Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, December 9 at 2:00 PM ET

Register Free →

This Award Notice opportunity from Department Of Defense was posted on October 23, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

ELBOW, DISCHARGE

Awarded
SPE8E9-27-T-0050Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 332919
New
Federal
DISK,VALVE
Solicitation # N0010426QNE78
Solicitation N00104-26-Q-NE78 is a request for quotations issued by NAVSUP Weapon Systems Support Mechanicsburg for the procurement of five Valve Disks (NSN 4820-01-453-6627). The material is designated as Special Emphasis Level I material because it is used in crucial shipboard systems where failure could result in serious personnel injury, loss of life, or loss of the ship. Due to this criticality, the contract mandates strict quality assurance, including a higher-level contract quality requirement and a zero-defect acceptance policy. The award will be made to a single responsible offeror based on the most advantageous combination of price and past performance, with past performance weighted as more important than price. Technical requirements specify that the disks must be manufactured from EB Spec 2937 or ASTM-B564, UNS N06625, and must undergo rigorous testing, including ultrasonic inspection prior to machining, dye penetrant inspection after final machining, and alloy identity testing. The contractor must provide forging sketches and First Article Testing reports. All internal threads must be cut rather than cold-formed and inspected per FED-STD-H28. The contractor is required to maintain an ISO-9001 compliant quality system and submit a comprehensive certificate of compliance and test results via the Wide Area Workflow system for review and acceptance by the Portsmouth Naval Shipyard prior to shipment. Packaging must adhere to MIL-STD-2073 and MIL-STD-129 standards.
Navsup Weapon Systems Support Mech

POSTED

about 7 hours ago

DEADLINE

in about 1 month
NAICS: 332919
New
Federal
VALVE,BALL
Solicitation # N0010426QND46
Solicitation N00104-26-Q-ND46, issued by NAVSUP Weapon Systems Support Mechanicsburg, is a total small business set-aside for the procurement of a Ball Valve (NSN 4820-01-107-0899). This item is designated as a Critical Safety Item and Special Emphasis Material (Level I) because it is used in crucial shipboard systems where failure could result in catastrophic loss of life or vital ship systems. The requirement is pursuant to Emergency Acquisition Flexibilities and is certified for national defense under the Defense Priorities and Allocations System. The current solicitation close date is November 6, 2026, with a delivery requirement of 120 days after award on an FOB Destination basis. The contract mandates rigorous quality assurance and traceability standards, including a one-year warranty from the date of delivery and higher-level quality requirements. Contractors must provide comprehensive material certifications, including quantitative chemical and mechanical analysis for specific components such as the body, tube, and ball. Required testing includes liquid penetrant and ultrasonic inspections, with lot acceptance based on a zero-defect policy. Award will be made to a single responsible offeror determined to be most advantageous to the Government, with past performance weighted as more important than price. Invoicing and payment will be processed electronically via the Wide Area Workflow system.
Navsup Weapon Systems Support Mech

POSTED

about 7 hours ago

DEADLINE

in 28 days
NAICS: 332919
New
Federal
BALL & SEAT SET
Solicitation # N0010426QND18
This solicitation, issued by NAVSUP Weapon Systems Support Mechanicsburg, is for the procurement of a Ball and Seat Set (NSN 4820-01-331-6847). The material is designated as Special Emphasis Material Level I because it is used in crucial shipboard systems where failure could result in serious personnel injury, loss of life, or the loss of the ship. Due to a classified annex, offerors must possess a valid U.S. Security Clearance of Confidential or higher to respond. The procurement is a Total Small Business Set-Aside, rated for national defense, and conducted under Emergency Acquisition Flexibility with a delivery window of 120 days. Technical requirements are stringent, requiring specific materials such as SAE-AMS-6931 or ASTM-B367 Grade C-5 for the ball and MD71-GG Mearthane for the seats. The contractor must perform rigorous testing, including hydrostatic tests or dye penetrant inspections, and adhere to strict surface waviness and Teflon coating specifications. Quality assurance is managed through Government Source Inspection via DCMA, with lot acceptance based on zero defects. All certification data and certificates of compliance must be submitted via Wide Area Workflow (WAWF) to the Portsmouth Naval Shipyard for review and acceptance prior to shipment. Award evaluation prioritizes past performance, utilizing the DoD Supplier Performance Risk System (SPRS), with price serving as a secondary factor.
Navsup Weapon Systems Support Mech

