Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

Electrical Connection and Performance Verification

Open

Federal

Response Deadline11/19/2026, 11:00:00 AM CST

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract for the Department of Defense, specifically FA8125 Afsc Pzima, involves providing final electrical connections and operational testing for frequency converters. The scope of work includes connecting power, water, and compressed air, followed by on-site operational verification and power-on demonstrations. All activities must adhere to OEM specifications and Tinker Facility and Electrical Standards, utilizing 400 Hz power verification tools to ensure units are fully operational. The project requires the delivery of connected units verified by a Government Subject Matter Expert. Performance will take place in the 73145 zip code area under NAICS code 238210. The solicitation was posted on November 6, 2026, with a response deadline of November 19, 2026.

General Info

DoD subcontract for frequency converter electrical connections and operational testing at Tinker Facility.

Agency

Department Of Defense → FA8125 Afsc Pzima

NAICS

238210 - Electrical Contractors and Other Wiring Installation Contractors

Place of Performance

OK, 73145, USA

Set-Aside

NONE

Documents

This scope was carved out of FA8125-27-Q-0010.

The full solicitation package (2 documents), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

Frequency Converters

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedNov 6

subcontract

Response DeadlineNov 19

Submission deadline

Response Deadline

11/19/2026, 11:00:00 AM CSTin 13 days

Ready to pursue this opportunity?

Get full access to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → FA8125 Afsc Pzima

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → FA8125 Afsc Pzima

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Performs final electrical connections and operational testing for prime contractors on FA8125 Afsc Pzima projects. Connects power, water, and compressed air for frequency converters and conducts on-site operational verification and power-on demonstrations. Work must meet Tinker Facility and Electrical Standards and OEM specifications using 400 Hz power verification tools. Delivers fully operational, connected units verified by Government SME.

Similar Contracts

Same NAICS industry code

FRSMP277009/JLM-Lighting Phase 2

Solicitation # WMATA-0000010972

The Washington Metropolitan Area Transit Authority is soliciting bids for contract FRSMP277009/JLM-Lighting Phase 2 under solicitation number WMATA-0000010972. This project falls under NAICS code 238210, which pertains to electrical contracting and related services. The solicitation was posted on November 6, 2026, and requires all responses to be submitted by the deadline of December 2, 2026. Interested parties can find further details and submission guidelines through the official WMATA supplier portal.

Washington Metropolitan Area Transit Authority

POSTED

DEADLINE

Inland Empire Job Corps-Request for Quote Electrical Repairs

Solicitation # inland-empire-job-corps-request-quote-electrical-repairs

Management & Training Corporation (MTC), operator of the Inland Empire Job Corps, is seeking quotes for a subcontracting opportunity to perform electrical and fire alarm repairs at the Inland Empire Job Corps Center in San Bernardino, California. Under NAICS code 238210, the scope of work includes installing GFCI protection in the cafeteria, culinary arts kitchen, and staff lounge, repairing open-ground conditions in the dormitory and medical areas, and correcting deficiencies in several electrical panelboards. The contractor must also update circuit directories, label feeder conductors, and test all newly installed smoke and heat detection devices. All work must comply with the National Electrical Code (NEC), NFPA standards, and applicable federal, state, and local regulations. Interested offerors must submit a lump sum bid, a completed supplier self-certification packet, proof of insurance, and three professional references by 3:00 PM PT on November 12, 2026. The opportunity is open to various small business set-asides, including VOSB, SDVOSB, WOSB, and HUBZone certified firms. Awardees must adhere to Service Contract Labor Standards wage determinations and various FAR clauses regarding employment eligibility, equal opportunity, and anti-kickback procedures based on the final contract value. Required insurance includes general liability of at least 1,000,000 dollars and worker's compensation with employer's liability limits of 500,000 dollars.

