This Combined Synopsis/Solicitation opportunity from Department Of Defense was posted on August 24, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

Electric Scissor Lift

Closed

W911S226U4145Federal

Submission Closed08/25/2026, 01:10:00 PM EDT

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

Solicitation # SPE2DH-27-T-0471

MEDICAL SUPPLY CHAIIN FSH

POSTED

DEADLINE

Automated Fluidized Bed Mixer Facility Modernization for end use at Pine Bluff Arsenal – CSO

Solicitation # W519TC26ACSO

The Army Contracting Command - Rock Island is seeking qualified vendors for the Automated Fluidized Bed Mixer Facility Modernization at Pine Bluff Arsenal under solicitation W519TC26ACSO. This Commercial Solution Opportunity (CSO) aims to replace legacy systems with an automated, high-precision mixing, granulation, and drying system to modernize colored smoke energetics production. The required system must handle mix batches between 800 and 1200 lbs and specifically address the hygroscopic nature of sugar and potassium chlorate to prevent clumping in humidity levels up to 95 percent. Key performance requirements include sub-millimeter granulation consistency and a maximum re-blend rate of 5.0 percent. Due to the hazardous nature of the materials, the solution must be compliant with Class I and II, Division 1 environments and include high-speed fire detection, suppression systems, and automated fail-safe shutdown protocols. This procurement is conducted as a streamlined acquisition under 10 U.S.C. 4022 and DFARS Subpart 212.70, treating all solutions as commercial items per FAR Part 12. The selection process consists of three phases: a Phase 1 Solution Brief, a Phase 2 Pitch, and a Phase 3 Full Quote. Evaluation criteria focus on technical merit, innovation, importance to agency operational readiness, and financial feasibility. The final award will be a Firm-Fixed-Price contract covering core equipment, de-clumping and transfer sub-systems, transportation, on-site installation, commissioning, and operator training. Phase 1 submissions are due by November 10, 2026, and must be submitted as unclassified electronic files to the designated points of contact.

POSTED

DEADLINE

Specialized Non-Destructive Testing (NDT) & FinishingThis subcontract for Specialized Non-Destructive Testing (NDT) and Finishing supports DLA Weapons Support Land Supplier Operations Vehicle Support. The selected contractor will perform critical characteristic verification and surface treatments for prime contractors, specifically conducting magnetic particle inspection, shot peening, and Rockwell hardness testing for RC 39-43. All work must adhere to surface quality standards per SS9208 para. 3.1 and calibration requirements per ANSI/NCSL Z540-1994, with final deliverables consisting of verified parts and detailed inspection reports. The opportunity is a total small business set-aside under NAICS code 333248, with performance located in Corpus Christi, Texas. Interested parties must respond by November 19, 2026. This project is managed by the Department of Defense to ensure the structural integrity and quality of critical weapon system components.

DLA WEAPONS SUPPORT LAND SUPPLIER OPNS VEHICLE SPT

POSTED

DEADLINE

Manufacturing of Internal Wrenching Bolts (NSN 5306011224689)This subcontract involves the manufacture and supply of 22 internal wrenching bolts (NSN 5306011224689) for the DLA Weapons Support ASC Commodities Division. The contractor must fabricate the bolts according to Part Number 965834-110 and Critical Application Item standards, ensuring all materials are Berry Amendment compliant. Quality assurance and sampling must be performed in accordance with MIL-STD-1916 or ASQ H1331, and the contractor is required to maintain a CMMC Level 2 self-assessment. Final products must be packaged per ASTM D3951 and MIL-STD-129 for delivery to DLA Distribution Warner Robins, Georgia. The project falls under NAICS code 333248, with a response deadline of November 13, 2026.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

Total Small Business Set Aside for Brand Name: High Purity Northwest (2) Thermo-Vac Vacuum Dehydrator & Filtration Systems and (2) Laser Particle Counter with ISO Codes & Water Content Displays

Solicitation # N61331-27-Q-TR07

The Naval Surface Warfare Center is soliciting a Total Small Business Set-Aside for the procurement of specialized oil purification and analysis equipment for the LCAC100 class hovercraft. The requirement consists of two High Purity Northwest Thermo-Vac Vacuum Dehydrator and Filtration Systems and two Laser Particle Counters with ISO Codes and Water Content Displays. The equipment must meet specific technical standards, including a consistent 5 GPM process flow rate and a 50-torr vacuum pump configuration with a rotary claw to remove free, emulsified, and dissolved water from synthetic lubricants. Award will be determined on a Best Value basis, evaluating price, delivery schedule, quality, and past performance via the Supplier Performance Risk System. Quotes must be submitted in PDF format on company letterhead to Terra Roberts by the deadline, including the offeror's CAGE code, delivery lead times, and detailed technical specifications. Payment terms are NET 30 days processed through the Wide Area Workflow system. Deliveries to Panama City Beach, Florida, must be made Monday through Friday between 0900 and 1430. The contract is a fixed-price commercial item procurement incorporating various FAR and DFARS clauses regarding cybersecurity, Buy American requirements, and item unique identification.

