Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

Mechanical and Plumbing Installation Services

Active

Federal

Response Deadline08/26/2026, 06:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract encompasses the full mechanical and plumbing installation of a new sterilizer system, requiring adherence to both manufacturer specifications and ARS design standards. This includes the integration of steam lines, plumbing connections, condensate drainage systems, and all necessary utility hookups to ensure safe and efficient operation. The work must be performed in compliance with industry best practices and regulatory requirements specific to sterilization equipment in a controlled environment. This is a Small Business Set Aside subcontract under NAICS code 238220, awarded by the USDA Agricultural Research Service through its AFM APD office. The opportunity was posted on August 6, 2026, with a response deadline of August 26, 2026, and work is to be performed at the facility in Sidney, Montana, ZIP code 59270. All submissions and compliance efforts must align with the Federal Acquisition Regulation framework applicable to small business subcontractors, and the contractor is expected to manage all aspects of installation, testing, and commissioning without reliance on third-party vendors for core system integration.

General Info

Small business subcontract to install sterilizer system per ARS standards in Sidney, Montana, under FAR.

Agency

Department Of Agriculture → USDA Ars Afm ApdView Agency

NAICS

238220 - Plumbing, Heating, and Air-Conditioning ContractorsView NAICS

Place of Performance

Sidney, MT, 59270, USA

Set-Aside

SBA

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedAug 6

subcontract

Response DeadlineAug 26

Submission deadline

Response Deadline

08/26/2026, 06:00:00 PM UTCin 19 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Agriculture → USDA Ars Afm Apd

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Agriculture → USDA Ars Afm Apd

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Installation of the new sterilizer including plumbing, steam lines, condensate drains, and utility connections per manufacturer and ARS design standards.

Similar Contracts

Same NAICS industry code

Fire Alarm System Diagnostic and Repair ServicesALCORN STATE UNIVERSITY is seeking qualified contractors to provide comprehensive fire alarm system diagnostic and repair services across its campus facilities. The scope of work includes inspection, troubleshooting, repair, and routine maintenance of all fire alarm components such as control panels, smoke and heat detectors, manual pull stations, notification appliances, and associated electrical wiring. Contractors must be prepared to respond to system malfunctions, perform preventive maintenance, and ensure all equipment complies with applicable fire safety codes and standards. The contract is structured as a subcontract and is classified under NAICS code 238220 for electrical and other construction installation contractors. Solicitations are open with a response deadline of August 31, 2026, and the services are expected to be performed at various locations within the university’s campus in Mississippi.

ALCORN STATE UNIVERSITY

POSTED

about 9 hours ago

DEADLINE

Plumbing and Piping Systems Installation

California Department of Veterans Affairs

POSTED

about 10 hours ago

DEADLINE

HVAC System Installation

0P100MHDOFFOFSCTY - Office of the Secretary

POSTED

about 10 hours ago

DEADLINE

Plumbing and Piping Systems

0P100MHDOFFOFSCTY - Office of the Secretary

POSTED

about 10 hours ago

DEADLINE

ESJC – FIRE EXTINGUISHER SERVICES

Solicitation # esjc-fire-extinguisher-services

This solicitation is for fire extinguisher inspection and servicing services at the Excelsior Springs Job Corps Center in Missouri, issued as a subcontracting opportunity by Education & Training Resources. The contract requires quarterly inspections of 175 fire extinguishers across 22 campus buildings and center-owned vehicles, with replacement of used or uncharged units as needed. Each extinguisher must be tagged with an inspection label, and all work must comply with the current National Electrical Code and NFPA 101, Life Safety Code, along with applicable OSHA regulations and local, state, and federal building codes. The period of performance runs from October 1, 2026, through September 31, 2027, with services scheduled four times per year. Bids must be submitted by 12 p.m. CST on August 14, 2026, and must include a completed Bid Sheet with a detailed cost breakdown, Missouri-specific licensing, vendor acknowledgment form, Form W-9, FFATA Notice, Anti-Lobbying Certification, certificates of insurance, and a proposed service schedule. All responses are evaluated based on best overall value, not merely lowest price, and failure to meet any mandatory requirements will result in disqualification. The contract is set aside for small business concerns, including small disadvantaged, women-owned, HUBZone, veteran-owned, and service-disabled veteran-owned small businesses, under NAICS code 238220. The winning bidder must maintain an active SAM.gov registration with a Unique Entity ID and comply with federal labor standards including the Service Contract Act, Minimum Wage requirements under Executive Order 14026, and FAR-certified clauses regarding debarment, anti-lobbying, and information dissemination. Safety and conduct rules prohibit fraternization with students or staff, consumption of alcohol, drugs, tobacco, or firearms on-site, and require adherence to center security policies. Bonding is required based on contract value: a 100% payment bond for projects exceeding $35,000 but not surpassing $150,000, and both performance and payment bonds for contracts over $150,000. Insurance coverage for builders risk, automobile, liability, and workers compensation must be provided. Payment is due within 30 days of invoicing, and all deliverables are F.O.B. destination with final acceptance conducted by the center. Technical coordination is handled by William Boucher, while procurement inquiries should

