Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, September 16 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

Electric Cooling Unit Supply

Active

Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The Defense Logistics Agency is procuring one commercial off-the-shelf Electric Cooling Unit identified by NSN 5999200141442 under a subcontract arrangement. The requirement is strictly for the supply of the unit with no associated installation, configuration, or additional services. The North American Industry Classification System code 423690 applies, indicating the contract falls under miscellaneous nondurable goods merchant wholesalers. The solicitation was posted on July 15, 2026, and the performance location and point of contact details are not specified. The contract is linked to the DIBBS portal under award number SPE7M125P6666, and no set-aside designation or organizational type information is provided.

General Info

Defense Logistics Agency procures one commercial Electric Cooling Unit, NSN 5999200141442, with no installation or services.

Agency

Department Of Defense → Defense Logistics AgencyView Agency

NAICS

423690 - Other Electronic Parts and Equipment Merchant WholesalersView NAICS

Place of Performance

Not specified

Set-Aside

NONE

Documents

This scope was carved out of SPE7M5-25-T-3651.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

COOLING UNIT, ELECTR

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 15

subcontract

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → Defense Logistics Agency

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → Defense Logistics Agency

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Supply of one commercial off-the-shelf Electric Cooling Unit (NSN: 5999200141442) to fulfill a DLA procurement. No installation or additional services required.

Similar Contracts

Same NAICS industry code

Guam Army National Guard Public Address and Lighting Lifecycle Replacement

Solicitation # W911YU26QA014

Solicitation W911YU26QA014 is a request for a single-award, firm-fixed-price supply contract for the Guam Army National Guard 721st Army Band to perform a Public Address and Lighting Lifecycle Replacement. The procurement is set aside 100% for Service-Disabled Veteran-Owned Small Businesses (SDVOSB) under NAICS code 423690. The scope of work requires the delivery of brand new, non-refurbished equipment, including Chauvet Pro lighting systems, Roland sampling pads, DPA microphone adapters, and specialized mic stands. All items must meet specific salient characteristics and include standard manufacturer warranties. Delivery is required by December 31, 2026, with shipping costs borne by the contractor and delivery coordinated through the Unit Supply NCO. Quotations must be submitted electronically via the Procurement Integrated Enterprise Environment (PIEE) by September 18, 2026, at 3:00 PM ChST. The government will utilize the Lowest Price Technically Acceptable (LPTA) source selection process, where offerors are first evaluated as either acceptable or unacceptable based on their ability to meet all technical requirements before pricing is considered. The contract incorporates various FAR and DFARS clauses, including requirements for unique item identification for items over 5,000 dollars, Buy American preferences, and the use of the Wide Area WorkFlow (WAWF) system for electronic invoicing and payment.

W7QP Uspfo Activity Gu Arng

POSTED

about 15 hours ago

DEADLINE

IDS & ACS Installation

Solicitation # W50S6Z26QA004

Solicitation W50S6Z26QA004 is a firm-fixed-price requirement for the turnkey installation, programming, and system tie-in of a Honeywell Vindicator Intrusion Detection System (IDS) and Access Control System (ACS) at Robins Air Force Base, Georgia. The project specifically covers Building 2078, Room 118 and associated spaces, including the installation of a badging system, server, VBM workstation, printer, and camera. To be eligible, the contractor must be a Honeywell Vindicator certified installer with at least three years of experience. The installation must adhere to strict physical security compliance standards, including DODM 5200.01 Volume 3, DAFMAN 16-1404 Volume 3, AFI 31-101, ICD-705, and ESE-SIT-0001. All equipment used must be qualified Commercial Off The Shelf items from the Air Force Security Forces Center Non-Nuclear Configuration Management Database. The contract is a total small business set-aside with a required delivery date of December 29, 2026. Award will be based on the overall best value, evaluated through technical capabilities, past performance from the last three years, and price reasonableness. Technical evaluations will specifically focus on Honeywell certifications, proposed equipment, and the delivery timeline. The contractor is responsible for all infrastructure upgrades, materials, and transportation costs, and must comply with 32 CFR Part 2002 regarding Controlled Unclassified Information. Payment will be processed electronically via the Wide Area WorkFlow system. Final acceptance is contingent upon successful government inspection and verification testing in accordance with the ESE-SIT-0001 Test and Turnover Plan.

