Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, June 24 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

EcoStruxure Panel Server Wired by Design (a universal concentrator Modbus gateway)

Active
PR480603Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

ORNL is seeking quotes for the EcoStruxure Panel Server Wired by Design, a universal concentrator Modbus gateway, under solicitation PR480603, with the requirement that proposals include the exact item or a domestic equivalent as permitted under FAR 52.211-6. The solicitation was posted on June 19, 2026, and responses are due by June 26, 2026, at 8:00 PM Eastern Time. This is a combined solicitation categorized under NAICS code 334290, with no specific set-aside designation. The contract is administered by Ut-Battelle LLC, acting as a Department of Energy contractor, with performance taking place in Oak Ridge, Tennessee. The primary point of contact for inquiries is Brittanie Mack-Brewster, reachable via email at mackbrewstbc@ornl.gov. All correspondence and submissions must align with the technical specifications of the listed device and be directed to the provided SAM.gov link for official documentation and submission procedures.

General Info

ORNL seeks EcoStruxure Panel Server Wired by Design via solicitation PR480603, due June 26, 2026, in Oak Ridge, Tennessee.

Agency

Department Of Energy → Ornl Ut-Battelle Llc-Doe ContractorView Agency

NAICS

334290 - Other Communications Equipment ManufacturingView NAICS

Place of Performance

Oak Ridge, TN, 37830, USA

Set-Aside

NONE

Documents

(5)

RFP PR480603 EcoStruxure Panel Server Wired by Design

PDF•rfp

Attachment D - Reps and Certs - Abbreviated - 03.09.2026

PDF•reps-and-certs

Prime Supplemental Flowdown Document BSD-CS-2258-01.13.2026

PDF•prime-flowdown-clauses

Attachment C - Bill of Materials for RFP480603

PDF•bill-of-materials

Terms and Conditions Purchase Order Commercial Products and Services BSD-CS-2154

PDF•terms-and-conditions

AI Contract Breakdown

Uniform Contract Format

Sign up to view the full breakdown with detailed analysis of each section.

Timeline

PhaseCombined Synopsis
Posted

Combined Synopsis

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Energy → Ornl Ut-Battelle Llc-Doe Contractor
Contacts1 person available
OfficeOak Ridge, TN, 37831, USA
Organization / Agency
Department Of Energy → Ornl Ut-Battelle Llc-Doe Contractor
View Agency Profile
Office AddressOak Ridge, TN, 37831, USA
Contacts
Brittanie Mack-Brewster
contact@example.gov

Full Description

Show more

EcoStruxure Panel Server Wired by Design (a universal concentrator Modbus gateway)


ORNL is requesting a quote for the same or domestic equivalent of an EcoStruxure Panel Server Wired by Design (a universal concentrator Modbus gateway). FAR 52.211-6, Brand Name or Equal applies.

Similar Contracts

NAICS: 334290
New
Canada
Low Bandwidth Mesh Solution with Satellite ConnectivityThe Royal Canadian Mounted Police is seeking to establish a National Individual Standing Offer for low bandwidth mesh communication devices with integrated satellite connectivity, designed to operate reliably in remote, mountainous, and low-cellular-coverage areas across Canada, including regions covered by Comprehensive Land Claims Agreements. The required devices must be all-in-one units combining satellite (Iridium-based), GPS, and mesh network capabilities without external antennas or batteries, and must be commercially available. Full technical compliance includes integration with Android 12 or higher, compatibility with Android Team Awareness Kit (Civ-TAK/ATAK) 5.0 and above, and a certified ATAK plugin available on TAK.GOV and the Google Play Store. Devices must also support Bluetooth and USB-C connectivity to interoperate with RCMP-issued cellular handsets, including specific Samsung and Motorola models. The offering must include the capability to host on-premise server management software and provide essential data services such as real-time location tracking and messaging to enhance situational awareness. The standing offer has a base term of three years with the option to extend for two additional one-year periods. Deliveries must be completed within thirty days of a call-up, with shipping governed by DDP Incoterms 2020 to指定 locations including Surrey, Ottawa, and Winnipeg. Pricing is structured across five tables covering base and option years, including line items for devices with perpetual licenses, initial software deployment, annual maintenance, extended warranties of one, two, or three years, battery replacements, and engineering services. Offers are evaluated solely on the lowest compliant price, with mandatory technical criteria and Supply Chain Integrity (SCI) qualification serving as pass/fail gates; failure to meet any requirement renders an offer non-responsive. Suppliers must submit a complete, three-part PDF offer under five megabytes via email to E_Pacific_Bids@rcmp-grc.gc.ca by the deadline, with no zip files, links, or fax submissions accepted. All packaging must meet environmentally preferable standards, being reusable, returnable, or recyclable, and the contractor must take back any non-recyclable packaging at no cost to Canada. Offerors must comply with the Ineligibility and Suspension Policy, disclose independence via a Certificate of Independent Offer Determination, and complete the Supply Chain Security Information Vendor Submission Form. Certification of compliance with anti-forced labor standards is also required, with no insurance obligations imposed on the contractor beyond legal compliance.
Royal Canadian Mounted Police

POSTED

3 days ago

DEADLINE

in 4 days
View Details
NAICS: 334290
New
Federal
COUPLER,DIGITAL DATThis contract pertains to the procurement of a COUPLER, DIGITAL DAT under solicitation number N0038326QQA28, issued by the Naval Supply Systems Command Weapon Systems Support based in Philadelphia, Pennsylvania. The response deadline has been extended multiple times, with the final deadline set for June 30, 2026, and the solicitation was posted on June 18, 2026. The North American Industry Classification System code is 334290, indicating specialized machinery manufacturing, and the contract falls under the Department of Defense. The primary point of contact is Jessica M. Gershenfeld, reachable via email. The terms include a one-year warranty on supplies after delivery, with defects to be addressed within 45 days of discovery. The delivery term is FOB destination, and payment instructions follow the WAWF system combining invoices and receiving reports. The contract enforces Buy American provisions, limitations on pass-through charges, and requires compliance with equal opportunity and abilityOne contractor guidelines. It also incorporates requirements for inspection and acceptance of supplies, royalty information, and annual representations and certifications, with an emphasis on national defense priorities under DO-A1A rating. No set-aside classification is specified, and the place of performance remains undetermined.
Navsup Weapon Systems Support

POSTED

3 days ago

DEADLINE

in 10 days
View Details
NAICS: 334290
New
Federal
CONTROL BOX ASSEMBLThe contract pertains to the procurement of a CONTROL BOX ASSEMBL under solicitation number SPRMM126QPA04, issued by DLA Mechanicsburg, with a response deadline of July 20, 2026. All contractual documents are deemed issued upon electronic transmission or mailing, and award will be based on compliance with solicitation requirements unless exceptions are explicitly noted in quotes submitted via EDI. The item must adhere strictly to MIL-STD-130 Rev N marking standards and be manufactured under the specified Cage Code 0E3P8 and reference number AY-0601-050. Any design, material, or part number changes require prior written approval from the NAVICP-MECH Contracting Officer, with specific code classifications detailing the nature of modifications, and substitutions must be accompanied by technical documentation and justification. The contractor is fully responsible for quality assurance and inspection, maintaining comprehensive records for 365 days post-delivery, and must ensure all deliverables meet contractual specifications without reliance on sampling to justify defective goods. Packaging must comply with MIL-STD-2073 as referenced in the schedule, and performance must occur at the designated facility unless a formal, written request for a production change is submitted and approved, which requires a $250 administrative credit to the government. Vendors must disclose if they are not the original equipment manufacturer by providing the OEM's CAGE code and part number. Electronic submission of invoices and receiving reports via the PIEE-WAWF system is mandatory, and contractors are required to register for Electronic Document Access (EDA) on the PIEE portal to monitor orders and modifications. Compliance with security and small business program regulations is enforced, including the mandatory use of Workflow Pro and adherence to National Defense Priority Ratings. Distribution of technical data is restricted per OPNAVINST 5510.1, with specific distribution statements controlling access. Only authorized distributors may be considered for award, requiring formal proof of authorization from the original manufacturer. All correspondence and inquiries must be directed to the designated point of contact, and vendors are encouraged to register with NAVSUP WSS to receive automated notifications regarding contract issuances.
SPRMM1 DLA Mechanicsburg

