Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

Electrical Strip Component Manufacturing

Active

Federal

Response Deadline08/19/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract requires the manufacture of 83 units of electrical strip components identified by NSN 5999-01-533-1001, all produced to meet strict military specifications. Every component must be properly packaged, preserved, marked, and barcoded in full compliance with Defense Logistics Agency standards to ensure traceability, durability, and readiness for military use. The work is scoped under a subcontract classification with a NAICS code of 335931, indicating it falls within the electrical equipment and component manufacturing sector. The solicitation was posted on August 4, 2026, with submissions due by August 19, 2026, and is managed by the Maritime Supply Chain under the Department of Defense. The place of performance and detailed point of contact information are not specified, but the contract is accessible through the DIBBS platform for further procedural details.

General Info

Manufacture 83 military-spec electrical strip components, compliant with DLA standards, under NAICS 335931.

Agency

Department Of Defense → MARITIME SUPPLY CHAINView Agency

NAICS

335931 - Current-Carrying Wiring Device ManufacturingView NAICS

Place of Performance

US

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedAug 4

subcontract

Response DeadlineAug 19

Submission deadline

Response Deadline

08/19/2026, 05:00:00 PM UTCin 14 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → MARITIME SUPPLY CHAIN

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → MARITIME SUPPLY CHAIN

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Manufacture of 83 units of electrical strip components (NSN 5999-01-533-1001) to military specifications, including packaging, preservation, marking, and barcoding per DLA standards.

Similar Contracts

Same NAICS industry code

Special-Purpose Electrical Cable Assembly ManufacturingA single custom electrical cable assembly, identified by NSN 6150-01-496-5544 and part number 93006A9001-1, is to be manufactured and delivered in accordance with military drawing specifications and applicable technical standards. The work falls under NAICS code 335931, classifying it as the manufacture of other electrical equipment and components, and is issued as a subcontract by the ASC Commodities Division under the Department of Defense. The solicitation was posted on August 5, 2026, with a firm response deadline of August 20, 2026, and the contract will be managed through the DIBBS platform. Performance location and point of contact details are not specified, and no set-aside classification applies to this requirement.

ASC COMMODITIES DIVISION

POSTED

about 8 hours ago

DEADLINE

RETAINER, ELECTRICAL

Solicitation # SPE7M5-26-Q-0839

The contract pertains to the procurement of 13 electrical retainers with NSN 5935-01-466-5336 under solicitation SPE7M5-26-Q-0839, issued by the Defense Logistics Agency’s Active Devices Division. The delivery is required within 134 days after award, and responses must be submitted by August 19, 2026. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date for simplified acquisitions or the RFP issue date for large acquisitions, unless amended. Specific requirements include the removal of government identification from non-accepted supplies, physical marking of bare items, and strict adherence to export control regulations under ITAR or EAR, which restrict the disclosure of technical data to foreign persons, regardless of location, and impose obligations on both U.S. and foreign-owned entities. Access to controlled technical data is restricted to contractors authorized by DLA who hold a valid US/Canada Joint Certification Program certification, have completed mandatory training on handling DOD export-controlled data, and have passed the DLA Export-Controlled Technical Data Questionnaire. The place of performance is designated as Anniston, Alabama, with Andrew Bracken listed as the primary point of contact.

ACTIVE DEVICES DIVISION

POSTED

about 8 hours ago

DEADLINE

CABLE ASSEMBLY, SPEC

Solicitation # SPE4A6-26-Q-1282

The contract is for a specialized electrical cable assembly identified by NSN 6150-01-326-0282, with a requirement for ten units to be delivered within 324 days of award. Technical and quality obligations are governed by the DLA Master List of Technical and Quality Requirements, with applicable revisions determined by the acquisition type and timing of solicitation amendments. Cybersecurity compliance mandates CMMC Level 2 certification through a certified third-party assessment organization, and packaging must adhere to DLA-specific standards. The item includes controlled technical data subject to ITAR or EAR regulations, restricting disclosure to foreign persons regardless of location and requiring compliance with DFARS 252.225-7048. Access to this data is limited to contractors with approved US/Canada Joint Certification Program status, verified completion of DOD export control training, and formal DLA authorization. Inspection and acceptance occur at origin, non-accepted items must have government identification removed, and physical marking of bare items is required. The solicitation, issued under SPE4A6-26-Q-1282, was posted on August 5, 2026, with responses due by August 20, 2026, and is managed by the Department of Defense’s ASC Commodities Division, with Marcita Robinson as the primary point of contact.

