Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, July 22 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

DRUM, SHIPPING AND S

Active
SPE8ED-26-T-1155Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract specifies the procurement of 166 steel drums with a 55-gallon capacity, each featuring a removable top and locking ring, manufactured under part numbers 055C4-D11STLATS by SKOLNIK INDUSTRIES LLC and UN1A2/X400/S and UN1A2/Y1.5/150 by BOCK DRUM COMPANY, INC. All supplies must comply with MIL-STD-2073-1E packaging standards, be palletized according to RP001, and marked per MIL-STD-129 with no special marking required. Sampling procedures must follow MIL-STD-1916 or ASQ H1331 Table 1, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively; unspecified attributes are deemed major. Zero non-conformances are required in sample lots unless otherwise stated, and manufacturers may choose attribute or variable inspection methods under MIL-STD-1916. Mercury and mercury-containing compounds are strictly prohibited from intentional addition or direct contact with hardware or supplies, except for functional uses in batteries, fluorescent lamps, sensors, weapon systems, or chemically specified reagents approved by NAVSEA; portable mercury-containing devices must include shockproof design and a secondary containment barrier per NAVSEA 5100-003D. All shipments must be delivered FOB origin, inspected and accepted at destination, with no variance permitted in quantity. The delivery timeline is 153 days from contract award, with an original required delivery date of November 3, 2026, and a needed ship date of January 4, 2027. The final destination is the DLA Distribution facility at New Cumberland, Pennsylvania, and transportation must align with DLAD PROC NOTES C19 and C20. The solicitation, issued under SPE8ED-26-T-1155, was set aside for Women-Owned Small Businesses with a NAICS code of 332439, and includes strict controls on defense information handling per RD003.

General Info

166 steel drums, 55-gallon, MIL-STD compliant, delivered FOB origin by Nov 3, 2026, to New Cumberland PA for Women-Owned Small Business.

