Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

Variable Frequency Drive (VFD) Maintenance – York Units

Active

Federal

Response Deadline08/21/2026, 09:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This contract requires preventative maintenance services for York-manufactured Variable Frequency Drives, covering comprehensive diagnostics, firmware updates, cooling system inspections, and electrical integrity testing to ensure optimal operational performance and longevity. The work is scoped specifically for York VFD units and must be performed in accordance with industry best practices and manufacturer guidelines, with all activities focused on proactive system reliability rather than reactive repairs. The contract is a small business set-aside under NAICS code 238210, issued by the Department of Veterans Affairs through the 250-NETWORK Contract Office 10, with performance expected in Indianapolis, Indiana, ZIP 46202. It is classified as a subcontract under a federal procurement vehicle, with a response deadline of August 21, 2026, and was posted for solicitation on August 5, 2026. Participation is limited to qualified small businesses, and all proposals must address the technical scope of work while meeting compliance and performance standards tied to federal contracting requirements.

General Info

Preventative maintenance for York VFDs in Indianapolis, small business set-aside, contract deadline August 21, 2026.

Agency

Department Of Veterans Affairs → 250-NETWORK Contract Office 10 (36C250)View Agency

NAICS

238210 - Electrical Contractors and Other Wiring Installation ContractorsView NAICS

Place of Performance

Indianapolis, OH, 46202

Set-Aside

SBA

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedAug 5

subcontract

Response DeadlineAug 21

Submission deadline

Response Deadline

08/21/2026, 09:00:00 PM UTCin 15 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Veterans Affairs → 250-NETWORK Contract Office 10 (36C250)

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Veterans Affairs → 250-NETWORK Contract Office 10 (36C250)

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Preventative maintenance on York-manufactured VFDs, including diagnostics, firmware updates, cooling system checks, and electrical integrity testing.

Similar Contracts

Same NAICS industry code

Elevator Lobby 2 Way CommunicationsThe contract involves the installation of 23 new two-way communication boxes in elevator lobbies across the terminal, including 17 passenger elevators, three service elevators, and three ramp landing elevators. This work is part of a broader effort to enhance emergency communication infrastructure within the airport facility and is being managed by the Aviation Project Management Group under the Port of Seattle. The project is forecasted with a posting date of July 31, 2026, and falls under NAICS code 238210, indicating it pertains to electrical contracting services. Primary point of contact is Angela Peterson, with Christina Burdett serving as the project manager, and all correspondence should be directed through the provided email addresses and phone numbers. The work location is at the Port of Seattle facility, though specific city or state details are not provided in the data.

Aviation Project Management Group

POSTED

about 6 hours ago

DEADLINE

Variable Frequency Drives (VFD) Replacement Phase 3 (DBB)The Port of Seattle will replace 125 aging Robicon variable frequency drives (VFDs) with new equipment as part of Phase 3 of its VFD Replacement initiative. This effort aims to upgrade outdated infrastructure to ensure system reliability and improve operational efficiency across aviation facilities and infrastructure. The new VFDs will be fully integrated with the Port’s Direct Digital Controller (DDC) system to enable real-time energy usage monitoring, output control readings, and efficiency tracking, enhancing the Port’s ability to manage power consumption and maintain optimal performance. The scope includes all necessary wiring, testing, commissioning, and installation of associated equipment required to deliver a fully functional and synchronized system. The work falls under NAICS code 238210 and is managed by the Aviation Facilities & Infrastructure division, with technical oversight from Project Manager Sharon Miick and primary point of contact Yanet Maldonado. Although the solicitation number and set-aside details are not specified, the forecast was posted on July 31, 2026, signaling upcoming procurement activities. The project is critical for modernizing the Port’s electrical infrastructure and supporting long-term sustainability goals through precise control and monitoring of motor-driven systems. All work must be performed on-site at the Port’s facilities, with full accountability for system integration, performance validation, and operational readiness upon completion.