ASC COMMODITIES DIVISION

POSTED

about 8 hours ago

DEADLINE

CABLE ASSEMBLY, POWE

Solicitation # SPE4A6-26-T-12UK

The contract is for the procurement of eight cable assemblies, power, electrical, identified by NSN 5995-01-702-3934, under solicitation SPE4A6-26-T-12UK, issued by the Defense Logistics Agency’s ASC Commodities Division. Delivery is required within 170 days of award, and the solicitation opened on August 5, 2026, with a response deadline of August 13, 2026. The item is subject to stringent technical and quality requirements incorporated from the DLA Master List of Technical and Quality Requirements, including physical identification and bare item marking, packaging standards per DLA guidelines, and rules for removing government identification from non-accepted supplies. Inspection and acceptance must occur at the manufacturer’s origin, and sampling must follow MIL-STD-1916 or ASQ H1331 with zero non-conformances tolerated unless otherwise specified, with critical, major, and minor attributes assigned specific verification levels or AQLs. The technical data associated with this item is subject to export controls under ITAR or EAR, restricting access to authorized parties only—contractors must hold valid US/Canada Joint Certification Program certification, complete mandatory DOD export control training, and obtain DLA approval to handle the data. The place of performance is New Cumberland, Pennsylvania, and all technical and compliance obligations are enforced under applicable DFARS provisions including 252.225-7048.

ASC COMMODITIES DIVISION

POSTED

about 8 hours ago

DEADLINE

CABLE ASSEMBLY, SPEC

Solicitation # SPE4A6-26-T-12SN

The contract is for a cable assembly identified by NSN 5995-01-660-3439 and part number WHS-01554, with a quantity of three units, to be delivered under solicitation SPE4A6-26-T-12SN. Delivery is required within 170 days from the award date, with a firm delivery date of January 31, 2027, and an original required delivery date of March 30, 2027. The items must be delivered FOB origin, with no tolerance for quantity variance, and inspected and accepted at the destination. Packaging must comply with MIL-STD-2073-1E and DLA packaging requirements, including marking per MIL-STD-129 with no special marking codes, and palletization as specified. The material has no shelf life restriction but is designated as a critical application item and subject to cybersecurity maturity model certification (CMMC) Level 2 self-assessment requirements. The supplier must adhere to stringent quality assurance protocols, including zero-defect sampling under MIL-STD-1916 or comparable zero-based plans unless otherwise directed, with attributes classified as critical, major, or minor and assigned corresponding verification levels or AQLs. Technical and quality requirements referenced in this contract are sourced from the DLA Master List of Technical and Quality Requirements, with applicable revisions controlled by the solicitation or award date depending on acquisition size. Documentation for source approval is required, and government identification must be removed from non-accepted supplies. The cable assembly is procured under the DoD authorized unit of issue, with pricing and logistics details aligned to the provided purchase request and delivery address at the DLA Distribution facility in New Cumberland, Pennsylvania. Transportation is governed by specific DLA procedural notes, and all work must be performed by a certified supplier, Crystal Group, Inc., with full compliance expected across cybersecurity, packaging, marking, and inspection standards. The solicitation was posted on August 5, 2026, with responses due by August 13, 2026, under a federal acquisition framework with NAICS code 335931.

ASC COMMODITIES DIVISION

POSTED

about 8 hours ago

DEADLINE

Solicitation # SPE7M2-26-Q-0722

This contract specifies the procurement of terminal lugs identified by NSN 5940-01-054-6295 and part number MS21004-4, with a total quantity of 684 packing groups, each equivalent to 100 units, for a total of 68,400 individual terminals. The item is designated as a commercial item and is subject to qualification through the Qualified Products List or Qualified Manufacturers List. Technical compliance is governed by SAE AS21004F Revision F dated 12/01/2023 and SAE AS7928 Revision C dated 05/01/2019, with configuration changes requiring formal Engineering Change Proposal requests. The product must be free from intentional addition of mercury or mercury-containing compounds, with limited exceptions for specific functional uses in batteries, lighting, instruments, weapon systems, or chemical reagents, and all exempt items must meet stringent containment and shock-proofing standards per NAVSEA 5100-003D. Delivery is set for 167 days after contract award, with FOB origin and inspection and acceptance points at destination. Pricing is firm fixed, with zero tolerance for quantity variance. Packaging must adhere strictly to MIL-STD-2073-1E and DLA packaging requirements, including use of approved materials, methods, and marking in accordance with MIL-STD-129 and ISO/IEC 16388 barcoding standards. The item is classified as critical application and subject to covered defense information protocols. The contract specifies the DLA distribution facility in New Cumberland, Pennsylvania, as the delivery point and includes detailed transportation protocols under DLAD Proc Notes C19 and C20. The solicitation, issued by the Department of Defense’s Nuclear Reactor Program, was posted on August 5, 2026, with responses due by August 12, 2026, and the material is required for delivery no later than April 6, 2027.