W7M3 Uspfo Activity Gaang 116

POSTED

about 15 hours ago

DEADLINE

3D Printer Equipment Supply

Texas A&M University System

POSTED

DEADLINE

Police Command Center IT Equipment

Solicitation # port-of-houston-authority-1255817

The Port of Houston Authority is soliciting competitive sealed bids for the Police Command Center IT Equipment project, specifically for the procurement of access control and camera parts. This is a box sale for parts only, and the scope explicitly excludes all labor and installation services. All responses must be submitted through the Workday eProcurement System by September 23, 2026, at 11:00 a.m., with a public bid opening following at 11:30 a.m. via Microsoft Teams. Submitted responses must remain valid for 120 calendar days after the due date. Bid security is not required for this procurement. Respondents seeking Small Business Enterprise participation credit must submit an executed Statement of Intent for each proposed SBE. To qualify for credit, SBEs must be first-tier certified contractors that perform a commercially useful function and are not used as pass-through entities. Credit is only granted for project-specific goods and services, and SBEs are generally prohibited from subcontracting more than 50 percent of the work counted toward the SBE goal without a waiver from the Port Houston Authority. Prime contractors are required to comply with the PHA Nondiscrimination Mandate and the Small Business Development Program's dispute resolution provisions.

Port of Houston Authority

POSTED

DEADLINE

Supply of Silicone Rubber Insulation Tape (NSN 5970-01-682-1265)

ASC COMMODITIES DIVISION

POSTED

DEADLINE

Supply of Evoqua Water Technologies Component (P/N W3T106668)

ACTIVE DEVICES DIVISION

POSTED

DEADLINE

Supply of Replacement Components for Automatic DA Servers

Navsup Weapon Systems Support Mech

POSTED

DEADLINE

in about 1 month

Wiring Harness Supply (NSN 6150-01-601-2876)

ASC COMMODITIES DIVISION

POSTED

DEADLINE

RF Cable Assembly Supplier (NSN 5995-01-589-0228)

ASC COMMODITIES DIVISION

POSTED

DEADLINE

Supply of Quick Release Pins (NSN 5315008785959)

ASC COMMODITIES DIVISION

POSTED

DEADLINE

Molten Salt Bath Consumables Supply

POSTED

DEADLINE

Supply of Additive Manufacturing Printer Filament (NSN 9330-01-696-5442)

DDSP NEW CUMBERLAND FACILITY

POSTED

DEADLINE

More opportunities from Department Of Defense → Defense Logistics Agency

Same awarding agency

BATTERY, STORAGE

Solicitation # SPE7L7-26-Q-2418

This contract, identified as SPE7L7-26-Q-2418, is a firm fixed price solicitation by the Defense Logistics Agency for the procurement of sealed lead acid storage batteries (NSN 6140-01-624-9682). The requirement consists of two line items totaling eight units, with delivery expected 60 days after the order. This is a restricted source item requiring government engineering source approval, and it is designated as a critical application item. The batteries have a non-extendable shelf life of 12 months and must comply with specific hazardous material communication and packaging standards, including MIL-STD-2073-1E and MIL-STD-129. Quality assurance will be managed via zero-based sampling plans according to MIL-STD-1916 or ASQ H1331. Shipments are destined for locations in Oregon and Hawaii, with strict prohibitions against the intentional addition of mercury except where functionally required.

Battery Manufacturing

POSTED

about 10 hours ago

DEADLINE

BATTERY, STORAGE

Solicitation # SPE7L7-26-Q-2419

This contract is a solicitation for the procurement of five storage batteries, part number PS-12100 F1 from Power-Sonic Corporation, under NSN 6140-01-294-6528. The items are designated as critical application items and must feature F1 quick disconnect tabs. The contract is established as a firm fixed price agreement with a delivery requirement of 60 days after the order is placed. Each unit is destined for a specific naval vessel, including the USS Stout, USS Laboon, USS Barry, USS Russell, and USS John S McCain. The batteries are classified as Type I items with a non-extendable shelf life of 12 months. Strict adherence to hazardous materials packaging, marking, and shipping standards is required, specifically prohibiting the intentional addition of mercury except where functionally necessary. Quality assurance will be managed through zero-based sampling plans in accordance with MIL-STD-1916 or ASQ H1331. All packaging and marking must comply with MIL-STD-2073-1E and MIL-STD-129, with inspection and acceptance occurring at the point of origin.

