Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

Truck Customization and Attachment Integration

Active

State & Local

Response Deadline08/13/2026, 06:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract involves the full installation, fabrication, and integration of loader and grapple attachments onto truck chassis, requiring significant hydraulic and structural modifications to ensure the vehicles are fully operational and field-ready upon delivery. The work demands precision engineering to align the attachments with the chassis integrity, maintain payload capacity, and ensure safe and reliable performance under operational conditions. All systems must be thoroughly tested and verified to meet rigorous field standards without the need for additional on-site adjustments. The contract is classified as a subcontract under NAICS code 332439, with a posting date of July 24, 2026, and a response deadline of August 13, 2026. It is managed by the Mississippi Department of Finance and Administration under the agency name MPTAP, with no specified place of performance or point of contact listed. The solicitation is accessible through a public portal, and interested parties must submit proposals prior to the deadline to be considered for award.

General Info

Install and integrate loader and grapple attachments on truck chassis with hydraulic and structural modifications.

Agency

Mississippi → MPTAPView Agency

NAICS

332439 - Other Metal Container ManufacturingView NAICS

Place of Performance

MS, USA

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 24

subcontract

Response DeadlineAug 13

Submission deadline

Response Deadline

08/13/2026, 06:00:00 PM UTCin 18 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyMississippi → MPTAP

ContactsNo contacts available

OfficeN/A

Organization / Agency

Mississippi → MPTAP

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Install, fabricate, and integrate loader and grapple attachments onto truck chassis, including hydraulic and structural modifications to ensure field-ready performance.

Similar Contracts

Same NAICS industry code

Dump Body Construction & InstallationThe contract calls for the fabrication and installation of dump bodies constructed from 3/16-inch AR400 steel, designed to meet rigorous durability standards for heavy-duty use. Each unit must include a fully integrated vibrator system to prevent material buildup, a custom tailgate seal to ensure leak-free operation, and a hydraulic hoist capable of achieving a full 180-degree dumping angle for maximum efficiency and safety. The work involves both manufacturing the components to specified engineering requirements and on-site installation, ensuring seamless integration with existing vehicle platforms. The solicitation is issued as a subcontract under the Mississippi Department of Finance and Administration, with the North American Industry Classification System code 332439 indicating specialized metal fabrication. Responses are due by August 18, 2026, and the project is open to qualified subcontractors without a set-aside designation. Performance location details are not specified, but all work must comply with the technical and operational standards outlined in the contract. Interested parties may access the full solicitation through the provided state portal for additional specifications and submission guidelines.

POSTED

DEADLINE

Supply of GSA Class 5 IPS ContainersThe contract calls for the supply of GSA-approved Class 5 Information Protection System containers designed to safeguard classified materials within secure environments, ensuring compliance with federal security standards for physical protection of sensitive information. This subcontract is designated as a Total Small Business Set-Aside under SBA rules, meaning only small businesses are eligible to compete, and it falls under NAICS code 332439, which corresponds to the manufacturing of metal lockers and safes. The solicitation was posted on July 24, 2026, with responses due by 5:00 PM EDT on July 30, 2026, and the award will be managed by the Naval Supply Systems Command Fleet Logistics Center Puget Sound under the Department of Defense. The containers must meet stringent GSA Class 5 specifications for intrusion resistance, fire resistance, and tamper protection to support secure storage of classified materials in military and defense operations.

