Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

Electrical Contact Aid/Oxide Inhibitor Supplier

Open

Federal

Response Deadline11/12/2026, 03:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract, issued by the Department of Energy for the Western-Desert Southwest Region, seeks a supplier to provide corrosion-resistant electrical contact aid and oxide inhibitor for prime contractors working on Western Area Power Administration projects. The requirement consists of 24 eight-ounce bottles of a non-melting, non-petroleum based compound, specifically requesting Penn-Union PN: CUALGEL8OZ or an equivalent product. All supplies must adhere to ASTM D217 consistency standards and DOE-D-2001 packaging specifications. The selected vendor is responsible for the delivery and unloading of the materials to a ground-level pad at the DSW Warehouse. This opportunity is designated as an SBA set-aside under NAICS code 325510. Interested parties must submit their responses by November 12, 2026, at 3:00 PM.

General Info

DOE seeks supplier for 24 bottles of corrosion-resistant electrical contact aid by 11/12/2026.

Agency

Department Of Energy → Western-Desert Soutwest Region

NAICS

325510 - Paint and Coating Manufacturing

Place of Performance

Not specified

Set-Aside

SBA

Documents

This scope was carved out of 89503127QWA000428.

The full solicitation package (2 documents), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

PURCHASE OF WAREHOUSE STOCK - TURNBUCKLES, BOLTS,

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedNov 5

subcontract

Response DeadlineNov 12

Submission deadline

Response Deadline

11/12/2026, 03:00:00 PM UTCin 6 days

Ready to pursue this opportunity?

Get full access to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Energy → Western-Desert Soutwest Region

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Energy → Western-Desert Soutwest Region

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Supplies corrosion-resistant electrical contact aid/oxide inhibitor for prime contractors on Western Area Power Administration (WAPA) projects. Provides 24 bottles (8 oz) of non-melting, non-petroleum based compound, brand name or equal to Penn-Union PN: CUALGEL8OZ. Consistency must meet ASTM D217 and packaging DOE-D-2001. Delivers and unloads items to a ground-level pad at the DSW Warehouse.

Similar Contracts

Same NAICS industry code

Sherwin Williams SHER-FLIGHT® Waterborne Traffic Paint SupplierThis subcontract agreement establishes Sherwin Williams as the supplier of SHER-FLIGHT waterborne traffic paint for prime contractors working on City of Houston municipal projects. The contract specifically requires the provision of TM2248 White paint, which must conform to Federal Specifications TT-P-1952D types I and II as well as TT-P-1952D/E/F types I and II. To ensure safety and environmental compliance, the product must adhere to all applicable VOC regulations and carry non-lead pigment certifications. The material is to be supplied and delivered in 275-gallon totes to meet project requirements. This procurement falls under NAICS code 325510 and is managed through the City of Houston in Texas.

City of Houston

POSTED

about 15 hours ago

DEADLINE

Traffic Paint and Pavement Marking in 275 Gal. Totes White TM2248

Solicitation # INF-2026-0458

The City of Houston is soliciting bids for the procurement of white traffic paint and pavement marking, specifically requiring Sherwin Williams Brand TM2248. The paint must be delivered in 275-gallon totes and is intended for industrial airport use, including long line striping for airfields, highways, and parking lots. The product must be a fast-drying waterborne paint formulated with non-lead pigments that conforms to current VOC regulations and Federal Specifications TT-P-1952D and TT-P-1952D/E/F types I and II. Technical requirements specify an application rate of 14-16 mils wet film thickness and a drying time of 10 minutes or less. The contract will be awarded to a responsive and responsible bidder based on the overall low net bid, though the City reserves the right to award by individual or combined items. Bidders must hold their pricing for at least 90 days and deliver items FOB destination as specified in individual purchase orders. Payment is due 30 days after invoice approval or acceptance of goods. Submission requirements include a signed official signature page and certifications regarding equal opportunity employment, anti-collusion, and compliance with various Texas Government Code anti-boycott laws. Preference may be given to designated City or Local Businesses under the Hire Houston First Program.