NUCLEAR REACTOR PROGRAM

POSTED

about 8 hours ago

DEADLINE

FUSE, CARTRIDGE

Solicitation # SPE7M5-26-T-368G

The contract is for the procurement of five cartridge fuses with NSN 5920-01-646-3582 under solicitation SPE7M5-26-T-368G, issued by the Department of Defense’s Active Devices Division. Delivery is required within 20 days after contract award, and responses must be submitted by August 17, 2026. The solicitation is subject to the DLA Packaging Requirements and incorporates all technical and quality specifications listed in the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date for simplified acquisitions. The alternate offeror must provide a complete data package including detailed information for both the approved and alternate parts. The place of performance is listed as FPO with zip code 96694, and the primary point of contact is Matthew Stanko, reachable via email and phone provided. The NAICS code 335931 indicates classification under Electrical Equipment and Component Manufacturing, and no set-aside type is specified. All government identification must be removed from non-accepted supplies per applicable regulations.

ACTIVE DEVICES DIVISION

POSTED

about 8 hours ago

DEADLINE

BATTERY POWER SUPPLY

Solicitation # SPE7LX-26-U-9315

The contract is for the procurement of a Battery Power Supply, identified by NSN 6130016095744 and part number OFM-2060-A1 manufactured by Intelligent Manufacturing Solutions, 6FQM4. This is a commercial item classified as a critical application item under an Indefinite Delivery Contract (IDC) below the Simplified Acquisition Threshold, with a one-year performance period. The estimated annual quantity is 40 units, but the government is not obligated to purchase the full amount; a guaranteed minimum of six units applies once the contract becomes binding. Delivery must be made FOB origin within 127 days of order receipt, with inspection and acceptance occurring at the destination. The item must comply with MIL-STD-2073-1E packaging standards and MIL-STD-129 marking requirements, with special marking code 00 indicating no special marking is required, and palletization must adhere to DLA’s RP001 packaging requirements. Sampling and acceptance are governed by MIL-STD-1916 or ASQ H1331 Table 1 using a zero-defects approach; critical, major, and minor attributes must meet verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively, with unspecified attributes treated as major. The solicitation is restricted to small businesses and prohibits the submission of used, reconditioned, remanufactured, or former government surplus items. Quotes must remain valid for a minimum of 90 days. The contractor must comply with a comprehensive set of clauses including safeguarding covered defense information, cyber incident reporting, prohibition of hexavalent chromium, restrictions on covered telecommunications equipment, NIST SP 800-171 assessment requirements, and Buy American and Berry Amendment mandates with a reduced threshold of $150,000. Payment must be processed electronically through the Wide Area Workflow system, and all hazardous materials must be identified with accompanying Safety Data Sheets meeting 29 CFR 1910.1200 requirements. The contractor is required to maintain current representations in the System for Award Management and must not provide covered telecommunications equipment. All quotations must be submitted by August 20, 2026, via the DIBBS portal, with the primary point of contact being Theodore Misiolek of the DLA Land and Maritime Strategic Acq Program Directorate in

STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

about 8 hours ago

DEADLINE

CABLE ASSEMBLY, SPECIAL

Solicitation # SPE4A6-26-Q-1281

This contract is for a single unit of a special-purpose electrical cable assembly identified by NSN 6150-01-496-5544, with a delivery deadline of 220 days after contract award. The technical and quality requirements governing this item are defined by the DLA Master List of Technical and Quality Requirements, with the applicable revision controlled by the solicitation issue date for simplified acquisitions or the RFP issue date for large acquisitions, unless an amendment supersedes it. The assembly must comply with DLA packaging standards, require removal of government identification from non-accepted supplies, and be physically marked per specified identification protocols. Components within the assembly must be sourced from qualified manufacturers listed on approved Qualified Products Lists or Qualified Manufacturers Lists, and procurement must adhere to the referenced procurement note H02. Sampling and inspection must follow MIL-STD-1916 or ASQ H1331, Table 1, or an equivalent zero-based plan, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0, respectively. Zero non-conformances are required unless otherwise stated, and manufacturers may choose either attribute or variable inspection methods under MIL-STD-1916. Technical data associated with this item is subject to export controls under ITAR or EAR, restricting disclosure to foreign persons regardless of location, and DFARS 252.225-7048 is applicable. Access to this controlled data is limited to contractors with approved US/Canada Joint Certification Program certification, completion of required DOD export control training, and prior authorization from DLA. The solicitation was issued on August 5, 2026, with responses due by August 20, 2026, under solicitation number SPE4A6-26-Q-1281, managed by the Department of Defense’s ASC Commodities Division, and point of contact is Marcita Robinson.

ASC COMMODITIES DIVISION

POSTED

about 8 hours ago

DEADLINE

Solicitation # SPRMM126QKG70

This contract pertains to the procurement of a HEX RECT ASSY under emergency acquisition authority, with all contractual documents considered issued upon electronic transmission or mail delivery. The item must be manufactured to exact specifications defined by MIL-STD-130 for marking and MIL-I-45208 for quality inspection, with ISO 9001 certification accepted as an alternative. The contractor must be the original equipment manufacturer or an authorized distributor, with clear identification of the OEM via CAGE code and part number; refurbished materials are strictly prohibited. All items must be mercury-free and free from contamination, with any intentional use of mercury requiring prior written approval and a warning plate. Inspection is required at the source, and the supplier must maintain a government-acceptable quality system, with records retained for four years post-delivery. Packaging must comply with MIL-STD-2073, and no changes to design, material, or production site are permitted without formal written approval and a $250 administrative cost reduction. The contract mandates use of WAWF for invoice and receiving report submission, and compliance with CMMC Level 1 cybersecurity self-assessment. Award will be granted based on the Lowest Price Technically Acceptable method, with all proposals subject to strict technical compliance. The contractor must provide an email for communication and is strongly encouraged to register for EDA via PIEE to receive automated notifications of contract actions. The solicitation prohibits distribution of Navy-provided documents without proper Distribution Statement compliance, with specific controls for NoFORN and Export Controlled data. Small business representation is required under NAICS code 335931, and additional deviations apply for annual certifications and cybersecurity. Deliveries must align with specified timelines, and failure to disclose exceptions in EDI submissions will result in award based solely on solicitation terms. Any post-award changes will incur cost deductions. The procurement is managed by DLA Mechanicsburg, and all vendor interactions must conform to the detailed quality, traceability, and security protocols outlined throughout the contract.

SPRMM1 DLA Mechanicsburg

POSTED

about 13 hours ago

DEADLINE

Solicitation # N0010426QEC99

The contract pertains to the procurement of a cable assembly under solicitation N0010426QEC99, issued by NAVSUP Weapon Systems Support Mech, with a response deadline of September 4, 2026. It invokes a comprehensive set of technical, quality, and administrative requirements, including mandatory compliance with the Individual Repair Part Ordering Data (IRPOD) available on the BPMI site, which serves as the primary reference for technical specifications, drawings, and standards. The contract enforces strict order of precedence for document conflicts, with amendments and the schedule taking priority over specifications and referenced standards. Contractors must adhere to the exact revision levels of cited documents unless written approval is obtained for deviations, and any non-conformance must be declared in advance with technical justification and supporting data. Packaging must meet MIL-PRF-23199 and MIL-STD-2073 standards, with cleanliness controls applied per MIL-STD-767 and MIL-STD-2041, though fire retardant materials are no longer required. The use of mercury or mercury compounds is strictly prohibited. Quality assurance is governed by the IRPOD, requiring contractors to maintain inspection records accessible to the government throughout and after performance. All contractual documents are considered issued upon electronic transmission, and pricing is valid for 60 days post-closing unless otherwise stated. The contract mandates use of Wide Area Workflow for invoice and receiving report submissions and requires compliance with cybersecurity maturity certification, veteran and disability equal opportunity provisions, small business representations, and security prohibitions. Data deliverables must follow DD Form 1423 formats with specified distribution statements, submission frequencies, and approval codes, and a Certificate of Compliance per DI-MISC-81356 must be submitted with each delivery. The NAICS code 335931 classifies this procurement under other electrical equipment and component manufacturing, and the point of contact is designated for technical inquiries.