Navsup Flt Logistics Ctr Puget Sound

POSTED

DEADLINE

81--SHIPPING AND STORAGThis contract, solicitation SPRPA126RVC05, issued by the Department of Defense through DLA Aviation at Philadelphia, pertains to the supply of shipping and storage containers governed by Drawing 838E001, Revision Latest, and referenced specifications including MIL-I-45208. The containers must be manufactured using rotational molding with polyethylene shell material and meet stringent quality and compliance requirements, including adherence to AWS welding standards for steel, aluminum, and stainless steel, and use of electrodeposited alkaline Zinc-Nickel Alloy finishes in place of cadmium plating. Each container must be affixed with a Unique Identification (UID) marking in data matrix format per MIL-STD-130, and a serial number formatted as “contract#_no_dashes-000X.” A First Article Test (FAT) is mandatory unless waived for previously approved suppliers who can demonstrate identical prior production within three years at the same facility using identical processes and without waivers or rejections. The contractor must submit one unit for FAT within 120 calendar days of contract award, and the government will conduct rigorous testing including dimensional inspection, initial and final leak tests at 0.25±0.05 PSIG, an 18-inch free-fall drop test, and form-and-fit verification using government-provided items. The cost of FAT testing, estimated at $12,000, is borne by the contractor, and any failure to comply may result in contract default. All testing components, including shipping and disposal, are the contractor’s responsibility, and rejected units must be corrected and resubmitted at the contractor’s expense. The contract imposes strict controls on materials and manufacturing processes: welding must follow specific filler alloys for aluminum (4043 or 5356/5556), and work stations must maintain clean, controlled environments to prevent contamination. Contaminants such as oils and waxes must be removed through approved cleaning methods, and chemical deoxidizing must occur no more than 10 days prior to welding (reduced to 3 days outdoors), followed immediately by mechanical cleaning using approved stainless steel tools to prevent galvanic corrosion. Desiccant in accordance with MIL-D-3464 must be included at one-third unit per cubic foot of interior volume, and packaging must comply with MIL-STD-2073. The contract mandates use of the Workflow Pro Mod Assist Module, requires adherence to Buy American provisions

Pa DLA Aviation At Philadelphia

POSTED

DEADLINE

81--SHIPPING AND STORAGThis contract encompasses the procurement of specialized shipping and storage containers under solicitation SPRPA126RVB95, issued by the Defense Logistics Agency Aviation at Philadelphia, with a closing date extended to August 27, 2026. The containers must be manufactured to exacting specifications outlined in Container Research Corporation drawing number 05259, revision latest, with aluminum shell material and strict adherence to AWS welding standards for aluminum, steel, and stainless steel. Critical requirements include compliance with MIL-STD-130 for Unique Identification (UID) marking in data matrix format, with each unit assigned a serial number following the format “contract#_no_dashes-000X”. Welding processes must be controlled, documented, and inspected with visual and potential non-destructive testing, while sealing crevices and applying electrodeposited zinc-nickel alloy finishes are mandatory. Materials and processes are tightly regulated, including deoxidizing procedures limited to 10 days prior to welding and prohibited use of certain cleaning agents. Quality assurance is rigorous, requiring a First Article Test (FAT) for new manufacturers, with one unit submitted for comprehensive testing within 120 calendar days of contract award. Testing includes dimensional checks, a 18-inch free-fall drop test, pneumatic leak detection (with pressure loss thresholds strictly defined), form and fit verification, and coating inspections. The contractor bears all costs related to FAT submission, shipping, and rework if disapproved, and must provide operating and maintenance instructions. Approved paint systems and coating thicknesses are mandated per federal and military standards, with restrictions on ozone-depleting substances. A waiver to FAT is available only to prior suppliers who can prove identical production under the same facility, processes, and within three years, and must submit dual pricing. All containers require desiccant, sealed joints, and nameplates with UID marks, with the Naval Inventory Control Point Philadelphia acting as the contact for serial number assignment and test scheduling. Packaging must conform to MIL-STD-2073, and the contract includes provisions for security, Buy American compliance, small business set-asides, and equal opportunity, reflecting a comprehensive framework for defense-critical supply chain integrity.