ETR/Excelsior Springs Job Corps

POSTED

about 11 hours ago

DEADLINE

Boiler replacement in IOOF and Administration

Solicitation # boiler-replacement-ioof-administration

The contract seeks a licensed HVAC contractor to replace three boilers across two buildings at the Flint Hills Job Corps Center in Manhattan, Kansas—specifically, two existing Peerless gas-fired boilers in Building 1 (IOOF) and one new high-efficiency gas-fired boiler in Building 2 (Administrative/Academic). The project requires the installation of boilers with specified input and output capacities: 1,680,000 B.T.U. input and 1,344,000 B.T.U. output for the IOOF boilers and a 600,000 B.T.U. input, 572,000 B.T.U. output, 94% Energy Star-rated boiler for the administrative building. Commissioning of the boiler control systems by a qualified agent is mandatory, along with the submission of comprehensive documentation including inspection reports, test results, warranties, commissioning reports, and operations and maintenance manuals. All work must comply with applicable Kansas state codes including NEC, NFPA-72, NFPA 101, IBC, IMC, IPC, and IECC, as well as EPA regulations such as 40CFR761 and 40 CFR 61 subpart M, and OSHA standards under 29CFR1926. The contractor must install preformed PVC pipe labels with flow direction indicators and is responsible for receiving, storing, and securing all materials and equipment on site. Performance must adhere to a 90-day total period with 60 days allocated to substantial completion and 30 days to contract close-out, with work to begin within fourteen days of the Notice to Proceed and fully completed within 120 calendar days. Substantial completion requires a formal walk-through with the Center’s authorized representative and the resolution of all punch list items, while final completion mandates submission of government inspection reports, manufacturer start-up checklists, and third-party water testing results. The contract mandates a Certificate of Liability Insurance naming the Center as both certificate holder and additional insured, compliance with the Davis-Bacon Act wage determinations, and proper licensing and permitting under Manhattan, Kansas regulations. The contractor must provide a ten-year warranty on boiler heat exchangers, a two-year warranty on all other parts, a one-year workmanship warranty, and a one-year preventive maintenance agreement for the Center’s use. Offerors must be certified small businesses under the SBA’s set-aside categories including SB, SDB,

Serrato Corporation DBA Flint Hills Job Corps

POSTED

about 11 hours ago

DEADLINE

Keystone Lincoln Dorm Water Heater Repair

Solicitation # keystone-lincoln-dorm-water-heater-repair

The contract is for the repair of a AquaPlex Turbopower 96 hot water heater, Model #100L400A-TPX with Serial Number F008076, located in the Lincoln dormitory at the Keystone Job Corps Center in Drums, Pennsylvania. The scope of work includes replacing specific components such as the blower motor assembly, gas valve, hot surface ignitor, ignitor gasket, and electrode flame rod. Labor and materials must be itemized separately in all proposals, and the contractor is required to comply with Davis-Bacon wage standards and submit certified payroll records. All offerors must be registered and active on SAM.gov to be eligible. The solicitation is set aside exclusively for small business categories, including Small Business, Small Disadvantaged Business, Women-Owned Small Business, HUBZone Small Business, Veteran-Owned Small Business, and Service-Disabled Veteran-Owned Small Business, under NAICS code 238220. The place of performance is clearly defined as Drums, Pennsylvania, but the period of performance, delivery schedule, FOB terms, and estimated contract value are not specified. No formal evaluation factors, weighting criteria, or award basis such as LPTA or best-value are provided. Proposal submission guidelines, including format, deadline, and submission portal, are not detailed in the available documentation, though the posted date is August 7, 2026, and the response deadline is August 14, 2026. The primary point of contact for inquiries is Jennie Drumheller, reachable via email and phone.