Agency

Department Of Defense → CONSTRUCTION & EQUIPMENT CONTAINERSView Agency

NAICS

332439 - Other Metal Container ManufacturingView NAICS

Place of Performance

2083 NORMANDY DRIVE DOOR 113 TO 134, NEW CUMBERLAND, PA, 17070-5002, US

Set-Aside

WOSB

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → CONSTRUCTION & EQUIPMENT CONTAINERS
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → CONSTRUCTION & EQUIPMENT CONTAINERS
View Agency Profile
Office AddressUS
Contacts
Ogden Howard
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
DRUM,SHIPPING AND S
DRUM,SHIPPING AND STORAGE
INCLUDE RA001 OBJECT TEXT ID ST LANGUAGE E
INCLUDE RP001 OBJECT TEXT ID ST LANGUAGE E
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
WITH REMOVABLE TOP WITH LOCKING RING MATERIAL: STEEL CAPACITY: 55 GALLON
MERCURY OR MERCURY CONTAINING COMPOUNDS SHALL
NOT BE INTENTIONALLY ADDED TO<(>,<)> OR COME IN DIRECT
CONTACT WITH<(>,<)> ANY HARDWARE OR SUPPLIES FURNISHED
UNDER THIS CONTRACT. EXCEPTION: FUNCTIONAL MERCURY
USED IN BATTERIES, FLUORESCENT LIGHTS, REQUIRED
INSTRUMENTS; SENSORS OR CONTROLS; WEAPON SYSTEMS;
AND CHEMICAL ANALYSIS REAGENTS SPECIFIED BY NAVSEA.
PORTABLE FLUORESCENT LAMPS AND PORTABLE INSTRUMENTS
CONTAINING MERCURY SHALL BE SHOCK PROOF AND CONTAIN
A SECOND BOUNDARY OF CONTAINMENT OF THE MERCURY OR
MERCURY COMPOUND. (IAW NAVSEA 5100-003D).
RD003, COVERED DEFENSE INFORMATION POTENTIALLY APPLIES
SKOLNIK INDUSTRIES LLC 63129 P/N 055C4-D11STLATS
BOCK DRUM COMPANY, INC. 7H662 P/N UN1A2/X400/S
BOCK DRUM COMPANY, INC. 7H662 P/N UN1A2/Y1.5/150
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017422707 0001 EA 166.000
NSN/MATERIAL:8110014999282
DELIVERY (IN DAYS):0153
SPE8ED-26-T-1155
SECTION B
PR: 7017422707 PRLI: 0001 CONT’D
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:10 CLNG/DRY:1 PRESV MAT:00
WRAP MAT:ZZ CUSH/DUNN MAT:ZZ CUSH/DUNN THKNESS:C
UNIT CONT:00 OPI:O
INTRMDTE CONT:ZZ INTRMDTE CONT QTY:AAA
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:00 -00 No special marking
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
CONTRACTOR SHALL PROVIDE PACKAGING PALLETIZING ENSURING EACH DRUM IS PROVIDED PHYSICAL & MECHINCAL PROTECTION AGAINIST DAMAGES DURING TRANSPORT AND STORAGE.
PARCEL POST ADDRESS:
W25G1U
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
W25G1U
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US
Need Ship Date:01/04/2027 Original Required Delivery Date:11/03/2026
SPE8ED-26-T-1155 NSN/Part Number: 8110-01-499-9282 Quantity: 166 EA Purchase Request: 7017422707QTY: 166 Delivery: 153 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 332439
New
DIBBS
SUPPORT, SHIPPING AND SThe contract pertains to the supply of one unit of a Wheel Storage & Transport Frame (WSTF) with part number 09020-A1, manufactured by SharkCage Inc. and identified by NSN 8145-01-586-0408, under solicitation SPE8ED-26-T-1148. Delivery is required within 20 days at FOB destination to the U.S. Naval Air Facility Atsugi in Japan, with inspection and acceptance also occurring at the destination. The item must be packaged in strict compliance with ASTM D3951 and MIL-STD-129, and palletization must adhere to DLA Packaging Requirements for Procurement (RP001), with all technical and quality requirements from the DLA Master List taking precedence. The unit of issue is each, with no variance allowed in quantity. The packaging must be labeled and marked per DLA standards, and government identification must be removed from any non-accepted supplies. Transportation and shipping instructions are governed by DLAD Proc Notes C19 and C20, and the delivery destination includes both a U.S. postal box address and a physical Japanese location. The contract specifies a required delivery date of July 17, 2026, and includes detailed government-only identifiers and point of contact information for Ogden Howard at DLA, who is the primary liaison for this solicitation.
CONSTRUCTION & EQUIPMENT CONTAINERS

POSTED

about 14 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332439
New
DIBBS
CONTAINER, SPECIALThe contract is for one special container, identified by NSN 8145014982253 and part number WFI-500-G, issued under solicitation SPE8ED-26-T-1149 with a total price of $1.00. Delivery is required within 20 days from the order date, FOB origin, with zero variance allowed in quantity and inspection and acceptance occurring at the destination. The container must be packaged and labeled in strict compliance with MIL-STD-129 and ASTM D3951, with the DLA Master List of Technical and Quality Requirements taking precedence over any ASTM standards. Packaging must adhere to RP001 DLA Packaging Requirements for Procurement, including proper palletization and unit of issue specifications. The item is subject to Covered Defense Information requirements, and the supplier, WEL-FAB DEFENSE LLC, must ensure government identification is removed from non-accepted supplies. Shipping must be conducted by traceable means only, excluding parcel post, with both freight and parcel post addresses provided for official use. The required delivery date is July 16, 2026, and the contract is a total small business set-aside under NAICS code 332439, managed by the Department of Defense’s Construction & Equipment Containers office. The primary point of contact is Ogden Howard, reachable via email and phone listed in the document.
CONSTRUCTION & EQUIPMENT CONTAINERS