Pa DLA Aviation At Philadelphia

POSTED

DEADLINE

in about 1 month

81--SHIPPING AND STORAGThis contract solicits the manufacture of containers meeting strict technical and quality standards, with the primary item identified by drawing number 05259-657E001, Revision Latest, produced via rotomolding using plastic shell material. Each container must be uniquely identified with a UID marking in data matrix format per MIL-STD-130, with serial numbers following the format contract#_no_dashes-000X, and must include a nameplate with approved alphanumeric serial numbering obtained from NAVICP. A First Article Test is mandatory unless waived under specific conditions for prior approved suppliers who meet stringent criteria including identical production location, processes, and no prior rejections or deviations. The First Article submission requires one unit delivered within 120 days of contract award to a government-designated test site, with comprehensive testing including dimensional verification, 18-inch free-fall drop testing, and pneumatic leak tests under defined pressure parameters, where any pressure loss over 0.05 psi or deformation exceeding three-quarters of an inch results in disapproval. The contractor bears all costs related to First Article testing, including shipping, repairs, and additional submissions if failed, and must certify that production occurs at the same facility as the First Article. Compliance with ASTM B 841 for zinc-nickel plating, AWS D1.2 for welding, and MIL-C-5541 for cleaning is required, along with one-third unit of desiccant per cubic foot of internal volume. The contract mandates 100% production leak testing using Method 5009 of Federal Test Method Standard 101C, with a threshold pressure loss of 0.025 PSIG after temperature and barometric adjustments. All tooling and manufacturing aids are the contractor’s responsibility, and no Government-furnished equipment applies. Packaging must follow MIL-STD-2073. The closing date for submissions has been extended to August 31, 2026. The solicitation includes multiple regulatory clauses such as Buy American, Equal Opportunity, Security Prohibitions, and Mandatory Use of Workflow Pro, and enforces strict liability limitations and compliance with National Defense priority ratings. Offers must clearly state whether they are submitted with or without waiver of First Article requirements, and failure to comply may result in contract default.

Pa DLA Aviation At Philadelphia

POSTED

DEADLINE

in about 1 month

81--SHIPPING AND STORAGThe contract pertains to the procurement of containers manufactured to stringent military specifications, with primary reference to Container Research Corporation drawing number 05259, 530E001-501, latest revision, and associated technical requirements. The container shell is to be made of aluminum, with all manufacturing, testing, and inspection strictly adhering to the referenced drawings, specifications, and contract clauses. Key prohibitions include the use of MIL-W-81381 wire, which must be replaced with SAE-AS22759, and cadmium plating, which is replaced with electrodeposited alkaline Zinc-Nickel Alloy per ASTM B841. Welding must comply with AWS standards for the respective metals, with specific filler materials required for aluminum alloys, and all welds must undergo visual inspection with 5x magnification where necessary, with potential additional non-destructive testing such as dye penetrant as directed by the government. Strict cleaning and deoxidizing procedures must be followed prior to welding, including chemical treatments with approved acids and mechanical cleaning methods that avoid iron-based abrasives to prevent corrosion. Each container must be marked with a Unique Identification (UID) in data matrix format on a nameplate, per MIL-STD-130, and assigned a sequential serial number starting from 0001. A First Article Test (FAT) is mandatory for new manufacturers, requiring submission of one unit for comprehensive testing at a designated government facility in Colts Neck, NJ, within 60 calendar days of contract award. FAT includes dimensional checks, leak testing under 1.00 ± 0.05 psig pressure for 30 minutes, an 18-inch free fall drop test on concrete, form and fit verification with government-supplied components, and final leak retest. The contractor bears all costs related to FAT preparation, shipping, and retesting if disapproved. Approved FAT samples may be counted toward contract quantity if undamaged, but unapproved samples are destroyed. For experienced suppliers, a waiver of FAT may be considered if identical units were produced within the last three years at the same facility without deviations or rejections, provided certification is submitted. All production units must undergo 100% drop testing under the same conditions as FAT. Packaging must comply with MIL-STD-2073, and the contract includes multiple mandatory clauses related to Buy American standards, security exclusions, equal opportunity, warranty limitations, and adherence to the latest

Pa DLA Aviation At Philadelphia

POSTED

DEADLINE

81--SHIPPING AND STORAGThis contract, issued by the Defense Logistics Agency Aviation at Philadelphia, solicits the manufacturing of a plastic container shell using vacuum forming, governed by Naval Air Systems Command drawing 3321AS600 Revision LATEST and associated sub-drawings. The item is a multi-application container requiring strict adherence to quality and production standards, including compliance with AWS welding specifications for steel, aluminum, and stainless steel, and adherence to deoxidizing, cleaning, and material control procedures outlined in MIL-C-5541 and ASTM standards. All units must be marked with a Unique Identification (UID) in data matrix format per MIL-STD-130, and each container must include one-third a unit of desiccant per cubic foot of interior volume. Engineering source approval is mandatory for new manufacturers, and only approved shock mounts may be used, with HA KING SHOCK MOUNT (13008) 7900 listed as an authorized alternative. The contract prohibits chromate conversion coatings containing hexavalent chromium due to RoHS compliance, and the waterproof test per ASTM-D-951 has been deleted, replaced by visual inspection of closures and rivets. A First Article Test (FAT) is required for new suppliers, with one unit to be delivered within 120 calendar days for extensive dimensional, functional, and environmental testing including four 18-inch free-fall drops, initial and final leak tests at 1.00 ± 0.05 psig, and form-fit validation. The contractor bears all costs related to FAT shipment, testing, and rework if disapproved, and any additional submissions must meet government-specified deadlines. Approved First Article units may be counted toward contract delivery if undamaged and not destroyed during testing. Production inspections require sampling of at least one unit per lot, subject to drop and waterproof tests witnessed by government representatives, with rework permitted only once per defective unit. The contract mandates compliance with Buy American and small business set-aside provisions, along with security restrictions and mandatory use of Workflow Pro. Performance is set to conclude by August 31, 2026, and all communications, including drawing requests and UID number assignments, must be directed to the buyer at the designated email address. All tooling, fixtures, and test equipment are the contractor’s sole responsibility unless otherwise specified.

Pa DLA Aviation At Philadelphia

POSTED

DEADLINE

in about 1 month

81--SHIPPING AND STORAGThis contract, solicitation SPRPA126RVC19, issued by the Department of Defense through the Defense Logistics Agency Aviation office in Philadelphia, pertains to the procurement of shipping and storage containers governed by Container Research Corp drawing number 05259-934E001, with the latest revision. The contract mandates strict compliance with technical specifications including aluminum construction, electrodeposited alkaline Zinc-Nickel Alloy finish per ASTM B841, and welding standards per AWS D1.1, D1.2, D1.3, and D1.6 depending on material, with specific filler metals required for 6061 and 5000 series aluminum alloys. Each container must bear a Unique Identification (UID) in data matrix format on a nameplate, following MIL-STD-130, and be assigned a serial number in the format contract#_no_dashes-000X. A First Article Test (FAT) is required unless waived for qualified prior suppliers, with strict submission deadlines, test procedures including air pressure leak tests, 18-inch drop tests, and form and fit evaluations, all at the contractor’s expense. The contractor must provide test samples unpainted with light preservative, ensure welding and cleaning processes adhere to precise chemical deoxidizing and mechanical cleaning protocols, and seal crevices with MIL-S-81733 sealant. Each unit must contain one-third cubic foot of desiccant per interior volume, and all welding and process controls must be documented and visible at workstations. The Government will conduct FAT testing with an estimated cost of $20,000, and samples will not be returned unless refurbishment is possible and approved. Only the specified shock mount is approved, and substitutions are prohibited without written authorization. The contract includes Buy American, security, small business set-aside, and quality assurance clauses, and the offer deadline is September 9, 2026. Engineering source approval is mandatory for new manufacturers, and all drawing requests must be directed to the designated buyer.

Pa DLA Aviation At Philadelphia

POSTED

DEADLINE

in about 2 months

20’ x 8’ 6” Type 1 New Oxygen Filling and Cleaning ContainerDLA Troop Support is conducting market research to identify qualified sources capable of manufacturing a 20’ x 8’ 6” Type 1 New Oxygen Filling and Cleaning Container with part number SB861.6 NQ, originally produced by Sea Box, Inc with CAGE code 0FXA9. This is not a solicitation for quotes but a sources sought notice aimed at gathering technical capabilities from potential manufacturers. Respondents must submit a complete technical data package that includes the original manufacturer’s proprietary drawings for comparison, as the Government does not possess these drawings and they remain the exclusive property of the original manufacturer. The annual estimated quantity is five units, and the national stock number remains unassigned. Submissions are required by August 24, 2026, and interested parties must contact Avril Dickerson prior to the deadline. The Government is under no obligation to award a contract based on responses, nor will it compensate respondents for information submitted. The North American Industry Classification System code for this requirement is 332439.

DLA Troop Support

POSTED

DEADLINE

81--SHIPPING AND STORAGThis contract, issued under solicitation number SPRPA126RVC07 by the Department of Defense through DLA Aviation at Philadelphia, extends through August 31, 2026, to promote competition for the supply of rotating molded polyethylene containers conforming to Drawing No. 861E001 Revision Latest, as controlled by Container Research Corporation. The item must be manufactured using rotational molding with specific material and finish requirements, including replacement of cadmium plating with electrodeposited alkaline Zinc-Nickel Alloy per ASTM B841. Each container requires a Unique Identification (UID) marking in data matrix format on a nameplate, following MIL-STD-130, with a serial number formatted as contract#_no_dashes-000X. A mandatory First Article Test (FAT) is required for new suppliers, involving dimensional, functional, fit, and leak tests under Federal Test Method Standard 101C, including a 18-inch drop test and pressure retention evaluation, with failure thresholds strictly defined. The contractor is responsible for all FAT sample submission, testing costs, repair, and disposal, with the government estimating $12,000 in testing expenses to be factored into offers. Existing qualified suppliers may request a waiver of the FAT requirement if they can prove identical prior production within the last three years from the same facility without deviations or rejections. Packaging must comply with MIL-STD-2073, and each container must include one-third unit of desiccant per cubic foot of internal volume. All manufacturing must occur in a single facility, and production cannot initiate before FAT approval, with associated costs borne solely by the contractor. The contract enforces Buy American provisions, security exclusions, integrity of unit pricing, and mandatory compliance with WFP Mod Assist and other federal mandates. Communication regarding drawings, UID numbering, FAT arrangements, and nameplate details must be directed exclusively to the designated buyer point of contact via email.

Pa DLA Aviation At Philadelphia

POSTED

DEADLINE

in about 1 month

81--NRP,SHIPPING AND STThis contract, identified by solicitation number SPRPA126RVC02 and issued by the Department of Defense’s DLA Aviation at Philadelphia, pertains to the procurement of plastic containers manufactured via rotomolding to drawing number 05259-829E001, revision latest, with strict compliance to military and technical specifications. Each container must be equipped with a Unique Identification (UID) marking in data matrix format as mandated by MIL-STD-130, and affixed with a nameplate containing a contract-specific serial number format. The contract requires adherence to stringent quality controls, including a First Article Test (FAT) with mandatory submission of one unit within 120 calendar days for dimensional, functional, and leak integrity testing, though waivers may be considered for prior approved suppliers who meet specific criteria such as identical production history within the past three years and use of the same facility and processes. All containers undergo 100% production leak testing using pneumatic pressure methods per Federal Test Method Standard 101C, with rejection thresholds for pressure loss and shell deformation, as well as an 18-inch drop test to verify structural integrity. The use of electrodeposited alkaline Zinc-Nickel Alloy finish replaces cadmium plating, and each unit must include one third of a cubic foot of non-dusting desiccant per interior volume. The contractor is solely responsible for procuring all tooling, testing equipment, and shipping costs for FAT samples, none of which will be returned unless approved and refurbished; destroyed samples are irrecoverable. The contract includes mandatory compliance with Buy American provisions, security exclusions, small business set-asides, and prohibitions against unauthorized use of restricted technologies. Payment and invoicing follow Wide Area Workflow instructions, with delivery and shipping coordinated through designated Navy contacts. The solicitation closes on August 31, 2026, and includes a clause allowing contract extension to promote competition. Engineering source approval is required for new manufacturers, and all inquiries regarding drawings, UID numbering, or FAT coordination must be directed exclusively to the designated buyer email provided on the contract’s first page.