Aviation Facilities & Infrastructure

POSTED

about 6 hours ago

DEADLINE

Operational Security Cameras Bagwell and North Cargo AreasThe contract requires the provision of design, permitting, and construction services to install 50 high-resolution cameras across 43 sites in the Bagwell and North Cargo Operations areas of the Port of Seattle. The primary objective is to enhance security and enforcement capabilities by replacing outdated systems with improved coverage, specifically targeting main terminal drive lanes and entrances previously unmonitored, with the goal of supporting forensic investigations and adherence to port movement rules. In the Bagwell area, the new cameras will shift focus from conveyor systems and security doors to critical transit corridors, while the North Cargo operations will benefit from flexible, user-controlled Pan Tilt Zoom units that provide broad surface area monitoring and dynamic viewing capabilities to address operational gaps. All work must be completed in accordance with specified technical and operational standards to ensure seamless integration with existing security infrastructure. The project is managed by the Aviation Project Management Group under the Port of Seattle, with primary point of contact Angela Peterson and Project Manager Randa Williams available for coordination. The North American Industry Classification System code 238210 identifies this as a specialty trade contracting effort focused on electrical and communication system installation. Although the solicitation has not yet been formally issued, the forecasted posting date is July 31, 2026, indicating this is a forward-looking opportunity for qualified contractors to prepare proposals. The place of performance is within the Port of Seattle’s operational boundaries, and all contractors must be prepared to navigate port-specific logistics, security protocols, and environmental constraints during installation and commissioning.

Aviation Project Management Group

POSTED

about 6 hours ago

DEADLINE

Rental Car Facility (RCF) Quick Turn Around (QTA) Area Fire Suppression System Replacement (Re-bid)The Port of Seattle’s Aviation Project Management Group is planning to replace the existing Aqueous Film Forming Foam (AFFF) fire suppression system at the Rental Car Facility located in SeaTac with a full dry chemical system to eliminate contamination from per- and polyfluoroalkyl substances (PFAS). The project entails the complete removal of the current foam-based system, including all contaminated components such as tanks, piping, and sprinkler heads, followed by the design and installation of a new dry system comprising new storage tanks, control valves, pumps, sprinkler lines, and sprinkler heads, along with reserve tanks for system integrity. The new system must be fully integrated with the facility’s existing Fire Alarm System to ensure seamless operation and compliance with safety protocols. The work is classified under NAICS code 238210 and is being advertised as a re-bid under the title Rental Car Facility (RCF) Quick Turn Around (QTA) Area Fire Suppression System Replacement, targeting an efficient and timely execution to minimize service disruption. Primary point of contact for inquiries is Todd Rehm, with Pat Nakamura serving as the Project Manager.

Aviation Project Management Group

POSTED

about 6 hours ago

DEADLINE

Parking Garage UPSThe contract involves the demonstration and full replacement of the existing uninterruptible power supply (UPS) system in a parking garage that supports critical operations including ticketing kiosks and automated gates. The scope includes installing new UPS equipment along with associated electrical infrastructure such as subpanels, feeders, disconnects, and circuit breakers to ensure reliable backup power. The new UPS system will feature integrated data connections to enable remote alarm monitoring and system diagnostics, enhancing operational awareness and response capabilities. All work will be performed at the Port of Seattle’s parking facility, under the oversight of the Aviation Project Management Group. The project is forecasted to be released on July 31, 2026, with no set-aside provisions indicated and NAICS code 238210 specifying electrical contracting services. Primary point of contact is Yanet Maldonado, reachable via email and phone, with JJ Jordan serving as the project manager for coordination and technical inquiries. All work must comply with the operational and safety standards required by the Port of Seattle, and performance is expected to be completed at the designated parking garage location without specified alternative sites.

Aviation Project Management Group

POSTED

about 6 hours ago

DEADLINE

Electrical Unit Price Portwide 2026_1 and _2This contract encompasses a broad range of electrical services to be performed across multiple Port of Seattle facilities including Seattle-Tacoma International Airport, maritime properties, and surrounding areas. The work includes but is not limited to the installation of raceways, wiring, medium voltage cabling, electrical boxes, transformers, temporary power and lighting systems, grounding, and associated testing, all in full compliance with applicable codes and regulations. The Contractor is responsible for providing all labor, tools, equipment, materials, and incidentals required to complete tasks as directed through Work Authorizations issued by the Port. Labor must be delivered according to the specified classifications outlined in the Schedule of Unit Prices, ensuring consistent pricing and accountability. The Port of Seattle anticipates a high volume of small-scale electrical projects over the coming year and plans to award two separate contracts under this solicitation to ensure sufficient capacity and rapid response times. The goal is to maintain operational continuity and meet dynamic project demands by leveraging two qualified contractors. The contract is identified under the NAICS code 238210 and is issued through Port Construction Services, with primary coordination handled by Heather Bowden and Lesley Miles. All work must be performed at designated Port-wide locations, and contractors are expected to adhere strictly to the terms and pricing structure detailed in the bid documents.

Port Construction Services

POSTED

about 6 hours ago

DEADLINE

RFO AWP-0772-00, HNL Fiber Optic Transmission System (FOTS) Design Support and Construction in Honolulu, HI

Solicitation # rfo-awp-0772-00-hnl-fiber-optic-transmission-system-fots-design-support-construction-honolulu-hi-0

Parsons Subcontract Administrator Anna Ma is managing a solicitation for the installation of a new Fiber Optic Transmission System at Daniel K. Inouye International Airport in Honolulu, Hawaii, with work divided into two phases involving conduit trenching and boring between three buildings. The project is classified under NAICS codes 238210, 237130, and 237990, with an estimated construction value between one and five million dollars. The solicitation, designated RFO AWP-0772-00, is set to close on August 15, 2026, and is designated for small business set-asides, including Small Business, Small Disadvantaged Business, Women-Owned Small Business, HUBZone, Veteran-Owned, and Service-Disabled Veteran-Owned Small Businesses. The work is under the oversight of PTSI Managed Services, Inc. and is exclusively open to qualified firms that respond to the solicitation through the provided point of contact, with all correspondence directed to Anna Ma at anna.t-ctr.ma@faa.gov.

PTSI Managed Services, Inc.

POSTED

about 6 hours ago

DEADLINE

RFO AWP-0772-00, HNL Fiber Optic Transmission System (FOTS) Design Support and Construction in Honolulu, HI

Solicitation # rfo-awp-0772-00-hnl-fiber-optic-transmission-system-fots-design-support-construction-honolulu-hi

The contract involves the installation of a new Fiber Optic Transmission System (FOTS) at Daniel K. Inouye International Airport in Honolulu, Hawaii, with work divided into two distinct phases. The project encompasses conduit trenching and directional boring between three airport buildings to support the deployment of underground fiber optic infrastructure. The estimated construction value falls between one million and five million dollars, and the work aligns with NAICS codes 238210, 237130, and 237990, indicating a focus on electrical and communication installations, as well as other heavy and civil engineering construction. The solicitation is set aside exclusively for small business categories, including Small Disadvantaged Businesses, Women-Owned Small Businesses, HUBZone Small Businesses, Veteran-Owned Small Businesses, and Service-Disabled Veteran-Owned Small Businesses. The solicitation number is RFO AWP-0772-00, with a response deadline of August 15, 2026, and inquiries should be directed to Anna Ma, Parsons Subcontract Administrator, via email at anna.t-ctr.ma@faa.gov or phone at 360-204-4418.

PTSI Managed Services, Inc.

POSTED

about 6 hours ago

DEADLINE

Replacement Fiber Line

Solicitation # Replacement Fiber Line

The contract requires the replacement of existing multi-mode fiber optic cabling with a new 12-strand single-mode fiber optic cable system connecting Building 2436 to Building 2443 at the Earle C. Clements Job Corps Center in Morganfield, Kentucky. The work includes removing retired multi-mode aerial fiber lines and splice boxes from utility poles and installing new 12-strand OS2 OSP fiber using center-owned poles, with specific equipment requirements including Belden FS3L0024NS fiber, ECX-01U rack-mounted enclosures, FFSX12LD adapter panels, and FTSLC900FS01 LC connectors or approved equivalents. All labor, tools, equipment, and materials are the contractor’s responsibility, except for SFPs, which will be provided by Job Corps. The project is structured as a fee-for-service contract with a lump sum pricing model, and the contractor must submit weekly or bi-weekly invoices detailing purchase order numbers, service dates, itemized pricing with extended totals, and invoice references. The place of performance is clearly defined at the Job Corps Center, and acceptance occurs upon delivery at the MTC-designated point after final inspection, with the contractor warranting all work and materials to conform to specifications, be merchantable, of good workmanship, and free from defects. The solicitation is limited to small business set-asides including SBA-recognized categories such as Small Business, Small Disadvantaged Business, Women-Owned Small Business, HUBZone, Veteran-Owned, and Service-Disabled Veteran-Owned Small Business, with NAICS code 238210 and a size standard of $19.0 million. The contractor must comply with Service Contract Labor Standards under WD# 2015-4687 (Rev 31), the Contract Work Hours and Safety Standards Act for overtime compensation, and DBA wage requirements, with full responsibility for ensuring subcontractors adhere. Compliance with FAR clauses includes reporting executive compensation, clauses incorporated by reference from February 1998, and data rights provisions. First-tier subcontractors exceeding $30,000 must disclose debarment status, and all contractors must provide proof of insurance with $1 million per occurrence/$3 million aggregate general liability, $1 million auto coverage, and $500,000 workers’ compensation, naming MTC as the certificate holder and additional insured. The contractor must indemnify MTC against liabilities arising from their

Earle C. Clements Job Corps Center

POSTED

about 6 hours ago

DEADLINE

AEA-0536, VORTAC (ART) Doppler Conversion, Watertown, NY

Solicitation # aea-0536-vortac-art-doppler-conversion-watertown-ny

The FAA is upgrading an existing VHF Omnidirectional Range (VOR) facility in Watertown, New York, to a modern Doppler VORTAC system with an offset TACAN component, requiring the complete demolition of the current infrastructure. The new Doppler VORTAC will be built on-site with a 37’x37’ steel building featuring a 60-foot diameter counterpoise integrated into the roof, along with required foundations, site preparation, and utility connections. Accompanying the main structure is an offset TACAN system mounted on a 16’x16’x20’ steel walk-up tower, which will also include dedicated foundations, site work, and utility infrastructure. The project is solicited under contract number AEA-0536, with a response deadline of August 28, 2026, and is set aside for small business concerns including small disadvantaged, women-owned, HUBZone, veteran-owned, and service-disabled veteran-owned small businesses. The contracting organization is PTSI Managed Services, Inc, operating under Parsons, and the primary point of contact for inquiries is Angela Stydinger of the FAA.

PTSI Managed Services, Inc (Parsons)

POSTED

about 6 hours ago

DEADLINE

Argyle Park Community Centre – Lighting, Fire Alarm and Electrical Upgrades

Solicitation # COR26-00239

The City of Regina is soliciting proposals for electrical upgrade services at the Argyle Park Community Centre, specifically targeting improvements to lighting systems and fire alarm infrastructure to enhance safety, reliability, code compliance, energy efficiency, and overall functionality. All submissions must be clearly labeled with the solicitation number COR26-00239 and sent via email to procurement@regina.ca no later than 2:00 p.m. Central Standard Time on August 26, 2026. The selected contractor will be responsible for evaluating existing systems, supplying and installing all required equipment, performing thorough testing and commissioning, and delivering complete documentation verifying that all upgraded systems meet applicable codes and standards. A mandatory pre-submission meeting is scheduled for August 11, 2026, at 9:00 a.m. at the community centre located at 35 Davin Crescent, Regina, Saskatchewan, to address inquiries from interested vendors. This procurement is governed by trade agreements including Chapter 5 of the Canadian Free Trade Agreement, Chapter 19 of the Comprehensive Economic and Trade Agreement, and Article 14 of the New West Partnership Trade Agreement. While there will be no public opening of submissions, the names of all respondents will be published on the Sasktenders website following the deadline.

