Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

Dump Body Construction & Installation

Active

State & Local

Response Deadline08/18/2026, 06:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract calls for the fabrication and installation of dump bodies constructed from 3/16-inch AR400 steel, designed to meet rigorous durability standards for heavy-duty use. Each unit must include a fully integrated vibrator system to prevent material buildup, a custom tailgate seal to ensure leak-free operation, and a hydraulic hoist capable of achieving a full 180-degree dumping angle for maximum efficiency and safety. The work involves both manufacturing the components to specified engineering requirements and on-site installation, ensuring seamless integration with existing vehicle platforms. The solicitation is issued as a subcontract under the Mississippi Department of Finance and Administration, with the North American Industry Classification System code 332439 indicating specialized metal fabrication. Responses are due by August 18, 2026, and the project is open to qualified subcontractors without a set-aside designation. Performance location details are not specified, but all work must comply with the technical and operational standards outlined in the contract. Interested parties may access the full solicitation through the provided state portal for additional specifications and submission guidelines.

General Info

Fabricate and install AR400 steel dump bodies with vibrator, tailgate seal, and 180-degree hydraulic hoist by August 18, 2026.

Agency

Mississippi → MPTAPView Agency

NAICS

332439 - Other Metal Container ManufacturingView NAICS

Place of Performance

MS, USA

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 24

subcontract

Response DeadlineAug 18

Submission deadline

Response Deadline

08/18/2026, 06:00:00 PM UTCin 23 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyMississippi → MPTAP

ContactsNo contacts available

OfficeN/A

Organization / Agency

Mississippi → MPTAP

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Fabrication and installation of dump bodies using 3/16” AR400 steel, including vibrator system, tailgate seal, and hydraulic hoist for 180-degree dumping.

Similar Contracts

Same NAICS industry code

Truck Customization and Attachment IntegrationThe contract involves the full installation, fabrication, and integration of loader and grapple attachments onto truck chassis, requiring significant hydraulic and structural modifications to ensure the vehicles are fully operational and field-ready upon delivery. The work demands precision engineering to align the attachments with the chassis integrity, maintain payload capacity, and ensure safe and reliable performance under operational conditions. All systems must be thoroughly tested and verified to meet rigorous field standards without the need for additional on-site adjustments. The contract is classified as a subcontract under NAICS code 332439, with a posting date of July 24, 2026, and a response deadline of August 13, 2026. It is managed by the Mississippi Department of Finance and Administration under the agency name MPTAP, with no specified place of performance or point of contact listed. The solicitation is accessible through a public portal, and interested parties must submit proposals prior to the deadline to be considered for award.

POSTED

DEADLINE

Supply of GSA Class 5 IPS ContainersThe contract calls for the supply of GSA-approved Class 5 Information Protection System containers designed to safeguard classified materials within secure environments, ensuring compliance with federal security standards for physical protection of sensitive information. This subcontract is designated as a Total Small Business Set-Aside under SBA rules, meaning only small businesses are eligible to compete, and it falls under NAICS code 332439, which corresponds to the manufacturing of metal lockers and safes. The solicitation was posted on July 24, 2026, with responses due by 5:00 PM EDT on July 30, 2026, and the award will be managed by the Naval Supply Systems Command Fleet Logistics Center Puget Sound under the Department of Defense. The containers must meet stringent GSA Class 5 specifications for intrusion resistance, fire resistance, and tamper protection to support secure storage of classified materials in military and defense operations.