City of Houston

POSTED

about 15 hours ago

DEADLINE

Bridge Steel Coating and PaintingThis subcontract for Bridge Steel Coating and Painting involves providing and applying protective coatings to bridge steel components for prime contractors on Texas Department of Transportation projects located in Hall County. The scope of work includes comprehensive surface preparation through power tool cleaning or abrasive blasting, followed by the application of primer, intermediate, and finish coats using epoxy and polyurethane materials applied via industrial sprayers. All work must be performed in strict accordance with TxDOT coating specifications and SSPC standards to ensure the delivery of fully coated and painted bridge steel. Interested parties should note the response deadline of December 2, 2026, for this opportunity associated with NAICS code 325510.

Texas Department of Transportation

POSTED

about 16 hours ago

DEADLINE

Crack Sealant Material SupplyThe Town of Southampton is seeking a subcontractor for the supply of crack sealant materials to support road projects managed by the Highway Department. The selected provider will be responsible for manufacturing or distributing asphalt-based or rubberized crack sealing compounds that strictly adhere to the town's technical specifications. The scope of work includes the delivery of specified quantities of sealant directly to designated project sites or storage facilities for use by prime contractors. Interested parties must submit their responses by December 2, 2026, in accordance with the solicitation posted on November 5, 2026.

Town of Southampton

POSTED

about 17 hours ago

DEADLINE

Aircraft Coatings and Sealants OO-ALC

Solicitation # FA822427R0002

The Ogden Air Logistics Complex at Hill Air Force Base, Utah, is soliciting proposals for a total small business set-aside contract to manage and supply aircraft coatings and sealants. This Firm Fixed Price Indefinite Delivery/Indefinite Quantity contract encompasses a total period of performance of six years and two months, consisting of an eight-month ramp-up period, a five-year ordering period, and a six-month window for final deliveries. The selected contractor will be responsible for the sourcing, storage, and delivery of aerospace materials, including specialized Premixed Frozen Materials requiring transit at -80F and ITAR-compliant storage for FMS-3600 coatings. Key performance requirements include a strict four-hour delivery timeline for urgent orders and ensuring all products maintain at least 85 percent of their shelf life upon delivery. The scope of work extends beyond material supply to include technical assistance with rapid response times, monthly on-site support, and the provision of a secure web-based ordering and tracking system. Contractors must be CMMC Level 2 self-certified and adhere to strict military marking and packaging standards, including MIL-STD-129. Award will be based on a Best Value Source Selection Tradeoff methodology, where the technical proposal is significantly more important than price. Evaluation focuses on delivery fulfillment, material management, the online ordering system, technical assistance plans, prior experience, and the ramp-up plan. Proposals must be submitted electronically via the PIEE module in three distinct volumes: Technical, Price, and Contract Documentation.

FA8224 Afsc Ol H Pzim

POSTED

about 19 hours ago

DEADLINE

Well Head Sandblasting and PaintingThis subcontract involves providing surface preparation and protective coating services for well heads on City of Arcadia water projects. The scope of work requires the contractor to sandblast well heads to eliminate corrosion and old coatings before applying industrial-grade exterior protective paint in accordance with standard industrial painting specifications. The final deliverable is a fully sandblasted and painted well head. The project is located in Arcadia, California, under NAICS code 325510. Interested parties must submit their responses by November 19, 2026, following the posting date of November 5, 2026.

City Of Arcadia

POSTED

about 19 hours ago

DEADLINE

Polyurethane Coating Kit SupplierThis subcontract involves the supply of 5,000 specialized polyurethane coating kits, identified by NSN 8010015834774, to support prime contractors working on Defense Logistics Agency Troop Support Construction and Equipment contracts. The producing entity must possess a valid CAGE code and UEI, ensuring that all materials are delivered to Edwards AFB within a strict 20-day timeline. Compliance is critical for this requirement, as all packaging must adhere to MIL-STD-2073-1E and marking must follow MIL-STD-129 standards. The opportunity falls under NAICS code 325510 and was posted by the Department of Defense on November 4, 2026, with a response deadline of November 10, 2026.

Defense Logistics Agency

POSTED

DEADLINE

Epoxy Coating Kit Supplier (NSN 8010-01-686-6690)This subcontract involves the manufacture and supply of gray epoxy coating kits under NSN 8010-01-686-6690 for prime contractors supporting Department of Defense DLA supply contracts. The supplier is responsible for providing kits packaged in boxes of six 8-ounce units, ensuring all products are stored in temperature-controlled environments below 90 degrees Fahrenheit. Compliance with the Buy American Act and MIL-STD-129 is required, and all shipments must include SDS and Hazard Communication labels in accordance with Federal Standard No. 313-E and 29 CFR 1910.1200. The contract specifies that completed kits must be delivered FOB destination to the Point Mugu NAWC facility. Operating under NAICS code 325510, the supplier must adhere to all specified packaging and safety requirements to ensure material integrity and regulatory compliance upon delivery.

DLA PACKAGING REQUIREMENTS FOR PROCUREMENT STORE MATERIAL BELOW

POSTED

DEADLINE

Supply of Polyurethane Coating (NSN 8010-01-692-1311)This subcontract involves the supply of polyurethane coating materials meeting NSN 8010-01-692-1311 specifications to prime contractors supporting Department of Defense contracts through the DLA DIST OKC KO CP. The scope of work requires the manufacturer or source to provide full supply chain traceability in accordance with DLAD Procurement Notes C03 and adhere to MIL-STD-1916 quality control standards. Performance will take place at Tinker AFB, with strict requirements for packaging and labeling. Deliverables must comply with RP001, MIL-STD-129, and MIL-STD-2073-1E, while hazardous materials must be labeled per 29 CFR 1910.1200. The final delivery consists of the specified coating materials accompanied by all necessary traceability documentation.

DLA DIST OKC KO CP

POSTED

DEADLINE

Marine Corrosion Control and FinishingThe Marine Corrosion Control and Finishing subcontract is issued by the Department of Defense for the DLA Weapons Support Fluid Handling Division. The selected contractor will provide specialized surface treatments and marine-grade coatings for hatch components, including sandblasting, chemical cleaning, and the application of polyurethane or epoxy coatings in accordance with naval standards. To execute these requirements, the contractor must utilize industrial spray booths and curing ovens and maintain strict safety compliance by providing Safety Data Sheets per 29 CFR 1910.1200. This opportunity is designated as a Total Small Business Set-Aside under NAICS code 325510, with performance taking place in New Cumberland. Interested parties must submit their responses by November 16, 2026. The scope of work focuses on delivering finished, coated components that meet rigorous military specifications for corrosion control.

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

DEADLINE

EPOXY COATING KIT

Solicitation # SPE8ES-27-T-0273

Solicitation SPE8ES-27-T-0273 is a request for quotations for the procurement of one box of gray epoxy coating kits, identified by NSN 8010-01-686-6690. Each box contains six kits of 8 ounces each. The product is subject to a strict shelf-life requirement of six months from the date of manufacture when stored at room temperature, or nine months when stored below 40 degrees Fahrenheit. Material must be stored below 90 degrees Fahrenheit. The delivery is set for 20 days after the award, with a required delivery date of November 6, 2026, shipped FOB destination to the OPNAV Sea Duty Component at Point Mugu NAWC in California. Due to the hazardous nature of the materials, the contractor must comply with Federal Standard No. 313-E and 29 CFR 1910.1200, requiring the submission of Safety Data Sheets and Hazard Communication Standard labels for review and approval prior to the award. Packaging and marking must adhere to MIL-STD-129 and DLA packaging requirements. The contract incorporates various FAR and DFARS clauses, including those regarding the Buy American Act, safeguarding covered defense information, and the prohibition of hexavalent chromium. Invoicing and receiving reports must be processed electronically through the Wide Area WorkFlow system.

DLA PACKAGING REQUIREMENTS FOR PROCUREMENT STORE MATERIAL BELOW

POSTED

DEADLINE

POLYURETHANE COATING

Solicitation # SPE8ES-27-T-0267

This fixed-price solicitation, issued by the Defense Logistics Agency Troop Support Construction and Equipment, is for the procurement of five polyurethane coating kits under NSN 8010-01-583-4774. The coating is designed for aircraft surfaces, specifically Type 4 for extended weather ability and Class H high-solids formulation, in Gloss Green color per FED-STD-595. Each kit consists of a pigmented polyester resin and solvent (Component A) and a clear aliphatic isocyanate (Component B), totaling two quarts, and must comply with MIL-PRF-85285. Delivery is required within 20 days after award to Edwards Air Force Base, California, with destination inspection and acceptance. The contract mandates strict adherence to hazardous material standards, requiring the submission of Safety Data Sheets and labels consistent with 29 CFR 1910.1200. Packaging must follow MIL-STD-2073-1E and RP001, with marking conducted per MIL-STD-129, including the lot or batch number on each kit label. Storage temperatures must be maintained between 60-80 degrees Fahrenheit. Administrative requirements include the use of the Wide Area WorkFlow system for invoicing and compliance with various FAR and DFARS clauses regarding the Buy American Act, cybersecurity safeguarding of covered defense information, and the prohibition of certain telecommunications equipment. All quotes must be submitted via the DIBBS portal by November 10, 2026.

Defense Logistics Agency

POSTED

DEADLINE

More opportunities from Department Of Energy → Western-Desert Soutwest Region

Same awarding agency

Bare Static Wire Damper SupplierThis SBA set-aside subcontract through the Department of Energy's Western-Desert Southwest Region requires the supply of 50 dampers for bare static wires to support prime contractors on Western Area Power Administration projects. The required equipment consists of .49-.60 dampers for 1/2 inch bare static wire, specifically specifying Preformed Line Products PN: DB 1-12 Dogbone Dampers or an approved equal. The selected supplier is responsible for ensuring all packaging complies with DOE-D-2001 standards. Additionally, the contractor must handle the delivery and unloading of all units to a designated ground-level pad at the DSW Warehouse. Responses for this opportunity are due by November 12, 2026.

All Other Miscellaneous Electrical Equipment and Component Manufacturing

POSTED

DEADLINE

Galvanized Turnbuckle SupplierThis SBA set-aside subcontract through the Department of Energy's Western-Desert Southwest Region requires the supply of 200 galvanized turnbuckles for prime contractors working on Western Area Power Administration power line projects. The specified hardware must be 3/4 inch by 9 inch bolt diameter turnbuckles with jaw and jaw end fittings and a strength rating of 28,000 lbs, meeting the standards of Hughes Brothers part number AS2545-A or an approved equal. The selected supplier is responsible for ensuring all packaging complies with DOE-D-2001 standards. Delivery requirements include the transport and unloading of all units to a ground-level pad at the DSW Warehouse. Responses for this procurement are due by November 12, 2026.

Hardware Manufacturing

POSTED

DEADLINE

PURCHASE OF WAREHOUSE STOCK - TURNBUCKLES, BOLTS,

Solicitation # 89503127QWA000428

The Department of Energy, through the Western-Desert Southwest Region, is soliciting a firm fixed-price purchase order for warehouse stock items, including 200 galvanized turnbuckles, 24 bottles of electrical contact aid oxide inhibitor, and 50 dampers for bare static wire. This procurement is 100% set-aside for small businesses, with the award being granted to the responsible small business providing the lowest price technically acceptable quotation. Technical evaluations will focus on whether products meet or exceed the specified salient characteristics, and offerors must provide detailed product documentation and estimated delivery lead times. Delivery is required within 30 days after award on a FOB Destination basis to the DSW Warehouse in Phoenix, Arizona, with the contractor responsible for unloading equipment to a ground level pad. Packaging must follow good commercial practices and DOE-D-2001 standards, and the contractor must notify the DSW Warehouse and the Contracting Officer one work day prior to shipping. Invoicing must be processed electronically through the U.S. Department of the Treasury's Invoice Processing Platform System. The contract incorporates various FAR clauses, including requirements for the Buy American Act, sustainable products, and prohibitions on trafficking in persons.

Hardware Manufacturing

POSTED

DEADLINE

Earlier notices in this NAICS code

Posted before this notice, open and closed

POLYURETHANE COATING

Solicitation # SPE8ES-27-T-0272

DLA DIST OKC KO CP

POSTED

DEADLINE

POLYURETHANE COATING

Solicitation # SPE8ES-27-T-0234

Defense Logistics Agency

POSTED

DEADLINE

POLYURETHANE COATING

Solicitation # SPE8ES-27-Q-0013

Defense Logistics Agency

POSTED

DEADLINE

Acrylic Elastomeric Top Coat Supplier

USP Terre Haute

POSTED

DEADLINE

Supply of Epoxy Single Coat HS OAP Primer Blue Kits

DLA Maritime - Pearl Harbor

POSTED

DEADLINE

Solicitation # SPMYM427Q3044

DLA Maritime - Pearl Harbor

POSTED

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS