Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

Earthwork and Site Grading

Active

Federal

Response Deadline08/17/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract titled Earthwork and Site Grading involves excavation, grading, and site preparation activities necessary to support foundation and utility installation for a Department of Defense project managed by the ASC Commodities Division. Work is to be performed at a location in New Cumberland, Pennsylvania, with a ZIP code of 17070-5002, and is classified under NAICS code 237310 for land subdivision and site preparation. This is a subcontract opportunity posted on August 9, 2026, with a response deadline of August 17, 2026, and is accessible through the DIBBS platform. The contract does not specify a set-aside designation or organization type, and there is no designated point of contact listed. Bidders must be prepared to meet the technical and logistical requirements for earthmoving and site preparation in alignment with federal construction standards.

General Info

Earthwork and site grading for DoD project in New Cumberland, PA, due August 17, 2026, via DIBBS.

Agency

Department Of Defense → ASC COMMODITIES DIVISIONView Agency

NAICS

237310 - Highway, Street, and Bridge ConstructionView NAICS

Place of Performance

NEW CUMBERLAND, PA, 17070-5002, US

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedAug 9

subcontract

Response DeadlineAug 17

Submission deadline

Response Deadline

08/17/2026, 05:00:00 PM UTCin 8 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → ASC COMMODITIES DIVISION

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → ASC COMMODITIES DIVISION

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Excavation, grading, and site preparation activities to support foundation and utility installation.

Similar Contracts

Same NAICS industry code

Paving and Asphalt ServicesThe contract pertains to paving and asphalt services for roadways, parking lots, and access roads, encompassing grading, base preparation, and asphalt placement. It is issued as a subcontract under the NAICS code 237310, which classifies it within the highway and street construction sector. The work is designated to be performed in New Cumberland, Pennsylvania, with a zip code of 17070-5002, and is managed by the Fluid Handling Division of the Department of Defense. The solicitation was posted on August 9, 2026, with a response deadline set for August 20, 2026. The contract does not specify a set-aside type nor include a point of contact, and all submissions must be made through the provided DIBBS portal link.

FLUID HANDLING DIVISION

POSTED

about 7 hours ago

DEADLINE

Road and Highway PavingThe contract solicits subcontracting services for grading, base preparation, and asphalt or concrete paving work on roadways, shoulders, and intersections, exclusively tied to infrastructure at Tinker Air Force Base with a zip code of 73145-8000. The work falls under NAICS code 237310, which covers highway and street construction, and is managed by the Fluid Handling Division within the Department of Defense. The solicitation was posted on August 9, 2026, with a firm response deadline of August 20, 2026, indicating a compressed timeline for interested parties to submit proposals. The contract is structured as a subcontract, suggesting it is part of a larger government-backed project, and while no specific set-aside details are provided, performance is restricted to the designated location at Tinker AFB. All submissions must be made through the official DIBBS platform using the provided solicitation link.

FLUID HANDLING DIVISION

POSTED

about 7 hours ago

DEADLINE

Asphalt Paving and Site Surfacing

LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 7 hours ago

DEADLINE

LACSD Surface Water PFAS Removal Project No. 251, CA

Solicitation # lacsd-surface-water-pfas-removal-project-no-251-ca

The contract involves the design and construction of PFAS treatment facilities at the Bernina and Cedar Glen Water Treatment Plants in California, encompassing comprehensive civil, structural, mechanical, electrical, instrumentation, and process improvements necessary to remove per- and polyfluoroalkyl substances from surface water. The project requires integration of advanced treatment technologies to meet regulatory standards and ensure safe drinking water, with all work to be performed at the designated facilities in California. The solicitation is open to Disadvantaged Business Enterprise (DBE) participants under the Department of Transportation set-aside program and is classified under NAICS code 237310 for water and wastewater treatment plant construction. Interested parties must submit responses by September 3, 2026, with inquiries directed to John Garrison of Pyramid Building & Engineering, Inc., via phone or email provided in the solicitation. The project is managed by Pyramid Building & Engineering, Inc., and the solicitation is posted under the SBA’s opportunity portal for public access.