POSTED

about 13 hours ago

DEADLINE

On-Call Electrical Services for the Saskatoon Area

Solicitation # 251-2026

The Government of Saskatchewan, through SaskBuilds and Procurement, is inviting qualified electrical contractors to apply for non-exclusive, multi-year on-call agreements to provide maintenance and repair services for government facilities in the Saskatoon area. These services will include both routine and emergency electrical work across multiple locations, with contractors expected to respond promptly to requests as they arise. Proposals will be assessed based on the applicant’s experience, ability to deliver timely and reliable service, capacity to meet response time requirements, and competitive pricing. Participation is restricted to suppliers registered in the Government Enterprise Management system, where all competition documents, amendments, and updates will be posted. Only registered users may download bidding materials, submit inquiries, and submit formal proposals. To participate, interested suppliers must complete mandatory self-registration through the GEM portal before the bid deadline of August 26, 2026. Registration can be initiated via the Negotiation Abstracts Page using the solicitation number 251-2026 or the title On-Call Electrical Services for the Saskatoon Area. All communications, including clarifications and revisions, will be conducted solely through the GEM platform, and failure to register will disqualify a supplier from submitting a bid. The opportunity is open to any qualified electrical contractor, with no set-aside provisions, and no specific NAICS code has been assigned. For assistance, suppliers may contact the provided support email address. All activity regarding this solicitation is managed through the provincial procurement system, and no external documents or communications will be recognized as official.

SaskBuilds and Procurement

POSTED

about 13 hours ago

DEADLINE

More opportunities from Department Of Veterans Affairs → 250-NETWORK Contract Office 10 (36C250)

Same awarding agency

Surgical Table Installation, Inspection, and Start-Up ServicesThe contract calls for comprehensive on-site services to uncrate, inspect, and commission two STERIS 7080 surgical tables at a Department of Veterans Affairs facility. The work requires precise handling during uncrating to prevent damage, followed by thorough inspection to verify component integrity and alignment. Functional validation must confirm the tables meet all operational specifications including weight capacity, power system responsiveness, precise positioning controls, and integrated safety features designed to protect patients and staff during use. All activities must be performed in accordance with manufacturer guidelines and industry standards for medical equipment installation. This subcontract is open for response until August 12, 2026, and is classified under NAICS code 811212 for medical equipment and supplies repair and maintenance. The requirement is managed by the 250-NETWORK Contract Office 10 and is part of a broader effort to ensure critical surgical equipment is properly installed and operational within VA healthcare facilities. The scope demands certified technicians with experience in advanced surgical table systems and the ability to document compliance with validation protocols, with performance expected on-site at an undefined location within the VA infrastructure.

Computer and Office Machine Repair and Maintenance

POSTED

about 22 hours ago

DEADLINE

Supply of Standard Accessory Packages (MPN BF425)The contract requires the supply of two standard accessory packages designated as MPN BF425, each consisting of a 2-inch anesthesia armboard pad and an extra long restraint strap, specifically designed for compatibility with STERIS 7080 surgical tables. These components are essential for patient positioning and safety during surgical procedures and must meet exact technical specifications to ensure seamless integration with the designated equipment. The solicitation is issued as a subcontract under the Department of Veterans Affairs, managed by the 250-NETWORK Contract Office 10, and falls under NAICS code 339113 for surgical and medical instrument manufacturing. The opportunity was posted on August 5, 2026, with a response deadline of August 12, 2026, at 9:00 PM, indicating a tight turnaround for proposal submissions. There is no set-aside designation specified, and the place of performance and point of contact details are not provided, suggesting the work may be delivered remotely or to a standard distribution point.

