Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, December 9 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

Electrical Distribution and EV Infrastructure

Open

State & Local

Response Deadline11/20/2026, 02:00:00 PM EST

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract focuses on the delivery of electrical distribution and EV charging infrastructure for CTtransit facility projects located in Watertown, Connecticut. Working under prime contractors, the selected provider will perform critical electrical upgrades, including the installation of switchboards, panelboards, low-voltage power conductors, grounding, bonding, and underground raceways. All work must be executed in strict accordance with NFPA 70 National Electrical Code standards. Managed by DAS Procurement for the state of Connecticut, the project falls under NAICS code 238210. The solicitation was posted on October 9, 2026, with a response deadline set for November 20, 2026. Interested parties can find further details through the CTSource Bid Board.

General Info

Electrical distribution and EV charging infrastructure installation for CTtransit facilities in Watertown, Connecticut.

Agency

Connecticut → DAS Procurement

NAICS

238210 - Electrical Contractors and Other Wiring Installation Contractors

Place of Performance

CT, USA

Set-Aside

NONE

Documents

This scope was carved out of 10-01.

The full solicitation package (11 documents), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

MEP & FP UPGRADES & EV CHARGER

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedOct 9

subcontract

Response DeadlineNov 20

Submission deadline

Response Deadline

11/20/2026, 02:00:00 PM ESTin 7 days

Ready to pursue this opportunity?

Get full access to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyConnecticut → DAS Procurement

ContactsNo contacts available

OfficeN/A

Organization / AgencyConnecticut → DAS Procurement

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Performs electrical upgrades for prime contractors on CTtransit facility projects in Watertown, CT. Installs switchboards, panelboards, low-voltage power conductors, grounding, bonding, and underground raceways per NFPA 70 (NEC). Delivers completed electrical distribution and EV charging infrastructure.

Similar Contracts

Same NAICS industry code

26-140 Installation of Emergency Shut Off Switches

Solicitation # 26-140

Solicitation 26-140 is a request for proposals for the installation of emergency shut-off switches on power tools at the Atterbury Job Corps Center in Edinburgh, Indiana. Operated by Adams and Associates for the U.S. Department of Labor, the project specifically targets the Facility Maintenance Shop to mitigate risks associated with dangerous rotating equipment. The scope of work requires the installation of two mushroom-head push-button emergency shut-off switches and a new 60A, 208/120V, 3-phase, 4-wire, 6-circuit branch circuit panel featuring a 60A shunt-trip main circuit breaker. All work must comply with OSHA, EPA, and national building codes, with Indiana state regulations taking precedence if they are more stringent. The contract is a small business set-aside and requires a single lump sum bid with a detailed cost breakdown, a timeline for substantial completion, and a minimum 90-day bid guarantee. Award will be based on best value, evaluated by price (60 points), quality (20 points), past performance (10 points), and schedule (10 points). Mandatory requirements for bidders include attendance at the site pre-bid conference on November 10, 2026, and a proposal submission deadline of November 20, 2026. Qualified contractors must provide a valid Indiana Contractor's License, proof of comprehensive insurance naming Adams and Associates and the Atterbury Job Corps Center as additional insureds, and certification of compliance with Davis Bacon Act wage rates. Upon award, the contractor must provide a sequenced construction schedule within 10 days of the Notice to Proceed. Final acceptance involves a two-stage process of substantial completion and final inspection, with a requirement to correct punch list items within 14 days. The contractor must provide all necessary training, operating manuals, and a one-year guarantee on workmanship. Payment is issued on Net 30 terms following the submission of subcontractor releases of claims and final inspections.

Atterbury Job Corps. – Adams & Associates

POSTED

about 4 hours ago

DEADLINE

Transformer Oil Testing Services

Solicitation # RFP-VC-26-010

The Inland Empire Utilities Agency is soliciting proposals under RFP-VC-26-010 for professional transformer oil testing services to enhance the reliability, safety, and maintainability of its transformers. The scope of work is divided into three primary areas: conducting visual and infrared thermographic inspections to identify thermal anomalies, installing standardized external oil sampling devices to improve safety during collection, and performing comprehensive oil testing and analysis. Additionally, the selected contractor will evaluate nitrogen blanket systems to ensure positive pressure is maintained, provide on-site training for agency staff on inspection methods, and develop standard operating procedures for oil maintenance and testing. All work must adhere to NETA MTS standards, IEEE guidelines, NFPA 70E safety protocols, and ASTM D923 and D924 specifications. This is a fixed-price contract with a not-to-exceed total value, intended as a single award to the most capable and cost-effective offeror, though the agency reserves the right to make multiple awards. Proposals are due by December 23, 2026, via PlanetBids and must include a detailed staffing plan, methodology, and evidence of similar project experience with utilities or industrial facilities. Evaluation criteria emphasize the contractor's ability to meet the project timeline, their technical approach to cybersecurity and safety, and their fee structure. Awardees must be registered public works contractors with the Department of Industrial Relations and provide comprehensive insurance certifications. Payment will be processed electronically via ACH within 30 days of invoice approval by the Project Manager.

Inland Empire Utilities Agency

POSTED

about 4 hours ago

DEADLINE

in about 1 month

Purified Water Replenishment San Jacinto Valley Advanced Water Purification Facility

Solicitation # purified-water-replenishment-san-jacinto-valley-advanced-water-purification-facility-2

Axia Electric LLC is soliciting bids from SBE/DBE certified firms for the Purified Water Replenishment San Jacinto Valley Advanced Water Purification Facility and Brine Ponds project in California. The requested scopes of work include low voltage systems, fiber optics, and the supply of electrical materials. Bids must be submitted by 2:00 PM on November 18, 2026, with a final deadline of November 19, 2026. Interested parties should contact Ryan Falk for quote submissions or Amy Roller for access to contract documents, plans, and specifications. Qualified bidders must be registered to perform public work pursuant to Labor Code Section 1725.5 and must adhere to the AGC Master Labor Agreements and the terms of the prime contract. Minimum insurance requirements include 1 million dollars for auto liability and workers compensation, 5 million dollars for excess liability, and general liability coverage of 1 million dollars per occurrence, 2 million dollars aggregate, and 2 million dollars for completed operations. Submission of a bid constitutes acceptance of Axia's Standard Long Form Subcontract or Purchase Order. Evaluation will consider SBE/DBE certification and any lower-tier participation provided within the quote.

POSTED

about 4 hours ago

DEADLINE

Centennial JCC Emergency Lighting Replacement, Upgrade, Testing & Maintenance Services

Solicitation # centennial-jcc-emergency-lighting-replacement-upgrade-testing-maintenance-services

Management and Training Corporation is soliciting bids for a fixed-price, single lump sum contract to provide emergency lighting replacement, upgrade, testing, and maintenance services at the Centennial Job Corps Center in Nampa, Idaho. The project involves engaging a qualified electrical contractor to inspect, repair, and certify emergency lighting systems to ensure 100% operational status. Key technical requirements include compliance with NFPA 101 (2024 Edition), NFPA 70 (National Electrical Code), and OSHA safety regulations. The contractor must apply durable, uniquely numbered labels to each fixture for future tracking and provide manufacturer and installer warranties upon completion. The estimated contract value ranges from $25,000 to $100,000. Bids are due by December 1, 2026, and must include a detailed cost breakout on company letterhead. A mandatory physical site visit is required prior to bid submission. For bids equal to or greater than $25,000, a bid bond of 20% of the base bid is required, and the awarded contractor must provide performance and payment bonds from a surety with at least an A- rating. Award decisions will be based on overall best value. This opportunity is set aside for small businesses, including VOSB, SDVOSB, WOSB, and HUBZone certified firms. The contract is subject to the Davis-Bacon Act, requiring the payment of prevailing wage rates for building construction in Canyon and Gem Counties, Idaho. Additionally, contractors must comply with FAR 52.222-4 regarding overtime compensation and EO 13706 regarding paid sick leave. First-tier subcontractors with awards exceeding $45,000 must provide debarment disclosure per FAR 52.209-6.

Management & Training Corporation/Centennial Job Corps Center

POSTED

about 4 hours ago

DEADLINE

ASO-1489-00 Installation of Distance Measuring Equipment (DME) on runway 15 at the Charleston International Airport in Charlston, SC

Solicitation # aso-1489-00-installation-distance-measuring-equipment-dme-runway-15-charleston-international-airport

This solicitation, identified as ASO-1489-00, involves the construction and installation of Distance Measuring Equipment (DME) collocated with the Runway 15 LOC at Charleston International Airport in South Carolina. Managed by Parsons, the project falls under NAICS code 238210 and is specifically designated as a set-aside for various small business types, including SBA certified Veteran Owned, Service-Disabled Veteran Owned, Women-Owned, and HUBZone small businesses. Interested parties must submit their responses by the deadline of November 27, 2026. The primary point of contact for this opportunity is Quentin Wack. This project represents a targeted effort to enhance aviation infrastructure at the Charleston facility through qualified small business participation.

POSTED

about 4 hours ago

DEADLINE

AMC-0235 TBD VOR Public Announcement

Solicitation # amc-0235-tbd-vor-public-announcement

This solicitation, issued by PTSI Managed Services Inc. (Parsons), involves a comprehensive construction project located in Louisiana. The scope of work encompasses a variety of facility improvements, including electrical work and grounding system repairs, roofing installation, plumbing replacements, grading, painting, and door repairs. The estimated magnitude of construction for these services is valued between 500,000 and 1,000,000 dollars. The opportunity is designated as an SBA set-aside, specifically open to Small Businesses, including Small Disadvantaged Businesses, Women-Owned Small Businesses, HUBZone Small Businesses, and Veteran-Owned Small Businesses. Interested parties must respond by November 16, 2026. The project falls under NAICS code 238210, and primary inquiries should be directed to Kurtis Kinard.

PTSI Managed Services Inc. (Parsons)

POSTED

about 4 hours ago

DEADLINE

ASO-0728-00 DME Shelter Installation in Shelby, NC

Solicitation # aso-0728-00-dme-shelter-installation-shelby-nc

Parsons Corporation is soliciting bids for the installation of a DME shelter in Shelby, North Carolina. The scope of work includes the installation of a shelter furnished by others, along with the DME antenna, associated foundations, junction box, meter rack, underground conduit, grounding, and conductors. This opportunity is open to various small business classifications, including SBA certified Veteran Owned, Service-Disabled Veteran Owned, Women-Owned, and HUBZone Small Businesses. Interested parties must submit their responses by December 30, 2026.

Parsons Corporation

POSTED

about 4 hours ago

DEADLINE

in about 2 months

FRSMP277009/JLM-Lighting Phase 2

Solicitation # WMATA-0000010972

The Washington Metropolitan Area Transit Authority is soliciting bids for contract FRSMP277009/JLM-Lighting Phase 2 under solicitation number WMATA-0000010972. This project falls under NAICS code 238210, which pertains to electrical contracting and related lighting services. The solicitation was posted on November 13, 2026, and requires all responses to be submitted by the deadline of December 2, 2026. Interested parties can access further details and manage their bids through the official WMATA supplier portal.

Washington Metropolitan Area Transit Authority

POSTED

about 4 hours ago

DEADLINE

Fire Alarm and Suppression SystemsThis subcontract, issued by Bristol Alliance of Companies, involves the installation of automatic fire sprinkler systems, smoke and heat detection, and fire alarm and mass notification systems for NAVFAC and US Navy projects at NBK Bangor. The scope of work specifically includes the installation of Silent Knight IFP-2000 FACPs, voice evacuation panels, addressable pull stations, and smoke detectors to deliver a fully certified fire alarm and sprinkler system. Qualified bidders must be licensed fire protection contractors and are required to coordinate closely with the Government Fire Protection Engineer. The project falls under NAICS code 238210, with a response deadline set for December 5, 2026.

Bristol Alliance of Companies

POSTED

about 12 hours ago

DEADLINE

Electrical Distribution and LightingThis subcontract for Electrical Distribution and Lighting involves the installation of interior electrical wiring, fixtures, switches, and outlets for prime contractors on NAVFAC and US Navy projects located at NBK Bangor. The scope of work includes the installation of concealed electrical metal conduits, Schedule 40 PVC for underground wiring, and bolt-on circuit breakers. A specific requirement is the provision of LED illumination maintaining 30-50 foot-candles for Access Control Rooms, with all installations requiring separate power and lighting circuits. All work must strictly conform to NFPA 70 National Electrical Code standards to deliver a fully operational electrical and lighting system. The project is managed by the Bristol Alliance of Companies under NAICS code 238210. Interested parties must note the response deadline of December 5, 2026.

Bristol Alliance of Companies

POSTED

about 12 hours ago

DEADLINE

Building G Generator Replacement - HQ

Solicitation # 405-27R0002844

The Texas Department of Public Safety (DPS) is soliciting proposals for the replacement of the existing generator at the DPS Headquarters Campus in Building G, located in Austin, Texas. The project scope involves the demolition and removal of the old equipment and the installation, configuration, and testing of a new, fully operational generator system. All work must adhere to approved construction documents and technical standards, including ANSI/NFPA 70, NEMA 250, NEMA MG1, and MIL E-4970A. A key performance requirement is the certification that a service mechanic will be on site within four hours if the generator fails to start. Proposals are due by 5:00 P.M. Central Time on November 19, 2026, via the DPS Online Bid Room or email. Award decisions will be based on a best value standard, evaluating indicators of probable vendor performance (40 points), technical requirements (30 points), and cost (30 points). Mandatory requirements include the submission of a project plan and schedule within ten business days of a kickoff meeting, and the provision of performance and payment bonds for contracts exceeding specific thresholds. Vendors must also comply with Texas state laws regarding HUB certification, cybersecurity training, and specific wage and sick leave requirements.

Department of Public Safety

POSTED

about 12 hours ago

DEADLINE

Low Voltage Cabling & Fiber Optic InfrastructureThis subcontract for Low Voltage Cabling and Fiber Optic Infrastructure involves the supply and installation of a communication backbone for a fire alarm replacement project at the California State Prison, Solano. Working under prime contractors for the California Department of Corrections and Rehabilitation, the selected provider will install new fiber pathways, secure conduits, and cabling to ensure reliable signal monitoring between various buildings, the onsite fire house, and central control. The scope of work focuses on the delivery of completed fiber and cable pathways with verified network connectivity using fiber optic cabling. This project falls under NAICS code 238210, with a response deadline set for February 1, 2027.

California Department of Corrections & Rehabilitation

POSTED

about 12 hours ago

DEADLINE

More opportunities from Connecticut → DAS Procurement

Same awarding agency

Automated Side Loader Refuse Truck

Solicitation # 2027-027

POSTED

about 6 hours ago

DEADLINE

RNP2025-2 Broad River Baseball Complex

Solicitation # 4546

POSTED

about 14 hours ago

DEADLINE

in about 2 months

Police Complex Parking Garage Engineering Services

Solicitation # 2P27-028

The City of Bristol, Connecticut, is seeking qualified engineering teams to provide comprehensive services for the Police Complex parking garage, encompassing investigation, structural rehabilitation, waterproofing design, bidding assistance, and construction services. The scope of work includes concrete repairs to spiral ramps and garage levels, waterproofing, MEP repairs for floor drains and electrical systems, and architectural updates such as steel painting and ADA-compliant pavement markings. The selected firm must provide design documents at 30, 60, 90, and final bid stages, along with independent cost estimates and a final maintenance plan. This is a two-stage procurement process. Stage I is a Request for Qualifications (RFQ) where firms are evaluated on their capability, relevant experience with occupied parking structures, and the qualifications of key personnel, including a Connecticut-licensed structural engineer of record. Fees and costs are not considered during this initial phase. Firms determined to be qualified will proceed to Stage II, a Request for Proposals (RFP), which will require a project-specific approach, a detailed investigation and risk plan, a task matrix, and a project schedule. Administrative requirements include a submission deadline of January 5, 2027, via the City's bidding portal. Standard payment terms are Net 30 Days, and the City prohibits payments upon contract execution. Firms must provide a Non-Collusion Certification and adhere to Equal Employment Opportunity Act requirements, which include an Affirmative Action Plan for firms with 15 or more employees or a written equal opportunity policy for smaller firms. The engineer is also responsible for quality-control reviews, constructability and risk assessments at the 90 percent design stage, and periodic field oversight during critical construction operations.

POSTED

about 14 hours ago

DEADLINE

Preventive Maintenance (PM) ServicesThis subcontract for Preventive Maintenance (PM) Services, managed by DAS Procurement for the State of Connecticut, focuses on extending the operational life of equipment through scheduled maintenance for prime contractors. The scope of work includes performing visual inspections, verifying safety devices, cleaning components, lubricating moving parts, and conducting equipment calibration. To ensure quality and compliance, service providers must hold trade-specific licenses, such as the EPA 608 certification for refrigeration work, and are required to submit completed PM Service Reports for every piece of equipment serviced. The opportunity is categorized under NAICS code 811310 and was posted on November 12, 2026, with a response deadline of December 3, 2026. Interested parties can find further details and submission guidelines through the CTSource Bid Board portal.

Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and Maintenance

POSTED

about 16 hours ago

DEADLINE

Cooking, Warewashing, and Food Preparation Equipment RepairThis subcontract agreement involves the inspection, diagnosis, and repair of commercial cooking and food preparation equipment for prime contractors working on State of Connecticut DAS projects. The scope of work covers a wide range of kitchen machinery, including ranges, ovens, convection and combi ovens, fryers, steamers, kettles, and warewashing equipment, while incorporating gas line maintenance and the use of commercial appliance components. The primary objective is to restore equipment to full operational status and provide detailed service reports. Managed by DAS Procurement for the state of Connecticut under NAICS code 811310, the contract was posted on November 12, 2026, with a response deadline of December 3, 2026. Interested parties can find further information through the CTSource Bid Board.

Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and Maintenance

POSTED

about 16 hours ago

DEADLINE

Commercial Refrigeration Repair and MaintenanceThis subcontract for Commercial Refrigeration Repair and Maintenance involves providing inspection, diagnosis, and repair services for commercial refrigeration equipment on State of Connecticut DAS projects. The scope of work includes the maintenance of walk-in coolers, freezers, reach-in units, refrigerated prep tables, ice machines, and blast chillers to ensure restored operational status, with the requirement that service reports be delivered upon completion. Qualified providers must hold a D-3 Limited Cooling Contractor license and a D-4 Limited Cooling Journeyperson license, along with EPA Section 608 certification for all refrigerant circuit work. The opportunity is managed by DAS Procurement for the State of Connecticut, with a response deadline of December 3, 2026.

Plumbing, Heating, and Air-Conditioning Contractors

POSTED

about 16 hours ago

DEADLINE

Asphalt Mix SupplyThis subcontract agreement, managed by DAS Procurement for the state of Connecticut, involves the supply of asphalt materials for Plainfield Public Schools facility projects. The selected vendor is responsible for manufacturing and delivering hot mix asphalt specifically designed for a 3.5 inch base installation using a two-lift process. To ensure quality and compliance, the contractor must provide all necessary material certifications and obtain formal approval for the mix design. The scope of work focuses on the production and transportation of the required asphalt tonnage directly to the project site to support prime contractors. Interested parties must submit their responses by December 7, 2026, in accordance with the solicitation posted on November 12, 2026.

Asphalt Paving Mixture and Block Manufacturing

POSTED

about 16 hours ago

DEADLINE

Synthetic Surface Removal and DisposalThis subcontract, titled Synthetic Surface Removal and Disposal, is issued by DAS Procurement for Connecticut. The project requires a contractor to perform the mechanical removal of existing synthetic track surfaces at Plainfield Public Schools facilities. The scope of work includes the removal, loading, and hauling of all debris to a legal disposal site, with the final deliverable being a cleared site prepared for asphalt pulverization. The selected contractor must provide evidence of legal disposal through dump site receipts. Interested parties should note that the response deadline is December 7, 2026, and the project falls under NAICS code 238910.

Site Preparation Contractors

POSTED

about 16 hours ago

DEADLINE

Asphalt Base Installation and GradingThis subcontract for Asphalt Base Installation and Grading involves the demolition of existing asphalt and the installation of a new structural asphalt base for prime contractors working on Plainfield Public Schools facility projects. The scope of work includes pulverizing asphalt with a traveling hammermill, performing laser grading to ASBA tolerances, and installing a 3.5 inch asphalt base across two lifts using compaction rollers. The final deliverable is a laser-graded and compacted asphalt base prepared for synthetic surfacing. Managed by DAS Procurement for the state of Connecticut under NAICS code 237310, the solicitation was posted on November 12, 2026. Interested parties must submit their responses by the deadline of December 7, 2026, at 4:00 PM.

Highway, Street, and Bridge Construction

POSTED

about 16 hours ago

DEADLINE

Athletic Surface Installation (BSS-100 or Equivalent)This subcontract for Athletic Surface Installation involves the delivery of a competition-ready synthetic running track system for Plainfield Public Schools facility projects. The scope of work requires the application of an NFHS-compliant certified line marking system and the installation of a BSS-100 polyurethane paved mat structural spray system or an approved equivalent. To ensure quality and technical standards, the project mandates that an ASBA Certified Track Builder be employed for performance or direct supervision. Managed by DAS Procurement for the state of Connecticut, this opportunity falls under NAICS code 238990. The solicitation was posted on November 12, 2026, with a response deadline set for December 7, 2026. The final deliverable is a fully resurfaced and certified running track ready for competitive athletic use.

All Other Specialty Trade Contractors

POSTED

about 16 hours ago

DEADLINE

RFP #2027-0002 Track Replacement Resurfacing Project

Solicitation # 2027-0002

Plainfield Public Schools is soliciting sealed bids for the renovation of the running track at Plainfield High School in Connecticut. The project requires a qualified athletic-surface contractor to provide a complete, competition-ready system, which includes the removal and legal disposal of the existing synthetic surface, pulverizing the asphalt base to a depth of eight inches, and installing a BSS-100 polyurethane paved mat structural spray system or an approved equivalent. The scope also encompasses laser grading to ASBA tolerances, a one percent cross slope toward the infield, and the installation of NFHS-compliant certified line markings. The contract is structured as a firm, lump-sum price agreement with an anticipated award date of December 2026. Payment terms include a 15 percent deposit upon acceptance, followed by bi-monthly payments based on a schedule of values. Award decisions will be based on the best interest of the District rather than the lowest price, with evaluation factors including technical approach, materials, and the qualifications of key personnel, specifically requiring an ASBA Certified Track Builder. Contractors must provide a performance bond for 100 percent of the contract cost and evidence of insurance within ten business days of the award. Submissions must be delivered as two hard copies to the Superintendent of Plainfield Public Schools by the specified deadline.

All Other Specialty Trade Contractors

POSTED

about 16 hours ago

DEADLINE

Commercial Refrigeration and Foodservice Equipment Repair and PM Services

Solicitation # 26PSX0209

The State of Connecticut, through DAS Procurement, is soliciting bids for repair and preventive maintenance services for commercial refrigeration, cooking, warewashing, and food preparation equipment. The contract covers State Agencies and Department of Corrections (DOC) facilities throughout the state for a three-year term, with the possibility of extensions. Contractors may bid on one or both equipment categories and may optionally elect to provide services to DOC facilities. Service requirements include strict response times for Priority One refrigeration requests, requiring acknowledgment within 30 minutes and on-site arrival within 4 hours for general agency locations or 12 hours for DOC facilities. Preventive maintenance tasks involve visual inspections, safety device verification, cleaning, lubrication, and calibration, with all work performed according to manufacturer recommendations and industry best practices. Payments are processed via ACH or P-Card, with standard terms of 45 days, or 25 days for certified small or minority business enterprises. Contractors must comply with Connecticut General Statutes regarding standard wage rates, consumer data privacy, and non-discrimination laws, as well as the Americans with Disabilities Act. All delivered goods must be the latest standard new models unless otherwise specified, and contractors are required to minimize environmental impacts associated with packaging and disposal.

Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and Maintenance

POSTED

about 16 hours ago

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Get full access

Join 750+ contractors already using CLEATUS