Inland Empire Job Corps

POSTED

DEADLINE

26-140 Installation of Emergency Shut Off Switches

Solicitation # 26-140

Solicitation 26-140 is a subcontracting opportunity for the Atterbury Job Corps Center in Edinburgh, Indiana, operated by Adams and Associates, Inc. for the U.S. Department of Labor. The project requires the installation of two mushroom-head push-button emergency shut-off switches and a new 60A, 208/120V, 3-phase, 4-wire, 6-circuit branch circuit panel with a 60A shunt-trip main circuit breaker in the Facility Maintenance Shop. All work must comply with OSHA, EPA, and Indiana state and local building codes, following FNC guidelines. The contractor must provide a one-year guarantee of workmanship and all necessary operating and maintenance manuals and training prior to final acceptance. This is a small business set-aside solicitation requiring a single lump sum bid. Award will be based on best value, evaluated by price (60 points), quality (20 points), past performance (10 points), and schedule (10 points). A mandatory site visit is scheduled for November 10, 2026, and proposals are due by November 20, 2026. Qualified offerors must hold a valid Indiana Contractor's License, provide proof of specific automobile, general liability, and workers compensation insurance, and certify compliance with Davis Bacon Act wage rates. Payment terms are Net 30, and work must commence within 14 days of the Notice to Proceed.

Atterbury Job Corps. – Adams & Associates

POSTED

DEADLINE

NC Global TransPark Phase 2

Solicitation # nc-global-transpark-phase-2

Ace Electric is seeking WMBE subcontractors for the NC Global TransPark Phase 2 project in North Carolina. The scope of work involves the addition of an airplane hangar and three support buildings, specifically requiring expertise in fire alarm, data, and security systems under NAICS code 238210. The project is scheduled to commence in the spring of 2027 with an estimated duration of 15 months. Interested parties should coordinate with Thomas Jeffords or Chris Mitchell to discuss participation in this small business set-aside opportunity.

Ace Electric, Inc.

POSTED

DEADLINE

Transformer Oil Testing Services

Solicitation # RFP-VC-26-010

The Inland Empire Utilities Agency is soliciting proposals under RFP-VC-26-010 for professional transformer oil testing services to enhance the efficiency, safety, and consistency of its operations across six regional locations, including RP-1, RP-2, RP-4, RP-5, CCWRF, and CDA. The scope of work primarily involves infrared testing and oil testing analysis. Key technical requirements include conducting infrared inspections on energized transformers under typical load conditions by ASNT Level 1 certified technicians and adhering to ASTM D923, NETA MTS, IEEE, and NFPA 70E standards. Deliverables include a final report specifying recommended operating pressures for various transformer types and manufacturers, as well as the development of standard operating procedures for sample handling and contamination prevention. The agency intends to make a single award to the most capable and cost-effective offeror. Evaluation criteria focus on the bidder's experience with utilities or industrial facilities, the ability to provide both oil sampling and infrared thermographic services, the proposed staffing plan, and the fee structure. Proposals must be submitted electronically via PlanetBids by December 23, 2026, and must include a detailed company profile, project methodology, and three references from the past five years. Awardees must comply with California Labor Code prevailing wage requirements, provide comprehensive insurance certificates, and ensure all materials used in sampling systems are temperature-rated and resistant to degradation. Payment will be processed electronically via ACH within 30 days of invoice approval by the Project Manager.

Inland Empire Utilities Agency

POSTED

DEADLINE

in about 2 months

Purified Water Replenishment San Jacinto Valley Advanced Water Purification Facility

Solicitation # purified-water-replenishment-san-jacinto-valley-advanced-water-purification-facility-2

Axia Electric LLC is soliciting bids from SBE/DBE certified firms for the Purified Water Replenishment San Jacinto Valley Advanced Water Purification Facility and Brine Ponds project in California for the Eastern Municipal Water District. The requested scopes of work include low voltage systems, fiber optics, and the supply of electrical materials. Interested bidders must submit their quotes by 2:00 PM on November 18th, with a final bid deadline of November 19th, 2026. All submissions should be directed to lead estimator Ryan Falk. Qualified subcontractors must be registered to perform public work pursuant to Section 1725.5 of the Labor Code and must adhere to the AGC Master Labor Agreements and Axia's Standard Long Form Subcontract or Purchase Order. Minimum insurance requirements include 1 million dollars for General Liability per occurrence, 2 million dollars for Aggregate and Completed Operations, 5 million dollars for Excess Liability, 1 million dollars for Auto Liability, and 1 million dollars for Workers Compensation and Employer Liability. Evaluation factors include SBE/DBE certification status, responsiveness to deadlines, and the inclusion of any lower-tier SBE/DBE participation.

POSTED

DEADLINE

Centennial JCC Emergency Lighting Replacement, Upgrade, Testing & Maintenance Services

Solicitation # centennial-jcc-emergency-lighting-replacement-upgrade-testing-maintenance-services

Management & Training Corporation is soliciting bids for a fixed-price, single lump sum contract to provide emergency lighting replacement, upgrade, testing, and maintenance services at the Centennial Job Corps Center in Nampa, Idaho. The project involves engaging a qualified electrical contractor to inspect, repair, and certify emergency lighting systems in accordance with NFPA 101 (2024 Edition), NFPA 70, and OSHA regulations. The estimated contract value ranges between $25,000 and $100,000. Bids are due by December 1, 2026, and must be submitted via email to Sandra Clore. A physical site visit and signature on the attendance roster are mandatory prerequisites for bid submission. The award will be based on overall best value. Bidders must submit a signed MTC Bid for Lump Sum Contract form along with a detailed cost breakout covering materials, labor, equipment, fees, bonds, and overhead. For bids equal to or greater than $25,000, a bid bond guarantee of 20% of the base bid is required, and the awarded contractor must provide performance and payment bonds from a surety company with at least an A- rating. The contract is subject to the Davis-Bacon Act, Federal Contractor Minimum Wage requirements, and various FAR clauses regarding small business utilization, security requirements, and whistleblower rights. Contractors are required to provide manufacturer and installer warranties and apply durable, uniquely numbered labels to all tested fixtures for future tracking.

Management & Training Corporation/Centennial Job Corps Center

POSTED

DEADLINE

ASO-1489-00 Installation of Distance Measuring Equipment (DME) on runway 15 at the Charleston International Airport in Charlston, SC

Solicitation # aso-1489-00-installation-distance-measuring-equipment-dme-runway-15-charleston-international-airport

This solicitation, identified as ASO-1489-00, involves the construction and installation of Distance Measuring Equipment (DME) to be collocated with the Runway 15 Localizer at Charleston International Airport in South Carolina. Managed by Parsons, the project falls under NAICS code 238210 and is specifically designated as a set-aside for various small business types, including Veteran Owned, Service-Disabled Veteran Owned, Women-Owned, and HUBZone Small Businesses. Interested parties must submit their responses by the deadline of November 27, 2026. The primary point of contact for this opportunity is Quentin Wack. All eligible small business entities are encouraged to participate in this procurement process to support the aviation infrastructure at the Charleston facility.

POSTED

DEADLINE

AMC-0235 TBD VOR Public Announcement

Solicitation # amc-0235-tbd-vor-public-announcement

This solicitation, issued by PTSI Managed Services Inc. (Parsons), involves a diverse range of facility maintenance and construction projects located in Louisiana. The scope of work encompasses electrical repairs and grounding system updates, roofing installation, plumbing replacements, grading work, painting, and door repairs. The estimated construction value for this project is projected to be between 500,000 and 1,000,000 dollars. The opportunity is designated as an SBA set-aside, specifically open to Small Businesses, including Small Disadvantaged, Women-Owned, HUBZone, and Veteran-Owned Small Businesses. Interested parties must submit their responses by November 16, 2026. The project falls under NAICS code 238210, and inquiries can be directed to the primary point of contact, Kurtis Kinard.

PTSI Managed Services Inc. (Parsons)

POSTED

DEADLINE

ASO-0728-00 DME Shelter Installation in Shelby, NC

Solicitation # aso-0728-00-dme-shelter-installation-shelby-nc

Parsons Corporation is soliciting bids for the installation of a DME shelter in Shelby, North Carolina. The scope of work includes the installation of a shelter furnished by others, along with a DME antenna, associated foundations, junction box, meter rack, underground conduit, grounding, and conductors. This opportunity is open to various small business classifications, including SBA certified Veteran Owned, Service-Disabled Veteran Owned, Women-Owned, and HUBZone Small Businesses. Interested parties must submit their responses by December 30, 2026.