POSTED

about 14 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332439
New
DIBBS
MODIFICATION KIT, SHThe contract pertains to the procurement of one unit of a Modification Kit, SH, identified by part number 55295B and NSN 8145-01-512-1011, under solicitation SPE8ED-26-T-1153. The item must be delivered within 20 days to Fort Stewart, Georgia, FOB origin, with no tolerance for quantity variance. All packaging and labeling must comply strictly with ASTM D3951 and MIL-STD-129, and palletization must adhere to DLA’s Packaging Requirements for Procurement, with priority given to the DLA Master List of Technical and Quality Requirements, which supersede all other standards. The product must be shipped by the fastest traceable method, explicitly excluding parcel post, and must be marked with the designated military freight identifier. The delivery point and marking address are identical, linked to a specific military unit and building at Fort Stewart, with a required delivery date of July 16, 2026. The contract incorporates critical compliance clauses related to covered defense information, source approval documentation, and the removal of government identification from non-accepted supplies, and all technical and quality standards referenced are governed by the DLA Master List, with revisions controlled by the solicitation or award date depending on acquisition type. The unit of issue is one each, priced at a fixed rate, with an initial point of inspection and acceptance at the destination.
CONSTRUCTION & EQUIPMENT CONTAINERS

POSTED

about 14 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332439
New
DIBBS
COLLAPSIBLE, EQUIPEMENT
CONSTRUCTION & EQUIPMENT CONTAINERS

POSTED

about 14 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332439
New
DIBBS
CLAMP, LOOPThe contract pertains to the procurement of 417 units of CLAMP, LOOP with NSN 5340-01-162-8720 under solicitation SPE4A7-26-T-588J, with a delivery requirement of 176 days after order. This is a source-controlled item requiring manufacturing and testing in strict compliance with limited rights data that only approved vendors can access; vendors must either possess the data or demonstrate traceability to approved sources. A Source Approval Request (SAR) is mandatory for companies seeking to become an approved supplier, and documentation must adhere to RC001 requirements. The use of Class I ozone-depleting chemicals is strictly prohibited in all components, and any substitute materials must receive prior approval unless explicitly authorized by specification. Technical and quality requirements are governed by the DLA Master List, with revision controls based on the solicitation date or amendment date for large acquisitions. Packaging must meet DLA standards as specified in RP001, and all non-accepted supplies must have government identification removed per RQ011. Unique Item Identification is not required as per the Service customer’s request, and DFARS 252.211-7003(c)(1)(i) applies. The item contains export-controlled technical data subject to ITAR or EAR, restricting disclosure to foreign persons regardless of location, and compliance with DFARS 252.225-7048 is mandatory. Access to controlled data is limited to contractors with approved US/Canada Joint Certification Program status who have completed required DLA training and questionnaires. The point of contact is Destiny Stevenson, and performance is designated to Cherry Point, NC.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 14 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332439
New
DIBBS
SHI MThe contract requires the contractor to deliver two units of item 5365-00-633-1303 within 14 calendar days of signing for first article testing by the government at Fleet Readiness Center East in Cherry Point, North Carolina. The government will evaluate these units and provide written notification of conditional approval, approval, or disapproval within 90 calendar days of receipt. These first article units are not counted toward the total production quantity of 92 units specified in the order and will be retained by the government for potential use as a manufacturing standard or destroyed during testing. The contractor must also provide details on current dealer or distributor certification and accreditation, and the “other equivalent” provision is applicable. Fast pay is not authorized under this contract. The full production quantity of 92 units must be delivered within 809 days after contract award, with the solicitation number SPE4A7-26-T-585P and NAICS code 332439. The point of contact is Channon Dillard, and the place of performance is listed as San Diego, California with a response deadline of July 29, 2026.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 14 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332439
New
DIBBS
SUPPORT, SHIPPING ANThis contract issued by the Defense Logistics Agency under solicitation SPE8ED-26-T-1150 requires the delivery of one unit of modular storage equipment identified by part number 55297 and NSN 8145015121015 from SharkCage Inc. located in Spring Branch, TX. The item must be delivered within 20 days of contract award FOB origin with no tolerance for quantity variance and is subject to inspection and acceptance at the destination. All packaging must comply with ASTM D3951, but any conflicting requirements from the DLA Master List of Technical and Quality Requirements take precedence, and all labeling and marking must adhere to MIL-STD-129 as specified under RP001. The unit must be palletized according to DLA procurement packaging standards and shipped via the fastest traceable freight method, excluding parcel post. The delivery destination is Fort Stewart, Georgia, with the shipping address and marcfor information identical, and the contract references unique identifiers such as TCN W33K0961940153, RDD 209, and project code TP 2. The required delivery date is July 16, 2026, and the contract incorporates critical specifications including source approval documentation, removal of government identification from non-accepted supplies, and adherence to federal acquisition protocols for defense-related items potentially involving covered defense information.
CONSTRUCTION & EQUIPMENT CONTAINERS

POSTED

about 14 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332439
New
DIBBS
MODIFICATION KIT, SHThe contract is for a Modification Kit, SH, identified by part number 55262 and NSN 8145015120983, issued under solicitation SPE8ED-26-T-1152 to Sharkcage Inc. located in Spring Branch, TX. The item is classified as a commercial item and must comply with all DLA packaging requirements as outlined in the DLA Master List of Technical and Quality Requirements, with revisions controlled by the solicitation issue date. Delivery is required within 20 days FOB destination, with zero variance allowed in quantity, and inspection and acceptance occur at the destination. Packaging must follow MIL-STD-2073-1E with specified methods for preservation, wrapping, and containerization, and marking must adhere to MIL-STD-129 without special markings. The delivery address is APO AP 96278-2069, while the shipping origin is Osan AB, South Korea. Only one unit is being procured at a total price of $1.00. The contract includes federal use codes and identifiers for tracking, and the required delivery date is July 16, 2026, with a solicitation response deadline of August 3, 2026. The NAICS code is 332439, and the contracting office is under the Department of Defense, with Ogden Howard listed as the primary point of contact.
CONSTRUCTION & EQUIPMENT CONTAINERS

POSTED

about 14 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332439
New
Federal
53--SHI M
DLA Aviation

POSTED

about 19 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332439
New
Federal
BICON - SHIPPING CONTAINER
DLA Troop Support

POSTED

about 19 hours ago

DEADLINE

in 5 days
View Details
NAICS: 332439
New
Federal
81--SHIPPING AND STORAGThis contract pertains to the procurement of shipping and storage containers manufactured in accordance with Container Research Corporation drawing number 05259, 378E001, latest revision, using aluminum shell material and strict compliance with military and industry standards. Every container must be marked with a Unique Identification (UID) in data matrix format, following Mil-STD-130, and assigned a specific serial number format tied to the contract number. The design and fabrication require engineering source approval, and new manufacturers must undergo a pre-award survey. Welding must adhere to AWS D1.1, D1.2, D1.3, and D1.6 standards depending on material, with qualified welders, proper filler metals—4043 for 6061 aluminum and 5356/5556 for 5000 series—and stringent process controls. Surface preparation includes chemical deoxidizing within ten days (or three days if exposed outdoors) followed by mechanical cleaning with non-ferrous tools, and cleaning solutions must exclude sodium hydroxide. Sealing of crevices, use of approved desiccant, and prohibition of cadmium plating in favor of zinc-nickel alloy finish are mandatory. Each container must pass a 100% production leak test using the pneumatic-pressure method per Federal Test Method Standard 101C, involving a 1.0 ± 0.1 PSIG pressurization and 30-minute monitoring for leaks exceeding 0.05 PSIG. A first article test is required unless a waiver is granted based on prior identical production within three years at the same facility with identical processes and no rejections or deviations. Submission of the first article must occur within 120 calendar days, including delivery of one unit to a designated test facility with proper documentation and labeling. Testing includes dimensional inspection, 18-inch free-fall drop, form and fit verification using an actual end item, and both initial and final leak tests. The contractor bears all costs related to first article production, shipping, and rework if disapproved, and may not commence full production before approval. Paint coatings must be applied under TT-C-490 and MIL standards, excluding ozone-depleting chemicals, with a specified gray finish and coating thickness. Packaging follows MIL-STD-2073, and the government may require additional testing, with costs estimated at $10,000 for first article evaluation
Pa DLA Aviation At Philadelphia

POSTED

about 19 hours ago

DEADLINE

in 5 days
View Details
NAICS: 332439
New
SLED
Site Furniture SupplyThe City of Dallas is seeking a subcontractor to supply durable, vandal-resistant site furniture including picnic tables, benches, grills, and trash and recycling receptacles, all constructed from recycled plastic or powder-coated steel to ensure long-term resilience and low maintenance. The furniture must meet rigorous standards for durability and security in public spaces, with materials selected to withstand heavy use and environmental exposure while supporting sustainability goals through the use of recycled content. Submissions are due by July 27, 2026, and the opportunity is classified as a subcontract under NAICS code 332439, which pertains to other fabricated metal product manufacturing. The contract is managed under the City of Dallas’s procurement framework with no specific set-aside designation, and all work must be performed in alignment with the city’s expectations for public infrastructure. Interested parties can access full details through the provided link to the Dallas City Hall procurement portal.
City Of Dallas

POSTED

1 day ago

DEADLINE

in 6 days
View Details

More opportunities from Department Of Defense → CONSTRUCTION & EQUIPMENT CONTAINERS

Same awarding agency

New
DIBBS
ENVELOPE, PACKING LIThe contract pertains to the procurement of 307 envelopes designated by NSN 8105-01-054-8975, with delivery due within 90 days after award. The items must comply with stringent packaging standards, including MIL-STD-2073-1E for preservation and packaging methods, and MIL-STD-129 for marking, with special marking code 00-00 indicating no special labeling requirements. Packaging must adhere to DLA’s procurement requirements and ASTM-D-3951 for commercial packaging, with no variance allowed in quantity—strictly 307 units as specified. The envelopes must meet specific material references: PPP-B-1055B for basis weight 30-50-30, A-A-208C for type I, and TT-I-1795 Type I, with drawing 2510328 Revision C as the governing technical document. Performance is FOB origin, with inspection and acceptance occurring at destination. The solicitation requires compliance with DLA’s master list of technical and quality requirements, and a zero-defect sampling standard under MIL-STD-1916 or comparable zero-based plans, with all unspecified attributes treated as major. Pricing is firm fixed, and the delivery address is designated as DLA Distribution San Joaquin in Tracy, California. The contract references cybersecurity requirements under CMMC Level 2 Self-Assessment and defines applicable technical documentation availability via the DIBBS portal for solicitation-related drawings.

POSTED

about 14 hours ago

DEADLINE

in 6 days
View Details
NAICS: 326299
New
DIBBS
TANK, LIQUID STORAGEThis contract specifies the procurement of a single 5-gallon liquid storage tank with dimensions of 10 3/4 inches internal diameter and 14 11/16 inches length, identified by NSN 5430-01-486-2869 and part number 377-03203-000 from Johnson Controls Navy Systems, LLC. The tank is classified as a critical application item and must comply with DLA packaging requirements and technical standards referenced in the DLA Master List of Technical and Quality Requirements. Mercury and mercury-containing compounds are strictly prohibited from intentional addition or direct contact with the tank unless exempted for specific functional uses such as batteries, fluorescent lamps, sensors, or chemical reagents approved by NAVSEA, with portable devices containing mercury required to be shock-proof and have a secondary containment barrier per NAVSEA 5100-003D. The item is subject to zero-defect sampling under MIL-STD-1916 or equivalent zero-based inspection protocols, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. Delivery is required within five days of contract award, FOB origin, with inspection and acceptance performed at the destination point. Packaging must conform to MIL-STD-2073-1E with preservative method 10, dry climate, and marking in strict compliance with MIL-STD-129, including no special marking code. Palletization follows DLA packaging requirements, and hazardous material shipping protocols apply under IP025. The shipment is not to be sent via parcel post but must use the fastest traceable means, destined for the Carrier Outfitting Matl Support Center in Suffolk, VA. The contract is issued under solicitation SPE8ED-26-T-1147 with a required delivery date of July 20, 2026, and is subject to government-only identifiers and logistics codes for tracking and administrative purposes.
All Other Rubber Product Manufacturing

POSTED

about 14 hours ago

DEADLINE

in 12 days
View Details
New
DIBBS
TANK, LIQUID STORAGE

POSTED

about 14 hours ago

DEADLINE

in 6 days
View Details
NAICS: 332510
New
DIBBS
BASE, SHIPPING AND STOR
Hardware Manufacturing

POSTED

about 14 hours ago

DEADLINE

in 12 days
View Details
NAICS: 327213
New
DIBBS
JAR, SCREW CAP
Glass Container Manufacturing

POSTED

about 14 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333998
New
DIBBS
SEWING MACHINE, INDUSTRThe contract specifies the procurement of industrial sewing machines under NSN 3530011809072, with detailed technical requirements including an arm length of 10.500 inches nominal, stitch type 301 style H with compound alternating presses, and compliance with OO-S-256/1B Class 4. The machines are identified as commercial items and must conform to MIL-STD-130N for government identification marking. Technical and quality standards are governed by the DLA Master List of Technical and Quality Requirements, which supersede all other specifications including ASTM D3951 for packaging, while requiring adherence to MIL-STD-129 for labeling and RP001 for DLA packaging and palletization. Sampling must follow MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise specified, and critical attributes are subject to stringent verification levels. The machines are manufactured by Consolidated Sewing Machine Corp and Pennsylvania Sewing Machine Company under specified part numbers. The contract includes two line items totaling 19 units, with delivery scheduled in 85 days FOB origin and inspection and acceptance occurring at the destination. Units are to be shipped to two DLA distribution centers in Jacksonville, Florida and Cherry Point, North Carolina, with exact packaging, unit of issue, and quantity per unit pack defined per the contract. The need ship date is July 8, 2026, with an original delivery deadline of January 17, 2027. All requirements are governed by the solicitation SPE8ED-26-T-1156, which includes federal contracting clauses, restrictions on government identification removal, and documentation protocols for source approval. The contract is issued under a DoD-authorized unit of issue with pricing provided per unit, and all transportation logistics follow DLAD procedural notes C19 and C20.
All Other Miscellaneous General Purpose Machinery Manufacturing

POSTED

about 14 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333120
New
DIBBS
REEL, CABLEThe contract specifies the procurement of one reel of cable with NSN 8130-01-587-8466 under solicitation SPE8ED-26-T-1154, requiring delivery within 20 days to Hunter Army Airfield in Georgia. The item is classified as a critical application and must conform to strict technical and quality standards referenced from the DLA Master List of Technical and Quality Requirements, with revisions controlled by the solicitation issue date. Packaging must comply with ASTM D3951 and MIL-STD-129, while palletization follows DLA packaging guidelines, and all items must be marked per official instructions with no variance allowed in quantity. Inspection and acceptance occur at destination under zero non-conformance sampling rules per MIL-STD-1916 or equivalent, with critical, major, and minor attributes assigned specific verification levels or AQLs. The contract includes provisions for covered defense information and mandates removal of government identification from non-accepted supplies. Delivery is FOB origin, with shipping and transportation details governed by DLA procedural notes. The sole point of contact is Ogden Howard, and the required delivery date is July 17, 2026.
Construction Machinery Manufacturing

POSTED

about 14 hours ago

DEADLINE

in 12 days
View Details