Adams & Associates Keystone Red Rock Job Corps

POSTED

about 11 hours ago

DEADLINE

2026-Maui-Dorm Exhaust Fans

Solicitation # 2026- Maui- Dorm Exhaust Fans

This subcontracting opportunity with Management and Training Corporation (MTC) for the replacement of approximately 25 exhaust fans across three dormitories at the Hawaii Job Corps Center in Makawao, Hawaii, is a fixed-price, single lump sum contract structured under a Small Business set-aside that includes eligibility for Small Business, Small Disadvantaged Business, Women-Owned Small Business, HUBZone Small Business, Veteran-Owned Small Business, and Service-Disabled Veteran-Owned Small Business categories. Solicited under NAICS code 238220, the bid must be submitted via email by 3:00 PM HST on August 28, 2026, to Karllene Allen and Mila Handel, and requires compliance with detailed procedural and documentation standards including a fully completed MTC Bid for Lump Sum Contract form, signed by an authorized representative, along with a comprehensive cost breakout covering materials, labor, equipment, fees, bonds, subcontractor costs, overhead, profit, and other direct or indirect expenses. Bidders must also complete and submit the MTC Supplier Packet, including Form W-9, Supplier Self-Certification, and Acceptance of Terms and Conditions, and provide three references for projects of comparable scope and value. A mandatory site visit with signature on an attendance roster is required prior to bid submission, emphasizing the importance of firsthand knowledge of the work conditions and constraints. The contract imposes strict compliance with federal and Department of Labor requirements, including adherence to Executive Order 13658 for the prevailing federal contractor minimum wage, submission of weekly certified payroll reports, and display of bilingual Davis-Bacon Act posters. Bids exceeding $25,000 must include a 20% bid bond, and upon award, performance and payment bonds equaling 100% of the contract value are required from an A-rated surety company approved by MTC. Insurance mandates include general liability coverage of $1 million per occurrence and $3 million aggregate with MTC listed as additional insured, auto liability of $1 million, worker’s compensation of at least $500,000, and professional liability coverage where applicable. Upon award, contractors must disclose any first-tier subcontractors with values over $30,000 and certify they are not debarred under FAR 52.209-6. Contractors must also submit Safety Data Sheets for all hazardous materials used, provide two complete operation and maintenance manuals, deliver at least two hours of on-site training for

Management & Training Corporation

POSTED

about 11 hours ago

DEADLINE

NJCC Building 32 Boiler Replacement in Vermont

Solicitation # njcc-building-32-boiler-replacement-vermont

This solicitation seeks bids to replace an existing oil-fired boiler at Building 32 of the Northlands Job Corps Center in Vergennes, Vermont, with a fully compliant, high-efficiency propane steam boiler system. The scope of work includes demolition and proper disposal of the current oil-fired boiler and blow down separator, installation of a new propane steam boiler and gas burner meeting FEMP JCH-814 efficiency standards, replacement of the duplex boiler feed tank and control panel, condensate tanks, steam traps, Y strainers, check valves, and condensate receivers, installation of new boiler feed water piping with a reduced pressure backflow preventer, insulation of all piping, modification of the existing stack, and full system testing including fuel/oxygen mix verification, water side cleaning, boiler skimming, and startup. All work must comply with the International Mechanical Code, International Energy Conservation Code, International Plumbing Code, International Fuel Gas Code, National Electrical Code, NFPA Life Safety 101, and NFPA 58. The project requires the provision of a propane gas tank and all associated materials, with all items quoted F.O.B. destination and no additional charges for delivery, packing, or insurance accepted unless explicitly included and approved. The solicitation is open only to small business concerns as defined under the SBA’s set-aside programs, including Small Business, Small Disadvantaged Business, Women-Owned Small Business, HUBZone, Veteran-Owned Small Business, and Service-Disabled Veteran-Owned Small Business. Bidders must demonstrate active registration at SAM.gov with a Unique Entity ID, submit a completed Bid Sheet with detailed line-item pricing for equipment, materials, and labor, provide all required Vermont licensing and credentials, and include mandatory documentation such as Form W-9, Vendor Acknowledgement Form, FFATA Notice, Anti-Lobbying Certification if applicable, Certificates of Insurance listing ETR as certificate holder, and a proposed schedule of work. Bonding is required based on project cost: a 100% payment bond plus another form of payment protection for projects between $35,000 and $150,000, and both 100% performance and payment bonds for projects exceeding $150,000. Contractors must comply with the Davis-Bacon Act, Service Contract Act, and Executive Order 14026 minimum wage requirements, adhere to strict center security and conduct rules prohibiting fraternization with staff or students and the possession of alcohol, drugs,