Pa DLA Aviation At Philadelphia

POSTED

DEADLINE

in about 1 month

81--SHIPPING AND STORAGThis contract, solicitation SPRPA126RVB92, issued by the Defense Logistics Agency Aviation at Philadelphia, seeks suppliers for a specialized shipping and storage container conforming to drawing number 05259, 828E001, latest revision, with an aluminum shell. The item requires strict adherence to military and industry standards including AWS D1.2 for aluminum welding, ASTM B 841 for Zinc-Nickel alloy finish replacing cadmium, and MIL-STD-130 for Unique Identification (UID) marking in data matrix format on a nameplate. The UID serial number must follow the format “contract#_no_dashes-000X” and is to be obtained from the buyer. All containers must include one third of a unit of MIL-D-3464 Type II desiccant per cubic foot of internal volume and sealed at crevices using MIL-S-81733 sealing compound. Welding procedures, material controls, and pre-weld cleaning require rigorous documentation, with deoxidizing limited to ten days prior to welding and mechanical cleaning immediately before welding using approved non-iron abrasives. A First Article Test (FAT) is mandatory unless waived for previous approved suppliers who meet strict criteria, including identical production within the last three years at the same facility without deviations or rejections. The contractor must submit one unit for FAT within 120 calendar days of contract award to a government-specified location, bearing explicit labeling and shipping documentation. The government will perform dimensional, functional, and leak testing, including a free-fall drop test from 18 inches and a 30-minute pressure retention test requiring no more than 0.05 PSIG loss. All FAT costs, including shipping, are borne by the contractor, and samples are typically destroyed during testing. Packaging must follow MIL-STD-2073, and the container must be unpainted with only a light preservative on corrosive areas. The solicitation closes August 24, 2026, and includes mandatory clauses on Buy American, small business set-aside, security prohibitions, workflow compliance, and integrity of unit pricing, with an estimated $10,000 government testing cost factored into bids.

Pa DLA Aviation At Philadelphia

POSTED

DEADLINE

More opportunities from Mississippi → MPTAP

Same awarding agency

Deep Cleaning and Sanitization ServicesThe contract entails deep cleaning and sanitization services for vacant units, covering all essential areas including floors, bathrooms, kitchens, windows, and carpets, with specific attention to dusting, odor removal, and thorough sanitization to ensure readiness for occupancy. The scope demands meticulous attention to detail across all cleaning tasks to meet high standards of hygiene and presentation. The solicitation is identified under NAICS code 561720 and is classified as a subcontract issued by the Mississippi Department of Finance and Administration through MPTAP. The posting date is July 24, 2026, with a response deadline of August 19, 2026, both set at 6:00 PM. All work is to be performed at locations managed by the agency, though specific cities or addresses are not provided. The opportunity is open for bidding with no designated set-aside classification, and interested parties must submit responses via the official state portal before the deadline.

Janitorial Services

POSTED

DEADLINE

HVAC System Maintenance and ServicingThe contract involves inspecting, cleaning, repairing, and maintaining residential HVAC systems in vacant housing units to ensure they remain operational and energy efficient. The work is critical to preserving the condition of properties ahead of occupancy, with a focus on reliability, performance, and compliance with efficiency standards. Contractors are expected to handle all aspects of HVAC service including diagnostic testing, component replacement, airflow optimization, and preventive maintenance to minimize future failures. This subcontract is issued under NAICS code 238220 for HVAC installation and repair, managed by the Mississippi Department of Finance and Administration through its MPTAP program. The solicitation was posted on July 24, 2026, with responses due by August 19, 2026. Performance is required across residential units within Mississippi, though specific locations are not detailed. The contract does not include a set-aside designation and no point of contact is provided, with all necessary information accessible through the public bid portal linked in the posting.

Plumbing, Heating, and Air-Conditioning Contractors

POSTED

DEADLINE

Plumbing Systems Repair and MaintenanceThe contract titled Plumbing Systems Repair and Maintenance requires comprehensive inspection, repair, and maintenance of commercial and residential plumbing systems including faucets, drains, toilets, water heaters, and supply lines. Work involves identifying and resolving leaks, clearing clogs, and replacing fixtures to ensure full functionality and compliance with safety and efficiency standards. The scope of work encompasses both preventive maintenance and emergency repairs to keep plumbing infrastructure operating reliably. This is a subcontract under NAICS code 238220, issued by the Mississippi agency MPTAP, with a response deadline of August 19, 2026. The solicitation was posted on July 24, 2026, and bidders must submit their proposals prior to the deadline. The place of performance and specific location details are not specified, indicating that work may be performed across various sites within Mississippi under the agency’s purview. Participation eligibility and set-aside status are not indicated, and interested parties should verify all requirements through the provided web link before submitting a bid.

Plumbing, Heating, and Air-Conditioning Contractors

POSTED

DEADLINE

Electrical Systems Inspection and MaintenanceThe contract requires qualified personnel to inspect, repair, and maintain all electrical systems within vacant units, focusing on outlets, switches, lighting fixtures, circuit breakers, and GFCI compliance to ensure adherence to local electrical codes. All work must be performed with precision and in full compliance with applicable regulations, ensuring safety and functionality of electrical infrastructure in unoccupied properties. The opportunity is advertised as a subcontract under NAICS code 238210, with a response deadline of August 19, 2026, and was posted on July 24, 2026. The contracting agency is MPTAP under the Mississippi Department of Finance and Administration, though specific location details for performance or contact points are not provided. Interested parties should consult the official UI link for additional submission requirements and procedural guidelines.

Electrical Contractors and Other Wiring Installation Contractors

POSTED

DEADLINE

General Building Maintenance and RepairsThe contract titled General Building Maintenance and Repairs is a subcontract issued by the Mississippi Department of Finance and Administration through the MPTAP program, seeking services to prepare housing units for re-occupancy through a range of skilled carpentry and repair tasks. This includes general carpentry work, adjustments to doors and windows, repairs to flooring and cabinetry, as well as minor structural and cosmetic fixes necessary to ensure units meet occupancy standards. All work is intended to restore functionality and appearance to residential spaces with a focus on efficiency and quality outcomes. The solicitation was posted on July 24, 2026, with responses due by August 19, 2026, and is classified under NAICS code 238990 for other specialized trade contractors. The place of performance and agency office details are not specified in the provided data, but the work is expected to occur within Mississippi under the oversight of the state agency. Interested parties must submit proposals prior to the deadline, and while no set-aside preferences are indicated, the opportunity is open to qualified subcontractors capable of delivering timely, professional repairs across multiple units.

All Other Specialty Trade Contractors

POSTED

DEADLINE

Interior Painting and Drywall RepairThe contract encompasses the complete interior painting and drywall repair of vacant residential units, requiring thorough wall preparation such as patching, sanding, and priming before applying finish coats. The scope includes ceiling touch-ups and trim painting to ensure a uniform, professional appearance throughout all interior surfaces. Work must be performed to meet industry standards for residential painting and drywall restoration, covering all necessary materials and labor to restore units to a move-in ready condition. The contract is classified as a subcontract under NAICS code 238320 and is issued by the Mississippi Department of Finance and Administration under the agency name MPTAP. The solicitation was posted on July 24, 2026, with a response deadline of August 19, 2026. The place of performance and specific location details are not provided, but the work is expected to take place within Mississippi. Interested parties must submit proposals by the deadline to be considered for award, with no set-aside provisions indicated. Further information can be accessed via the provided digital link to the state’s contract bid search portal.

Painting and Wall Covering Contractors

POSTED

DEADLINE

Surveying and Layout ServicesThe contract involves comprehensive topographic surveying, as-built verification, and precise layout services specifically for bridge components, ensuring accurate spatial data and alignment throughout the construction process. The work requires advanced surveying techniques to document existing ground conditions, verify final installations against design specifications, and lay out critical structural elements with high precision to meet engineering standards. The solicitation is classified as a subcontract under NAICS code 541370, indicating specialized architectural and engineering services, and is managed by the Mississippi Department of Transportation under the agency name MPTAP. The opportunity was posted on July 24, 2026, with a response deadline of July 28, 2026, providing a narrow window for interested parties to submit proposals. The place of performance is located within Mississippi, though specific city or zip details are not provided, and no setaside provisions are designated for small businesses or other categories. Potential bidders must navigate the state’s contract portal via the provided link to access full details and submit responses before the deadline.

