Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

Electrical and Power System Integration

Active

Federal

Response Deadline08/26/2026, 06:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract requires full electrical integration of a sterilizer system, encompassing power supply connections, proper grounding, control circuit wiring, and seamless coordination with existing facility power infrastructure to ensure safe and compliant operation. All work must meet industry standards for medical equipment installation and align with the facility’s electrical specifications to prevent interference, ensure uptime, and support regulatory requirements for sterilization processes. This is a Small Business Set Aside subcontract under NAICS code 238210, issued by the USDA Agricultural Research Service’s Agricultural Facilities Management and Planning Division, with performance location in Sidney, Montana, 59270. The opportunity was posted on August 6, 2026, and responses are due by August 26, 2026, at 6:00 PM. The scope demands technical expertise in both electrical systems and medical device installation, with an emphasis on reliability, safety, and compatibility with broader utility systems at the site.

General Info

Electrical integration of sterilizer system per medical standards, USDA subcontract, Sidney, Montana, due August 26, 2026.

Agency

Department Of Agriculture → USDA Ars Afm ApdView Agency

NAICS

238210 - Electrical Contractors and Other Wiring Installation ContractorsView NAICS

Place of Performance

Sidney, MT, 59270, USA

Set-Aside

SBA

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedAug 6

subcontract

Response DeadlineAug 26

Submission deadline

Response Deadline

08/26/2026, 06:00:00 PM UTCin 19 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Agriculture → USDA Ars Afm Apd

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Agriculture → USDA Ars Afm Apd

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Electrical connection of the sterilizer including power supply, grounding, control circuits, and coordination with facility power systems.

Similar Contracts

Same NAICS industry code

Electrical Installation and Wiring Services

California Department of Veterans Affairs

POSTED

about 10 hours ago

DEADLINE

Electrical Installation and Wiring

0P100MHDOFFOFSCTY - Office of the Secretary

POSTED

about 10 hours ago

DEADLINE

Manhole Rehabilitation and GroutingSAK Construction, LLC is seeking qualified small businesses to perform structural repairs and sealing of manholes through grouting, lining, or patching techniques to prevent infiltration and avoid structural failure. The contract is classified as a subcontract under the Small Business Administration set-aside program and is reserved for Small Business, Small Disadvantaged Business, Women-Owned Small Business, Veteran-Owned Small Business, Alaskan Native Corporation or Indian Tribe, and Disadvantaged Business Enterprise participants under the Department of Transportation guidelines. The North American Industry Classification System code for this work is 238210, indicating it falls under the plumbing, heating, and air-conditioning contracting sector. The opportunity was posted on August 7, 2026, with a response deadline of September 10, 2026, and the work is expected to take place in the Memphis, Tennessee area, specifically along Humphreys Boulevard as part of the SARP10 program. Applicants must be certified under one of the specified small business categories and prepared to meet the technical requirements for manhole rehabilitation using industry-standard methods to ensure long-term integrity and compliance with municipal infrastructure standards.

SAK Construction, LLC

POSTED

about 11 hours ago

DEADLINE

in about 1 month

RFO AWP-0772-00, HNL Fiber Optic Transmission System (FOTS) Design Support and Construction in Honolulu, HI

Solicitation # rfo-awp-0772-00-hnl-fiber-optic-transmission-system-fots-design-support-construction-honolulu-hi-0

The contract calls for the installation of a new Fiber Optic Transmission System at Daniel K. Inouye International Airport in Honolulu, Hawaii, to be completed in two phases with conduit trenching and boring connecting three key buildings. The project falls under the NAICS codes 238210, 237130, and 237990, indicating work involving specialty trade contracting, telecommunications, and other heavy and civil engineering construction. The anticipated value of the construction work ranges between $1 million and $5 million. The solicitation is set aside for small business concerns including Small Disadvantaged Businesses, Women-Owned Small Businesses, HUBZone Small Businesses, Veteran-Owned Small Businesses, and Service-Disabled Veteran-Owned Small Businesses. Responses are due by August 15, 2026, and inquiries should be directed to Anna Ma, Subcontract Administrator at Parsons, via email at anna.t-ctr.ma@faa.gov or by phone at 360-204-4418. The agency managing this solicitation is PTSI Managed Services, Inc., with all work to be performed in Hawaii.

PTSI Managed Services, Inc.