Battery Manufacturing

POSTED

about 10 hours ago

DEADLINE

BATTERY ASSEMBLY

Solicitation # SPE7L7-26-Q-2417

This solicitation from the Defense Logistics Agency under the Department of Defense is for the procurement of two battery assemblies, identified by NSN 6140-01-664-6369. The contract requires delivery within 60 days after receipt of the order. Strict compliance is required regarding cybersecurity and export controls. The provider must be a CMMC Level 2 Certified Third-Party Assessment Organization and adhere to regulations concerning Covered Defense Information. Additionally, the technical data is subject to ITAR and EAR export controls, meaning access is limited to contractors with an approved US/Canada Joint Certification Program certification and completed DLA export-control training.

Battery Manufacturing

POSTED

about 10 hours ago

DEADLINE

LIMITER, RADIO FREQU

Solicitation # SPE4A7-26-Q-1069

The Defense Logistics Agency within the Department of Defense has issued solicitation SPE4A7-26-Q-1069 for the procurement of 49 radio frequency limiters. The items are identified by NSN/Part Number 1430-01-224-2273 and are associated with purchase request 7017409812. This federal solicitation was posted on September 11, 2026, with a response deadline of September 15, 2026. Interested parties should direct inquiries to the buyer via the DIBBS portal or the provided contact email.

Other Electronic Component Manufacturing

POSTED

about 10 hours ago

DEADLINE

COVERALLS, ANTI-EXPO

Solicitation # SPE1C1-26-Q-0498

The Defense Logistics Agency under the Department of Defense has issued solicitation SPE1C1-26-Q-0498 for the procurement of one unit of anti-exposure coveralls, identified by NSN/Part Number 8415-01-593-7934. This federal requirement is tracked under purchase request 7018286739. The solicitation was posted on September 11, 2026, with a response deadline of September 18, 2026. Interested parties should direct all inquiries to the buyer via the email address provided in the primary point of contact or through the DIBBS portal using the specific solicitation number.

Cut and Sew Apparel Manufacturing (except Contractors)

POSTED

about 10 hours ago

DEADLINE

GOVERNMENT FIT VERIFIC

Solicitation # SPE7L3-26-Q-1328

The Defense Logistics Agency within the Department of Defense has issued solicitation SPE7L3-26-Q-1328 for Government Fit Verific, identified by part number 0001S00000060. This federal procurement opportunity was posted on September 11, 2026, and requires a response by the deadline of September 28, 2026. The contract is managed under purchase request 7017604125, with specific quantity requirements detailed within the solicitation documents. Interested parties can access further details and submission guidelines through the DIBBS portal.

Testing Laboratories and Services

POSTED

about 10 hours ago

DEADLINE

POWER SUPPLY, UNINTERRU

Solicitation # SPE7L7-26-Q-2372

Solicitation SPE7L7-26-Q-2372 is a fixed-price request for quotations issued by the Defense Logistics Agency Land and Maritime for two uninterruptible power supplies, identified by NSN 6130-01-673-0176 and Motorola Solutions part number DSGXT4-1000RT120. The items are designated as critical application items with a 12-month extendable shelf life. Delivery is required within 60 days after order to the USS MARINETTE (LCS 25). Award will be based on the best value to the government, evaluating price, offered delivery, and past performance. The contract mandates strict adherence to military standards, including MIL-STD-2073-1E for packaging, MIL-STD-129 for marking, and RP001 for palletization. Because the items involve sealed lead acid batteries, the contractor must provide Material Safety Data Sheets per FED-STD-313 and comply with hazardous material shipping regulations under IP025. Quality assurance requires sampling according to MIL-STD-1916 or ASQ H1331, with a requirement for zero non-conformances in the sample lot. Additionally, the contractor must complete a CMMC Level 2 self-assessment and utilize the Wide Area WorkFlow system for all invoicing and receiving reports. Inspection and acceptance will occur at the point of origin.

POSTED

about 10 hours ago

DEADLINE

61--BATTERY,STORAGE

Solicitation # SPE7L7-26-T-5218

The Defense Logistics Agency, through DLA Land and Maritime, has issued solicitation SPE7L7-26-T-5218 as a Request for Quotations for three storage batteries, identified by NSN 6140017137559. This procurement is a total small business set-aside under NAICS 335910, with a response deadline of September 21, 2026. The required hardware must meet the specifications for East Penn Manufacturing Co. part number 18-G75-21EE IST6G08-NAV1 and is designated as a critical application item. The items have a non-extendable shelf life of 12 months and must be delivered to NAVSUP FLC Yokosuka in Japan within 20 days after receipt of order. The contract requires strict adherence to packaging and marking standards, including MIL-STD-2073-1E and MIL-STD-129, with specific labeling requirements for hazardous materials per the Hazard Communication Standard. Inspection and acceptance will occur at the destination. All quotes must be submitted electronically via the DIBBS system. The award process may utilize automated award and incorporates the HUBZone price evaluation preference. Compliance with various FAR and DFARS clauses is required, including those regarding cybersecurity safeguarding, the Berry Amendment, and the Buy American Act. Invoicing and payment must be processed through the Wide Area Workflow system.