POSTED

3 days ago

DEADLINE

in 30 days
View Details
NAICS: 334290
New
Federal
Multiplexers and Mount rack kitsThe U.S. Department of Defense, through the FA2823 AFTC PZIO office at Eglin Air Force Base, Florida, is soliciting offers for four units of the VITEC TNP-100 PCM Telemetry & IRIG IP Multiplexer (Part Number 17893-us) and four corresponding Single Rack Mount Kits (Part Number 17901), collectively referred to as Multiplexers and Mount Rack Kits, under solicitation FA2823-26-Q-A102. This is a combined synopsis and solicitation for commercial products, structured as a firm-fixed price purchase order, with a total small business set-aside under FAR 19.5, restricted exclusively to small businesses registered in the System for Award Management (SAM). The contract requires full compliance with specified technical standards, including four multi-service BNC connectors (75-ohm unbalanced), one pluggable 1000Base-X SFP module, two RJ45 10/100/1000Base-T ports, support for TMoIP formats (TTL, ECL, CML), baseband analog signaling, IRIG timing in analog formats (1, 10, and 100 kHz), web-based GUI and SNMPv2/v3 remote management, and a 1RU, half-width 19-inch form factor with power consumption under 20W at 100–240 VAC. The equipment must be new and unused, as refurbished or used items are strictly prohibited. Deliveries are due within 60 days of award under FOB Destination terms to the ship-to location at GOULDS, Florida, 32542, with inspection and acceptance performed by the FITODD DoDAAC. All payment requests and receiving reports must be submitted electronically through the Wide Area WorkFlow system using designated DoDAAC codes, with cost vouchers for labor-hour or time-and-materials line items and invoice/receiving report combinations for fixed price items. Proposals must be submitted via email to Alanna Morales-Vargas by 10:00 AM CST on June 26, 2026, and must include the solicitation number, company name, CAGE code, point of contact, and SAM registration status. Offerors are required to register in SAM and WAWF, affirm representations including those related to security prohibitions, trafficking in
FA2823 Aftc Pzio

POSTED

3 days ago

DEADLINE

in 5 days
View Details
NAICS: 334290
New
Federal
Fiber Optic Sensor Cable and Extender SupplyThe contract seeks the supply of high-precision fiber optic lens extenders or integrated cables with a minimum length of six feet, designed to operate reliably with 1550 nm laser systems under stringent aerospace environmental conditions. These components must meet technical specifications for optical performance, durability, and compatibility in demanding operational settings, ensuring seamless integration with existing sensor and communication infrastructure. The products are intended for use in critical defense and aerospace applications where precision, thermal stability, and resistance to vibration and extreme temperatures are essential. This subcontract opportunity is issued under the NAICS code 334290 and is associated with the Department of Defense, specifically the FA2396 USAF AFMC AFRL PZL AFRL PZLE organization. The place of performance is designated as Wright Patterson AFB with a ZIP code of 45433. Proposals must be submitted by the deadline of June 29, 2026, at 2:00 PM Eastern Time, following the posting date of June 18, 2026. No set-aside designation is specified, indicating this is open to eligible contractors without restriction for small business or other categories.
FA2396 USAF Afmc Afrl Pzl Afrl Pzle

POSTED

3 days ago

DEADLINE

in 8 days
View Details