POSTED

about 11 hours ago

DEADLINE

RFO AWP-0772-00, HNL Fiber Optic Transmission System (FOTS) Design Support and Construction in Honolulu, HI

Solicitation # rfo-awp-0772-00-hnl-fiber-optic-transmission-system-fots-design-support-construction-honolulu-hi

The contract involves the installation of a new Fiber Optic Transmission System (FOTS) at Daniel K. Inouye International Airport in Honolulu, Hawaii, executed in two phases and including conduit trenching and boring between three buildings. The work falls under NAICS codes 238210, 237130, and 237990 and has a construction magnitude estimated between one and five million dollars. The solicitation is set aside for small business concerns, including Small Disadvantaged Businesses, Women-Owned Small Businesses, HUBZone Small Businesses, Veteran-Owned Small Businesses, and Service-Disabled Veteran-Owned Small Businesses. The solicitation number is RFO AWP-0772-00, posted on August 7, 2026, with responses due by August 15, 2026. The contracting agency is PTSI Managed Services, Inc., and inquiries must be directed to Anna Ma, Subcontract Administrator, at anna.t-ctr.ma@faa.gov or by phone at 360-204-4418. Performance of the work is located exclusively in Hawaii.

PTSI Managed Services, Inc.

POSTED

about 11 hours ago

DEADLINE

Replacement Fiber Line

Solicitation # Replacement Fiber Line

The contract involves the replacement of existing multimode fiber optic cabling with 12-strand single-mode fiber optic cabling to establish a secure and high-capacity network connection between Building 2436 and Building 2443 at the Earle C. Clements Job Corps Center in Morganfield, Kentucky. The work includes the removal of all retired multimode aerial fiber lines and splice boxes from utility poles and the installation of new 12-strand OS2 single-mode fiber using Center-owned utility poles, terminating at the Building 2436 MDF and Building 2443 IDF. All labor, equipment, and tools necessary for execution must be furnished by the contractor, along with specified hardware components such as Belden FS3L0024NS fiber cable, ECX-01U rack-mounted enclosures, FFSX12LD adapter panels, and FTSLC900FS01 LC connectors, or approved equivalents. SFPs are to be supplied by Job Corps. The contractor must comply with strict quality standards, ensuring all materials and workmanship are merchantable, defect-free, and conform to MTC specifications. Inspection rights are reserved by MTC or government representatives at all reasonable times, with final acceptance occurring upon delivery at the designated point regardless of prior inspection or payment. The solicitation is issued as a fee-for-service contract with a lump sum pricing structure under the NAICS code 238210, set aside exclusively for small business categories including Small Business, Small Disadvantaged Business, Women-Owned Small Business, HUBZone, Veteran-Owned, and Service-Disabled Veteran-Owned Small Business. Bidders must self-certify their size and status and provide a Unique Entity Identifier, tax ID, and DUNS number. First-tier subcontractors exceeding $30,000 must disclose any debarment status and comply with FAR 52.209-6. The contractor must adhere to Service Contract Labor Standards with Wage Determination 2015-4687 (Rev 31), pay prevailing wages, and ensure compliance with the Contract Work Hours and Safety Standards Act. Insurance requirements include $1 million per occurrence and $3 million aggregate general liability, $1 million auto coverage, and $500,000 workers’ compensation, with MTC listed as an additional insured. The contractor must indemnify MTC for all liabilities arising from performance, violations of law, or breach of contract, and

Earle C. Clements Job Corps Center

POSTED

about 11 hours ago

DEADLINE

AEA-0536, VORTAC (ART) Doppler Conversion, Watertown, NY

Solicitation # aea-0536-vortac-art-doppler-conversion-watertown-ny

The FAA is upgrading an existing VHF Omnidirectional Range (VOR) facility in Watertown, New York, to a modern Doppler VORTAC system with an offset TACAN, requiring the complete demolition of the current infrastructure. The new Doppler VORTAC will be constructed on-site with a 37’x37’ steel building featuring a 60-foot diameter counterpoise integrated into the roof, along with full foundations, site preparation, and utility connections. Alongside the main VORTAC structure, an offset TACAN component will be installed as a standalone steel tower measuring 16’x16’x20’H, supported by its own foundations, site works, and utilities. The project is solicited under contract number AEA-0536 with a response deadline of August 28, 2026, and is set aside exclusively for small business concerns including Small Disadvantaged Businesses, Women-Owned Small Businesses, HUBZone, Veteran-Owned, and Service-Disabled Veteran-Owned Small Businesses. The contracting entity is PTSI Managed Services, Inc. (Parsons), and all inquiries should be directed to Angela Stydinger of the FAA.