Navsup Weapon Systems Support Mech

POSTED

about 13 hours ago

DEADLINE

Procurement of CABLE ASSEMBLY, POWER, ELECTRICAL

Solicitation # W8486-270955/A

The Department of National Defence is seeking proposals for 400 power electrical cable assemblies, identified by GSIN 6150 and NSN 6150-01-022-6004, with part number 11682336-1 or an acceptable equivalent, manufactured by NCAGE 19207. Each of the 200 units is to be delivered to either 25 CFSD Montreal at 6363 Rue Notre Dame St E, Montreal, QC H1N 2E9, or 7 CFSD Edmonton at 195 Ave & 82nd St, Building 236, Edmonton, Alberta T5J 4J5. Offerors must explicitly provide the part number and manufacturer NCAGE, and if proposing an equivalent or substitute product, must specify the brand name, model, part number, and NCAGE of the alternative. This procurement is conditionally reserved for Aboriginal businesses under the federal government’s Procurement Strategy for Aboriginal Business, and interested parties must comply with the requirements outlined in Annex 9.4 of the PWGSC Supply Manual. The solicitation, numbered W8486-270955/A, was posted on August 5, 2026, with a response deadline of September 3, 2026, and all submissions must be received by 8:00 PM Eastern Time. The Crown reserves the right to negotiate with any supplier, and documents may be submitted in either English or French. Primary contact for inquiries is Emma Wood, Contracting Authority, reachable via email at emma.wood@forces.gc.ca or phone at 343-616-1706.

Department of National Defence

POSTED

about 20 hours ago

DEADLINE

More opportunities from Department Of Defense → MARITIME SUPPLY CHAIN

Same awarding agency

Government-Arranged Transportation (First Destination Transportation - FDT)The contractor is tasked with preparing and packaging an impeller for government-arranged sea transport under the Department of Defense’s First Destination Transportation program, ensuring full compliance with military logistics standards. This work requires precise handling and packaging procedures tailored to secure military transport requirements, with the impeller destined for delivery via sea under the supervision of the Maritime Supply Chain branch. The contract is structured as a subcontract under the NAICS code 488999, indicating it pertains to other support activities for transportation, and all activities must align with the stringent protocols enforced by the Department of Defense for defense-related cargo. The solicitation was posted on August 5, 2026, and responses are due by August 12, 2026, with no specific set-aside classification indicated. Although no organizational address or point of contact details are provided, the work must be performed in accordance with the specifications outlined by the DLA’s FDT program, and the contract is accessible via the DIBBS platform. The contractor must ensure all packaging, labeling, documentation, and readiness for sea transport meet the operational and security demands of military logistics, with no flexibility in adherence to established standards.

All Other Support Activities for Transportation

POSTED

about 8 hours ago

DEADLINE

Domestic Supply Chain Compliance and ReportingAll materials used in production must be sourced exclusively from U.S. or designated foreign countries to ensure compliance with FAR and DFARS regulations, with full documentation maintained to verify origin and traceability throughout the supply chain. The subcontract requires strict adherence to domestic sourcing requirements and demands rigorous recordkeeping to demonstrate adherence to federal procurement standards. This contract is issued by the Department of Defense through the Maritime Supply Chain office and is open for response until August 12, 2026, with materials classified under NAICS code 423840 related to wholesale trade of miscellaneous durable goods. Failure to provide accurate documentation or source non-compliant materials will result in nonconformance and potential contract termination.

Industrial Supplies Merchant Wholesalers

POSTED

about 8 hours ago

DEADLINE

Precision Machining of Centrifugal Pump ImpellerThe contract calls for the manufacture of two precision centrifugal pump impellers designed for critical applications requiring strict compliance with military or industrial specifications. This subcontract is part of the Department of Defense’s Maritime Supply Chain initiative and is classified under NAICS code 332112, indicating it falls within the precision machining and manufacturing sector for pumps and pumping equipment. The impellers must meet exacting quality and performance standards to ensure reliable operation in demanding environments, where failure is not an option. All work must be completed to stringent technical requirements without deviation, emphasizing dimensional accuracy, material integrity, and surface finish. The solicitation was posted on August 5, 2026, with a firm deadline for responses on August 12, 2026, leaving a limited window for qualified subcontractors to submit proposals. The place of performance and point of contact details are not specified, suggesting the contractor may have flexibility in location but must still meet all delivery and certification benchmarks. The contract is accessible through the DIBBS platform, and interested parties must ensure full alignment with the technical and compliance demands outlined in the full RFQ to be considered for award. There is no set-aside designation, meaning any eligible supplier may bid regardless of business size or ownership characteristics.