POSTED

about 7 hours ago

DEADLINE

in about 1 month
NAICS: 332919
New
Federal
STEM,FLUID VALVE
Solicitation # N0010426QNE26
This solicitation, issued by NAVSUP Weapon Systems Support Mechanicsburg, is for the procurement of 50 fluid valve stems (NSN 4820-01-386-7327). The material is designated as Special Emphasis Level I due to its use in crucial shipboard systems where failure could result in catastrophic loss of life or vessel. Consequently, the contract mandates rigorous quality controls, including a required quality system compliant with ISO-9001 and specific calibration standards such as ISO-10012 or ANSI-Z540.3. The stems must be manufactured according to Electric Boat and Newport News drawings, utilizing specific materials such as QQ-N-286 Alloy UNS N05500 for the stem and ASTM-B505 Alloy UNS C90300 for the nut. Key technical requirements include a prohibition on weld repairs, mandatory ultrasonic inspection for starting materials over 4 inches in diameter, and slow strain rate tensile testing performed by approved laboratories. The contractor must provide a comprehensive Certificate of Compliance and detailed test results via Wide Area Workflow (WAWF) for review by the Portsmouth Naval Shipyard prior to shipment. Award will be made to a single responsible offeror based on a determination of the most advantageous offer, with past performance weighted more heavily than price. Packaging must adhere to MIL-STD-2073 and MIL-STD-129, and all items are subject to Government Source Inspection at the origin.
Navsup Weapon Systems Support Mech

POSTED

about 7 hours ago

DEADLINE

in about 1 month
NAICS: 332919
New
Federal
VALVE,LINEAR,DIRECT
Solicitation # N0010426QFC29
This contract is for the procurement of 11 linear direct valves (NSN 4820-01-061-0162) to be used in crucial shipboard systems. Due to the critical nature of the equipment, the material is designated as Special Emphasis SUBSAFE/Non-Level I material, meaning any defect could lead to catastrophic failure, loss of life, or loss of the ship. The contractor must adhere to strict quality assurance standards, including ISO-9001 and specific calibration requirements, and must provide a Certificate of Compliance and a Certificate of Tests for each serialized component. All items must be permanently marked with unique serial numbers per MIL-STD-792 and must be mercury-free. The contract is a DO-rated order certified for national defense use and is issued under Emergency Acquisition Flexibilities. Delivery is required within 365 days of the effective date on an FOB Destination basis. Payment and receiving reports must be processed through the Wide Area Workflow (WAWF) system, with specific routing to DoDAAC N50286 for shipping and N39040 for inspection and acceptance. Award is based on a single award to the most advantageous offeror, with past performance weighted more heavily than price. Packaging and marking must comply with MIL-STD-2073 and MIL-STD-129, and the contractor is required to maintain a quality system subject to Government Quality Assurance at source.
Navsup Weapon Systems Support Mech

POSTED

about 7 hours ago

DEADLINE

in 7 days

AI Contract Overview

Show more

Solicitation SPE8E9-27-T-0050 is a request for quotations issued by DLA Troop Support Construction and Equipment MRO SVC I for the procurement of 19 discharge elbows, identified by NSN 4210-01-232-2922 and part number M72830013 from Cleveland Gear Company, Inc. The items are classified as critical application items. Delivery is required FOB Origin to DLA Distribution San Joaquin in Tracy, California, with a need ship date of September 30, 2026, and an original required delivery date of April 16, 2027. Inspection and acceptance will occur at the destination in accordance with FAR 52.246-1. The contract mandates strict adherence to DLA packaging requirements (RP001), MIL-STD-129 marking standards, and specific hazardous material guidelines, including a prohibition on the intentional addition of mercury except in specified functional exceptions. Compliance with the Buy American Act, the Berry Amendment, and DFARS 252.204-7012 for safeguarding covered defense information is required. Quotes must be submitted via the DIBBS portal, and the successful contractor will be required to use the Wide Area WorkFlow system for electronic invoicing and payment processing.

General Info

DLA seeks 19 critical discharge elbows delivered to Tracy, California by April 2027.

Contract Value

$16,549

NAICS

332919 - Other Metal Valve and Pipe Fitting Manufacturing

Place of Performance

CA, USA

Set-Aside

NONE

Award Issued Date

Documents

2
PDF, High priority: read this first18 pages · rfq
High
PDF, Low priorityaward
Low

Read all 2 documents

Every page of every file, in your free workspace.

Read the documents

AI Contract Breakdown

Uniform Contract Format

Sign up to view the full breakdown with detailed analysis of each section.

View Full Breakdown

This one is closed. Find the next one like it.

Open contracts like this one, right now:

  • COUPLING, TUBEOpen now, due in 11 days
  • Ductile Water Main Fittings (Three (3) Year Multiyear Contract)Open now, due in 29 days
See open contracts like this

Ask CLEATUS

I've read this contract. Ask me anything.

Timeline

PhaseAwarded
Posted

Solicitation

Awarded

Contract was awarded

Find active opportunities like this

Get full access to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → Defense Logistics Agency
Contacts1 person available
OfficeUSA

Full Description

Show more
DLA award SPE8E927V0129 posted on DIBBS. Awardee: JA MOODY LLC (CAGE 3B558) Total Contract Price: $16,549.00 Award Date: 10-23-2026 Solicitation: SPE8E9-27-T-0050 Line items: - ELBOW, DISCHARGE (NSN/Part 4210012322922, PR 7018589090)

More opportunities from Department Of Defense → Defense Logistics Agency

Same awarding agency

Earlier notices in this NAICS code

Posted before this notice, open and closed

Find Active Opportunities Like This

Get AI-powered intelligence on the opportunities still open

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 750+ contractors already using CLEATUS