Surveying and Mapping (except Geophysical) Services

POSTED

DEADLINE

Traffic Control and SignageThe contract pertains to the installation of temporary traffic control measures, including detours, signage, and flagging services to support construction activities. It is classified as a subcontract under NAICS code 238910, indicating it involves specialty trade contractors focused on site preparation and related infrastructure work. The solicitation was posted on July 24, 2026, with a response deadline of July 28, 2026, and is managed by the Mississippi Department of Transportation under the agency name MPTAP. Work is expected to occur within Mississippi, though specific city or location details are not provided. The project requires adherence to safety and traffic management standards during active construction phases, ensuring public safety and minimal disruption to motorists. All proposals must be submitted by the deadline to be considered for award.

Site Preparation Contractors

POSTED

DEADLINE

Bridge Deck Waterproofing and Protective CoatingsThe contract involves the application of waterproof membranes and corrosion-resistant coatings on structural elements for a bridge deck project under the Mississippi Department of Transportation’s infrastructure initiative. Work must be completed in accordance with specified technical standards to ensure long-term durability and protection against water infiltration and environmental degradation. The scope includes surface preparation, precise application of protective layers, and adherence to quality control protocols to safeguard the integrity of the structural components. All materials and methods must meet industry benchmarks for performance in high-stress, outdoor environments. The opportunity is posted as a subcontract with a firm deadline for responses on July 28, 2026, and is classified under NAICS code 238290 for other specialty trade contractors. The project is administered by the Mississippi Department of Transportation through its MPTAP office, and performance is expected to occur within the state of Mississippi. While no specific location is detailed, work will focus on bridge deck structures within the agency’s jurisdiction. Interested parties must submit proposals prior to the deadline to be considered for award, and compliance with all technical and safety requirements is mandatory for contract execution.

Other Building Equipment Contractors

POSTED

DEADLINE

Rebar Fabrication and InstallationThe contract entails the fabrication and installation of reinforcing steel for bridge infrastructure components including foundations, piers, and deck structures, covering all aspects of cutting, bending, and precise placement of rebar to meet engineering specifications. Work is to be performed under a subcontract arrangement, with the Mississippi Department of Transportation’s MPTAP division overseeing the project, and all activities expected to occur within the state of Mississippi. Bids must be submitted by July 28, 2026, following a solicitation posted on July 24, 2026, and the work falls under NAICS code 238120 for structural steel and precast concrete contractors. The detailed location of performance and point of contact are not specified, but the work site is associated with bridge construction projects under Mississippi’s transportation infrastructure program.

Structural Steel and Precast Concrete Contractors

POSTED

DEADLINE

Earthwork and GradingThe contract pertains to earthwork and grading activities including excavation, embankment construction, backfilling, and grading for approach roads and foundation support, governed under NAICS code 237990. It is structured as a subcontract and was posted on July 24, 2026, with a response deadline set for July 28, 2026. The work is associated with the Mississippi Department of Transportation or related agency under the name MPTAP, although specific location details such as city, state, or zip code for performance or contact information are not provided. Despite the lack of geographic precision in the data, the scope clearly indicates infrastructure support work critical to roadway and structural foundations, and interested parties must submit responses by the specified deadline to be considered for award under this subcontract opportunity.

Other Heavy and Civil Engineering Construction

POSTED

DEADLINE

Concrete Supply and PlacementThe contract mandates the supply and placement of high-strength concrete for critical structural components of a bridge including abutments, piers, deck, and footings, requiring precise material specifications and technical execution to meet engineering standards. All work must be completed in accordance with the project’s technical requirements, focusing on durability, load-bearing capacity, and long-term performance under environmental stressors. The activity is classified as a subcontract and falls under NAICS code 327320, indicating it pertains to concrete product manufacturing and placement services. The solicitation was posted on July 24, 2026, with a strict response deadline of July 28, 2026, allowing only a four-day window for interested parties to submit proposals. The contracting entity is identified as MPTAP under the Mississippi state organization, though specific location details for the place of performance and office address are not provided. The contract opportunity is accessible via a public link on the Mississippi state website, and while no set-aside provisions or point of contact information is listed, bidders are expected to review the full posting for additional requirements and compliance guidelines.

Ready-Mix Concrete Manufacturing

POSTED

DEADLINE

Truck Customization and Attachment Integration | CLEATUS