Nonferrous Forging

POSTED

about 8 hours ago

DEADLINE

Data retrieval failure — no sub-opportunities identifiableData retrieval for the prime contract has failed, preventing identification of any subcontract opportunities linked to this solicitation. The posting date is August 5, 2026, with a response deadline of August 17, 2026, and the opportunity is categorized as a subcontract under the Maritime Supply Chain agency within the Department of Defense. The place of performance is listed as Robins AFB with a zip code of 31098-1887, though no city, state, or country details are provided for the office address or point of contact. No solicitation number, NAICS code, set-aside type, or organization type is available, and the official link to the solicitation is accessible via the DIBBS platform.

POSTED

about 8 hours ago

DEADLINE

CIRCUIT CARD ASSEMB

Solicitation # SPE7M1-26-T-250H

The contract pertains to the procurement of 30 circuit card assemblies identified by NSN 5998-00-111-4498 and part number 65901-02973-044, with a unit price of $30.00 and a total value of $900.00. Delivery is required within 20 days under FOB origin terms, with no variance allowed in quantity, and acceptance occurs at the origin point. The items must be packaged in compliance with MIL-STD-2073-1E, marked according to MIL-STD-129, and contain no special marking codes. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced by R and I numbers, and cybersecurity compliance is mandated at CMMC Level 2 via self-assessment, with Covered Defense Information rules applied. The goods are destined for the Government of Israel, Ministry of Defense, with a specified freight forwarder and government use identifiers included. The solicitation number is SPE7M1-26-T-250H, issued by the Department of Defense’s Maritime Supply Chain, with a response deadline of August 17, 2026, and a required delivery date of August 7, 2026. The contract falls under NAICS code 334418 and is administered through DLA’s eProcurement system, with all unit of issue conversions defined by official DoD standards.

Printed Circuit Assembly (Electronic Assembly) Manufacturing

POSTED

about 8 hours ago

DEADLINE

ALARM, GAS, AUTOMATIC

Solicitation # SPE7M1-26-T-250L

The contract pertains to the procurement of 307 units of an automatic gas alarm with NSN 6665-01-499-7234 under solicitation SPE7M1-26-T-250L, issued by the Department of Defense’s Maritime Supply Chain division. The solicitation is a total small business set-aside, with responses due by August 17, 2026, and requires delivery within 13 days after award. All supplies must comply with DLA packaging requirements and technical quality standards referenced in the DLA Master List of Technical and Quality Requirements, where revisions in effect at the time of solicitation issue or award govern compliance. Mercury or mercury-containing compounds are strictly prohibited from intentional addition or direct contact with the supplied hardware except under specific exemptions for functional uses such as batteries, fluorescent lights, weapons systems, or authorized instruments, with portable devices containing mercury required to be shockproof and feature a secondary containment boundary in accordance with NAVSEA 5100-003D. The offeror must submit a complete data package covering both the approved and alternate parts, as no existing data is available. The place of performance is Tracy, California, 95304-5000, and the primary point of contact is Misty Slone, reachable via email and phone provided.

Other Measuring and Controlling Device Manufacturing

POSTED

about 8 hours ago

DEADLINE

SEAL ASSEMBLY, SHAFT, SP

Solicitation # SPE7M1-26-Q-1335

The seal assembly is a shaft-mounted, spring-loaded mechanical seal requiring pure carbon material proprietary to Morgan Advanced Materials, specifically Cage 80894, as defined by Drawing 5773203, Sheet 26. Manufacturing must comply with NAVSEA 5773203, Piece No. 10A, and Drawing Sheets 26 and 30, with three critical deviations: the outer shell must follow Ram Seal Drawing 01-250159 Rev B, the drive band must adhere to Ram Seal Drawing 11-250159 Rev B, and the spring retainer must conform to Ram Seal Drawing 12-250259 Rev A. Each unit must be delivered with a complete installation kit containing specified O-rings identified by part numbers 5773203-1.6, 5773203-1.7.1, 5773203-12.6.4, 5773203-1.8.1, 5773203-1.9.1, 5773203-4.1, 5773203-10.11, 5773203-12.6.5, and a 2-inch steel spanner wrench with a .250 inch pin per Fed Spec GGG-W-665 Type 2 Grade A. The contract mandates a Certificate of Quality Compliance for each manufacturing lot, prepared in accordance with the Supplemental Quality Assurance Provision, and requires electronic submission of each COQC via the iRAPT system. Product verification testing may be invoked at the government’s discretion under DLAD 52.246-9004, and all supplies must conform to DLA packaging, configuration management, and inspection requirements including RQ002, RQ009, and RD003. The NSN 4320-01-269-8849 is solicited under a total small business set-aside with a delivery deadline of 30 days ADO for 104 units, sourced through the Department of Defense’s Maritime Supply Chain under contract SPE7M1-26-Q-1335.