Parsons Corporation

POSTED

DEADLINE

in about 2 months

Fueling System Electrical & InstrumentationThis subcontract opportunity with the Bristol Alliance of Companies involves the installation and upgrading of electrical safety and monitoring systems for fuel farms located at US Army facilities in Kentucky. The scope of work focuses on enhancing infrastructure through the upgrade of Automatic Tank Gauge consoles and modules, the installation of Emergency Fuel Shut Off stations, and the implementation of grounding for tanks and stairs in strict accordance with IEEE 1048 and IEEE C2 standards. The primary objective is to deliver fully operational ATG and EFSO systems to support prime contractors on these federal projects. Interested parties should note that the response deadline is December 22, 2026, and the work will be performed in Greenville, Kentucky, under NAICS code 238210.

Bristol Alliance of Companies

POSTED

about 4 hours ago

DEADLINE

in about 2 months

Mobile Electrical Systems InstallationThis subcontract for Mobile Electrical Systems Installation involves the delivery of complete electrical systems for prime contractors working on projects at the Texas A&M University College of Veterinary Medicine. The scope of work includes the installation of wiring, circuit breakers, and lighting, as well as the integration of shore power connections or onboard generators. All work must be performed in accordance with NFPA 70 standards to ensure a fully wired and tested electrical system. The opportunity is categorized under NAICS code 238210 and was posted on November 6, 2026. Interested parties must submit their responses by the deadline of November 20, 2026. Further details and submission processes are managed through the Texas A&M University procurement portal.

Texas A&M University

POSTED

about 4 hours ago

DEADLINE

More opportunities from Department Of Defense → FA8125 Afsc Pzima

Same awarding agency

Technical Training ServicesThis subcontract for Technical Training Services involves providing on-site operational training for prime contractors delivering equipment to the US Air Force at Tinker AFB. The scope of work requires the delivery of a specialized training curriculum for equipment operation, designed to accommodate up to eight operators over a one-day period consisting of four hours of instruction per day. The ultimate goal is the successful delivery of a completed training session for government personnel. To execute these services, trainers must possess the necessary security clearances and obtain base access. The opportunity is associated with the Department of Defense under agency FA8125 Afsc Pzima and falls under NAICS code 611519. Interested parties should note the response deadline of November 24, 2026.

Other Technical and Trade Schools

POSTED

about 12 hours ago

DEADLINE

Equipment Installation & Performance VerificationThis subcontract involves the physical installation and technical verification of B2210 controllers for prime contractors supporting US Air Force projects at Tinker AFB. The scope of work includes the complete installation of the X-ray controller, followed by rigorous performance verification and acceptance testing to ensure the equipment is fully operational and adheres to or exceeds original equipment manufacturer specifications. The project is managed under the Department of Defense through agency FA8125 Afsc Pzima and falls under NAICS code 238210. Personnel assigned to this contract must obtain necessary base access approvals and maintain strict compliance with all Tinker AFB safety and hazard reporting protocols. Responses for this opportunity are due by November 24, 2026.

Electrical Contractors and Other Wiring Installation Contractors

POSTED

about 12 hours ago

DEADLINE

B2210 X-ray Controller SupplyThis subcontract involves the manufacture and delivery of one B2210 Upgrade X-ray controller intended for prime contractors supporting the US Air Force at Tinker AFB. The scope of work requires the supplier to produce and ship the controller while adhering to strict safety and regulatory guidelines. All shipments must comply with the OSHA Hazardous Communication Standard, specifically Title 29 CFR Part 1910.1200. This includes the provision of manufacturer Safety Data Sheets and the clear application of product identifiers, signal words, and hazard pictograms on all containers. The contract is categorized under NAICS code 334510 and is managed through the Department of Defense.

Electromedical and Electrotherapeutic Apparatus Manufacturing

POSTED

about 12 hours ago

DEADLINE

Equipment Operations and Maintenance TrainingThis subcontract involves providing specialized technical training for government employees supporting FA8125 Afsc Pzima projects. The scope of work requires the delivery of two four-hour training sessions at Tinker AFB, focusing on the operational parameters and operations and maintenance procedures for 180 kVA and 90 kVA frequency converters. To ensure quality and compliance, the contractor must utilize OEM-certified trainers to conduct hands-on demonstrations using installed units. The primary objective is the successful delivery of completed training for government personnel under NAICS code 611519. Responses for this opportunity are due by November 19, 2026.