PTSI Managed Services, Inc (Parsons)

POSTED

about 11 hours ago

DEADLINE

Electrical and Lighting Installation

Texas Department of Transportation

POSTED

about 11 hours ago

DEADLINE

Pedestrian Lighting and Electrical Systems

Texas Department of Transportation

POSTED

about 11 hours ago

DEADLINE

Traffic Signal and Lighting Installation

Texas Department of Transportation

POSTED

about 11 hours ago

DEADLINE

Traffic Signal and Electrical Installation

Texas Department of Transportation

POSTED

about 11 hours ago

DEADLINE

Traffic Control and Signage Installation

Texas Department of Transportation

POSTED

about 11 hours ago

DEADLINE

More opportunities from Department Of Agriculture → USDA Ars Afm Apd

Same awarding agency

Operator Training and DocumentationThis contract entails comprehensive on-site operator orientation, safety training, and maintenance instruction for all equipment components, ensuring personnel are fully prepared to operate and service the systems effectively. The scope includes the delivery of technical manuals and warranty documents to support ongoing use and compliance. Training will be conducted at the place of performance located in Byron, Georgia, with a zip code of 31008. The solicitation falls under NAICS code 611430, which classifies it as a subcontract for other business support services. The opportunity was posted on August 7, 2026, and responses are due by August 17, 2026, at 7:00 PM. The contracting agency is the USDAARS AFM APD under the U.S. Department of Agriculture, though no specific point of contact or set-aside details are provided. All activities must be completed in accordance with the specified location and deliverables outlined in the terms.

Professional and Management Development Training

POSTED

about 15 hours ago

DEADLINE

Equipment Integration, Testing, and DeliveryThe contract involves the final assembly, hydraulic and PTO integration, operational testing, and delivery of a complete equipment package to Byron, Georgia, with requirements for on-site setup and verification to ensure full functionality. All work must be completed and validated at the specified delivery location, emphasizing precision in integration and rigorous testing to meet operational standards. The procurement is structured as a subcontract under NAICS code 811310, associated with the USDA ARS AFM APD agency, and targets a specific technical scope requiring specialized expertise in equipment integration and field deployment. Responses to this solicitation are due by August 17, 2026, at 7:00 PM, with the posting date listed as August 7, 2026. The place of performance is strictly limited to Byron, GA, with a zip code of 31008, and no alternative delivery or setup locations are authorized. While no set-aside type or point of contact is provided, the nature of the work implies a need for qualified subcontractors with demonstrated capabilities in agricultural equipment systems, hydraulic integration, and post-installation verification under field conditions. Failure to meet the specified integration and testing criteria may result in rejection or non-compliance.

Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and Maintenance

POSTED

about 15 hours ago

DEADLINE

Flex Wing Rotary Cutter Supply (FC20M)The contract entails the supply of a new FC20M flex wing rotary cutter designed for mowing and vegetation management, with all necessary components including a PTO shaft and safety shields fully integrated to ensure field readiness upon delivery. The equipment is intended for use in agricultural and land management operations and must meet technical and safety standards to support effective and safe operation in diverse terrain conditions. Delivery and installation are to be completed at the specified place of performance in Byron, Georgia, with the equipment required to be fully functional and prepped for immediate field deployment. The solicitation is issued as a subcontract under the USDA ARS AFM APD, with the NAICS code 333111 indicating classification within agricultural, construction, and mining machinery manufacturing. The opportunity was posted on August 7, 2026, and responses are due by August 17, 2026, at 7:00 PM Eastern Time. No set-aside designation or agency-specific procurement restrictions are noted, and the contract does not include a designated point of contact. Interested parties must submit proposals through the official SAM.gov portal before the deadline to be considered for award.

