelines for removal of identification from non-accepted items. The solicitation, issued under SPE2DP-26-T-4493 on August 4, 2026, with a response deadline of August 10, 2026, is managed by the Department of Defense’s Medical Supply Chain Pharm FSA, with Shairy M. Cartagena as the primary point of contact.
Pharmaceutical Preparation Manufacturing

POSTED

about 15 hours ago

DEADLINE

in 5 days
View Details
NAICS: 424210
New
DIBBS
ALBUTEROL INHALATIO
Solicitation # SPE2DP-26-T-4470
Albuterol Inhalation Aerosol is a prescription-only medication supplied as a pressurized aluminum canister containing 60 actuations, each delivering 108 micrograms of albuterol sulfate, equivalent to 90 micrograms of albuterol base, through a plastic actuator with a strap cap and built-in counter. The canister has a net weight of 8 grams and must be stored at 20° to 25°C (68° to 77°F), with allowable excursions between 15° and 30°C, following USP controlled room temperature guidelines. The inhaler must be kept with the mouthpiece down, shaken well before each use, and brought to room temperature prior to administration to ensure optimal performance. The product has a non-extendable shelf life of 18 months, and at the time of receipt by the first government activity, a minimum of 15 months of shelf life must remain. It is labeled and marked in compliance with SPE2DP-26-T-4470 and Medical Marking Standard No. 1C, and is classified as a hazardous material with flammable characteristics due to its pressurized contents. The canister must not be punctured, exposed to temperatures above 120°F, or disposed of in fire or incinerators. A current Material Safety Data Sheet (MSDS) is required and must accompany each shipment, submitted electronically to DLA.MSDS@DLA.MIL along with a completed cover sheet. Packaging must conform to 49 CFR and ICAO regulations for hazardous materials. The NSN is 6505-01-649-7928, with a quantity of 15 units ordered under Purchase Request 7017715897, with delivery required within 20 days of award. The solicitation is governed by DLA technical and quality requirements referenced in the DLA Master List, and buyers must confirm regulatory compliance through an EBS referral to the product specialist, providing manufacturer and bidder details. The item is regulated by the FDA and falls under Defense Information potentially subject to additional reporting.
Drugs and Druggists' Sundries Merchant Wholesalers

POSTED

about 15 hours ago

DEADLINE

in 5 days
View Details
NAICS: 325412
New
DIBBS
PERMETHRIN CREAM RINSE
Solicitation # SPE2DP-26-T-4477
Permectrin Cream Rinse is a 1% w/v topical medication packaged as a 2 fl oz plastic squeeze bottle, each unit including a comb for application, and supplied in individual units with a minimum of 21 months of remaining shelf life at time of receipt by the government, ensuring a 24-month total shelf life is maintained. The item is regulated by the FDA and must comply with all applicable medical, packaging, and hazardous materials standards including Medical Marking Standard No. 1, which supersedes MIL-STD-129, and packaging requirements that ensure protection from damage during shipping and compliance with commercial standards for both interior and exterior containers. All shipments must include a current Safety Data Sheet (SDS) formatted per 29 C.F.R. 1910.1200, with labels meeting OSHA’s Hazard Communication Standard and the Globally Harmonized System, and these documents must be submitted for approval before contract award. Each shipment must also carry a copy of the SDS and be marked in accordance with the approved medical marking guidelines. The product is subject to DLA’s technical and quality requirements as outlined in the DLA Master List, and must comply with all applicable transportation regulations including 49 CFR and ICAO standards for hazardous materials. The NSN is 6505-01-256-4972, with two units requested under solicitation SPE2DP-26-T-4477, with a 20-day delivery requirement and a contract awarded to a government activity under the Department of Defense.
Pharmaceutical Preparation Manufacturing

POSTED

about 15 hours ago

DEADLINE

in 5 days
View Details
NAICS: 325412
New
DIBBS
SODIUM PERBORATE
Solicitation # SPE2DP-26-T-4492
Sodium perborate in powder form, packaged in 100-gram bottles, is procured under contract SPE2DP-26-T-4492 for delivery to USS PORTLAND LPD 27 in San Diego, California. The item has a strict 36-month shelf life that is non-extendable and must be stored away from high humidity and temperatures exceeding 32 degrees Celsius, with separation from flammable materials. It is subject to defense information protections and incorporates technical and quality requirements from the DLA Master List, which supersede commercial standards. Packaging must comply with Medical Marking Standard No. 1, replacing MIL-STD-129, and adhere to DLA packaging specifications including palletization and hazardous material handling if applicable. The item is regulated by the FDA, requiring referral through EBS for product specialist confirmation. Delivery is FOB destination within 20 days, with no tolerance for quantity variance, and inspection and acceptance occur at the delivery point. The sole unit of issue is the bottle (BT), with one bottle ordered, and the NSN is 6505-01-307-3268. The contract identifies approved suppliers including Sultan Chemists Inc, Henry Schein Inc, and Patterson Dental Supply, with specific part numbers. Transportation procedures follow DLA directives, and the shipment must be labeled with the provided TCN and reference codes. The original required delivery date is August 6, 2026, with a response deadline of August 10, 2026 for the solicitation.
Pharmaceutical Preparation Manufacturing

POSTED

about 15 hours ago

DEADLINE

in 5 days
View Details
NAICS: 325412
New
DIBBS
SODIUM CHLORIDE INJ
Solicitation # SPE2DP-26-T-4367
Sodium Chloride 0.9% Injection, USP in 500 mL units, packaged 24 per case, is being procured under solicitation SPE2DP-26-T-4367 with a total requirement of 10 cases, to be delivered within 20 days to a military vessel at FPO AP 96673. The item is regulated by the FDA and must comply with the DLA Master List of Technical and Quality Requirements, which supersede all other standards including ASTM D3951. Packaging must meet Medical Marking Standard No. 1, replacing MIL-STD-129, and must ensure the product is sealed, protected from damage, and shipped in commercial exterior containers suitable for safe delivery at the lowest freight rate. Shelf life is strictly 24 months non-extendable, and mercury or mercury-containing compounds are prohibited unless exempted for specific functional uses. The item is classified as a Type I (Code M) medical product and must be marked and labeled according to DLA specifications, including full NDC and manufacturer details. Only approved suppliers such as Baxter Healthcare, B. Braun, McKesson, and others are recognized, and the contract requires strict adherence to hazardous material handling if applicable under Fed-Std-313. Delivery is FOB destination with zero quantity variance allowed, inspection and acceptance occur at point of delivery, and all shipments must follow DLA procurement and transportation procedures, including use of VSM for vessel shipments. The contract is issued under the DoD unit of issue system, with pricing set at $10.00 per case, totaling $100.00, and response to the solicitation is due by August 4, 2026, with a required delivery date of April 22, 2026.
Pharmaceutical Preparation Manufacturing

POSTED

about 15 hours ago

DEADLINE

in 2 days
View Details
NAICS: 325412
New
DIBBS
APPLICATOR, SILVER NITR
Solicitation # SPE2DP-26-T-4469
The applicator consists of a 75% silver nitrate and 25% potassium nitrate mixture fused to one end, measuring six inches or 1.524 centimeters, and is intended for topical use only with a prescription requirement. Each unit of issue is a container holding 100 applicators, which must be stored in the original closed package at room temperature in a dark, dry location, away from organic or oxidizable materials. The item is classified as a Type I (Code M) shelf-life item with a non-extendable shelf life of 24 months. It is regulated by the FDA, and buyers must submit a referral in EBS to confirm product details including bidder and manufacturer information. Hazardous materials regulations apply, requiring a current MSDS to be submitted via DLA.MSDS@DLA.MIL and included with each shipment, with packaging compliant to SPE2DP-26-T-4469 and applicable 49 CFR and ICAO standards. Removal of government identification from non-accepted supplies is required, and covered defense information potentially applies. The NSN is 6505-00-299-9672, with a single contract order quantity and a 10-day delivery requirement after award. The solicitation, issued under SPE2DP-26-T-4469, was posted on August 4, 2026, with responses due by August 10, 2026, and is managed by the Department of Defense’s Medical Supply Chain Pharm FSA, with Nicholas Quigley listed as the primary point of contact.
Pharmaceutical Preparation Manufacturing

POSTED

about 15 hours ago

DEADLINE

in 5 days
View Details
NAICS: 424210
New
DIBBS
LIDOCAINE AND PRILOCAI
Solicitation # SPE2DP-26-T-4475
Lidocaine and prilocaine periodontal gel, marketed as ORAQIX at a 2.5%/2.5% concentration, is a microemulsion dental anesthetic supplied in individual blister-packed cartridges, each containing 1.7 grams of gel, with 20 cartridges per carton. Each cartridge comes with a single-use sterile blunt-tipped applicator and must be stored at controlled room temperature between 20°C and 25°C. The product is regulated by the FDA and classified as a prescription-only device with a non-extendable shelf life of 36 months, requiring labeling in compliance with MMS No. 1. Packaging must conform to DLA specifications, including MIL-STD-129 marking, and all technical and quality requirements from the DLA Master List take precedence over commercial standards. The item is identified by NSN 6505-01-656-9640 and manufacturer part number NDC66312-0110-20 from Dentsply Sirona Inc. The contract, issued under solicitation SPE2DP-26-T-4475, requires delivery of three packages to Seymour Johnson Air Force Base in North Carolina within 20 days of order placement, with FOB destination terms and zero tolerance for quantity variance. Shipping must be conducted via traceable means, explicitly prohibiting parcel post. The delivery is scheduled for August 5, 2026, and the contract includes federal acquisition compliance requirements, including referral protocols for FDA-regulated items through EBS and adherence to covered defense information protocols. The purchasing request number is 7017708438, and all packaging and unit of issue must align with DLA’s authorized standards, with point of contact Lawrence Garnett available for coordination.
Drugs and Druggists' Sundries Merchant Wholesalers

POSTED

about 15 hours ago

DEADLINE

in 5 days
View Details