Air and Gas Compressor Manufacturing

POSTED

about 8 hours ago

DEADLINE

MODIFICATION KIT, EL

Solicitation # SPE7M1-26-T-250F

This contract specifies the procurement of a Modification Kit, EL, with NSN 6105-01-705-8310 and part number 377-53322-000, supplied by JOHNSON CONTROLS NAVY SYSTEMS, LLC. The delivery is for one unit, to be shipped FOB destination within 20 days of contract award, with no quantity variance allowed. All packaging and preservation must strictly comply with MIL-STD-2073-1E, Appendix D, for kits, and marking must adhere to MIL-STD-129. Packaging requirements as defined by DLA’s RP001 apply, including palletization and the use of specified preservation methods, wrapping, and cushioning materials. The item is designated as a Critical Application Item and may involve Covered Defense Information under RD003. Technical and quality requirements referenced via R or I numbers are governed by the DLA Master List of Technical and Quality Requirements, with the revision in effect on the solicitation issue date controlling. The delivery destination is the USS CANBERRA LCS 30 at FPO AP 96694, and shipment logistics must follow DLAD Proc Note C19 for transportation and C20 for first destination delivery. The contract solicitation number is SPE7M1-26-T-250F, with a required delivery date of August 3, 2026, and procurement is managed under NAICS code 333618 by the Department of Defense’s Maritime Supply Chain.

Other Engine Equipment Manufacturing

POSTED

about 8 hours ago

DEADLINE

INDICATOR, CARBON MONOX

Solicitation # SPE7M1-26-T-250G

This contract specifies the procurement of a carbon monoxide indicator unit with part number BWC2-M25100 and NSN 6665200018480, with a quantity of five units to be delivered within 20 days to the USS ROBERT SMALLS CG 62. Delivery is FOB destination with zero variance allowed and inspection and acceptance occurring upon arrival. Packaging must comply with MIL-STD-2073-1E and MIL-STD-129, including specific storage and handling requirements such as dry climate control and prohibition of cushioning materials. All hazardous materials, including lithium batteries, must adhere to DLA packaging and shipping standards, with marking and documentation following strict DoD guidelines. The item is classified as a critical application product with a TYPE 2 shelf life of 12 months extendable, and no mercury or mercury-containing compounds may be intentionally added or come into direct contact with the supplied hardware except under approved exceptions for functional components like certain instruments or sensors as defined by NAVSEA. Suppliers are required to submit Safety Data Sheets (SDS) and Hazard Communication Standard (HCS) compliant labels in accordance with 29 C.F.R. 1910.1200, effective since June 1, 2015, replacing the previous Material Safety Data Sheet (MSDS) requirements. Employees must be trained on these updated standards, including proper classification, labeling, and handling procedures. The contract incorporates technical and quality requirements from the DLA Master List, and the unit of issue is defined by DoD standards. The solicitation number is SPE7M1-26-T-250G, with a required delivery date of August 3, 2026, and responses due by August 17, 2026. Transportation and shipment instructions reference DLA procedural notes C19 and C20, and the item is subject to federal acquisition regulations under the North American Industry Classification System code 334511.

Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument Manufacturing

POSTED

about 8 hours ago

DEADLINE

ALARM, GAS, AUTOMATIC

Solicitation # SPE7M1-26-T-250J

The contract is for the procurement of 185 units of an automatic gas alarm identified by NSN 6665-01-499-7234 under purchase request 7015538145, with a delivery requirement of 13 days after order placement. The solicitation number is SPE7M1-26-T-250J, issued by the Department of Defense’s Maritime Supply Chain through the Defense Logistics Agency, with a response deadline of August 17, 2026. The technical requirements referenced in this contract are governed by the DLA Master List of Technical and Quality Requirements, with revision control depending on the type of acquisition—simplified acquisitions follow the revision in effect on the solicitation issue or award date, while large acquisitions adhere to the revision in effect on the RFP issue date unless an amendment supersedes it. The contract explicitly prohibits the intentional addition of mercury or mercury-containing compounds to any supplied hardware or equipment, unless exempted for specific functional applications such as batteries, fluorescent lamps, instruments, sensors, weapon systems, or NAVSEA-specified chemical reagents. Portable fluorescent lamps and instruments containing mercury must be shockproof and include a secondary containment barrier in accordance with NAVSEA 5100-003D. Offerors must provide a complete data package covering both the approved and alternate parts, as no existing data is available for this item. The place of performance is Tracy, California, with Misty Slone listed as the primary point of contact.

Other Measuring and Controlling Device Manufacturing

POSTED

about 8 hours ago

DEADLINE

CONNECTOR, RECEPTACL

Solicitation # SPE7M1-26-U-5053

The contract solicitation SPE7M1-26-U-5053 seeks the procurement of an electrical connector, receptacle, identified by NSN 5935015240367 and part number 2583A-125, under an indefinite-delivery contract structure with an estimated annual quantity of 11 units and a maximum contract value of $350,000. Deliveries are required FOB Origin with a 57-day lead time following award, and goods will be inspected and accepted at the destination point. All supplies must comply with stringent DLA packaging and quality requirements, including adherence to MIL-STD-129 for labeling and marking, RP001 for palletization, and RA001 for technical specifications from the DLA Master List of Technical and Quality Requirements, which supersede commercial standards such as ASTM D3951. Hazardous materials, as defined by FED-STD-313, must be packaged under TQ requirement IP025 and labeled per OSHA’s Hazard Communication Standard, while non-hazardous items must meet commercial packaging standards unless overridden by DLA requirements. Physical identification of bare items is mandated under RQ017. The contract includes mandatory clauses related to employment equity, anti-trafficking, sustainable products, cybersecurity safeguards including NIST SP 800-171 and DFARS 252.204-7012, and prohibitions on covered defense telecommunications equipment. Payment will be processed exclusively via Wide Area WorkFlow using the Invoice and Receiving Report method, and all offers must be submitted electronically through the DIBBS portal by the August 20, 2026 deadline. The solicitation requires full compliance with Buy American provisions and mandates U.S.-flag vessels for ocean transportation unless waived. No unit price is listed in the CLIN, but the total estimated value is capped at $350,000, with award based on price and other factors, not as a strictly lowest price technically acceptable procurement. The contract is unilateral, allowing the Government to issue delivery orders under predetermined terms, and includes guaranteed minimum quantities. All representations and certifications by offerors remain unpopulated at the solicitation stage.

Electronic Connector Manufacturing

POSTED

about 8 hours ago

DEADLINE

HOUSING SECTION, LIQ

Solicitation # SPE7M1-26-T-250A

This contract pertains to the procurement of a housing section and pump under solicitation SPE7M1-26-T-250A, with a single unit of 1 EA identified by NSN 4320-01-511-0467 and part number 009-1107B08-347552A from Carver Pump Company. Delivery is required within 20 days FOB destination, with no variance allowed in quantity and inspection and acceptance occurring at the delivery point. All items must comply with DLA packaging requirements per MIL-STD-2073-1E and MIL-STD-129, including specific preservation methods, wrapping, and palletization standards. Mercury and mercury-containing compounds are strictly prohibited in or on the supplied hardware except for designated functional uses such as certain batteries, lighting, instruments, sensors, controls, weapon systems, and NAVSEA-specified reagents, with additional containment and shockproofing mandates for portable devices. Packaging must adhere to RP001 and special marking code 00-00 applies, with no unique identifiers beyond standard requirements. Shipment must be delivered to the FPO address for USS JOHN P MURTHA LPD 26 using the fastest traceable means, explicitly prohibiting parcel post, and must follow DLA procurement notes C19 and C20 for transportation routing. The supply is tied to Project LK5 TP 2 with a required delivery date of August 3, 2026, and is subject to federal procurement standards incorporating technical and quality requirements referenced from the DLA Master List. The contracting office is under the Department of Defense’s Maritime Supply Chain, with Michael Reese as the primary point of contact.

Fluid Power Pump and Motor Manufacturing

POSTED

about 8 hours ago

DEADLINE