Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

Electrical Testing and Systems Verification

Active

Federal

Response Deadline08/11/2026, 07:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract requires comprehensive electrical testing and systems verification for newly installed cabling and medical monitors, with a focus on ensuring electrical continuity, proper grounding, and full functionality to meet safety and regulatory standards. This work is critical to maintaining the integrity of medical equipment in a healthcare environment, where operational reliability and patient safety are paramount. All testing must be conducted in accordance with industry best practices and applicable codes to confirm that systems operate as intended without risk of electrical hazard or performance failure. The contract is classified as a subcontract under NAICS code 541340 and is managed by the Department of Veterans Affairs through the 250-NETWORK Contract Office 10 (36C250). Performance is required in Detroit, Michigan, with a zip code of 48201. The solicitation was posted on August 5, 2026, and responses must be submitted by August 11, 2026, at 7:00 PM Eastern Time. There is no set-asides designation listed, and the contract does not specify a point of contact. Interested parties must respond through the provided SAM.gov link before the deadline to be considered.

General Info

Electrical testing for medical systems in Detroit, VA subcontract, proposals due August 11, 2026.

Agency

Department Of Veterans Affairs → 250-NETWORK Contract Office 10 (36C250)View Agency

NAICS

541340 - Drafting ServicesView NAICS

Place of Performance

Detroit, MI, 48201, USA

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedAug 5

subcontract

Response DeadlineAug 11

Submission deadline

Response Deadline

08/11/2026, 07:00:00 PM UTCin 5 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Veterans Affairs → 250-NETWORK Contract Office 10 (36C250)

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Veterans Affairs → 250-NETWORK Contract Office 10 (36C250)

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Electrical continuity, grounding, and functionality testing of newly installed cabling and medical monitors to ensure safety and compliance.

Similar Contracts

Same NAICS industry code

BIM and Digital Modeling ServicesThe contract seeks qualified vendors to provide Building Information Modeling and digital modeling services focused on the development and ongoing maintenance of Revit-based BIM deliverables for the Federal Deposit Insurance Corporation. Work requires strict adherence to model accuracy standards, proactive identification and resolution of design clashes, and seamless collaboration with multidisciplinary design teams to ensure alignment with project objectives. Deliverables must support efficient project workflows and meet industry best practices for BIM execution in a federal construction environment. Performance is to be conducted primarily in Arlington, Virginia, with a response deadline of August 25, 2026, and the solicitation was posted on August 5, 2026. This is a subcontract opportunity classified under NAICS code 541340 for architectural and engineering services. The contracting agency is the Federal Deposit Insurance Corporation, with no set-aside provisions specified. All submissions must be submitted through the designated SAM.gov portal before the stated deadline to be considered.

POSTED

DEADLINE

Structural Design for Park StructuresThe County of Guilford in North Carolina has issued a subcontract solicitation for the structural engineering design of waterfront infrastructure including shelters, fishing piers, kayak launch platforms, and other load-bearing structures. The work falls under NAICS code 541340, which pertains to architectural, engineering, and related services, and is targeted toward qualified engineering firms capable of delivering technically sound, code-compliant designs for maritime recreational facilities. The solicitation was posted on August 5, 2026, with a firm deadline for responses set for August 28, 2026, at 7:00 PM Eastern Time. All design deliverables must meet applicable safety, durability, and environmental standards for coastal and waterfront applications, and the performance location spans within Guilford County’s public park systems. There is no set-aside classification specified, allowing any eligible subcontractor to submit a proposal, and the primary point of contact details are not provided in the solicitation data. Further information and submission instructions can be accessed via the official solicitation link.

County of Guilford

POSTED

DEADLINE

Structural Engineering Services

Flood Control District

POSTED

DEADLINE

Quality Inspection and Sampling ServicesThe contract requires independent inspection and sampling of an adapter batch in strict compliance with MIL-STD-1916 or ASQ H1331 zero-defect sampling methodologies, ensuring rigorous adherence to quality standards. This includes thorough non-conformance evaluations and acceptance testing to verify that all units meet defined specifications before approval. The work is scoped under a subcontract for quality inspection and sampling services, with performance located at New Cumberland, Pennsylvania, 17070-5002. The North American Industry Classification System code 541340 identifies the service category as engineering services, and the contracting agency is the Fluid Handling Division within the Department of Defense. Responses are due by August 17, 2026, with the solicitation posted on August 4, 2026, and the work is expected to align with zero-defect expectations under military and industry-standard sampling protocols.

FLUID HANDLING DIVISION

POSTED

DEADLINE

Structural Engineering for School BuildingsThe contract involves providing structural engineering services for the design of new and renovated K-12 school buildings, ensuring full compliance with Georgia building codes and safety standards. The work is scoped for the Baldwin County Board of Education and requires expertise in delivering safe, code-compliant structural systems tailored to educational facilities, including load calculations, material specifications, seismic considerations, and coordination with other disciplines to support construction readiness. All designs must meet or exceed state-mandated requirements for durability, accessibility, and occupant safety in school environments. This is a subcontract opportunity with a NAICS code of 541340, indicating it falls under architectural and engineering services. The solicitation was posted on August 4, 2026, with responses due by September 4, 2026. Performance will take place within Georgia, though specific locations are not outlined. The contract is not subject to a set-aside classification, making it open to all eligible subcontractors. Interested parties should review the official UI link for further submission instructions and requirements, as no point of contact details are provided within the data.

Baldwin County Board of Education

POSTED

DEADLINE

System Testing, Commissioning, and TrainingThe contract encompasses functional testing, commissioning, user acceptance testing, troubleshooting, and on-site staff training for the operation and response procedures of an alarm system. These activities are critical to ensuring the system functions as intended, meets defined performance standards, and is fully operational before handover. The scope includes validating system integrations, identifying and resolving anomalies, and equipping personnel with the knowledge and skills to effectively respond to alarm events in real-world conditions. This subcontract is issued under the Government of Jamaica through JCA Project and Initiatives Implementation, with the NAICS code 541340 indicating it pertains to other scientific and technical consulting services. The posting date indicates the opportunity became available in August 2026, and while the specific location details are not provided, the place of performance is expected to be within Jamaica. The contract emphasizes practical, hands-on training and real-time system validation to ensure long-term operational readiness and reliability of the alarm system infrastructure.

JCA Project and Initiatives Implementation

POSTED

DEADLINE

Commissioning, Testing, and System ValidationThe contract involves the commissioning, testing, and system validation of uninterruptible power supply (UPS) systems at an airport facility in Jamaica to ensure functional integrity, load capacity, and failover reliability under operational conditions. The work is scoped to include comprehensive performance testing under real-world and simulated stress conditions to verify that the UPS systems can maintain critical power continuity during grid fluctuations or outages, directly supporting the airport’s operational readiness and safety protocols. The testing scope encompasses not only initial functional checks but also load testing to confirm system capacity under full demand and failover validation to ensure seamless transitions between power sources without disruption to essential airport services. This subcontract is issued under the Government of Jamaica’s JCA Project and Initiatives Implementation division, classified under NAICS code 541340 for engineering services, and is intended to support infrastructure reliability critical to aviation operations. The posting date indicates an anticipated award timeline in 2026, with no solicitation number or set-aside details provided, suggesting a direct award or internal procurement process. All testing activities are to be performed at the airport’s location, with the full responsibility for execution, documentation, and validation resting with the selected contractor to meet stringent performance benchmarks required for a high-traffic transportation hub.

JCA Project and Initiatives Implementation

POSTED

DEADLINE

Geotechnical Investigation and Soil TestingBen Hill County Board of Commissioners has issued a subcontract for geotechnical investigation and soil testing to support the design of a landfill closure system. The work requires subsurface exploration, targeted soil sampling, and comprehensive laboratory analysis to evaluate soil properties, slope stability, and compatibility with liner materials. The project is critical for ensuring the long-term structural integrity and environmental safety of the closure. Proposals must be submitted by September 8, 2026, and the contract falls under NAICS code 541340, categorizing it as a geotechnical engineering service. The solicitation was posted on August 4, 2026, and performance is expected to take place within the jurisdiction of Georgia, though specific location details are not provided. The agency is seeking qualified contractors capable of delivering precise, defensible geotechnical data to inform engineering decisions for landfill closure.

Ben Hill County Board of Commissioners

POSTED

DEADLINE

in about 1 month

Vibration Control and Structural MonitoringThe contract focuses on implementing vibration control measures and real-time monitoring systems to safeguard nearby coastal structures and sensitive ecosystems during dredging and sediment placement operations. It requires specialized engineering solutions to mitigate ground-borne vibrations that could damage shorelines, marine habitats, or infrastructure, with continuous data collection to ensure compliance and environmental protection throughout the project lifecycle. The work demands advanced sensor networks, adaptive mitigation protocols, and immediate response capabilities to adjust operations based on real-time environmental feedback. This is a subcontract under the NAICS code 541340 for engineering services, issued by the Department of Defense through its W074 Endist Jacksnvlle office. The solicitation was posted on August 4, 2026, with responses due by August 13, 2026, and performance will occur at an unspecified coastal location. The project emphasizes operational precision, environmental stewardship, and adherence to defense-related construction standards, requiring contractors to demonstrate proven expertise in marine geotechnical monitoring and ecosystem protection during heavy engineering activities.

W074 Endist Jacksnvlle

POSTED

DEADLINE

Hardware-in-the-Loop (HIL) Integration

POSTED

DEADLINE

Launch, Sea Trials, and Stability TestingThe contract titled Launch Sea Trials and Stability Testing requires the successful re-launch of a vessel followed by comprehensive dock and sea trials to ensure full operational readiness, with a mandatory stability test conducted to validate structural and navigational safety under real-world conditions. Final verification of all performance metrics must be achieved and certified at Hold Point HP-5, serving as the critical milestone before project closure. The work is to be performed at West Point with a zip code of 10996 under the oversight of the Department of Defense through its W6QM Micc-West Point office, emphasizing strict adherence to military standards and protocols. This subcontract is designated as a Small Business Set Aside - Total, exclusively available to businesses certified under the SBA program, and falls under the NAICS code 541340 which relates to engineering services. Proposals must be submitted by August 10 2026 at 4:00 PM Eastern Time, following the posting date of August 4 2026. The solicitation is part of a broader Department of Defense initiative to ensure vessel integrity and maritime readiness, and all work must conform to the technical and procedural requirements tied to HP-5 verification, with no deviations permitted without formal approval.

W6QM Micc-West Point

POSTED

DEADLINE

Bridge and Structural DesignThe contract is for comprehensive design services related to minor and major bridges, encompassing structural analysis, load ratings, and the preparation of detailed construction drawings. The work is expected to meet technical standards required for public infrastructure projects and will be performed under a subcontract arrangement. The solicitation was posted on August 4, 2026, with a response deadline of September 1, 2026, and is classified under NAICS code 541340 for engineering services. The contracting agency is the Georgia Department of Transportation, and performance will occur within the state of Georgia, though specific locations are not detailed. There is no set-aside designation specified, and no point of contact information is provided in the posting. All proposals must be submitted through the official online portal before the deadline.

Department of Transportation-2

POSTED

DEADLINE

More opportunities from Department Of Veterans Affairs → 250-NETWORK Contract Office 10 (36C250)

Same awarding agency

Surgical Table Installation, Inspection, and Start-Up ServicesThe contract calls for comprehensive on-site services to uncrate, inspect, and commission two STERIS 7080 surgical tables at a Department of Veterans Affairs facility. The work requires precise handling during uncrating to prevent damage, followed by thorough inspection to verify component integrity and alignment. Functional validation must confirm the tables meet all operational specifications including weight capacity, power system responsiveness, precise positioning controls, and integrated safety features designed to protect patients and staff during use. All activities must be performed in accordance with manufacturer guidelines and industry standards for medical equipment installation. This subcontract is open for response until August 12, 2026, and is classified under NAICS code 811212 for medical equipment and supplies repair and maintenance. The requirement is managed by the 250-NETWORK Contract Office 10 and is part of a broader effort to ensure critical surgical equipment is properly installed and operational within VA healthcare facilities. The scope demands certified technicians with experience in advanced surgical table systems and the ability to document compliance with validation protocols, with performance expected on-site at an undefined location within the VA infrastructure.

Computer and Office Machine Repair and Maintenance

POSTED

DEADLINE

Supply of Standard Accessory Packages (MPN BF425)The contract requires the supply of two standard accessory packages designated as MPN BF425, each consisting of a 2-inch anesthesia armboard pad and an extra long restraint strap, specifically designed for compatibility with STERIS 7080 surgical tables. These components are essential for patient positioning and safety during surgical procedures and must meet exact technical specifications to ensure seamless integration with the designated equipment. The solicitation is issued as a subcontract under the Department of Veterans Affairs, managed by the 250-NETWORK Contract Office 10, and falls under NAICS code 339113 for surgical and medical instrument manufacturing. The opportunity was posted on August 5, 2026, with a response deadline of August 12, 2026, at 9:00 PM, indicating a tight turnaround for proposal submissions. There is no set-aside designation specified, and the place of performance and point of contact details are not provided, suggesting the work may be delivered remotely or to a standard distribution point.

Surgical Appliance and Supplies Manufacturing

POSTED

DEADLINE

Supply of STERIS 7080 General Surgical TablesThe contract seeks the procurement and delivery of two STERIS 7080 General Surgical Tables with specific configurations, including a dual articulating head, a featherweight leg section, and TLT pads, ensuring the equipment meets precise clinical and operational requirements. The solicitation is issued under the NAICS code 339112, categorizing it within medical equipment manufacturing, and is structured as a subcontract under the Department of Veterans Affairs through the 250-NETWORK Contract Office 10. The offeror must respond by the deadline of August 12, 2026, at 9:00 PM, with the posting date indicating the opportunity was made available on August 5, 2026. Place of performance and point of contact details are not specified, suggesting that delivery logistics and vendor coordination will be established post-award. The contract is not subject to any set-aside designation, meaning it is open to general competition without preference for small, minority-owned, or other designated business categories.

Surgical and Medical Instrument Manufacturing

POSTED

DEADLINE

Preventative Maintenance Documentation & ReportingThe contract entails the systematic compilation and reporting of preventative maintenance documentation including maintenance logs, completion reports, and equipment condition summaries, to be submitted to the VA Contracting Officer’s Representative or Contracting Officer's Technical Representative. The work requires adherence to standardized procedures and may involve the use of the Contract Management Information System or other VA-approved digital platforms to ensure accurate and timely data submission. All deliverables must meet federal compliance standards and reflect the operational status of maintained equipment within the designated facility. This is a Small Business Set Aside subcontract under NAICS code 541611, open exclusively to small businesses, with a posting date of August 5, 2026, and a response deadline of August 21, 2026. Performance is located in Indianapolis, Indiana, with the Department of Veterans Affairs through the 250-NETWORK Contract Office 10 (36C250) as the overseeing agency. The contractor must ensure all documentation is complete, accurate, and submitted in alignment with VA requirements, supporting ongoing maintenance operations and compliance initiatives at the specified location.

Administrative Management and General Management Consulting Services

POSTED

DEADLINE

Variable Frequency Drive (VFD) Maintenance – York UnitsThis contract requires preventative maintenance services for York-manufactured Variable Frequency Drives, covering comprehensive diagnostics, firmware updates, cooling system inspections, and electrical integrity testing to ensure optimal operational performance and longevity. The work is scoped specifically for York VFD units and must be performed in accordance with industry best practices and manufacturer guidelines, with all activities focused on proactive system reliability rather than reactive repairs. The contract is a small business set-aside under NAICS code 238210, issued by the Department of Veterans Affairs through the 250-NETWORK Contract Office 10, with performance expected in Indianapolis, Indiana, ZIP 46202. It is classified as a subcontract under a federal procurement vehicle, with a response deadline of August 21, 2026, and was posted for solicitation on August 5, 2026. Participation is limited to qualified small businesses, and all proposals must address the technical scope of work while meeting compliance and performance standards tied to federal contracting requirements.

Electrical Contractors and Other Wiring Installation Contractors

POSTED

DEADLINE

Variable Frequency Drive (VFD) Maintenance – Toshiba UnitsThis contract requires comprehensive preventative maintenance on Toshiba Variable Frequency Drives (VFDs) linked to chiller systems, encompassing a full range of service activities including cleaning, thermal imaging, firmware validation, calibration, and electrical safety inspections to ensure optimal performance and operational reliability. The scope is focused specifically on Toshiba units and demands technical expertise in industrial drive systems, with all work intended to prevent unexpected failures and extend equipment lifecycle. The opportunity is designated as a Small Business Set Aside under NAICS code 238210, which classifies it within electrical contracting services, and is issued by the Department of Veterans Affairs through the 250-NETWORK Contract Office 10. The place of performance is in Indianapolis, Indiana, with a response deadline of August 21, 2026, and the solicitation was posted on August 5, 2026. Only small businesses meeting SBA eligibility requirements may submit proposals, and the contract is structured as a subcontract, indicating it may support a larger project or prime contractor arrangement.

Electrical Contractors and Other Wiring Installation Contractors

POSTED

DEADLINE

Centrifugal Chiller Preventative Maintenance (1 x 500-ton Unit)A full preventative maintenance cycle is being solicited for one 500-ton York centrifugal chiller, encompassing comprehensive checks of the mechanical, electrical, and control systems to ensure optimal performance and longevity. The contract is structured as a subcontract under a Small Business Set Aside designation, specifically targeting small businesses, with the NAICS code 238220 indicating it falls under Mechanical Equipment Installation and Repair Services. The work is to be performed at a location in Indianapolis, Indiana, with a zip code of 46202, and is managed by the Department of Veterans Affairs through the 250-NETWORK Contract Office 10. The opportunity was posted on August 5, 2026, with responses due by August 21, 2026, at 9:00 PM Eastern Time, requiring interested parties to submit proposals within this window to be considered for award.

Plumbing, Heating, and Air-Conditioning Contractors

POSTED

DEADLINE

Centrifugal Chiller Preventative Maintenance (4 x 1,000-ton Units)The contract covers comprehensive preventative maintenance for four 1,000-ton York centrifugal chillers, including routine inspections, lubrication, alignment checks, vibration analysis, refrigerant level verification, electrical system testing, and performance optimization to ensure operational efficiency and longevity. All work is scheduled to be performed at the facility located in Indianapolis, Indiana, with a zip code of 46202, and must comply with industry standards for commercial refrigeration and HVAC system maintenance. This is a small business set-aside subcontract under NAICS code 238220, reserved exclusively for qualified small businesses, and is issued by the Department of Veterans Affairs through the 250-NETWORK Contract Office 10. The solicitation was posted on August 5, 2026, and responses are due by August 21, 2026, with no solicitation number assigned. Performance is expected to be delivered on-site at the designated location, and contractors must be prepared to meet all technical and compliance requirements associated with maintaining large-scale industrial chilling systems.

Plumbing, Heating, and Air-Conditioning Contractors

POSTED

DEADLINE

Olympus Proprietary System Certification and SupportThis contract pertains to proprietary technical support for Olympus endoscopy monitors, requiring authorized oversight to ensure compliance with manufacturer standards. The scope includes performing firmware updates, validating warranty coverage, and maintaining system integrity per Olympus specifications, with all work tied to certification protocols that only approved providers can execute. The technical services must be delivered in accordance with strict operational guidelines to preserve device functionality and regulatory compliance within clinical environments. The contract is classified as a subcontract under NAICS code 541512 and is managed by the Department of Veterans Affairs through the 250-NETWORK Contract Office 10. Performance is required at a specified location in Detroit, Michigan, with a response deadline of August 11, 2026. No set-aside provisions are in effect, and participation is limited to entities capable of providing authorized Olympus technical services. The solicitation emphasizes adherence to proprietary protocols and does not permit third-party or non-certified interventions, making authorization from Olympus a prerequisite for eligibility.

Computer Systems Design Services

POSTED

DEADLINE

Site Restoration and Finish WorkThe contract pertains to the repair and restoration of ceilings, walls, and flooring within a medical facility that were disrupted during the installation of cabling infrastructure. The work must return all affected areas to their original condition, ensuring that surfaces are seamlessly restored to match existing finishes, maintaining both aesthetic and functional standards appropriate for a healthcare environment. This includes addressing any damage caused by routing, drilling, or mounting associated with cabling systems, with an emphasis on precision, cleanliness, and compliance with facility-specific protocols. The solicitation is issued as a subcontract under the NAICS code 238390, which identifies it as other building finishing contractors, and is managed by the Department of Veterans Affairs through the 250-NETWORK Contract Office 10. The place of performance is in Detroit, Michigan, with a zip code of 48201. Bidders must submit responses by the deadline of August 11, 2026, at 7:00 PM Eastern Time, with the opportunity posted on August 5, 2026. All work is expected to comply with the strict operational and safety requirements of a medical facility, and the contractor must coordinate activities to minimize disruption to ongoing healthcare services.

Other Building Finishing Contractors

POSTED

DEADLINE

Legacy Cabling Removal and DisposalThe contract titled Legacy Cabling Removal and Disposal pertains to the safe and environmentally compliant removal of legacy 3G cabling, with full site cleanup and restoration of finished areas to meet required standards. This subcontract, issued by the Department of Veterans Affairs through the 250-NETWORK Contract Office 10, is focused on ensuring that all cabling materials are handled in accordance with environmental regulations, minimizing hazardous impact and proper disposal protocols. The work is to be performed at a location in Detroit, Michigan, with a zip code of 48201, and all activities must be completed with strict attention to safety, regulatory compliance, and post-removal site conditions. Bids for this subcontract are due by August 11, 2026, at 7:00 PM, following its posting on August 5, 2026, under NAICS code 562991, which classifies it under Other Remediation Services. There is no set-aside designation specified, indicating the opportunity is open to all eligible contractors. The contract does not list a point of contact, and official inquiries or submissions must follow the procedures outlined via the provided SAM.gov link. Contractors must be prepared to demonstrate experience in handling electronic waste, deinstallation of telecommunications infrastructure, and restoration of affected environments to their pre-work condition.

Septic Tank and Related Services

POSTED

DEADLINE

Structured Cabling Installation – 12G CablingThe contract requires the installation of 12G high-speed data cabling within a healthcare facility located in Detroit, Michigan, with a zip code of 48201. The scope includes full cabling services such as routing, termination, labeling, and comprehensive electrical testing to ensure compliance with performance standards in a sensitive medical environment. The work is classified under NAICS code 238220, indicating it falls under electrical and other wiring installation contractors, and is structured as a subcontract. The solicitation was posted on August 5, 2026, with a firm deadline for responses set for August 11, 2026, at 7:00 PM. The contracting activity is managed by the Department of Veterans Affairs through the 250-NETWORK Contract Office 10 (36C250), and while no specific point of contact is listed, all work must be performed on-site at the Detroit location. The project demands precision and adherence to healthcare facility protocols, emphasizing reliability, security, and minimal disruption to ongoing operations.

Plumbing, Heating, and Air-Conditioning Contractors

POSTED

DEADLINE