Farm Machinery and Equipment Manufacturing

POSTED

about 15 hours ago

DEADLINE

Root Rake Grapple Supply (AV57G-84)The contract pertains to the supply of a new AV57G-84 root rake grapple attachment designed specifically for orchard and pecan farm cleanup operations, ensuring compatibility with the 540M loader model. The scope includes all necessary mounting hardware and comprehensive safety instructions to facilitate proper installation and safe usage in agricultural environments. The equipment is intended to improve efficiency in debris removal and tree maintenance tasks common in these farming settings. Performance of this subcontract is required to occur in Byron, Georgia, with the ZIP code 31008 as the designated place of performance. The solicitation falls under NAICS code 332420, classifying it within the Industrial Machinery Manufacturing sector, and is structured as a subcontract with no set-aside designation. The posting date is August 7, 2026, and responses must be submitted no later than August 17, 2026, at 7:00 PM Eastern Time. The contracting entity is the USDA Agricultural Research Service, Agricultural Facilities and Property Division, operating under the U.S. Department of Agriculture. There is no designated point of contact provided, and the full details can be accessed through the SAM.gov workspace link associated with the opportunity.

Metal Tank (Heavy Gauge) Manufacturing

POSTED

about 15 hours ago

DEADLINE

Front-End Loader Supply (John Deere 540M)The contract entails the supply of a new John Deere 540M front-end loader designed for seamless integration with the 5105ML tractor, ensuring full operational compatibility. The scope includes all necessary hydraulic linkage components, safety guards, and mandatory OEM compliance to meet manufacturer specifications and performance standards. The equipment must be delivered in accordance with original equipment manufacturer requirements to guarantee reliability, safety, and warranty validity. The solicitation is classified as a subcontract under NAICS code 333120 and is managed by the USDA ARS AFM APD, with the place of performance located in Byron, Georgia, ZIP 31008. The opportunity was posted on August 7, 2026, and responses are due by August 17, 2026, at 7:00 PM. Interested parties must submit proposals prior to the deadline to be considered.

Construction Machinery Manufacturing

POSTED

about 15 hours ago

DEADLINE

Utility Tractor Supply (John Deere 5105ML)The contract entails the supply of a new, low-profile John Deere 5105ML utility tractor that is fully assembled and fully compliant with the original equipment manufacturer’s specifications. The tractor must be delivered in accordance with all required standards and accompanied by the necessary certifications to ensure operational readiness and regulatory compliance. The item is intended for use by the USDA ARS AFM APD, with performance obligated at Byron, Georgia, zip code 31008. The solicitation is classified as a subcontract under NAICS code 333111, which pertains to agricultural machinery and equipment manufacturing. The opportunity was posted on August 7, 2026, and responses are due by August 17, 2026, at 7:00 PM Eastern Time. The contract does not specify a set-aside type or an assigned point of contact, and no additional agency details beyond the department name and location are provided.

Farm Machinery and Equipment Manufacturing

POSTED

about 15 hours ago

DEADLINE

Low profile tractor with accessories

Solicitation # 1232SA26Q1240

The contract is for a low profile tractor with accessories, solicited under number 1232SA26Q1240, posted on August 7, 2026, with a response deadline of August 17, 2026, at 7:00 PM Eastern Time. It is a combined solicitation with no set aside, meaning it is open to all eligible businesses regardless of size or category, and falls under the NAICS code 333111, which corresponds to the manufacturing of tractors and farm machinery. The contracting activity is led by the USDA ARS APM APD, a division of the U.S. Department of Agriculture, located in Beltsville, Maryland, with the performance location specified as Byron, Georgia, ZIP code 31008. Primary point of contact for inquiries is Kristine Stout, reachable at kristine.stout@usda.gov. All proposals must be submitted through the SAM.gov portal linked in the posting, and the requirement is for a tractor designed with a low profile and associated accessories suitable for specific operational needs in the designated area.

Farm Machinery and Equipment Manufacturing

POSTED

about 15 hours ago

DEADLINE

Greenhouse Environmental Control and Drip Irrigation Installation - Lubbock, TX

Solicitation # 1232SA26Q1236

The solicitation for greenhouse environmental control and drip irrigation installation in Lubbock, Texas, is issued as a combined synopsis and request for quotation under FAR Part 12, with no separate written solicitation to be provided. The contract requires the installation of environmental controls, an automated drip irrigation system, a new cooling system, and a bug exclusion system for two Jaderloon Classic Gutter Greenhouses. This acquisition is a total small business set-aside under NAICS code 221310 for Water Supply and Irrigation Systems, with a small business size standard of $41 million. Only qualified small businesses may respond, and all responsible sources are encouraged to submit quotations. A mandatory site visit is required to receive a technically acceptable proposal, and failure to complete the visit will result in disqualification. The response deadline is August 27, 2026, at 10:00 PM Eastern Time, with the solicitation posted on August 7, 2026. The contracting office is the USDA Agricultural Research Service, located in Beltsville, Maryland, though all work must be performed at the Lubbock, Texas site. Primary point of contact for inquiries is David Hildebrand, reachable via email at david.hildebrand@usda.gov. All submissions must be directed through the SAM.gov platform using the provided UI link, and no alternative submission methods will be accepted.