Pyramid Building & Engineering, Inc.

POSTED

about 8 hours ago

DEADLINE

2026-050 Pavement Repair IDIQ IFB

Solicitation # 2026-050

The City of San Marcos is soliciting sealed bids for an Indefinite Delivery Indefinite Quantity (IDIQ) contract to perform pavement repair, rehabilitation, and reconstruction services across city streets and related roadway infrastructure, including asphalt and concrete pavements, sidewalks, and pavement markings. The scope of work encompasses milling, base repair, hot mixed asphalt concrete application, cold patch repairs, concrete flatwork, and associated maintenance activities, all to be executed under multiple work orders aligned with contract plans and specifications. The annual estimated construction volume is $1,000,000, and bidders must submit a bid bond, cashier’s check, or certified check equal to five percent of that amount. The solicitation, identified as IFB# 2026-050, is governed under NAICS code 237310 and is managed by the City’s Purchasing & Contracting Division. Bids must be physically delivered in sealed envelope form to the Office of the Purchasing Manager at 630 E. Hopkins St., San Marcos, TX, no later than September 10, 2026, at 2:00 p.m. local time, with a public bid opening conducted via video conference. A non-mandatory pre-bid video conference is scheduled for August 18, 2026. Tentative award is planned for October 20, 2026, during the City Council meeting. All technical requirements, plans, and specifications are available for download through the City’s e-procurement portal, and work will be performed exclusively within San Marcos, Texas. No electronic submission is permitted, and no clause, representation, certification, or socioeconomic requirement beyond the bid bond is indicated in the available documentation.

CITY OF SAN MARCOS

POSTED

about 18 hours ago

DEADLINE

in about 1 month

Two Sections of Magnolia Hill Road, Reclaim, Grade & Repave, Bethlehem, CT

Solicitation # 38391

The Town of Bethlehem is soliciting bids to reclaim, grade, and repave two sections of Magnolia Hill Road in Connecticut. The request is issued under solicitation number 38391 with a posted date of August 8, 2026, and a response deadline of August 21, 2026, at 3:00 PM. The work is intended to improve road conditions through full reconstruction of the pavement base and surface layers in the designated areas. The procurement is managed by the Connecticut Department of Administrative Services Procurement division under the state’s SLED classification, with no set-aside provisions specified. All responses must be submitted to the state’s CTSource portal, and primary inquiries should be directed to Cindy Radauskas, the point of contact, via phone or email. The project is located entirely within Bethlehem, Connecticut, with no additional geographic restrictions noted.

DAS Procurement

POSTED

DEADLINE

Transportation and Economic Corridors - Invitation to Bid - TND0026145 - Hwy. 881:24, Asphalt Concrete Pavement (ACP), Crack Repair, Cold Milling, Highway Line Painting, Pavement Message Painting and Other Work

Solicitation # AB-2026-05609

Alberta Transportation and Economic Corridors has issued a tender for the construction of pavement-related work along Highway 881:24 from south of Anzac to Highway 63, spanning from kilometre 34.000 to 58.260 in the North Central Region. The project includes 122,408 square metres of cold milling, 16,500 metres of spray patch crack repair, 8,304 metres of shallow mill and fill crack repair, 38,709 tonnes of asphalt concrete pavement using EPS Mix Type M1 with PG 58-28 binder, and 24.76 kilometres of roadway line and pavement message painting. The contractor is responsible for supplying all materials required for the work. Tenders must be submitted via email to trans.tender@gov.ab.ca and must be received no later than 2:01:00 P.M. on Wednesday, September 2, 2026. The project is scheduled for completion by August 15, 2027. All inquiries should be directed to Ikhtiyar Mammadov, Manager of Engineering Services Procurement, at Ikhtiyar.Mammadov@gov.ab.ca or by phone at 780-427-7471. The tender was posted on August 7, 2026, under solicitation number AB-2026-05609.

Transportation and Economic Corridors

POSTED

DEADLINE

Washington Place Driveway Recoating

Solicitation # B27000201

The contract pertains to the recoating of an existing driveway located along Washington Place fronting Beretania Street in Hawaii (Oahu). It is issued by the Department of Accounting and General Services under the solicitation number B27000201, with a posted date of August 7, 2026, and a response deadline of August 20, 2026. The work is classified as a solicitation under the SLED government type, and the place of performance is specifically identified as Oahu. Primary point of contact for inquiries is Dixon Park, reachable at 808-831-6733 or dixon.j.park@hawaii.gov, with James Kurata listed as a secondary contact. The contract does not specify a NAICS code or set-aside type, and all submissions must be made through the online portal linked in the contract details.

Department of Accounting and General Services

POSTED

DEADLINE

Stormwater Decant Facility Asphalt Maintenance– Prevailing Wages

Solicitation # RFQ 6609-26

The City of Spokane is soliciting bids for asphalt maintenance at the Stormwater Decant Facility under solicitation number RFQ 6609-26, with all work subject to prevailing wage requirements. The bid opportunity is open for a one-step unsealing process, and responses are due in approximately 16 days, with a firm deadline of August 24, 2026, at 8:30 PM local time. This solicitation is classified under SLED government procurement and is administered through the Procureware platform, where all documentation, questions, and responses must be accessed and submitted. The place of performance is located in Washington State, and all inquiries must be directed through the Clarifications tab on the bidding portal, as direct contact information is not provided for procurement purposes. There is no set-aside designation indicated, and the NAICS code is not specified, but compliance with federal prevailing wage standards is mandatory for all contractors bidding on this project.

City of Spokane

POSTED

DEADLINE

Asphalt Paving and SurfacingThe contract titled Asphalt Paving and Surfacing encompasses the full scope of grading, base preparation, and asphalt paving for roads, parking lots, and airfields, requiring skilled labor and adherence to technical specifications for durable, safe surfacing. It is structured as a subcontract under NAICS code 237310, indicating it falls within the heavy and civil engineering construction category, and is managed by the California Conservation Corps through the state of California. The solicitation was posted on August 7, 2026, with a firm response deadline of August 27, 2026, at 10:00 PM, leaving interested parties a narrow window to submit proposals. The place of performance and agency office address details are not specified, suggesting work locations may vary across state facilities or projects under the Corps’ purview. Participation requires compliance with state contracting protocols and the ability to execute high-quality pavement work under potentially varying environmental and site conditions.

California Conservation Corps

POSTED

DEADLINE

Forestry Road Construction and MaintenanceThe contract involves the clear, grub, and construct access roads to facilitate timber harvesting operations, with a primary focus on ensuring safe and reliable passage for heavy forestry equipment. Work must be performed in alignment with operational needs, emphasizing durability and safety to support efficient logging activities while minimizing environmental disruption. The contract is classified as a subcontract under NAICS code 237310, indicating it falls within the heavy and civil engineering construction sector. It was posted on August 7, 2026, with a response deadline of August 25, 2026, and is being managed by the state of Utah through its designated agency organization. The place of performance is not specified beyond the state level, and potential bidders are directed to the Utah BonfireHub portal for full details and submission requirements.

POSTED

DEADLINE

Paving and Asphalt SurfacingThe contract solicits services for grading, base preparation, and asphalt paving specifically for parking lots and access roads under the NAICS code 237310, indicating a focus on heavy and civil engineering construction. It is issued as a subcontract by the California Department of Food & Agriculture, with the place of performance located in Orange, California. The opportunity was posted on August 7, 2026, and responses are due by August 31, 2026, at 10:00 PM Pacific Time. No set-aside type or additional organizational details are specified, and while contact information is not provided, the official solicitation can be accessed through the CA eProcure portal. The work scope implies the need for experienced contractors capable of meeting state and local standards for road and pavement infrastructure.

California Department of Food & Agriculture

POSTED

DEADLINE

More opportunities from Department Of Defense → ASC COMMODITIES DIVISION

Same awarding agency

Domestic and Export-Controlled Materials ComplianceThis contract requires strict adherence to DFARS regulations governing the use of prohibited materials, specifically mandating compliance around hexavalent chromium, radioactive content reporting, and the exclusion of banned telecommunications equipment. All subcontracted deliverables must be evaluated and documented to ensure no restricted substances are present and that supply chain integrity is maintained in alignment with federal defense standards. The contract applies to materials used both domestically and in export contexts, with full transparency required for sourcing and composition verification. The opportunity is listed as a subcontract under NAICS code 541690, issued by the ASC Commodities Division under the Department of Defense, with performance tied to Tracy, California, ZIP 95304-5000. Interested parties must respond by August 17, 2026, and are directed to the official DIBBS portal for full solicitation details. While no specific set-aside status is indicated, compliance with defense-specific material restrictions and reporting obligations is non-negotiable and critical for award consideration.

Other Scientific and Technical Consulting Services

POSTED

about 7 hours ago

DEADLINE

Cybersecurity Compliance (NIST SP 800-171)The contract requires the implementation and documentation of NIST SP 800-171 cybersecurity controls to safeguard Covered Defense Information within contractor systems that handle classified or sensitive contract data. This effort is mandatory for ensuring compliance with federal cybersecurity standards applicable to defense contractors and involves a full assessment and record-keeping of all required security controls across systems processing protected information. The work must be completed in alignment with the NIST framework and demonstrated through formal documentation to meet contractual obligations. The contract is classified as a subcontract under the NAICS code 541512, associated with computer systems design services, and is issued by the ASC Commodities Division of the Department of Defense with performance required in Tracy, California, 95304-5000. The solicitation was posted on August 9, 2026, with a response deadline of August 17, 2026, indicating a tight turnaround for submission. Although no set-aside type is specified, the contract is governed by DoD cybersecurity regulations and demands strict adherence to NIST guidelines to protect national defense information, making compliance non-negotiable for award consideration.

Computer Systems Design Services

POSTED

about 7 hours ago

DEADLINE

Hazardous Materials Compliance & SDS ManagementThe contract requires identification of all hazardous materials utilized in manufacturing or coating operations and the ongoing maintenance of Safety Data Sheets that comply with OSHA regulations as well as Department of Defense federal requirements. Responsibility includes ensuring accurate, up-to-date documentation for every chemical or substance involved in production processes, with strict adherence to federal standards for hazard communication and worker safety. All SDS must be systematically managed, accessible, and aligned with current regulatory frameworks to support compliance during inspections and operational audits. Performance is based in Tracy, California, with a response deadline of August 17, 2026, and the contract is classified as a subcontract under NAICS code 541620, which pertains to environmental consulting services. The procuring entity is the ASC Commodities Division within the Department of Defense, indicating the work supports defense-related manufacturing or supply chain activities. Full compliance with both OSHA and DoD mandates is non-negotiable, and the contractor must demonstrate proven capability in hazardous materials management, documentation accuracy, and regulatory vigilance to meet the obligations of this engagement.

Environmental Consulting Services

POSTED

about 7 hours ago

DEADLINE

Packaging, Palletization, and Labeling ServicesThe contract requires the provision of packaging, palletization, and labeling services for lock washers in accordance with MIL-STD-129 standards and DLA RP001 requirements, ensuring all units meet military specifications for identification, handling, and shipment. The work must be completed such that each item is properly labeled, packaged at the unit level, and palletized for efficient transport and inventory management, with the final delivery destination being Tracy, CA, and the zip code 95304-5000. All activities must align strictly with the defined military packaging protocols to guarantee compliance and seamless integration into the Defense Logistics Agency’s supply chain. The solicitation is classified as a subcontract under the NAICS code 493190, which pertains to other warehousing and storage, indicating the scope focuses on logistics and handling rather than manufacturing. The contract was posted on August 9, 2026, with a response deadline of August 17, 2026, and is managed by the ASC Commodities Division under the Department of Defense. While no specific point of contact or set-aside details are provided, performance is exclusively tied to the Tracy, CA location, and the winning party will be responsible for full adherence to all labeling, packaging, and palletization directives without deviation.

Other Warehousing and Storage

POSTED

about 7 hours ago

DEADLINE

Precision Lock Washer ManufacturingThe contract calls for the manufacture of precision lock washers in full compliance with military specifications, ensuring adherence to strict material composition, dimensional tolerances, and performance criteria. The product must meet all technical and quality standards required for military-grade applications and is destined for delivery to Tracy, CA, specifically to a facility with the ZIP code 95304-5000. The solicitation is structured as a subcontract under NAICS code 332722, which classifies the activity as forging and stamping operations, and is managed by the ASC Commodity Division under the Department of Defense. All responses must be submitted by August 17, 2026, with the solicitation posted on August 9, 2026, providing a window of eight days for interested parties to prepare and submit proposals. The place of performance is fixed at Tracy, CA, and full compliance with the military standards is mandatory for award consideration.

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 7 hours ago

DEADLINE

Close-Tolerance Screw Manufacturing and SupplyThe contract requires the precision manufacturing, inspection, packaging, and delivery of 87 close-tolerance screws identified by NSN 5305-01-618-7124, all of which must adhere strictly to Department of Defense standards and military specifications. The work is to be performed in San Diego, California, with the final delivery expected to meet all quality and compliance requirements set by the Defense Logistics Agency. This subcontract is under the NAICS code 332722, indicating it pertains to screw, bolt, and nut manufacturing, and is part of the ASC Commodities Division's procurement activities. Responses must be submitted by August 17, 2026, with the solicitation posted on August 9, 2026. The contract is managed through the DIBBS platform, and all technical, dimensional, and material requirements must align with existing military guidelines to ensure interoperability and reliability in operational environments. The supplier is expected to provide full traceability, documentation, and certification for each screw, including inspection reports and packaging compliance to prevent damage during transit and storage. Deliverables must be ready for immediate acceptance and integration into military logistics systems.

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 7 hours ago

DEADLINE

Packaging & Shipment Preparation for Military LogisticsThe contract requires the packaging and staging of military shipments in full compliance with MIL-STD-2073-1E, MIL-STD-129, and DLA RP001 standards, ensuring all materials are properly labeled, secured, and documented for transit. Work must be performed to meet rigorous Department of Defense logistics protocols, with all shipments destined for Tinker AFB at zip code 73145-8000. The subcontract is categorized under NAICS code 493190, indicating it involves warehousing and storage services tied to transportation support. The request for quotation was posted on August 9, 2026, with responses due by August 17, 2026, and is managed by the ASC Commodities Division under the Department of Defense. Performance must adhere strictly to federal military packaging directives to ensure readiness and interoperability within the defense supply chain.

Other Warehousing and Storage

POSTED

about 7 hours ago

DEADLINE

Hazardous Materials Handling & Labeling ComplianceThe contract requires full compliance with OSHA Hazard Communication standards and DFARS 252.223-7001 for the proper labeling of hazardous materials, ensuring all chemical substances are accurately identified and marked with compliant hazard warnings. The contractor must assess materials subject to additional regulatory frameworks beyond OSHA, and submit revised or new labels that meet all applicable federal requirements, including those under alternative statutes. This work is critical to maintaining safety and regulatory alignment within Department of Defense operations, particularly at Tinker Air Force Base, where the performance is mandated to take place. The subcontract falls under NAICS code 541690 and was posted on August 9, 2026, with a response deadline of August 17, 2026. The contracting entity is the ASC Commissions Division under the Department of Defense, and all deliverables must be submitted through the designated DIBBS system. While no specific set-aside type is indicated, the work emphasizes strict adherence to federal safety and labeling protocols, making technical accuracy and regulatory knowledge essential qualifications for successful performance. Failure to comply with labeling standards could jeopardize operational safety and contractual obligations.

Other Scientific and Technical Consulting Services

POSTED

about 7 hours ago

DEADLINE

Supply of Roller Bearing Retainer (NSN: 3110011837133)Six units of the RETAINER ROLLER BEARING with NSN 3110011837133 are to be supplied and delivered to the DLA Distribution Depot located at Tinker Air Force Base in Oklahoma, with a delivery destination zip code of 73145-8000. The requirement is issued under a subcontract classification with a NAICS code of 332999 and is managed by the ASC Commodities Division under the Department of Defense. The solicitation was posted on August 9, 2026, and responses must be submitted no later than August 17, 2026. All deliveries must meet specified technical requirements for the bearing retainer and be routed to the designated military logistics hub to support defense operations. The procurement is part of routine maintenance and supply chain replenishment efforts, and full compliance with federal acquisition standards is expected.

All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 7 hours ago

DEADLINE

Freight & Logistics to Camp Lejeune, NCThe contract is for the transportation of packaged goods from origin to Camp Lejeune, North Carolina, operating under FOB origin terms, which means the seller is responsible for delivering the goods to the carrier at the point of origin, and the buyer assumes all responsibility and risk thereafter. All shipments must comply with military shipping documentation requirements and include coordination for final delivery on the base, ensuring seamless integration with Department of Defense logistics protocols. The North American Industry Classification System code 484220 identifies this as a specialty freight trucking service, indicating the need for experienced carriers familiar with secure, regulated military transport procedures. The solicitation is issued as a subcontract under the ASC Commodities Division of the Department of Defense, with a response deadline of August 17, 2026, and a posting date of August 9, 2026. Performance is specifically required at Camp Lejeune, NC, with zip code 28542, and bidders must be prepared to handle all logistical, procedural, and compliance elements associated with delivering to a military installation.

Specialized Freight (except Used Goods) Trucking, Local

POSTED

about 7 hours ago

DEADLINE

Military-Compliant Packaging & Bar-CodingThe contract requires the packaging and bar-coding of fasteners in strict compliance with MIL-STD-129 and DLA RP001 standards, ensuring all items are properly unitized and marked with standardized identifiers for military logistics. This includes precise labeling, bar-code application, and packaging procedures that meet Department of Defense requirements for traceability, durability, and operational readiness. The work is to be performed at Camp Lejeune, North Carolina, with a zip code of 28542, and must be completed by the response deadline of August 17, 2026. It is classified as a subcontract under NAICS code 561910, which pertains to other support services, and is issued by the ASC Commodities Division under the Department of Defense. All deliverables must conform to federal military specifications without exception to ensure seamless integration into the DoD supply chain.

Packaging and Labeling Services

POSTED

about 7 hours ago

DEADLINE

Hazardous Materials Compliance & LabelingThe contract titled Hazardous Materials Compliance & Labeling requires the preparation of hazard warning labels and Safety Data Sheets (SDS) aligned with OSHA’s Hazard Communication Standard and MIL-STD-129 specifications for all materials utilized in production or packaging processes. This subcontract is issued by the ASC Commodities Division under the Department of Defense and is targeted at ensuring consistent, accurate, and military-standardized documentation and labeling of hazardous substances. Performance of the work is mandated to occur at Camp Lejeune, North Carolina, with a strict deadline for responses by August 17, 2026, and the solicitation was posted on August 9, 2026. The NAICS code 541690 indicates this falls under other scientific and technical consulting services, emphasizing the specialized nature of compliance documentation development. All deliverables must meet federal safety and labeling requirements to support safe handling, storage, and transportation of materials within military supply chains.

Other Scientific and Technical Consulting Services

POSTED

about 7 hours ago

DEADLINE