Northlands Job Corps Center /ETR

POSTED

about 11 hours ago

DEADLINE

RFQ#3857 Freezer Door Replacement

Solicitation # RFQ#3857

Management & Training Corporation (MTC) has issued RFQ#3857 Freezer Door Replacement as a subcontracting opportunity for the Charleston Job Corps Center located at 1000 Curtis Price Way, Charleston, WV 25311. The solicitation seeks a qualified contractor to provide all labor, materials, equipment, transportation, supervision, and incidentals required to remove three existing walk-in refrigeration doors— one cooler and two freezers—and install new replacement doors complete with all associated hardware including hinges, latches, gaskets, closers, thresholds, and related accessories. The work must result in doors that align properly, provide an airtight seal, operate smoothly without binding, and be fully functional upon completion. All existing doors and debris must be removed and disposed of properly, and the contractor is required to provide manufacturer warranty documentation and maintenance recommendations. The contract is subject to the Service Contract Labor Standards under FAR 52.222-41 with a mandated wage determination WD#2015-4347 (Rev 29) dated July 8, 2025, requiring compliance with federal prevailing wage rates for service employees. The solicitation is set aside exclusively for small business concerns including Small Disadvantaged Businesses, Women-Owned Small Businesses, HUBZone businesses, Veteran-Owned Small Businesses, and Service-Disabled Veteran-Owned Small Businesses, with eligibility based on the NAICS code 238220 and a size standard of $19 million in annual receipts. Bidders must self-certify their socioeconomic status and provide comprehensive documentation including a completed W-9, Self-Certification Form, Acceptance of Terms and Conditions, three references for similar projects, proof of insurance meeting minimums of $1 million per occurrence for general liability, $1 million for auto coverage, and $500,000 for workers’ compensation, and an insurance certificate naming MTC, DOL, and Charleston Job Corps as certificate holder and additional insured. First-tier subcontractors exceeding $30,000 must disclose any debarment or suspension status under FAR 52.209-6 and all contractors must comply with reporting executive compensation and first-tier subcontract awards under FAR 52.204-10. The contractor must also adhere to Department of Labor requirements including protection of personally identifiable information, mandatory training, records management, and immediate one-hour reporting of any data breach to DOL. All work must be performed on

Management & Training Corporation

POSTED

about 11 hours ago

DEADLINE

Plumbing and Gas Line Repair

Solicitation # plumbing-gas-line-repair

The contract entails the correction of plumbing and gas system deficiencies at the Earle C. Clements Job Corps Center in Morganfield, Kentucky, to ensure compliance with the International Plumbing Code and safety standards. The awarded contractor must provide all labor, materials, equipment, supervision, and incidentals required to complete the work in full operating condition, with specific tasks including gas piping repairs at Building 305 involving isolation, pressure testing, and valve replacement; installation of backflow preventers at Buildings 607 and 701; and relocation of water piping away from electrical panels at Building 610. All work must include piping, fittings, supports, pressure and leak testing, and full restoration of affected areas. The contract is a fixed-price, single lump sum award with an estimated value not exceeding $25,000, and the contractor must achieve substantial completion within 60 consecutive business days after receiving a written Notice to Proceed, beginning work no later than five business days after the agreed start date. A mandatory pre-construction meeting is required upon issuance of the Notice to Proceed. The contractor must adhere to federal labor standards, including payment of the prevailing Federal Contractor Minimum Wage as required by Executive Order 13658, and submit certified payroll reports on a weekly basis. Compliance with FAR clauses such as 52.222-11 requires submission of the SF 1413 Statement and Acknowledgement form, regardless of contract value, while FAR 52.204-10 mandates reporting of executive compensation and first-tier subcontract awards if the contract value exceeds $40,000. The solicitation is set aside for small business entities, including Small Disadvantaged Businesses, Women-Owned Small Businesses, HUBZone, Veteran-Owned, and Service-Disabled Veteran-Owned Small Businesses, and all subcontractors must self-certify under NAICS code 238220. Required documentation includes a detailed bid breakout on company letterhead, completed MTC Supplier Packet containing Form W-9 and Self-Certification, three references for comparable projects, and compliance with insurance requirements including $1 million general liability coverage, $1 million auto liability, and $500,000 workers’ compensation. Contractors must also submit Safety Data Sheets for hazardous materials, verify underground utilities prior to excavation, and provide two hours of on-site training for facility personnel. Final acceptance requires a formal punch list process followed by a final inspection upon resolution of all deficiencies, with liquid

Earle C. Clements Job Corps Center

POSTED

about 11 hours ago

DEADLINE

Fiber Optic Cable Installation – Underground Conduit Pulling & Splicing

Texas Department of Transportation

POSTED

about 11 hours ago

DEADLINE

More opportunities from Department Of Agriculture → USDA Ars Afm Apd

Same awarding agency

Operator Training and DocumentationThis contract entails comprehensive on-site operator orientation, safety training, and maintenance instruction for all equipment components, ensuring personnel are fully prepared to operate and service the systems effectively. The scope includes the delivery of technical manuals and warranty documents to support ongoing use and compliance. Training will be conducted at the place of performance located in Byron, Georgia, with a zip code of 31008. The solicitation falls under NAICS code 611430, which classifies it as a subcontract for other business support services. The opportunity was posted on August 7, 2026, and responses are due by August 17, 2026, at 7:00 PM. The contracting agency is the USDAARS AFM APD under the U.S. Department of Agriculture, though no specific point of contact or set-aside details are provided. All activities must be completed in accordance with the specified location and deliverables outlined in the terms.

Professional and Management Development Training

POSTED

about 15 hours ago

DEADLINE

Equipment Integration, Testing, and DeliveryThe contract involves the final assembly, hydraulic and PTO integration, operational testing, and delivery of a complete equipment package to Byron, Georgia, with requirements for on-site setup and verification to ensure full functionality. All work must be completed and validated at the specified delivery location, emphasizing precision in integration and rigorous testing to meet operational standards. The procurement is structured as a subcontract under NAICS code 811310, associated with the USDA ARS AFM APD agency, and targets a specific technical scope requiring specialized expertise in equipment integration and field deployment. Responses to this solicitation are due by August 17, 2026, at 7:00 PM, with the posting date listed as August 7, 2026. The place of performance is strictly limited to Byron, GA, with a zip code of 31008, and no alternative delivery or setup locations are authorized. While no set-aside type or point of contact is provided, the nature of the work implies a need for qualified subcontractors with demonstrated capabilities in agricultural equipment systems, hydraulic integration, and post-installation verification under field conditions. Failure to meet the specified integration and testing criteria may result in rejection or non-compliance.

Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and Maintenance

POSTED

about 15 hours ago

DEADLINE

Flex Wing Rotary Cutter Supply (FC20M)The contract entails the supply of a new FC20M flex wing rotary cutter designed for mowing and vegetation management, with all necessary components including a PTO shaft and safety shields fully integrated to ensure field readiness upon delivery. The equipment is intended for use in agricultural and land management operations and must meet technical and safety standards to support effective and safe operation in diverse terrain conditions. Delivery and installation are to be completed at the specified place of performance in Byron, Georgia, with the equipment required to be fully functional and prepped for immediate field deployment. The solicitation is issued as a subcontract under the USDA ARS AFM APD, with the NAICS code 333111 indicating classification within agricultural, construction, and mining machinery manufacturing. The opportunity was posted on August 7, 2026, and responses are due by August 17, 2026, at 7:00 PM Eastern Time. No set-aside designation or agency-specific procurement restrictions are noted, and the contract does not include a designated point of contact. Interested parties must submit proposals through the official SAM.gov portal before the deadline to be considered for award.