Other Technical and Trade Schools

POSTED

about 12 hours ago

DEADLINE

Equipment Transport and Offloading ServicesThis subcontract for Equipment Transport and Offloading Services involves the delivery and physical placement of heavy mobile equipment for prime contractors on FA8125 Afsc Pzima projects at Tinker AFB. The scope of work includes transporting five units to two specific locations, securing all necessary DOT permits for oversized and heavy loads, and utilizing rigging, cranes, or forklifts to offload and position the units in designated installation areas. The project is managed under the Department of Defense with a performance location in zip code 73145. To ensure base access, all personnel must undergo background checks in accordance with TAFBI 31-101. The solicitation was posted on November 6, 2026, with a response deadline of November 19, 2026.

Specialized Freight (except Used Goods) Trucking, Local

POSTED

about 12 hours ago

DEADLINE

Mobile Power/Frequency Converter SupplyThis subcontract involves the supply of five commercial off-the-shelf mobile frequency converters for prime contractors supporting FA8125 Afsc Pzima projects under the Department of Defense. The scope of work requires the manufacture of two 180 kVA Dual Output units and three 90 kVA Single Output units designed to convert conventional power to 400 Hz aircraft power. Each unit must be equipped with pneumatic tires, tow bar actuated parking brakes, and pintle hook hitches. The contractor is responsible for delivering the fully assembled converters along with comprehensive operation and maintenance manuals. All equipment must strictly adhere to ISO 6858:2017, MIL-STD-130, and MIL-STD-129 standards. The project falls under NAICS code 335311, with performance taking place in zip code 73145.

Power, Distribution, and Specialty Transformer Manufacturing

POSTED

about 12 hours ago

DEADLINE

Frequency Converters

Solicitation # FA8125-27-Q-0010

Solicitation FA8125-27-Q-0010 is a firm-fixed-price acquisition for the procurement of five mobile frequency converters to convert conventional electrical power to 400 Hz aircraft power. The requirement consists of two 180 kVA dual-output converters and three 90 kVA single-output converters. The scope of work includes delivery, offloading, final connection, performance verification, and the provision of two four-hour training sessions for 3 to 8 employees at two separate locations at Tinker Air Force Base, Oklahoma. All equipment must be delivered on or before February 15, 2027, and must comply with ISO 6858:2017, Tinker Facility and Electrical Standards, and OEM specifications. The acquisition is conducted under FAR Part 12 for commercial items, with price as the sole evaluation factor for award. Award will be granted to the vendor with the lowest total evaluated price who conforms to all solicitation requirements. Contractors must adhere to strict packaging and marking standards, including the implementation of Item Unique Identification (IUID) per MIL-STD-130 and shipment labeling per MIL-STD-129. Invoicing and payment must be processed electronically through the Wide Area WorkFlow (WAWF) system. Offerors are required to complete annual representations and certifications via SAM.gov and must certify the absence of hazardous materials brought on base within ten days of award.

All Other Miscellaneous Electrical Equipment and Component Manufacturing

POSTED

about 12 hours ago

DEADLINE

Med. Press. Pump Module Motor Rebuild

Solicitation # FA812527Q0009

The Department of Defense, specifically the FA8125 Afsc Pzima office located at Tinker AFB, Oklahoma, is soliciting quotes for the rebuild of Medical Pressure Pump Module Motors. This opportunity is designated as a Total Small Business Set Aside under NAICS code 811310. Interested parties must submit their quotes to the listed points of contact, Avery Minard or Tran Tran, by the response deadline of November 20, 2026. The performance of the contract will take place in Oklahoma.

Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and Maintenance

POSTED

about 12 hours ago

DEADLINE

Upgrade X-Ray Controller

Solicitation # C27-003

Solicitation C27-003, issued by the Department of the Air Force under the Oklahoma City Air Logistics Complex at Tinker Air Force Base, Oklahoma, seeks a contractor to provide and install one B2210 Upgrade X-ray controller for automated equipment. The contractor is responsible for the delivery of the equipment on a FOB Destination basis and must ensure the system meets or exceeds all Original Equipment Manufacturer specifications and specific Statement of Work requirements. Performance includes onsite installation, testing, debugging, and system acceptance, which is estimated to take up to two days. Additionally, the contractor must provide four hours of onsite operator and maintenance training for up to eight personnel. The contractor must adhere to strict safety and environmental standards, including OSHA Hazardous Communication Standards, RCRA regulations, and AFMAN 32-7002. All hazardous materials must be labeled according to 29 CFR 1910.1200 and accompanied by a manufacturer Safety Data Sheet. Within ten days of the award, the contractor must certify whether hazardous waste will be generated or if hazardous materials will be brought onto the base. Coordination with the Government Point of Contact is required seven business days prior to arrival at Tinker AFB, and the contractor must be present for the entirety of the acceptance testing to verify that installation aligns with Tinker Facility and Electrical Standards.

Instrument Manufacturing for Measuring and Testing Electricity and Electrical Signals

POSTED

about 12 hours ago

DEADLINE

Workstation PC SupplierThis subcontract opportunity, titled Workstation PC Supplier, involves providing computing hardware and operating systems to prime contractors supporting Air Force Sustainment Center projects under the Department of Defense. The scope of work requires the delivery of desktop PCs specifically compatible with laser solid-state control systems, ensuring each unit includes the necessary installed operating systems and Ethernet connectivity for seamless network integration. The procurement is categorized under NAICS code 423430 and is associated with agency FA8125 Afsc Pzima. Interested parties must note the response deadline of November 10, 2026, with the place of performance located in zip code 73145.

Computer and Computer Peripheral Equipment and Software Merchant Wholesalers

POSTED

DEADLINE

Fiber Laser Metal Marking Workstation SupplierThis subcontract involves the procurement of two compact, benchtop fiber laser marking workstations to support prime contractors on Air Force Sustainment Center projects. The required equipment must feature 20W Variable-Pulsed MOPA Lasers with a 1064nm wavelength, air cooling, and solid-state control systems equipped with Class II 635nm laser diodes. The supplier is responsible for providing all necessary manufacturer literature and ensuring a two-year warranty for the hardware. The contract mandates the delivery of two fully operational marking tools FOB Destination to Tinker AFB in Oklahoma. Managed by the Department of Defense under agency FA8125 Afsc Pzima, the opportunity falls under NAICS code 333998. Responses are due by November 10, 2026.

All Other Miscellaneous General Purpose Machinery Manufacturing

POSTED

DEADLINE

A27-017 Fiber Laser Metal Marking Tool

Solicitation # FA812527Q0006

Solicitation FA812527Q0006 is a Firm Fixed Price contract issued by the Air Force Sustainment Center's Maintenance Contracting Branch at Tinker AFB, Oklahoma. The Department of Defense is seeking the procurement of two compact, benchtop fiber laser metal marking workstations, such as the Brady Lightwriter or an equivalent. These industrial tools are required to create high-resolution, machine-readable identifiers, including 2D barcodes and permanent text, on various metal tools and tags. Key technical specifications include a 20W variable-pulsed MOPA laser with a 1064nm wavelength, a solid state control system, a pulse range of 1-350ns, and a Class II 635nm laser diode. The equipment must include a two-year warranty, and while a PC is optional, the units must feature available Ethernet ports. The contract will be awarded based on the Lowest Price Technically Acceptable (LPTA) basis. Offerors must submit a completed quote sheet and provide comprehensive manufacturer literature, data sheets, or certifications to demonstrate that the equipment meets all salient characteristics. Quotes are due by November 10, 2026, and must be submitted via email to the designated contract specialist and contracting officer. Shipping is designated as FOB Destination to Tinker AFB, and all freight costs must be included in the quoted price. Payment will be processed through the Wide Area Workflow (WAWF) application with default Net 30 terms upon government acceptance of the items.

Machine Tool Manufacturing

POSTED

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS