Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, September 16 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

Electrical Installation

Active

Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract titled Electrical Installation is a subcontract under the Defense Logistics Agency within the Department of Defense, focused on the installation of power distribution, lighting, and control systems including all necessary conduit and wiring components. It was posted on June 25, 2026, and is classified under NAICS code 238210, which corresponds to electrical contracting services. The place of performance and specific location details are not provided, and no set-aside type or organizational restrictions are specified. The contract reference is linked to the DIBBS system with the identifiers SPE8ES24D0005, SPE8ES26F50EZ, and contract count 283620, indicating it is part of a larger procurement structure managed through the Defense Logistics Agency's procurement network. There is no designated point of contact listed in the provided data.

General Info

Electrical installation subcontract for DLA under NAICS 238210 with three DIBBS identifiers.

Agency

Department Of Defense → Defense Logistics AgencyView Agency

NAICS

238210 - Electrical Contractors and Other Wiring Installation ContractorsView NAICS

Place of Performance

Not specified

Set-Aside

NONE

Documents

This scope was carved out of SPE8ES26F50EZ.

The full solicitation package (2 documents), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

SEALING COMPOUND

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJun 25

subcontract

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → Defense Logistics Agency

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → Defense Logistics Agency

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Installation of power distribution, lighting, and control systems including conduit and wiring.

Similar Contracts

Same NAICS industry code

LED Lighting & Occupancy Sensor Upgrade @ Batavia SPC

Solicitation # 70CMSW25R00000011

Solicitation 70CMSW25R00000011 is for an LED lighting and occupancy sensor upgrade at the Immigration and Customs Enforcement (ICE) Batavia Service Processing Center in Batavia, New York. The project involves the removal and disposal of existing fluorescent fixtures, lamps, and ballasts, and the installation of energy-efficient LED lighting and occupancy sensors. The scope includes all necessary labor, supervision, equipment, materials, testing, and the provision of 5 percent attic stock. The base period of performance is 180 calendar days from the notice to proceed. The contractor must adhere to a wide range of technical and safety standards, including the National Electrical Code, NFPA, International Building Code, ADA, OSHA, and Performance-Based National Detention Standards. Key deliverables include a Quality Control Plan to be submitted within 15 days of award and the implementation of a lighting system where at least 98 percent of fixtures are fully operational. The contract is subject to the Davis-Bacon Act for prevailing wages in Genesee County and requires performance and payment bonds. Pricing is based on a detailed CSI division breakdown, and all clarification questions must be submitted via the official template by September 14, 2026.

Bristol Alliance of Companies

POSTED

about 11 hours ago

DEADLINE

Existing Generators Replacement Aguadilla, PR

Solicitation # 872298

This project involves the complete replacement of two existing power generators at the Aguadilla Detention Facility in Aguadilla, Puerto Rico. The scope of work requires the installation of one 100 kW and one 150 kW Perkins diesel generator, both featuring stainless-steel enclosures to protect against salt air and moisture. The installation includes two new NEMA 3R automatic transfer switches, securing the units to the existing concrete slab with Grade 5 or higher galvanized anchor bolts, and performing comprehensive generator load tests. The project is estimated to have a magnitude between $250,000 and $300,000, with a total period of performance of 270 calendar days from the Notice to Proceed. The contract is a Firm-Fixed-Price task order issued under an 8(a) Multiple Award Construction Contract (MACC) IDIQ. Award will be based solely on the lowest total evaluated price, provided the offeror demonstrates technical understanding, a sound implementation approach, and a robust safety and quality control program. Key compliance requirements include adherence to the Buy American Act, Davis-Bacon prevailing wage rates per determination PR20260001, and strict security protocols, including PIV card issuance and non-disclosure agreements for personnel. All work must be performed during regular business hours, Monday through Friday, and must comply with NFPA 70, the International Building Code, and NEC Article 445.

Bristol Alliance of Companies

POSTED

about 11 hours ago

DEADLINE

LED Lighting and Occupancy Sensor Upgrades DRAFT

Solicitation # 872291

The LED Lighting and Occupancy Sensor Upgrade project is a Firm-Fixed-Price task order issued under an 8(a) Multiple Award Construction Contract (MACC) for the Buffalo Federal Detention Facility in Batavia, New York. The project involves providing all engineering, labor, equipment, and materials to upgrade the facility with energy-efficient LED lighting fixtures and occupancy sensors, including the removal and disposal of existing fluorescent fixtures, lamps, and ballasts. The estimated magnitude of the contract is between 2 million and 2.3 million dollars, with a period of performance of 180 calendar days from the notice to proceed. Award will be based solely on the lowest total evaluated price. The contractor is required to adhere to Davis-Bacon Act wage determinations and comply with standards from OSHA, ADA, NFPA, and the International Building Code. Key deliverables include a Quality Control Plan due within 15 days of award, a site survey within 30 days, and a final closeout package consisting of as-built drawings, warranty documentation, and 5 percent attic stock. The contractor must also provide a minimum two-hour training session for facility maintenance personnel and a detailed commissioning report verifying that 100 percent of fixtures and controls were tested. Payment requests must be submitted electronically via the Invoice Processing Platform and accompanied by certified payroll.

Bristol Alliance of Companies

POSTED

about 11 hours ago

DEADLINE

Conex Offices for Forensics Personnel - St. Thomas

Solicitation # 872300

This project involves a Firm-Fixed-Price task order under an 8(a) Multiple Award Construction Contract for the provision and installation of two 40ft steel FLEXTAINER conex offices for forensics personnel at the St. Thomas HSI Facility in the US Virgin Islands. The scope of work includes the construction of 3k PSI reinforced concrete slabs, installation of the units, and equipping each office with two split-system A/C units, R-11 insulation, vinyl flooring, LED lighting, and a steel door with a Cypher lock. Each unit must also include four security windows and a 5-pound ABC fire extinguisher. Electrical connectivity must be established via 2-inch PVC or uPVC conduit to the nearest circuit. The contract has an estimated magnitude between 250,000 and 300,000 dollars, with a period of performance of 364 calendar days from the Notice to Proceed. Award will be based on the lowest total evaluated price, considering technical approach, safety, and quality control plans. Key requirements include compliance with the Buy American Act, adherence to Davis-Bacon prevailing wage rates for the Virgin Islands, and strict security protocols, including the signing of DHS Non-Disclosure Agreements and mandatory cybersecurity training. Contractors must conduct a site survey prior to proposal submission and provide a detailed project schedule within 15 days of the Notice to Proceed. All invoicing must be processed through the Invoice Processing Platform and accompanied by certified payroll.

Bristol Alliance of Companies

POSTED

about 11 hours ago

DEADLINE

Town of Thurmont – Hunting Creek PFAS Improvements

Solicitation # town-thurmont-hunting-creek-pfas-improvements

Conewago Enterprises, Inc. is soliciting bids from qualified Disadvantaged Business Enterprises for the Town of Thurmont Hunting Creek PFAS Improvements project located in Maryland. The deadline for bid submissions is October 2, 2026, at 12 PM EST, though this date may be subject to change via addendum. Available subcontracting and supply opportunities cover a wide range of trades, including electrical, HVAC, plumbing, masonry, roofing, and painting, as well as specialized services such as surveying, erosion control, and landscaping. Interested parties should contact the Estimating Department via email at cei-estimating@conewago.com to obtain bidding documents or ask questions.

Conewago Enterprises, Inc.

POSTED

about 11 hours ago

DEADLINE

ASO-1286-00 Site renovations at the Air Traffic Control Beacon Interrogator (ATCBI) tower at QRB, Samberg, TN

Solicitation # aso-1286-00-site-renovations-air-traffic-control-beacon-interrogator-atcbi-tower-qrb-samberg-tn

This solicitation, managed by PTSI Managed Services, Inc, covers comprehensive site renovations for the Air Traffic Control Beacon Interrogator tower located in Samberg, Tennessee. The scope of work includes upgrading interior and exterior lighting to LED fixtures, replacing the restroom exhaust fan and a 10x16 storage shed, and installing a new shelter roof. Additional structural improvements involve repairing the asphalt parking area, sealing foundation cracks, replacing awning penetrations, and performing necessary rust remediation on tower hardware. The project also requires the relocation of the entrance gate and the partial replacement of approximately 750 feet of barbed wire and fence fabric. This opportunity is set aside for Small Businesses and Small Disadvantaged Businesses under NAICS code 238210. Interested parties must submit their responses by September 25, 2026.

PTSI Managed Services, Inc

POSTED

about 11 hours ago

DEADLINE

AMC-0235 TBD VOR Public Announcement

Solicitation # amc-0235-tbd-vor-public-announcement

This solicitation, managed by PTSI Managed Services Inc. (Parsons), involves a comprehensive facility project in Louisiana focusing on electrical work, grounding system repairs, roofing installation, plumbing replacements, grading, painting, and door repairs. The estimated construction magnitude for these services is between 500,000 and 1,000,000 dollars. The opportunity is set aside for various small business categories, including Small Disadvantaged, Women-Owned, HUBZone, and Veteran-Owned small businesses. Interested parties must submit their responses by November 16, 2026, and can coordinate with the primary point of contact, Kurtis Kinard.

PTSI Managed Services Inc. (Parsons)

POSTED

about 11 hours ago

DEADLINE

IE JCC Fire Alarm Repairs

Solicitation # Inland Empire Fire Alarm Deficiencies (169706,169708,169733,169736 & 16937)

Management and Training Corporation (MTC), acting as the operator for the Inland Empire Job Corps Center, is soliciting subcontractor bids for a fixed-price, single lump sum contract to correct fire alarm deficiencies at the facility in San Bernardino, California. The scope of work includes the installation of SD500-PS and Notifier BNG-1 manual pull stations, the installation of Cooper Wheelock HSW and Model 757-3A-T horn/strobe notification appliances, and the replacement of six existing fire alarm bells with Cooper Wheelock HSW units. All new devices must be integrated into the existing system and undergo complete functional testing. The project is estimated between 0 and 25,000 dollars, with a performance period of 90 consecutive business days following the notice to proceed. Bids are due by September 16, 2026, and will be evaluated based on overall best value. This opportunity is set aside for various small business categories, including SDB, WOSB, HUBZone, and SDVOSB, under NAICS code 238210. The contract is subject to Construction Wage Rate Requirements, necessitating weekly certified payroll and adherence to California prevailing wage determinations. For bids of 25,000 dollars or more, a bid bond of 20 percent is required, along with performance and payment bonds from a surety company with at least an A- rating. Awardees must provide a Unique Entity ID (UEI) and complete the MTC Supplier Packet. Final acceptance is contingent upon a two-stage inspection process involving a substantial completion punch list and a final inspection approved by the center and government representatives.

Inland Empire Job Corps

POSTED

about 11 hours ago

DEADLINE

Special Areas Board - Request for Proposal - RE9254 - Contract Services for Supply Install GeneratorPanel at Consort Office

Solicitation # AB-2026-06240

The Special Areas Board is soliciting proposals for the supply and installation of a new main panel, generator, and transfer switch at the Consort SA#4 Office located in Consort, Alberta. This project, identified as solicitation AB-2026-06240, requires qualified contractors to provide the necessary equipment and installation services to ensure operational power reliability at the specified facility. Interested parties must submit their responses by the deadline of September 25, 2026, at 5:00 PM. The primary point of contact for this request is Heather Pedersen, the Requisition Clerk/HR Services for the Special Areas Board.

Special Areas Board

POSTED

about 12 hours ago

DEADLINE

Marine Electrical & High Voltage Services

Navsup Flt Logistics Ctr Yokosuka

POSTED

about 15 hours ago

DEADLINE

AV Installation and Systems Integration Contractor

US Embassy New Delhi

POSTED

about 15 hours ago

DEADLINE

Electrical and Data Outlet Modification Services

Fpac Bus Cntr-Acq Division

POSTED

about 15 hours ago

DEADLINE

More opportunities from Department Of Defense → Defense Logistics Agency

Same awarding agency

BATTERY, STORAGE

Solicitation # SPE7L7-26-Q-2418

This contract, identified as SPE7L7-26-Q-2418, is a firm fixed price solicitation by the Defense Logistics Agency for the procurement of sealed lead acid storage batteries (NSN 6140-01-624-9682). The requirement consists of two line items totaling eight units, with delivery expected 60 days after the order. This is a restricted source item requiring government engineering source approval, and it is designated as a critical application item. The batteries have a non-extendable shelf life of 12 months and must comply with specific hazardous material communication and packaging standards, including MIL-STD-2073-1E and MIL-STD-129. Quality assurance will be managed via zero-based sampling plans according to MIL-STD-1916 or ASQ H1331. Shipments are destined for locations in Oregon and Hawaii, with strict prohibitions against the intentional addition of mercury except where functionally required.

Battery Manufacturing

POSTED

about 10 hours ago

DEADLINE

BATTERY, STORAGE

Solicitation # SPE7L7-26-Q-2419

This contract is a solicitation for the procurement of five storage batteries, part number PS-12100 F1 from Power-Sonic Corporation, under NSN 6140-01-294-6528. The items are designated as critical application items and must feature F1 quick disconnect tabs. The contract is established as a firm fixed price agreement with a delivery requirement of 60 days after the order is placed. Each unit is destined for a specific naval vessel, including the USS Stout, USS Laboon, USS Barry, USS Russell, and USS John S McCain. The batteries are classified as Type I items with a non-extendable shelf life of 12 months. Strict adherence to hazardous materials packaging, marking, and shipping standards is required, specifically prohibiting the intentional addition of mercury except where functionally necessary. Quality assurance will be managed through zero-based sampling plans in accordance with MIL-STD-1916 or ASQ H1331. All packaging and marking must comply with MIL-STD-2073-1E and MIL-STD-129, with inspection and acceptance occurring at the point of origin.

Battery Manufacturing

POSTED

about 10 hours ago

DEADLINE

BATTERY ASSEMBLY

Solicitation # SPE7L7-26-Q-2417

This solicitation from the Defense Logistics Agency under the Department of Defense is for the procurement of two battery assemblies, identified by NSN 6140-01-664-6369. The contract requires delivery within 60 days after receipt of the order. Strict compliance is required regarding cybersecurity and export controls. The provider must be a CMMC Level 2 Certified Third-Party Assessment Organization and adhere to regulations concerning Covered Defense Information. Additionally, the technical data is subject to ITAR and EAR export controls, meaning access is limited to contractors with an approved US/Canada Joint Certification Program certification and completed DLA export-control training.

Battery Manufacturing

POSTED

about 10 hours ago

DEADLINE

LIMITER, RADIO FREQU

Solicitation # SPE4A7-26-Q-1069

The Defense Logistics Agency within the Department of Defense has issued solicitation SPE4A7-26-Q-1069 for the procurement of 49 radio frequency limiters. The items are identified by NSN/Part Number 1430-01-224-2273 and are associated with purchase request 7017409812. This federal solicitation was posted on September 11, 2026, with a response deadline of September 15, 2026. Interested parties should direct inquiries to the buyer via the DIBBS portal or the provided contact email.

Other Electronic Component Manufacturing

POSTED

about 10 hours ago

DEADLINE

COVERALLS, ANTI-EXPO

Solicitation # SPE1C1-26-Q-0498

The Defense Logistics Agency under the Department of Defense has issued solicitation SPE1C1-26-Q-0498 for the procurement of one unit of anti-exposure coveralls, identified by NSN/Part Number 8415-01-593-7934. This federal requirement is tracked under purchase request 7018286739. The solicitation was posted on September 11, 2026, with a response deadline of September 18, 2026. Interested parties should direct all inquiries to the buyer via the email address provided in the primary point of contact or through the DIBBS portal using the specific solicitation number.

Cut and Sew Apparel Manufacturing (except Contractors)

POSTED

about 10 hours ago

DEADLINE

GOVERNMENT FIT VERIFIC

Solicitation # SPE7L3-26-Q-1328

The Defense Logistics Agency within the Department of Defense has issued solicitation SPE7L3-26-Q-1328 for Government Fit Verific, identified by part number 0001S00000060. This federal procurement opportunity was posted on September 11, 2026, and requires a response by the deadline of September 28, 2026. The contract is managed under purchase request 7017604125, with specific quantity requirements detailed within the solicitation documents. Interested parties can access further details and submission guidelines through the DIBBS portal.

Testing Laboratories and Services

POSTED

about 10 hours ago

DEADLINE

POWER SUPPLY, UNINTERRU

Solicitation # SPE7L7-26-Q-2372

Solicitation SPE7L7-26-Q-2372 is a fixed-price request for quotations issued by the Defense Logistics Agency Land and Maritime for two uninterruptible power supplies, identified by NSN 6130-01-673-0176 and Motorola Solutions part number DSGXT4-1000RT120. The items are designated as critical application items with a 12-month extendable shelf life. Delivery is required within 60 days after order to the USS MARINETTE (LCS 25). Award will be based on the best value to the government, evaluating price, offered delivery, and past performance. The contract mandates strict adherence to military standards, including MIL-STD-2073-1E for packaging, MIL-STD-129 for marking, and RP001 for palletization. Because the items involve sealed lead acid batteries, the contractor must provide Material Safety Data Sheets per FED-STD-313 and comply with hazardous material shipping regulations under IP025. Quality assurance requires sampling according to MIL-STD-1916 or ASQ H1331, with a requirement for zero non-conformances in the sample lot. Additionally, the contractor must complete a CMMC Level 2 self-assessment and utilize the Wide Area WorkFlow system for all invoicing and receiving reports. Inspection and acceptance will occur at the point of origin.

All Other Miscellaneous Electrical Equipment and Component Manufacturing

POSTED

about 10 hours ago

DEADLINE

61--BATTERY,STORAGE

Solicitation # SPE7L7-26-T-5218

The Defense Logistics Agency, through DLA Land and Maritime, has issued solicitation SPE7L7-26-T-5218 as a Request for Quotations for three storage batteries, identified by NSN 6140017137559. This procurement is a total small business set-aside under NAICS 335910, with a response deadline of September 21, 2026. The required hardware must meet the specifications for East Penn Manufacturing Co. part number 18-G75-21EE IST6G08-NAV1 and is designated as a critical application item. The items have a non-extendable shelf life of 12 months and must be delivered to NAVSUP FLC Yokosuka in Japan within 20 days after receipt of order. The contract requires strict adherence to packaging and marking standards, including MIL-STD-2073-1E and MIL-STD-129, with specific labeling requirements for hazardous materials per the Hazard Communication Standard. Inspection and acceptance will occur at the destination. All quotes must be submitted electronically via the DIBBS system. The award process may utilize automated award and incorporates the HUBZone price evaluation preference. Compliance with various FAR and DFARS clauses is required, including those regarding cybersecurity safeguarding, the Berry Amendment, and the Buy American Act. Invoicing and payment must be processed through the Wide Area Workflow system.

Battery Manufacturing

POSTED

about 15 hours ago

DEADLINE

46--MODIFICATION KIT,WATER

Solicitation # SPE8E8-26-T-5568

Solicitation SPE8E8-26-T-5568 is a Request for Quotations issued by the Defense Logistics Agency Troop Support, Construction and Equipment office, for the procurement of two water treatment equipment modification kits under NSN 4610017148561. The requirement specifically references HDT Expeditionary Systems Inc part number T00012-5083-2. This is a total small business set-aside under NAICS 333310, with a response deadline of September 21, 2026. Delivery is required within 20 days after receipt of order, with the destination for inspection and acceptance located at Camp Pendleton, California. The procurement requires electronic submission of quotes via the DIBBS system. Contractors must adhere to strict packaging and marking standards, including ASTM D3951 and MIL-STD-129, and follow DLA packaging requirements RP001. Invoicing and payment must be processed through the Wide Area WorkFlow system. Key regulatory compliance includes the Buy American Act, the Berry Amendment, and DFARS cybersecurity requirements for safeguarding covered defense information. Notably, the use of additive manufacturing for the supplied parts is prohibited unless specifically authorized.

Commercial and Service Industry Machinery Manufacturing

POSTED

about 15 hours ago

DEADLINE

61--BATTERY,STORAGE

Solicitation # SPE7L7-26-Q-2412

The Defense Logistics Agency, through DLA Land and Maritime, has issued Request for Quotations SPE7L7-26-Q-2412 for the procurement of 100 nickel-cadmium wet storage batteries (NSN 6140-01-241-2296). These batteries are specified as wet, discharged, and spillable, with a non-extendable shelf life of 36 months. Approved sources include Aerodesign, Inc. (P/N AD-31004-04C) and Marathonnorco Aerospace, Inc. (P/N 31004-04C). The items are to be delivered to the Royal Saudi Air Force within 60 days after the order date. This is a fixed-price solicitation where award will be based on the best value to the government, evaluating technical conformity, past performance, and offered delivery time. Because the batteries are classified as corrosive materials (UN2795), the contractor must strictly adhere to hazardous materials regulations, including ICAO, IMDG, 49 CFR, and AFJMAN 24-204. Packaging must comply with MIL-STD-2073-1E Level B, Pack Code Q, using 4G fiber-board boxes. Inspection will be conducted by DCMA at the distributor or OEM site, with acceptance occurring at the origin. Administrative requirements include the use of the Wide Area WorkFlow system for electronic invoicing and receiving reports. The contract incorporates various FAR and DFARS clauses, including the Buy American and Balance of Payments Program and strict cybersecurity reporting requirements under DFARS 252.204-7012. Quotes must be submitted electronically by the deadline of September 17, 2026.

Battery Manufacturing

POSTED

about 15 hours ago

DEADLINE

53--ANODE,CORROSION PREVEN

Solicitation # SPE4A6-26-Q-1423

The Defense Logistics Agency is soliciting quotes for the procurement of six corrosion prevention anodes under National Stock Number 5342013978773. This requirement is identified by solicitation number SPE4A6-26-Q-1423 and is designated as a total small business set-aside under NAICS code 332994. The approved source for this item is 6RDX4 W3T106427. Items must be delivered to DLA Distribution San Joaquin within 190 days after the order is placed. Interested responsible sources must submit their electronic quotes by the deadline of September 21, 2026. The solicitation is available exclusively online via the DIBBS portal, as no hard copies or separate technical drawings are provided.

Small Arms, Ordnance, and Ordnance Accessories Manufacturing

POSTED

about 15 hours ago

DEADLINE

Supply of Fluid Pressure Regulating Valves (NSN 4820014623023)

Fluid Power Valve and Hose Fitting Manufacturing

POSTED

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 650+ contractors already using CLEATUS