DRY DOCK REPAIRS FOR USCGC SANIBEL (WPB-1312)

SOURCES SOUGHT NOTICE: DRY DOCK REPAIRS USCGC SANIBEL (WPB-1312) This is a SOURCES SOUGHT NOTICE / REQUEST FOR INFORMATION; not a pre-solicitation notice or solicitation for proposals/quotations. Pursuant to FAR Part 10 (Market Research), the purpose of this notice is to: (1) determine if sources capable of satisfying the agency's requirements exists, (2) determine if commercial items suitable to meet the agency's needs are available or could be modified to meet the agency's requirements, and (3) determine the commercial practices of company's engaged in providing the needed service or supply. Pursuant to FAR Part 6 and FAR Part 19, competition and set-aside decisions may be based on the results of this market research. This notice in no way obligates the Government to any further action. REQUIREMENT: This notice is issued by the U.S. Coast Guard, Surface Force Logistics Center, Norfolk, VA to identify sources capable of providing the following: DRYDOCK Repairs Specification: (Subject to change at the discretion of the Government) Contractor shall provide all necessary facilities, materials, equipment, and personnel to DRYDOCK repairs to the U.S. Coast Guard Cutter (USCGC) SANIBEL (WPB-1312), a 110 Foot "A Class" Patrol Boat. The vessel is home ported in Woods Hole, MA. All work will be performed at the contractor facility. This vessel is geographically restricted to about 540 Nautical miles one way, or 1080 Nautical miles round trip from the cutter's homeport of Woods Hole, MA. Scope of Work: The scope of the acquisition is for the DRYDOCK repairs of the USCGC SANIBEL (WPB-1312). This work will include, but is not limited to the following WORK ITEMS: WORK ITEM 1: Hull Plating, U/W Body, Inspect WORK ITEM 2: Hull Plating (U/W Body), Ultrasonic Testing WORK ITEM 3: Aluminum Hull and Structural Repairs - 1/4" Plate WORK ITEM 4: Aluminum Hull and Structural Repairs - 3/16" Plate WORK ITEM 5: Aluminum Hull and Structural Repairs - 5/16" Plate WORK ITEM 6: Hull and Structural Plating Repairs -Crack (Aluminum) WORK ITEM 7: Hull and Structural Plating Repairs - Crack (Steel) WORK ITEM 8: Hull and Structural Plating Repairs - Eroded Weld (Aluminum) WORK ITEM 9: Steel Hull and Structural Plating Repairs (5-Pound) WORK ITEM 10: Steel Hull and Structural Plating Repairs ( 7.0 Pound, 7.5-Pound or 7.65-Pound) WORK ITEM 11: Steel Hull and Structural Plating Repair s , Corrugated Plate (4.0-Pound) WORK ITEM 12: Hull and Structural Plating Repairs (6.0-Pound or 5.63-Pound) WORK ITEM 13: Appendages (U/W), Leak Test WORK ITEM 14: Appendages (U/W) - Internal, Preserve WORK ITEM 15: Tanks ( Fuel Service), Clean and Inspect WORK ITEM 16: Voids (Non-Accessible), Leak Test WORK ITEM 17: Tanks ( Fuel Stowage and Overflow), Clean and Inspect WORK ITEM 18: Voids (Non-Accessible), Preserve Internal Surfaces WORK ITEM 19: Tanks (Potable Water), Clean and Inspect WORK ITEM 20: 30-Tanks (Dirty Oil and Waste), Clean and Inspect WORK ITEM 21: Propulsion System , Alignment Check WORK ITEM 22: Propulsion Shafting, Remove, Inspect, and Reinstall WORK ITEM 23: Mechanical Shaft Seal Assemblies, Overhaul WORK ITEM 24: Propulsion Shafting Bearings (External), Renew WORK ITEM 25: Prop ulsion Shaft Stern Tube Bearings , Renew WORK ITEM 26: Propellers ; Remove, Inspect, and Reinstall WORK ITEM 27: Exhaust System , MDE , Inspect WORK ITEM 28: Fathometer Transducer, Renew WORK ITEM 30: Speed Doppler, Renew, Doppler Valve, Overhaul WORK ITEM 31: Sea Strainers (All Sizes), Renew WORK ITEM 32: Sea Strainers - Duplex (All Sizes), Overhaul WORK ITEM 33: Steering Gear (General) , Overhaul WORK ITEM 34: Rudder Assembly, Remove, Inspect and Reinstall WORK ITEM 35: Fin Stabilizers (General), Overhaul WORK ITEM 36: Tanks , (Grey Water) Clean and Inspect WORK ITEM 37: Tanks, ( Sewage Holding ) Clean and Inspect WORK ITEM 38: Grey Water Piping , Clean and Flush WORK ITEM 39: Sewage Piping , Clean and Flush (D) WORK ITEM 40: Forward Peak Compartment, Preserve WORK ITEM 41: CPO Stateroom , Preserve WORK ITEM 42: Aft Steering Compartment, Preserve and Insulate WORK ITEM 43: Forward Void, Preserve WORK ITEM 44: Tanks ( Sewage Holding ) , Preserve " 100% " (O) WORK ITEM 45: Tanks ( Aft Grey Water ) , Preserve " 100% " WORK ITEM 46: Tanks (Dirty Oil ), Preserve " 100% " WORK ITEM 47: Tanks (Potable Water), Preserve " 100% " WORK ITEM 48: Bilge Surfaces, Preserve WORK ITEM 49: Battery Space, Preserve and Insulate WORK ITEM 50: U/W Body, Preserve "100%" WORK ITEM 51: U/W Body, Preserve "Partial - Condition A " WORK ITEM 52: U/W Body, Preserve "Partial - Condition B" WORK ITEM 53: U/W Body, Preserve "Partial - Condition C " WORK ITEM 54: Stern Tube Interior Surfaces , Preserve 100% WORK ITEM 55: Hull Plating Freeboard, Preserve " 100% " WORK ITEM 56: Hull Pl ating , Freeboard; Preserve (Partial ) WORK ITEM 57: Superstructure, Preserve "100%" WORK ITEM 58: Superstructure, Preserve " Partial " WORK ITEM 59: Cathodic Protection System, Inspect and Maintain WORK ITEM 60: CAPAC Anode Assembly Renew WORK ITEM 61: Drydocking WORK ITEM 62: Temporary Services, Provide WORK ITEM 63: Data Service , Provide WORK ITEM 64: Deck Covering (Wet/Dry), Seal WORK ITEM 65: Hull Plating ( Freeboard) , Ultrasonic Testing WORK ITEM 66: Pilothouse Deck (Aluminum), Inspect WORK ITEM 67: Rudder(s), Preserve ( "100%" ) WORK ITEM 68: Electro-Hydraulic Crane, Renew WORK ITEM 69: Tank ( Oily Water ), Preserve 100% WORK ITEM 70: Watertight Doors and Scuttles (Internal, DC Deck and Below), Renew WORK ITEM 71: Sea Trial Performance, Provide Support WORK ITEM 72: Sea Valves and Waster Pieces , Overhaul or Renew WORK ITEM 73: Deck Covering (Carpeting) , Renew All welding and brazing shall be accomplished by trained welders who have been certified by the applicable regulatory code performance qualification procedures. Anticipated Period of Performance: The period of performance is anticipated to be for FIFTY-NINE (59) calendar days with a start date of 01 August 2012 and end date of 28 September 2012. (Subject to change at the discretion of the Government) Anticipated NAICS Code/Size Standard: The applicable NAICS Code is 336611, Ship Building and Repairing and the size standard is 1,000 employees. Submission of Information: Companies having capabilities necessary to meet or exceed the stated requirements are invited to provide information to contribute to this market survey/sources sought notice including commercial market information and company information. Companies may respond to this Sources Sought Notice via e-mail to contact@example.gov or via fax to +1 (555) 000-0000 (Attn: Shavonda Jamison/C&P1-PBPL) no later than February 27, 2012 at 3:00PM, Eastern Time with the following information/documentation: 1. Name of Company, Address and DUNS Number. 2. Point of Contact and Phone Number. 3. Business Size applicable to the NAICS Code: 8(a) Small Business Concern; b. HubZone Small Business Concern; c. Service-Disabled Veteran Owned Small Business Concern (SDVOSBC); d. Veteran Owned Small Business Concern (VOSBC); e. ED Woman Owned Small Business Concern (EDWOSB); f. Woman Owned Small Business Concern (WOSBC); g. Small Business Concern; h. Large Business Concern 4. Documentation Verifying Small Business Certification: a. If claiming 8(a) status, provide a copy of your 8(a) Certificate from SBA. b. If claiming HuBZone status, provide a copy of your HuBZone Certificate from SBA. c. If claiming SDVOSBC status, provide documentation that shows the Service Disable Veteran (SDV) unconditionally owns 51 % of the business, controls the management and daily operations, and holds the highest officer position in the company. Documentation should also be provided to show that the SDV has a service-connected disability that has been determined by the Department of Defense or Department of Veteran Affairs. Finally, provide documentation that shows the business is small under the NAICS code 336611. d. If claiming VOSBC status, provide documentation that shows the Veteran unconditionally owns 51% of the business, controls the management and daily operation, make long-term decisions for the business, and holds the highest officer position in the company that works at the business fulltime during normal working hours. The documentation should also show the business is small under the NAICS code 336611. e. If claiming EDWOSB status, provide documentation that shows the company is at least 51% owned by one or more women who are "economically disadvantaged", and primarily managed by an economically disadvantaged woman that make long-term decisions for the business, hold the highest officer position in the business and work at the business full-time during normal working hours. The documentation should also show the business is small under the NAICS code 336611. A woman is presumed economically disadvantaged if she has a personal net worth of less than $750,000 (with some exclusions), her adjusted gross yearly income averaged over the three years preceding the certification less than $350,000, and the fair market value of all her assets is less than $6 million f. If claiming Woman Owned Small Business status, provide documentation that shows the company is at least 51% owned and controlled by one or more women, and primarily managed by one or more women that make long-term decisions for the business and hold the highest officer position in the business and work at the business full time during normal working hours. The women must be U.S. citizens. The documentation should also show the business is small under the NAICS code 336611. g. If claiming Small Business status, provide documentation to show the business is small under NAICS code 336611. 5. Statement of Proposal Submission: Statement on how your company will do the work and that your company WILL submit a proposal as a prime contractor if a solicitation is issued as a result of this Sources Sought Notice. 6. Past Performance Information: Evidence of experience in work similar in type and scope to include contract numbers, project titles, and dollar amounts, points of contact and telephone numbers. If two companies are planning to conduct business as a Joint Venture or any other type of teaming agreement, they shall provide past performance on projects of similar scope that they have performed together as a Joint Venture. Providing individual past performance documentation from each company on separate projects where the two did not work together is not considered to be sufficient past performance. A Joint Venture that cannot provide this requested information will not be considered to have sufficient documentation needed to evaluate past performance as an evaluation factor. CCR: Interested parties should register in the Central Contractor Registration (CCR) as prescribed in FAR Clause 52.232-33. The CCR can be obtained by accessing the internet at www.ccr.gov or by calling +1 (555) 000-0000. Disclaimer and Important Notes: This Sources Sought Notice is for market research purposes only and does not constitute a Request for Proposal/Quotation; and, it is not considered to be a commitment by the Government to award a contract nor will the Government pay for any information provided; no basis for claim against the Government shall arise as a result from a response to this Sources Sought Notice or Government use of any information provided. Failure to submit information in sufficient detail may result in considering a company as not a viable source and may influence competition and set-aside decisions. Regardless of the information obtained from this Sources Sought Notice, the Government reserves the right to consider any arrangement as deemed appropriated for this requirement. Respondents are advised that the Government is under no obligation to acknowledge receipt of the information received or provide feedback to respondents with respect to any information submitted. No proprietary, classified, confidential, or sensitive information should be included in your response to this Sources Sought Notice. The Government reserves the right to use any information provided by respondents for any purpose deemed necessary and legally appropriate, including using technical information provided by respondents in any resultant solicitation. At this time no solicitation exists; therefore, Do Not Request a Copy of the Solicitation. After a review of the responses received, a pre-solicitation notice and solicitation may be published on Federal Business Opportunities (FedBizOpps) website. It is the potential offeror's responsibility to monitor FedBizOpps for release of any future solicitation that may result from this Sources Sought Notice. However, responses to this Sources Sought Notice will not be considered adequate responses to any resultant solicitation.