Naval Surface Warfare Center

POSTED

DEADLINE

TECHNOLOGY LICENSING OPPORTUNITY: GasFlow DLP Printing Interface

Solicitation # S-133794

The GasFlow DLP Printing Interface, developed by Los Alamos National Laboratory, is a patented technology designed to enhance resin-based 3D printing processes such as DLP and SLA. The system utilizes a circulation mechanism that introduces an immiscible, high-density perfluorinated fluid treated with inert gas beneath the printable resin. This creates a stable fluid-fluid interface that removes oxygen from the curing zone, significantly reducing oxygen inhibition. As a result, the technology enables the production of finer details, specifically features below 50 microns, increases print speeds by at least one-third, and improves overall part consistency and material flexibility. This technology is currently at TRL 4 and is available for exclusive or non-exclusive licensing to companies in sectors including additive manufacturing, medical and dental fabrication, electronics, and aerospace. Beyond improving resolution and speed, the system offers temperature control to manage heat buildup and extend resin lifetime. Interested parties can contact the Department of Energy contractor, Triad, regarding this licensing opportunity, which is listed under solicitation number S-133794 with a response deadline of April 6, 2027.

Triad - DOE Contractor

POSTED

DEADLINE

Стенд для перевірки форсунок системи Common Rail , відповідний код ДК 021-2015-34328000-2 - Випробувальні стенди, набори для переобладнання автомобіля та паси безпеки

Solicitation # UA-2026-11-06-004948-a

The Government of Ukraine, specifically the State Educational Institution Kovel Center for Professional and Technical Education, is soliciting bids for the procurement of a Common Rail fuel injector testing stand. This project is co-financed by the European Union through the Ukraine Facility and falls under the classification for testing stands and vehicle conversion kits. The solicitation, identified by number UA-2026-11-06-004948-a, was posted on November 6, 2026, with a response deadline set for November 22, 2026. The equipment will be utilized in Kovel, Volyn region, and interested parties can coordinate through the primary point of contact, Olga Yevhenivna Dryhulia.

ДЕРЖАВНИЙ НАВЧАЛЬНИЙ ЗАКЛАД "КОВЕЛЬСЬКИЙ ЦЕНТР ПРОФЕСІЙНО-ТЕХНІЧНОЇ ОСВІТИ"

POSTED

DEADLINE

ДК 021:2015: 42990000-2-Машини спеціального призначення різні (обладнання первинної очистки)

Solicitation # UA-2026-11-05-011995-a

PrJSC AK Kyivvodokanal is conducting a procurement process for various special purpose machinery, specifically primary treatment equipment. This solicitation, identified by number UA-2026-11-05-011995-a, is funded through the organization's own resources. The tender is open to legal entities and business entities operating in specific economic spheres as defined by Ukrainian law. The selection process is based entirely on a price criterion, which carries a weight of 100 percent. All tender proposals must be submitted in the Ukrainian language. The deadline for responses is November 23, 2026, at 14:00 UTC. Performance of the contract will take place in Ukraine according to the provided documentation.

ПРИВАТНЕ АКЦІОНЕРНЕ ТОВАРИСТВО "АКЦІОНЕРНА КОМПАНІЯ "КИЇВВОДОКАНАЛ"

POSTED

DEADLINE

TTC Equipment Purchase; Passenger-Rail Service Building Wheel-Turing MachineThe Department of Transportation is forecasting the purchase of a Wheel-Truing Machine for the Passenger-Rail Service Building at the TTC. This equipment is designated as critical for the ongoing repairs, operations, and maintenance of railroad equipment, which directly supports essential research and development activities. The procurement is categorized under NAICS code 333248 and was posted on November 4, 2026. Interested parties may coordinate with the FRA APMO Team or the designated Small Business Specialist for further information regarding this requirement.

POSTED

DEADLINE

Paper Shredding Machine SupplyThis subcontract, issued by the Department of Defense under the DLA Weapons Support Nuclear Reactor Program, involves the sourcing and manufacture of industrial-grade paper shredding machines. The equipment must strictly adhere to NSN 3615016124024 specifications and be delivered to the facility located in New Cumberland, Pennsylvania. To ensure compliance with federal standards, all equipment must be packaged according to RP001 DLA Packaging Requirements and marked in accordance with MIL-STD-129. The opportunity is designated as a Women-Owned Small Business set-aside under NAICS code 333248. Interested parties must have submitted their responses by the deadline of November 16, 2026. This contract serves prime contractors on DLA supply contracts to ensure the delivery of specialized shredding machinery to the specified government location.