Navsup Flt Logistics Ctr Puget Sound

POSTED

DEADLINE

81--SHIPPING AND STORAGThis contract, solicitation SPRPA126RVC05, issued by the Department of Defense through DLA Aviation at Philadelphia, pertains to the supply of shipping and storage containers governed by Drawing 838E001, Revision Latest, and referenced specifications including MIL-I-45208. The containers must be manufactured using rotational molding with polyethylene shell material and meet stringent quality and compliance requirements, including adherence to AWS welding standards for steel, aluminum, and stainless steel, and use of electrodeposited alkaline Zinc-Nickel Alloy finishes in place of cadmium plating. Each container must be affixed with a Unique Identification (UID) marking in data matrix format per MIL-STD-130, and a serial number formatted as “contract#_no_dashes-000X.” A First Article Test (FAT) is mandatory unless waived for previously approved suppliers who can demonstrate identical prior production within three years at the same facility using identical processes and without waivers or rejections. The contractor must submit one unit for FAT within 120 calendar days of contract award, and the government will conduct rigorous testing including dimensional inspection, initial and final leak tests at 0.25±0.05 PSIG, an 18-inch free-fall drop test, and form-and-fit verification using government-provided items. The cost of FAT testing, estimated at $12,000, is borne by the contractor, and any failure to comply may result in contract default. All testing components, including shipping and disposal, are the contractor’s responsibility, and rejected units must be corrected and resubmitted at the contractor’s expense. The contract imposes strict controls on materials and manufacturing processes: welding must follow specific filler alloys for aluminum (4043 or 5356/5556), and work stations must maintain clean, controlled environments to prevent contamination. Contaminants such as oils and waxes must be removed through approved cleaning methods, and chemical deoxidizing must occur no more than 10 days prior to welding (reduced to 3 days outdoors), followed immediately by mechanical cleaning using approved stainless steel tools to prevent galvanic corrosion. Desiccant in accordance with MIL-D-3464 must be included at one-third unit per cubic foot of interior volume, and packaging must comply with MIL-STD-2073. The contract mandates use of the Workflow Pro Mod Assist Module, requires adherence to Buy American provisions

Pa DLA Aviation At Philadelphia

POSTED

DEADLINE

81--SHIPPING AND STORAGThis contract encompasses the procurement of specialized shipping and storage containers under solicitation SPRPA126RVB95, issued by the Defense Logistics Agency Aviation at Philadelphia, with a closing date extended to August 27, 2026. The containers must be manufactured to exacting specifications outlined in Container Research Corporation drawing number 05259, revision latest, with aluminum shell material and strict adherence to AWS welding standards for aluminum, steel, and stainless steel. Critical requirements include compliance with MIL-STD-130 for Unique Identification (UID) marking in data matrix format, with each unit assigned a serial number following the format “contract#_no_dashes-000X”. Welding processes must be controlled, documented, and inspected with visual and potential non-destructive testing, while sealing crevices and applying electrodeposited zinc-nickel alloy finishes are mandatory. Materials and processes are tightly regulated, including deoxidizing procedures limited to 10 days prior to welding and prohibited use of certain cleaning agents. Quality assurance is rigorous, requiring a First Article Test (FAT) for new manufacturers, with one unit submitted for comprehensive testing within 120 calendar days of contract award. Testing includes dimensional checks, a 18-inch free-fall drop test, pneumatic leak detection (with pressure loss thresholds strictly defined), form and fit verification, and coating inspections. The contractor bears all costs related to FAT submission, shipping, and rework if disapproved, and must provide operating and maintenance instructions. Approved paint systems and coating thicknesses are mandated per federal and military standards, with restrictions on ozone-depleting substances. A waiver to FAT is available only to prior suppliers who can prove identical production under the same facility, processes, and within three years, and must submit dual pricing. All containers require desiccant, sealed joints, and nameplates with UID marks, with the Naval Inventory Control Point Philadelphia acting as the contact for serial number assignment and test scheduling. Packaging must conform to MIL-STD-2073, and the contract includes provisions for security, Buy American compliance, small business set-asides, and equal opportunity, reflecting a comprehensive framework for defense-critical supply chain integrity.

Pa DLA Aviation At Philadelphia

POSTED

DEADLINE

in about 1 month

81--SHIPPING AND STORAGThis contract solicits the manufacture of containers meeting strict technical and quality standards, with the primary item identified by drawing number 05259-657E001, Revision Latest, produced via rotomolding using plastic shell material. Each container must be uniquely identified with a UID marking in data matrix format per MIL-STD-130, with serial numbers following the format contract#_no_dashes-000X, and must include a nameplate with approved alphanumeric serial numbering obtained from NAVICP. A First Article Test is mandatory unless waived under specific conditions for prior approved suppliers who meet stringent criteria including identical production location, processes, and no prior rejections or deviations. The First Article submission requires one unit delivered within 120 days of contract award to a government-designated test site, with comprehensive testing including dimensional verification, 18-inch free-fall drop testing, and pneumatic leak tests under defined pressure parameters, where any pressure loss over 0.05 psi or deformation exceeding three-quarters of an inch results in disapproval. The contractor bears all costs related to First Article testing, including shipping, repairs, and additional submissions if failed, and must certify that production occurs at the same facility as the First Article. Compliance with ASTM B 841 for zinc-nickel plating, AWS D1.2 for welding, and MIL-C-5541 for cleaning is required, along with one-third unit of desiccant per cubic foot of internal volume. The contract mandates 100% production leak testing using Method 5009 of Federal Test Method Standard 101C, with a threshold pressure loss of 0.025 PSIG after temperature and barometric adjustments. All tooling and manufacturing aids are the contractor’s responsibility, and no Government-furnished equipment applies. Packaging must follow MIL-STD-2073. The closing date for submissions has been extended to August 31, 2026. The solicitation includes multiple regulatory clauses such as Buy American, Equal Opportunity, Security Prohibitions, and Mandatory Use of Workflow Pro, and enforces strict liability limitations and compliance with National Defense priority ratings. Offers must clearly state whether they are submitted with or without waiver of First Article requirements, and failure to comply may result in contract default.

Pa DLA Aviation At Philadelphia

POSTED

DEADLINE

in about 1 month

81--SHIPPING AND STORAGThe contract pertains to the procurement of containers manufactured to stringent military specifications, with primary reference to Container Research Corporation drawing number 05259, 530E001-501, latest revision, and associated technical requirements. The container shell is to be made of aluminum, with all manufacturing, testing, and inspection strictly adhering to the referenced drawings, specifications, and contract clauses. Key prohibitions include the use of MIL-W-81381 wire, which must be replaced with SAE-AS22759, and cadmium plating, which is replaced with electrodeposited alkaline Zinc-Nickel Alloy per ASTM B841. Welding must comply with AWS standards for the respective metals, with specific filler materials required for aluminum alloys, and all welds must undergo visual inspection with 5x magnification where necessary, with potential additional non-destructive testing such as dye penetrant as directed by the government. Strict cleaning and deoxidizing procedures must be followed prior to welding, including chemical treatments with approved acids and mechanical cleaning methods that avoid iron-based abrasives to prevent corrosion. Each container must be marked with a Unique Identification (UID) in data matrix format on a nameplate, per MIL-STD-130, and assigned a sequential serial number starting from 0001. A First Article Test (FAT) is mandatory for new manufacturers, requiring submission of one unit for comprehensive testing at a designated government facility in Colts Neck, NJ, within 60 calendar days of contract award. FAT includes dimensional checks, leak testing under 1.00 ± 0.05 psig pressure for 30 minutes, an 18-inch free fall drop test on concrete, form and fit verification with government-supplied components, and final leak retest. The contractor bears all costs related to FAT preparation, shipping, and retesting if disapproved. Approved FAT samples may be counted toward contract quantity if undamaged, but unapproved samples are destroyed. For experienced suppliers, a waiver of FAT may be considered if identical units were produced within the last three years at the same facility without deviations or rejections, provided certification is submitted. All production units must undergo 100% drop testing under the same conditions as FAT. Packaging must comply with MIL-STD-2073, and the contract includes multiple mandatory clauses related to Buy American standards, security exclusions, equal opportunity, warranty limitations, and adherence to the latest

Pa DLA Aviation At Philadelphia

POSTED

DEADLINE

81--SHIPPING AND STORAGThis contract, issued by the Defense Logistics Agency Aviation at Philadelphia, solicits the manufacturing of a plastic container shell using vacuum forming, governed by Naval Air Systems Command drawing 3321AS600 Revision LATEST and associated sub-drawings. The item is a multi-application container requiring strict adherence to quality and production standards, including compliance with AWS welding specifications for steel, aluminum, and stainless steel, and adherence to deoxidizing, cleaning, and material control procedures outlined in MIL-C-5541 and ASTM standards. All units must be marked with a Unique Identification (UID) in data matrix format per MIL-STD-130, and each container must include one-third a unit of desiccant per cubic foot of interior volume. Engineering source approval is mandatory for new manufacturers, and only approved shock mounts may be used, with HA KING SHOCK MOUNT (13008) 7900 listed as an authorized alternative. The contract prohibits chromate conversion coatings containing hexavalent chromium due to RoHS compliance, and the waterproof test per ASTM-D-951 has been deleted, replaced by visual inspection of closures and rivets. A First Article Test (FAT) is required for new suppliers, with one unit to be delivered within 120 calendar days for extensive dimensional, functional, and environmental testing including four 18-inch free-fall drops, initial and final leak tests at 1.00 ± 0.05 psig, and form-fit validation. The contractor bears all costs related to FAT shipment, testing, and rework if disapproved, and any additional submissions must meet government-specified deadlines. Approved First Article units may be counted toward contract delivery if undamaged and not destroyed during testing. Production inspections require sampling of at least one unit per lot, subject to drop and waterproof tests witnessed by government representatives, with rework permitted only once per defective unit. The contract mandates compliance with Buy American and small business set-aside provisions, along with security restrictions and mandatory use of Workflow Pro. Performance is set to conclude by August 31, 2026, and all communications, including drawing requests and UID number assignments, must be directed to the buyer at the designated email address. All tooling, fixtures, and test equipment are the contractor’s sole responsibility unless otherwise specified.

Pa DLA Aviation At Philadelphia

POSTED

DEADLINE

in about 1 month

81--SHIPPING AND STORAGThis contract, solicitation SPRPA126RVC19, issued by the Department of Defense through the Defense Logistics Agency Aviation office in Philadelphia, pertains to the procurement of shipping and storage containers governed by Container Research Corp drawing number 05259-934E001, with the latest revision. The contract mandates strict compliance with technical specifications including aluminum construction, electrodeposited alkaline Zinc-Nickel Alloy finish per ASTM B841, and welding standards per AWS D1.1, D1.2, D1.3, and D1.6 depending on material, with specific filler metals required for 6061 and 5000 series aluminum alloys. Each container must bear a Unique Identification (UID) in data matrix format on a nameplate, following MIL-STD-130, and be assigned a serial number in the format contract#_no_dashes-000X. A First Article Test (FAT) is required unless waived for qualified prior suppliers, with strict submission deadlines, test procedures including air pressure leak tests, 18-inch drop tests, and form and fit evaluations, all at the contractor’s expense. The contractor must provide test samples unpainted with light preservative, ensure welding and cleaning processes adhere to precise chemical deoxidizing and mechanical cleaning protocols, and seal crevices with MIL-S-81733 sealant. Each unit must contain one-third cubic foot of desiccant per interior volume, and all welding and process controls must be documented and visible at workstations. The Government will conduct FAT testing with an estimated cost of $20,000, and samples will not be returned unless refurbishment is possible and approved. Only the specified shock mount is approved, and substitutions are prohibited without written authorization. The contract includes Buy American, security, small business set-aside, and quality assurance clauses, and the offer deadline is September 9, 2026. Engineering source approval is mandatory for new manufacturers, and all drawing requests must be directed to the designated buyer.

Pa DLA Aviation At Philadelphia

POSTED

DEADLINE

in about 2 months

20’ x 8’ 6” Type 1 New Oxygen Filling and Cleaning ContainerDLA Troop Support is conducting market research to identify qualified sources capable of manufacturing a 20’ x 8’ 6” Type 1 New Oxygen Filling and Cleaning Container with part number SB861.6 NQ, originally produced by Sea Box, Inc with CAGE code 0FXA9. This is not a solicitation for quotes but a sources sought notice aimed at gathering technical capabilities from potential manufacturers. Respondents must submit a complete technical data package that includes the original manufacturer’s proprietary drawings for comparison, as the Government does not possess these drawings and they remain the exclusive property of the original manufacturer. The annual estimated quantity is five units, and the national stock number remains unassigned. Submissions are required by August 24, 2026, and interested parties must contact Avril Dickerson prior to the deadline. The Government is under no obligation to award a contract based on responses, nor will it compensate respondents for information submitted. The North American Industry Classification System code for this requirement is 332439.

DLA Troop Support

POSTED

DEADLINE

81--SHIPPING AND STORAGThis contract, issued under solicitation number SPRPA126RVC07 by the Department of Defense through DLA Aviation at Philadelphia, extends through August 31, 2026, to promote competition for the supply of rotating molded polyethylene containers conforming to Drawing No. 861E001 Revision Latest, as controlled by Container Research Corporation. The item must be manufactured using rotational molding with specific material and finish requirements, including replacement of cadmium plating with electrodeposited alkaline Zinc-Nickel Alloy per ASTM B841. Each container requires a Unique Identification (UID) marking in data matrix format on a nameplate, following MIL-STD-130, with a serial number formatted as contract#_no_dashes-000X. A mandatory First Article Test (FAT) is required for new suppliers, involving dimensional, functional, fit, and leak tests under Federal Test Method Standard 101C, including a 18-inch drop test and pressure retention evaluation, with failure thresholds strictly defined. The contractor is responsible for all FAT sample submission, testing costs, repair, and disposal, with the government estimating $12,000 in testing expenses to be factored into offers. Existing qualified suppliers may request a waiver of the FAT requirement if they can prove identical prior production within the last three years from the same facility without deviations or rejections. Packaging must comply with MIL-STD-2073, and each container must include one-third unit of desiccant per cubic foot of internal volume. All manufacturing must occur in a single facility, and production cannot initiate before FAT approval, with associated costs borne solely by the contractor. The contract enforces Buy American provisions, security exclusions, integrity of unit pricing, and mandatory compliance with WFP Mod Assist and other federal mandates. Communication regarding drawings, UID numbering, FAT arrangements, and nameplate details must be directed exclusively to the designated buyer point of contact via email.

Pa DLA Aviation At Philadelphia

POSTED

DEADLINE

in about 1 month

81--NRP,SHIPPING AND STThis contract, identified by solicitation number SPRPA126RVC02 and issued by the Department of Defense’s DLA Aviation at Philadelphia, pertains to the procurement of plastic containers manufactured via rotomolding to drawing number 05259-829E001, revision latest, with strict compliance to military and technical specifications. Each container must be equipped with a Unique Identification (UID) marking in data matrix format as mandated by MIL-STD-130, and affixed with a nameplate containing a contract-specific serial number format. The contract requires adherence to stringent quality controls, including a First Article Test (FAT) with mandatory submission of one unit within 120 calendar days for dimensional, functional, and leak integrity testing, though waivers may be considered for prior approved suppliers who meet specific criteria such as identical production history within the past three years and use of the same facility and processes. All containers undergo 100% production leak testing using pneumatic pressure methods per Federal Test Method Standard 101C, with rejection thresholds for pressure loss and shell deformation, as well as an 18-inch drop test to verify structural integrity. The use of electrodeposited alkaline Zinc-Nickel Alloy finish replaces cadmium plating, and each unit must include one third of a cubic foot of non-dusting desiccant per interior volume. The contractor is solely responsible for procuring all tooling, testing equipment, and shipping costs for FAT samples, none of which will be returned unless approved and refurbished; destroyed samples are irrecoverable. The contract includes mandatory compliance with Buy American provisions, security exclusions, small business set-asides, and prohibitions against unauthorized use of restricted technologies. Payment and invoicing follow Wide Area Workflow instructions, with delivery and shipping coordinated through designated Navy contacts. The solicitation closes on August 31, 2026, and includes a clause allowing contract extension to promote competition. Engineering source approval is required for new manufacturers, and all inquiries regarding drawings, UID numbering, or FAT coordination must be directed exclusively to the designated buyer email provided on the contract’s first page.

Pa DLA Aviation At Philadelphia

POSTED

DEADLINE

in about 1 month

81--SHIPPING AND STORAGThis contract, solicitation SPRPA126RVB92, issued by the Defense Logistics Agency Aviation at Philadelphia, seeks suppliers for a specialized shipping and storage container conforming to drawing number 05259, 828E001, latest revision, with an aluminum shell. The item requires strict adherence to military and industry standards including AWS D1.2 for aluminum welding, ASTM B 841 for Zinc-Nickel alloy finish replacing cadmium, and MIL-STD-130 for Unique Identification (UID) marking in data matrix format on a nameplate. The UID serial number must follow the format “contract#_no_dashes-000X” and is to be obtained from the buyer. All containers must include one third of a unit of MIL-D-3464 Type II desiccant per cubic foot of internal volume and sealed at crevices using MIL-S-81733 sealing compound. Welding procedures, material controls, and pre-weld cleaning require rigorous documentation, with deoxidizing limited to ten days prior to welding and mechanical cleaning immediately before welding using approved non-iron abrasives. A First Article Test (FAT) is mandatory unless waived for previous approved suppliers who meet strict criteria, including identical production within the last three years at the same facility without deviations or rejections. The contractor must submit one unit for FAT within 120 calendar days of contract award to a government-specified location, bearing explicit labeling and shipping documentation. The government will perform dimensional, functional, and leak testing, including a free-fall drop test from 18 inches and a 30-minute pressure retention test requiring no more than 0.05 PSIG loss. All FAT costs, including shipping, are borne by the contractor, and samples are typically destroyed during testing. Packaging must follow MIL-STD-2073, and the container must be unpainted with only a light preservative on corrosive areas. The solicitation closes August 24, 2026, and includes mandatory clauses on Buy American, small business set-aside, security prohibitions, workflow compliance, and integrity of unit pricing, with an estimated $10,000 government testing cost factored into bids.

Pa DLA Aviation At Philadelphia

POSTED

DEADLINE

More opportunities from Mississippi → MPTAP

Same awarding agency

Hauling and Earthmoving ServicesThe contract titled Hauling and Earthmoving Services pertains to excavation, grading, and hauling of earth materials for bridge approaches and site preparation, with a NAICS code of 238910 indicating it falls under other heavy and civil engineering construction. This is a subcontract opportunity posted on July 24, 2026, with a response deadline of September 8, 2026, and is managed by the Mississippi Department of Transportation through the MPTAP agency. The work will be performed at unspecified locations within Mississippi, as no detailed place of performance or office address has been provided. There is no set-aside designation or solicitation number listed, and the point of contact information is unavailable. Interested parties must submit responses before the deadline to be considered for award.

Site Preparation Contractors

POSTED

DEADLINE

in about 1 month

Surveying and Layout ServicesThe contract seeks qualified contractors to provide comprehensive surveying and layout services for a bridge construction project, including site surveying, precise staking, and grading control to ensure accurate alignment of the bridge structure and correct placement of piles. The work requires technical expertise in geospatial data collection and execution to meet engineering specifications for infrastructure development, with all activities centered on ensuring structural integrity and compliance with design plans. The opportunity is posted as a subcontract under NAICS code 541370, with a response deadline of September 8, 2026, and is managed by the Mississippi Department of Finance and Administration through the MPTAP agency. The contract remains open for qualified vendors to submit proposals, though the specific location of performance and point of contact details are not provided in the available data. Interested parties must reference the official posting on the Mississippi state website to access full solicitation details and submission requirements.

Surveying and Mapping (except Geophysical) Services

POSTED

DEADLINE

in about 1 month

Traffic Control and SignageThe contract entails the setup and management of temporary traffic control systems, including signage and flagging operations, required during construction activities. It is classified as a subcontract under NAICS code 561990 and is issued by the Mississippi Department of Transportation through the MPTAP program, with the response deadline set for September 8, 2026. Work will be performed across various locations within Mississippi as needed by construction projects, and all services must comply with state and federal standards for traffic control safety and efficiency. Proposals must be submitted by the deadline, and successful contractors will be responsible for deploying, maintaining, and removing all temporary traffic control measures to ensure public safety and minimal disruption during roadway work.

All Other Support Services

POSTED

DEADLINE

in about 1 month

Erosion and Sediment ControlThe contract pertains to the installation and ongoing maintenance of erosion and sediment control measures, including silt fences and sediment basins, aimed at preventing soil displacement and water contamination during construction or land-disturbing activities. It is structured as a subcontract under the NAICS code 561730, which classifies it within environmental remediation and related services, and is administered by the Mississippi Department of Finance and Administration through its MPTAP division. The solicitation was posted on July 24, 2026, with a response deadline of September 8, 2026, providing interested parties approximately six weeks to submit proposals. While the specific location of performance is not detailed in the provided data, the work is expected to occur within the state of Mississippi. There is no set-aside designation indicated, meaning the contract is open to all qualifying subcontractors without preference based on business size or demographic categories. All technical execution, compliance, and maintenance responsibilities associated with the erosion controls fall under the subcontractor’s scope, with performance likely tied to state environmental regulations and standards.

Landscaping Services

POSTED

DEADLINE

in about 1 month

Reinforcing Steel (Rebar) Supply and InstallationThe contract involves the supply, fabrication, and installation of reinforcing steel for concrete piling, deck, and structural components under a subcontract arrangement. The work is associated with the Mississippi Department of Transportation or related infrastructure initiative under the agency name MPTAP, and the North American Industry Classification System code 332312 indicates the specific focus on structural metal fabrication. The solicitation was posted on July 24, 2026, with a response deadline of September 8, 2026, indicating a seven-week window for interested parties to submit proposals. The place of performance and detailed location information have not been specified, suggesting the work may span multiple sites within Mississippi, and all performance must align with the technical and logistical requirements for reinforcing steel in heavy civil construction. No set-aside provisions or special qualifications are indicated, making it open to eligible subcontractors with proven capacity in rebar handling, fabrication, and site installation.

Fabricated Structural Metal Manufacturing

POSTED

DEADLINE

in about 1 month

Bridge Deck and Approach Slab ConstructionThe contract pertains to the formation, reinforcement, and pouring of concrete for bridge deck and approach slabs, strictly adhering to state specifications. The work scope requires precise execution of concrete placement and structural reinforcement in alignment with regulatory standards to ensure durability and safety of the infrastructure components. This subcontract is part of a larger transportation or civil engineering project managed by the Mississippi Department of Finance and Administration, with performance expected within the state’s jurisdiction. Solicitation details indicate a submission deadline of September 8, 2026, with the opportunity posted on July 24, 2026. The North American Industry Classification System code 238110 identifies the work as concrete work for construction. Although no specific location, contact information, or set-aside provisions are provided, the project is accessible through the Mississippi government’s official contract bidding portal, and interested parties must comply with all state-level construction codes and contractual requirements. No bidding restrictions based on business size or category are indicated.

Poured Concrete Foundation and Structure Contractors

POSTED

DEADLINE

in about 1 month

Granular Material Supply and PlacementThe contract entails the supply and placement of 684 cubic yards of granular material designated for sub-base and backfill uses, with the work falling under NAICS code 327320 for crushed and broken stone manufacturing. This subcontract is issued by the Mississippi Department of Transportation through the MPTAP agency and is open for bids with a response deadline of September 8, 2026. The material must meet specified engineering standards appropriate for foundational and fill applications, ensuring structural integrity and long-term performance in transportation infrastructure projects. While the precise location of performance is not detailed in the provided data, the project is administratively tied to Mississippi and will likely serve state-funded road or civil works. Interested parties must submit proposals by the stated deadline, with all terms, quality controls, and delivery requirements expected to be defined in the full solicitation documents accessible via the provided link.

Ready-Mix Concrete Manufacturing

POSTED

DEADLINE

in about 1 month

Prestressed Concrete Piling InstallationThe contract awards the supply and installation of 920 linear feet of 14-inch prestressed concrete piling for bridge foundation work under a subcontract arrangement. The work is associated with infrastructure development managed by the Mississippi Department of Transportation through its MPTAP division, with performance expected to take place within the state. The solicitation was posted on July 24, 2026, and responses must be submitted by September 8, 2026, with no set-aside provisions specified. The North American Industry Classification System code 238990 indicates the scope falls under other specialty trade contractors, aligning with specialized foundation and piling services. No point of contact or specific geographic location beyond the state is provided, and the contract details are accessible via the Mississippi state bidding portal.

All Other Specialty Trade Contractors

POSTED

DEADLINE

in about 1 month

Deep Cleaning and Sanitization ServicesThe contract entails deep cleaning and sanitization services for vacant units, covering all essential areas including floors, bathrooms, kitchens, windows, and carpets, with specific attention to dusting, odor removal, and thorough sanitization to ensure readiness for occupancy. The scope demands meticulous attention to detail across all cleaning tasks to meet high standards of hygiene and presentation. The solicitation is identified under NAICS code 561720 and is classified as a subcontract issued by the Mississippi Department of Finance and Administration through MPTAP. The posting date is July 24, 2026, with a response deadline of August 19, 2026, both set at 6:00 PM. All work is to be performed at locations managed by the agency, though specific cities or addresses are not provided. The opportunity is open for bidding with no designated set-aside classification, and interested parties must submit responses via the official state portal before the deadline.

Janitorial Services

POSTED

DEADLINE

HVAC System Maintenance and ServicingThe contract involves inspecting, cleaning, repairing, and maintaining residential HVAC systems in vacant housing units to ensure they remain operational and energy efficient. The work is critical to preserving the condition of properties ahead of occupancy, with a focus on reliability, performance, and compliance with efficiency standards. Contractors are expected to handle all aspects of HVAC service including diagnostic testing, component replacement, airflow optimization, and preventive maintenance to minimize future failures. This subcontract is issued under NAICS code 238220 for HVAC installation and repair, managed by the Mississippi Department of Finance and Administration through its MPTAP program. The solicitation was posted on July 24, 2026, with responses due by August 19, 2026. Performance is required across residential units within Mississippi, though specific locations are not detailed. The contract does not include a set-aside designation and no point of contact is provided, with all necessary information accessible through the public bid portal linked in the posting.

Plumbing, Heating, and Air-Conditioning Contractors

POSTED

DEADLINE

Plumbing Systems Repair and MaintenanceThe contract titled Plumbing Systems Repair and Maintenance requires comprehensive inspection, repair, and maintenance of commercial and residential plumbing systems including faucets, drains, toilets, water heaters, and supply lines. Work involves identifying and resolving leaks, clearing clogs, and replacing fixtures to ensure full functionality and compliance with safety and efficiency standards. The scope of work encompasses both preventive maintenance and emergency repairs to keep plumbing infrastructure operating reliably. This is a subcontract under NAICS code 238220, issued by the Mississippi agency MPTAP, with a response deadline of August 19, 2026. The solicitation was posted on July 24, 2026, and bidders must submit their proposals prior to the deadline. The place of performance and specific location details are not specified, indicating that work may be performed across various sites within Mississippi under the agency’s purview. Participation eligibility and set-aside status are not indicated, and interested parties should verify all requirements through the provided web link before submitting a bid.

Plumbing, Heating, and Air-Conditioning Contractors

POSTED

DEADLINE

Electrical Systems Inspection and MaintenanceThe contract requires qualified personnel to inspect, repair, and maintain all electrical systems within vacant units, focusing on outlets, switches, lighting fixtures, circuit breakers, and GFCI compliance to ensure adherence to local electrical codes. All work must be performed with precision and in full compliance with applicable regulations, ensuring safety and functionality of electrical infrastructure in unoccupied properties. The opportunity is advertised as a subcontract under NAICS code 238210, with a response deadline of August 19, 2026, and was posted on July 24, 2026. The contracting agency is MPTAP under the Mississippi Department of Finance and Administration, though specific location details for performance or contact points are not provided. Interested parties should consult the official UI link for additional submission requirements and procedural guidelines.

Electrical Contractors and Other Wiring Installation Contractors

POSTED

DEADLINE