Farm Machinery and Equipment Manufacturing

POSTED

about 15 hours ago

DEADLINE

Root Rake Grapple Supply (AV57G-84)The contract pertains to the supply of a new AV57G-84 root rake grapple attachment designed specifically for orchard and pecan farm cleanup operations, ensuring compatibility with the 540M loader model. The scope includes all necessary mounting hardware and comprehensive safety instructions to facilitate proper installation and safe usage in agricultural environments. The equipment is intended to improve efficiency in debris removal and tree maintenance tasks common in these farming settings. Performance of this subcontract is required to occur in Byron, Georgia, with the ZIP code 31008 as the designated place of performance. The solicitation falls under NAICS code 332420, classifying it within the Industrial Machinery Manufacturing sector, and is structured as a subcontract with no set-aside designation. The posting date is August 7, 2026, and responses must be submitted no later than August 17, 2026, at 7:00 PM Eastern Time. The contracting entity is the USDA Agricultural Research Service, Agricultural Facilities and Property Division, operating under the U.S. Department of Agriculture. There is no designated point of contact provided, and the full details can be accessed through the SAM.gov workspace link associated with the opportunity.

Metal Tank (Heavy Gauge) Manufacturing

POSTED

about 15 hours ago

DEADLINE

Front-End Loader Supply (John Deere 540M)The contract entails the supply of a new John Deere 540M front-end loader designed for seamless integration with the 5105ML tractor, ensuring full operational compatibility. The scope includes all necessary hydraulic linkage components, safety guards, and mandatory OEM compliance to meet manufacturer specifications and performance standards. The equipment must be delivered in accordance with original equipment manufacturer requirements to guarantee reliability, safety, and warranty validity. The solicitation is classified as a subcontract under NAICS code 333120 and is managed by the USDA ARS AFM APD, with the place of performance located in Byron, Georgia, ZIP 31008. The opportunity was posted on August 7, 2026, and responses are due by August 17, 2026, at 7:00 PM. Interested parties must submit proposals prior to the deadline to be considered.

Construction Machinery Manufacturing

POSTED

about 15 hours ago

DEADLINE

Utility Tractor Supply (John Deere 5105ML)The contract entails the supply of a new, low-profile John Deere 5105ML utility tractor that is fully assembled and fully compliant with the original equipment manufacturer’s specifications. The tractor must be delivered in accordance with all required standards and accompanied by the necessary certifications to ensure operational readiness and regulatory compliance. The item is intended for use by the USDA ARS AFM APD, with performance obligated at Byron, Georgia, zip code 31008. The solicitation is classified as a subcontract under NAICS code 333111, which pertains to agricultural machinery and equipment manufacturing. The opportunity was posted on August 7, 2026, and responses are due by August 17, 2026, at 7:00 PM Eastern Time. The contract does not specify a set-aside type or an assigned point of contact, and no additional agency details beyond the department name and location are provided.

Farm Machinery and Equipment Manufacturing

POSTED

about 15 hours ago

DEADLINE

Low profile tractor with accessories

Solicitation # 1232SA26Q1240

The contract is for a low profile tractor with accessories, solicited under number 1232SA26Q1240, posted on August 7, 2026, with a response deadline of August 17, 2026, at 7:00 PM Eastern Time. It is a combined solicitation with no set aside, meaning it is open to all eligible businesses regardless of size or category, and falls under the NAICS code 333111, which corresponds to the manufacturing of tractors and farm machinery. The contracting activity is led by the USDA ARS APM APD, a division of the U.S. Department of Agriculture, located in Beltsville, Maryland, with the performance location specified as Byron, Georgia, ZIP code 31008. Primary point of contact for inquiries is Kristine Stout, reachable at kristine.stout@usda.gov. All proposals must be submitted through the SAM.gov portal linked in the posting, and the requirement is for a tractor designed with a low profile and associated accessories suitable for specific operational needs in the designated area.

Farm Machinery and Equipment Manufacturing

POSTED

about 15 hours ago

DEADLINE

Greenhouse Environmental Control and Drip Irrigation Installation - Lubbock, TX

Solicitation # 1232SA26Q1236

The solicitation for greenhouse environmental control and drip irrigation installation in Lubbock, Texas, is issued as a combined synopsis and request for quotation under FAR Part 12, with no separate written solicitation to be provided. The contract requires the installation of environmental controls, an automated drip irrigation system, a new cooling system, and a bug exclusion system for two Jaderloon Classic Gutter Greenhouses. This acquisition is a total small business set-aside under NAICS code 221310 for Water Supply and Irrigation Systems, with a small business size standard of $41 million. Only qualified small businesses may respond, and all responsible sources are encouraged to submit quotations. A mandatory site visit is required to receive a technically acceptable proposal, and failure to complete the visit will result in disqualification. The response deadline is August 27, 2026, at 10:00 PM Eastern Time, with the solicitation posted on August 7, 2026. The contracting office is the USDA Agricultural Research Service, located in Beltsville, Maryland, though all work must be performed at the Lubbock, Texas site. Primary point of contact for inquiries is David Hildebrand, reachable via email at david.hildebrand@usda.gov. All submissions must be directed through the SAM.gov platform using the provided UI link, and no alternative submission methods will be accepted.