DLA WEAPONS SUPPORT NUCLEAR REACTOR PROGRAM

POSTED

DEADLINE

Supply of Shaft Coupling Halves (NSN 3010-01-569-6036)This subcontract involves the supply of 18 shaft coupling halves to prime contractors supporting the Defense Logistics Agency Weapons Support Land Supply Chain. The required components must match HDT Expeditionary Systems Inc part number 41213-SV and National Stock Number 3010-01-569-6036. Performance of the contract will take place in New Cumberland, Pennsylvania, under NAICS code 333248. The contractor is responsible for manufacturing or sourcing the parts while ensuring strict adherence to DFARS 252.225-7001 Buy American standards. All items must be packaged according to ASTM D3951 and marked for shipment in compliance with MIL-STD-129. The solicitation was posted on November 4, 2026, with a response deadline of November 16, 2026.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

DEADLINE

Машини для виробництва текстильних виробів

Solicitation # UA-2026-11-01-000156-a

Khmelnytskyi National University, acting under the Government of Ukraine, has issued a solicitation for the procurement of textile production machinery. The tender, identified by solicitation number UA-2026-11-01-000156-a, was posted on November 1, 2026, with a response deadline set for November 16, 2026. The performance of the contract will take place in Khmelnytskyi, Ukraine. A critical requirement for all bidders is that the price of the tender proposal must not exceed the expected value of the procurement item as specified in the open bidding announcement. Any proposal with a price higher than the customer's determined expected value will be automatically rejected and not considered for review. Interested parties may contact Tetiana Ivanivna Katkova for further information.

Хмельницький національний університет

POSTED

9 days ago

DEADLINE

in 7 days

AI Contract Overview

Solicitation W911S226U4145, issued by the Department of Defense via W6QM Micc-Ft Drum, is a combined contract for the procurement of an electric scissor lift. This requirement is designated as a total small business set-aside under NAICS code 333248. The equipment must feature a 24V DC battery system, E-Drive, 2WD, solid non-marking tires, and a 500lbs lift capacity with a total weight of 4822lbs. Additional specifications include a deck extension, folding rails with a height swing gate, spill guard, dual flashing LED beacons, pothole protection, a 110V-AC platform receptacle, and SmartLink DualZone controls compatible with Tech Pro Link. Amendment 0002 updated the contract to include specific maximum working height and machine width requirements. The successful contractor is responsible for the delivery of the equipment. The primary point of contact for this acquisition is Cory Ponder, and the performance is associated with the Department of Defense office located in Fort Drum, New York.

General Info

DoD small business set-aside for electric scissor lift procurement due August 25, 2026.

Agency

Department Of Defense → W6QM Micc-Ft Drum

NAICS

333248 - All Other Industrial Machinery Manufacturing

Place of Performance

NWJRCF ACCBLDG 20000 Alder RDJoint Base Lewis McChord WA 98433, NY, 98433

Set-Aside

SBA

Documents

8 pages · rfq

High

8 pages · rfq

High

rfq

High

AI Contract Breakdown

Uniform Contract Format

Contract not broken down yet

CLEATUS splits the solicitation into Uniform Contract Format (UCF) sections: scope, pricing, deliverables, and evaluation criteria.

Timeline

2 updates

PhaseClosed

PostedAug 18

Combined Synopsis

Notice updatedAug 19

Set-aside added: Small Business Set Aside - Total. The notice description changed.

Notice updatedAug 24

The notice description changed.

Response DeadlineAug 25

Deadline has passed

Submission Closed

08/25/2026, 01:10:00 PM EDT

Find active opportunities like this

Get full access to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyDepartment Of Defense → W6QM Micc-Ft Drum

Contacts1 person available

OfficeFORT DRUM, NY, 13602-5220, USA

Organization / AgencyDepartment Of Defense → W6QM Micc-Ft Drum

Office AddressFORT DRUM, NY, 13602-5220, USA

Contacts

Cory Ponder

contact@example.gov

+1 (555) 000-0000

Full Description

amendment 0002 to add maximum working height and machine width requirements. amended to include set aside code. Electric Scissor Lift. 24V DC (Batteries), E-Drive, 2WD, Solid Non-Marking Tires, Deck-Extension, Folding Rails w/ Height Swing Gate, Spill Guard, Dual Flashing LEDBeacons, Pothole Protection, 110V-AC Receptacle Power to Platform, SmartLink DualZone Controls for Indoor/Outdoor Use, Tech Pro Link Compatible, 500lbs Lift Capacity,Weighs 4822lbs. Must include delivery