Battery Manufacturing

POSTED

about 15 hours ago

DEADLINE

46--MODIFICATION KIT,WATER

Solicitation # SPE8E8-26-T-5568

Solicitation SPE8E8-26-T-5568 is a Request for Quotations issued by the Defense Logistics Agency Troop Support, Construction and Equipment office, for the procurement of two water treatment equipment modification kits under NSN 4610017148561. The requirement specifically references HDT Expeditionary Systems Inc part number T00012-5083-2. This is a total small business set-aside under NAICS 333310, with a response deadline of September 21, 2026. Delivery is required within 20 days after receipt of order, with the destination for inspection and acceptance located at Camp Pendleton, California. The procurement requires electronic submission of quotes via the DIBBS system. Contractors must adhere to strict packaging and marking standards, including ASTM D3951 and MIL-STD-129, and follow DLA packaging requirements RP001. Invoicing and payment must be processed through the Wide Area WorkFlow system. Key regulatory compliance includes the Buy American Act, the Berry Amendment, and DFARS cybersecurity requirements for safeguarding covered defense information. Notably, the use of additive manufacturing for the supplied parts is prohibited unless specifically authorized.

Commercial and Service Industry Machinery Manufacturing

POSTED

about 15 hours ago

DEADLINE

61--BATTERY,STORAGE

Solicitation # SPE7L7-26-Q-2412

The Defense Logistics Agency, through DLA Land and Maritime, has issued Request for Quotations SPE7L7-26-Q-2412 for the procurement of 100 nickel-cadmium wet storage batteries (NSN 6140-01-241-2296). These batteries are specified as wet, discharged, and spillable, with a non-extendable shelf life of 36 months. Approved sources include Aerodesign, Inc. (P/N AD-31004-04C) and Marathonnorco Aerospace, Inc. (P/N 31004-04C). The items are to be delivered to the Royal Saudi Air Force within 60 days after the order date. This is a fixed-price solicitation where award will be based on the best value to the government, evaluating technical conformity, past performance, and offered delivery time. Because the batteries are classified as corrosive materials (UN2795), the contractor must strictly adhere to hazardous materials regulations, including ICAO, IMDG, 49 CFR, and AFJMAN 24-204. Packaging must comply with MIL-STD-2073-1E Level B, Pack Code Q, using 4G fiber-board boxes. Inspection will be conducted by DCMA at the distributor or OEM site, with acceptance occurring at the origin. Administrative requirements include the use of the Wide Area WorkFlow system for electronic invoicing and receiving reports. The contract incorporates various FAR and DFARS clauses, including the Buy American and Balance of Payments Program and strict cybersecurity reporting requirements under DFARS 252.204-7012. Quotes must be submitted electronically by the deadline of September 17, 2026.

Battery Manufacturing

POSTED

about 15 hours ago

DEADLINE

53--ANODE,CORROSION PREVEN

Solicitation # SPE4A6-26-Q-1423

The Defense Logistics Agency is soliciting quotes for the procurement of six corrosion prevention anodes under National Stock Number 5342013978773. This requirement is identified by solicitation number SPE4A6-26-Q-1423 and is designated as a total small business set-aside under NAICS code 332994. The approved source for this item is 6RDX4 W3T106427. Items must be delivered to DLA Distribution San Joaquin within 190 days after the order is placed. Interested responsible sources must submit their electronic quotes by the deadline of September 21, 2026. The solicitation is available exclusively online via the DIBBS portal, as no hard copies or separate technical drawings are provided.

Small Arms, Ordnance, and Ordnance Accessories Manufacturing

POSTED

about 15 hours ago

DEADLINE

Supply of Fluid Pressure Regulating Valves (NSN 4820014623023)

Fluid Power Valve and Hose Fitting Manufacturing

POSTED

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 650+ contractors already using CLEATUS