Water Supply and Irrigation Systems

POSTED

about 15 hours ago

DEADLINE

STERIS Total Care Service Contract

Solicitation # 1232SA26Q1214

The USDA Agricultural Research Service, via the Office of the Assistant Secretary for Administration in Beltsville, Maryland, is soliciting quotations for the STERIS Total Care Service Contract under solicitation number 1232SA26Q1214, which is issued as a combined synopsis and solicitation in accordance with FAR Part 12. This requirement is set aside exclusively for small business concerns and falls under the North American Industry Classification System code 811210 for Electronic and Precision Equipment Repair. The contract encompasses one base year with four additional option years, providing long-term service support for Steris equipment. All responsible sources are invited to submit quotations, and no separate written solicitation will be issued. The response deadline is August 14, 2026, at 3:00 PM Eastern Time, and all submissions must be received by this time to be considered. The point of contact for this procurement is Kelly Wright, reachable via email at kelly.wright@usda.gov. The place of performance details are not specified but will likely align with the agency’s operational needs in Maryland. The acquisition is classified as unrestricted in terms of sourcing eligibility within the small business set-aside, meaning any qualified small business may respond. The contract opportunity is publicly available through the SAM.gov portal, and interested parties are encouraged to review the posting for any additional submission instructions or requirements not detailed in the announcement.

Electronic and Precision Equipment Repair and Maintenance

POSTED

about 15 hours ago

DEADLINE

Site Inspection and Compliance CoordinationThe contract titled Site Inspection and Compliance Coordination is a Small Business Set Aside under the SBA program, classified under NAICS code 541330, and is structured as a subcontract. It requires the contractor to coordinate a mandatory site visit and ensure all work performed fully complies with the safety, access, and compliance policies established by the USDA Agricultural Research Service. The place of performance is located in Sidney, Montana, with a zip code of 59270. The solicitation was posted on August 6, 2026, and responses are due by August 26, 2026, at 6:00 PM. The contracting agency is the USDA ARS AFM APD, under the Department of Agriculture, and no specific point of contact is listed. This engagement demands strict adherence to federal standards, with all activities tied directly to the operational requirements of the USDA ARS facility in Sidney.

Engineering Services

POSTED

DEADLINE

Technician Services for Commissioning and TrainingA subcontract has been issued under a Small Business Set Aside for technical services related to the commissioning and training of a new sterilizer system at a facility in Sidney, Montana, with a ZIP code of 59270. The scope of work includes on-site installation, operational testing, troubleshooting, and comprehensive training for facility staff on the proper use, daily operations, and routine maintenance of the equipment. This effort is being conducted under NAICS code 811212, indicating classification within the medical and diagnostic laboratory industry, and is being managed by the USDA Agricultural Research Service, Agricultural Facilities and Maintenance Project Division. Interested parties must submit responses by August 26, 2026, at 6:00 PM, following the posted solicitation on August 6, 2026, with all performance activities centered exclusively at the Sidney location.

Computer and Office Machine Repair and Maintenance

POSTED

DEADLINE

Mechanical and Plumbing Installation ServicesThe contract encompasses the full mechanical and plumbing installation of a new sterilizer system, requiring adherence to both manufacturer specifications and ARS design standards. This includes the integration of steam lines, plumbing connections, condensate drainage systems, and all necessary utility hookups to ensure safe and efficient operation. The work must be performed in compliance with industry best practices and regulatory requirements specific to sterilization equipment in a controlled environment. This is a Small Business Set Aside subcontract under NAICS code 238220, awarded by the USDA Agricultural Research Service through its AFM APD office. The opportunity was posted on August 6, 2026, with a response deadline of August 26, 2026, and work is to be performed at the facility in Sidney, Montana, ZIP code 59270. All submissions and compliance efforts must align with the Federal Acquisition Regulation framework applicable to small business subcontractors, and the contractor is expected to manage all aspects of installation, testing, and commissioning without reliance on third-party vendors for core system integration.

Plumbing, Heating, and Air-Conditioning Contractors

POSTED

DEADLINE