This Solicitation opportunity from Government of Canada was posted on May 28, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

EB281-261672 - Elevating Devices Maintenance - BIO

Closed

WS5589560079International

Submission Closed04/30/2026, 02:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 811310

New

1089 – Cafeteria freezer #1 & Cooler #4 Replacement

Solicitation # 1089-cafeteria-freezer-1-cooler-4-replacement

This solicitation issued by Adams & Associates, Inc. involves the removal and replacement of walk-in freezer number one and walk-in cooler number four in Indiana. The freezer requires replacement due to significant frame and door damage, while the cooler needs replacement because of a sagging ceiling and operational failures. Additionally, the project includes correcting the exit door of the main electrical room to ensure compliance with NEC 2020 standards by installing panic hardware and ensuring the door opens toward the egress. Interested vendors must attend a mandatory site visit on September 3, 2026, at 2:30 PM to be eligible for consideration. Proposals are due by September 11, 2026, at 3:00 PM. This opportunity is set aside for various small business categories, including SDB, WOSB, HUBZone, and VOSB, under NAICS code 811310.

Adams & Associates, Inc.

POSTED

DEADLINE

Replace Ice-machine in café

Solicitation # 26-138

Adams & Associates, Inc. is seeking proposals for the removal and replacement of an ice maker in a cafe located in Indiana. The current unit requires a new evaporator coil and extensive repairs to remain operational, necessitating a full replacement. This solicitation is set aside for various small business categories, including SDB, WOSB, HUBZone, and VOSB certifications, under NAICS code 811310. To be eligible for consideration, vendors must attend a mandatory site visit on September 3, 2026, at 3:00 PM. All final proposals must be submitted by the deadline of September 11, 2026, at 3:00 PM. Primary inquiries should be directed to Tammy Swallows.

Adams & Associates, Inc.

POSTED

DEADLINE

Field Disassembly of a WWII Tank Hull at Twentynine Palms, CA

Solicitation # M0026426Q0134

Bastion Supply & Logistics is seeking a subcontractor for the field mechanical disassembly of a WWII M4A3 Sherman tank hull at MCAGCC Twentynine Palms, California. The scope of work involves the removal and palletizing of undercarriage components, including track chains, bogie truck assemblies, road wheels, and other hardware, over a period of three to five working days. A specific requirement includes one oxy-acetylene torch cut to be performed by a certified professional with five years of documented experience. The project must be completed between October 31 and December 7, 2026, with quotes due by September 3, 2026. The subcontractor is responsible for providing portable sanitation and managing lead-bearing waste. All personnel must obtain base access and complete mandatory safety and environmental briefings. While Bastion provides a 35,000 lb forklift and a skid steer, the subcontractor must manage their own dunnage and crane mats. This engagement is subject to the Service Contract Act and DOL Wage Determination 2015-5629, requiring certified payroll. Quotes must be submitted as firm not-to-exceed amounts rather than time and materials, and the subcontract is contingent upon the award of the prime contract.

PURECJ HOLDING LLC dba Bastion Supply & Logistics

POSTED

DEADLINE

GENERATOR MAINTENANCE AND INSPECTION SERVICES IN EMBASSY COMPOUND AND RESIDENCES - U.S. EMBASSY MAJURO, MARSHALL ISLANDS

Solicitation # 19RM2826Q0005

The U.S. Embassy in Majuro, Marshall Islands, intends to solicit bids for generator maintenance and inspection services for its compound and residences, with the solicitation expected to be released in mid- to late August 2026. The contract will be awarded on a firm-fixed-price basis, and the government may select an offer without engaging in discussions with respondents. All prospective contractors must be registered in the System for Award Management (SAM) database prior to submission, as required for any award exceeding $40,000, and registration must be completed well in advance of the response deadline. The North American Industry Classification System code for this opportunity is 811310, and there is no set-aside for small businesses or other categories. Responses must be submitted electronically via email to MartinezLC2@state.gov in MS-Word, MS-Excel, or PDF format, with individual files not exceeding 10MB; larger submissions must be split across multiple emails. The place of performance is Majuro, Marshall Islands, and the point of contact for inquiries is Luis Martinez or Mark T. Whitehead, reachable at 692-247-4011. The solicitation number is 19RM2826Q0005, and the posting date is July 22, 2026.

POSTED

DEADLINE

Solicitation # W911KF-26-S-0022

POSTED

DEADLINE

Solicitation # 31125260000995

POSTED

DEADLINE

Caesar Creek Lake Overhead Crane Wheel Bearing Repair and Replace

Solicitation # W912QR26QA098

W072 Endist Louisville

POSTED

DEADLINE

Calibration and Repair for the Hazardous Gas Detection System

Solicitation # N6852026Q1055

Fleet Readiness Center

POSTED

DEADLINE

On-site SCBA Annual Flow Testing

Solicitation # M0068126Q0085

POSTED

DEADLINE

Area of Interest - Emergency Maintenance Equipment Support (CSO-W911KF25SC002)

Solicitation # W911KF25SC002-A011

The contractor is tasked with providing on-call emergency repair services to restore critical equipment at the Anniston Army Depot in Anniston, Alabama, to its original operational status following unexpected failures. This solicitation, issued as a Commercial Solutions Opening Area of Interest under authority W911KF-25-S-C002, seeks innovative and responsive solutions for maintaining a diverse portfolio of machinery including CNC and conventional mills, lathes, laser cutters, hydraulic and pneumatic presses, testing equipment such as dynamometers and fuel system testers, and other specialized assets detailed in Attachment A. The contractor must supply all necessary resources—labor, tools, diagnostic equipment, transportation, schematics, and documentation—and ensure repairs are performed exclusively by personnel who are experienced, highly trained, and certified according to original equipment manufacturer procedures to safeguard equipment integrity and warranty validity. All work must be executed on-site at the depot, and responders must be capable of acknowledging an emergency notification, initiating coordination, and finalizing mobilization within 48 hours of being alerted. Proposal evaluations are based on two equally weighted factors: technical and innovative merit, assessed through workforce certifications and the novelty of the proposed approach, and operational impact, measured by the ability to rapidly deploy and sustain repairs with a resilient supply chain. Price and funding availability are considered only to ensure fairness and feasibility, not as a weighted merit criterion. Final award is contingent upon sufficient funds being available. Offerors must be registered in SAM.gov and comply with installation access protocols, including pre-registering visits through the Pass Visitor Pre-Registration System and presenting a Real ID at the main gate if lacking a current badge. Submissions must be emailed to the designated points of contact with the exact subject line provided, and are due by September 1, 2026. Questions must be submitted by August 20, 2026. There is no predefined CLIN structure or estimated contract value; this is a solution-seeking notice where pricing and scope will be defined during subsequent negotiation phases based on evaluated proposals.

POSTED

DEADLINE

C5613488-D - Oxidation Ditch Aerator Maintenance and Repair Services

Solicitation # 0000040166

The California Department of Corrections and Rehabilitation is seeking a contractor to provide comprehensive maintenance and repair services for oxidation ditch aerators and mixers at the California Mens Colony wastewater plant in San Luis Obispo. The selected contractor is responsible for providing all necessary labor, materials, equipment parts, transportation, and permits, including travel and per diem expenses, to ensure both scheduled and as-needed services are performed. This solicitation, identified by number 0000040166, was posted on August 24, 2026, with a response deadline of September 25, 2026. Interested parties can coordinate with the primary point of contact, Elizabeth Fisher, regarding the requirements for this state-level engagement.

California Department of Corrections & Rehabilitation

POSTED

DEADLINE

Deionized Water Filtration System Maintenance

Solicitation # 2027-RFP-00069

The San Mateo County Sheriff's Office is seeking a vendor to provide preventative maintenance for the deionized water filtration systems at its Forensic Laboratory located at 50 Tower Road in San Mateo, California. The scope of work involves servicing the Millipore Elix 20 and Milli-Q Advantage A10 Water Purification Systems, which are critical for producing Type II deionized water for general laboratory use and Type I deionized water specifically for the Forensic Biology Unit. Maintenance services are required to be performed during two specific windows in November 2026 and May 2027. This solicitation, identified as 2027-RFP-00069, is managed by the Sheriff's Office under the jurisdiction of California. Interested parties must submit their responses by the deadline of September 9, 2026. The procurement process will utilize standard San Mateo County contract templates, which establish the legal framework for services, payment terms, termination clauses, and indemnification requirements. Primary coordination for this project is handled by Laboratory Director Samantha Dal Porto and Administrative Services Manager Veronica Ruiz.

Sheriff's Office

POSTED

about 24 hours ago

DEADLINE

in 15 days

AI Contract Overview

The contract titled EB281-261672 for Elevating Devices Maintenance at the Bedford Institute of Oceanography requires comprehensive services to maintain, inspect, test, service, and update all elevating devices located at the facility in Nova Scotia. This includes supplying all necessary tools, equipment, electronic programs, materials, travel, supervision, and labor to ensure continuous operational integrity and regulatory compliance. The scope encompasses routine maintenance as well as software updates and upgrades critical to the safe and efficient functioning of the equipment. The solicitation, issued under WS5589560079 by Public Services and Procurement Canada on behalf of the Department of Fisheries and Oceans, is open for responses until April 30, 2026 at 2:00 PM Eastern Time, with the opportunity posted on May 28, 2026. All work must be performed at the Bedford Institute of Oceanography in Nova Scotia, and inquiries should be directed to the primary point of contact, Dylon Leonard, via email at dylon.leonard@tpsgc-pwgsc.gc.ca.

General Info

Maintain, inspect, test, and update elevating devices at Bedford Institute of Oceanography, Nova Scotia, until April 30, 2026.

Agency

Government of Canada → Department of Public Works and Government ServicesView Agency

NAICS

811310 - Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and MaintenanceView NAICS

Place of Performance

*Nova Scotia, CAN

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PhaseClosed

PostedApr 13

Solicitation

Response DeadlineApr 30

Deadline has passed

Submission Closed

04/30/2026, 02:00:00 PM UTC

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyGovernment of Canada → Department of Public Works and Government Services

Contacts1 person available

OfficeN/A

Organization / Agency

Government of Canada → Department of Public Works and Government Services

View Agency Profile

Office AddressN/A

Contacts

Leonard Dylon (SPAC/PSPC) (il-lui / he-himPoint of Contact

contact@example.gov

Full Description

Public Services and Procurement Canada on behalf of Department of Fisheries and Oceans has a requirement for the furnishing of all tools, equipment, electronic programs, materials, travel, supervision and labor to maintain, inspect, test, provide software updates and upgrades, and service the elevating devices within the Bedford Institute of Oceanography. For inquires of please contact the Contracting Authority Dylon Leonard: Dylon.Leonard@tpsgc-pwgsc.gc.ca