Water Supply and Irrigation Systems

POSTED

about 15 hours ago

DEADLINE

STERIS Total Care Service Contract

Solicitation # 1232SA26Q1214

The USDA Agricultural Research Service, via the Office of the Assistant Secretary for Administration in Beltsville, Maryland, is soliciting quotations for the STERIS Total Care Service Contract under solicitation number 1232SA26Q1214, which is issued as a combined synopsis and solicitation in accordance with FAR Part 12. This requirement is set aside exclusively for small business concerns and falls under the North American Industry Classification System code 811210 for Electronic and Precision Equipment Repair. The contract encompasses one base year with four additional option years, providing long-term service support for Steris equipment. All responsible sources are invited to submit quotations, and no separate written solicitation will be issued. The response deadline is August 14, 2026, at 3:00 PM Eastern Time, and all submissions must be received by this time to be considered. The point of contact for this procurement is Kelly Wright, reachable via email at kelly.wright@usda.gov. The place of performance details are not specified but will likely align with the agency’s operational needs in Maryland. The acquisition is classified as unrestricted in terms of sourcing eligibility within the small business set-aside, meaning any qualified small business may respond. The contract opportunity is publicly available through the SAM.gov portal, and interested parties are encouraged to review the posting for any additional submission instructions or requirements not detailed in the announcement.

Electronic and Precision Equipment Repair and Maintenance

POSTED

about 15 hours ago

DEADLINE

Site Inspection and Compliance CoordinationThe contract titled Site Inspection and Compliance Coordination is a Small Business Set Aside under the SBA program, classified under NAICS code 541330, and is structured as a subcontract. It requires the contractor to coordinate a mandatory site visit and ensure all work performed fully complies with the safety, access, and compliance policies established by the USDA Agricultural Research Service. The place of performance is located in Sidney, Montana, with a zip code of 59270. The solicitation was posted on August 6, 2026, and responses are due by August 26, 2026, at 6:00 PM. The contracting agency is the USDA ARS AFM APD, under the Department of Agriculture, and no specific point of contact is listed. This engagement demands strict adherence to federal standards, with all activities tied directly to the operational requirements of the USDA ARS facility in Sidney.

Engineering Services

POSTED

DEADLINE

Technician Services for Commissioning and TrainingA subcontract has been issued under a Small Business Set Aside for technical services related to the commissioning and training of a new sterilizer system at a facility in Sidney, Montana, with a ZIP code of 59270. The scope of work includes on-site installation, operational testing, troubleshooting, and comprehensive training for facility staff on the proper use, daily operations, and routine maintenance of the equipment. This effort is being conducted under NAICS code 811212, indicating classification within the medical and diagnostic laboratory industry, and is being managed by the USDA Agricultural Research Service, Agricultural Facilities and Maintenance Project Division. Interested parties must submit responses by August 26, 2026, at 6:00 PM, following the posted solicitation on August 6, 2026, with all performance activities centered exclusively at the Sidney location.

Computer and Office Machine Repair and Maintenance

POSTED

DEADLINE

Electrical and Power System IntegrationThe contract requires full electrical integration of a sterilizer system, encompassing power supply connections, proper grounding, control circuit wiring, and seamless coordination with existing facility power infrastructure to ensure safe and compliant operation. All work must meet industry standards for medical equipment installation and align with the facility’s electrical specifications to prevent interference, ensure uptime, and support regulatory requirements for sterilization processes. This is a Small Business Set Aside subcontract under NAICS code 238210, issued by the USDA Agricultural Research Service’s Agricultural Facilities Management and Planning Division, with performance location in Sidney, Montana, 59270. The opportunity was posted on August 6, 2026, and responses are due by August 26, 2026, at 6:00 PM. The scope demands technical expertise in both electrical systems and medical device installation, with an emphasis on reliability, safety, and compatibility with broader utility systems at the site.

Electrical Contractors and Other Wiring Installation Contractors

POSTED

DEADLINE