Surgical Appliance and Supplies Manufacturing

POSTED

about 22 hours ago

DEADLINE

Supply of STERIS 7080 General Surgical TablesThe contract seeks the procurement and delivery of two STERIS 7080 General Surgical Tables with specific configurations, including a dual articulating head, a featherweight leg section, and TLT pads, ensuring the equipment meets precise clinical and operational requirements. The solicitation is issued under the NAICS code 339112, categorizing it within medical equipment manufacturing, and is structured as a subcontract under the Department of Veterans Affairs through the 250-NETWORK Contract Office 10. The offeror must respond by the deadline of August 12, 2026, at 9:00 PM, with the posting date indicating the opportunity was made available on August 5, 2026. Place of performance and point of contact details are not specified, suggesting that delivery logistics and vendor coordination will be established post-award. The contract is not subject to any set-aside designation, meaning it is open to general competition without preference for small, minority-owned, or other designated business categories.

Surgical and Medical Instrument Manufacturing

POSTED

about 22 hours ago

DEADLINE

Preventative Maintenance Documentation & ReportingThe contract entails the systematic compilation and reporting of preventative maintenance documentation including maintenance logs, completion reports, and equipment condition summaries, to be submitted to the VA Contracting Officer’s Representative or Contracting Officer's Technical Representative. The work requires adherence to standardized procedures and may involve the use of the Contract Management Information System or other VA-approved digital platforms to ensure accurate and timely data submission. All deliverables must meet federal compliance standards and reflect the operational status of maintained equipment within the designated facility. This is a Small Business Set Aside subcontract under NAICS code 541611, open exclusively to small businesses, with a posting date of August 5, 2026, and a response deadline of August 21, 2026. Performance is located in Indianapolis, Indiana, with the Department of Veterans Affairs through the 250-NETWORK Contract Office 10 (36C250) as the overseeing agency. The contractor must ensure all documentation is complete, accurate, and submitted in alignment with VA requirements, supporting ongoing maintenance operations and compliance initiatives at the specified location.

Administrative Management and General Management Consulting Services

POSTED

about 22 hours ago

DEADLINE

Variable Frequency Drive (VFD) Maintenance – Toshiba UnitsThis contract requires comprehensive preventative maintenance on Toshiba Variable Frequency Drives (VFDs) linked to chiller systems, encompassing a full range of service activities including cleaning, thermal imaging, firmware validation, calibration, and electrical safety inspections to ensure optimal performance and operational reliability. The scope is focused specifically on Toshiba units and demands technical expertise in industrial drive systems, with all work intended to prevent unexpected failures and extend equipment lifecycle. The opportunity is designated as a Small Business Set Aside under NAICS code 238210, which classifies it within electrical contracting services, and is issued by the Department of Veterans Affairs through the 250-NETWORK Contract Office 10. The place of performance is in Indianapolis, Indiana, with a response deadline of August 21, 2026, and the solicitation was posted on August 5, 2026. Only small businesses meeting SBA eligibility requirements may submit proposals, and the contract is structured as a subcontract, indicating it may support a larger project or prime contractor arrangement.

Electrical Contractors and Other Wiring Installation Contractors

POSTED

about 22 hours ago

DEADLINE

Centrifugal Chiller Preventative Maintenance (1 x 500-ton Unit)A full preventative maintenance cycle is being solicited for one 500-ton York centrifugal chiller, encompassing comprehensive checks of the mechanical, electrical, and control systems to ensure optimal performance and longevity. The contract is structured as a subcontract under a Small Business Set Aside designation, specifically targeting small businesses, with the NAICS code 238220 indicating it falls under Mechanical Equipment Installation and Repair Services. The work is to be performed at a location in Indianapolis, Indiana, with a zip code of 46202, and is managed by the Department of Veterans Affairs through the 250-NETWORK Contract Office 10. The opportunity was posted on August 5, 2026, with responses due by August 21, 2026, at 9:00 PM Eastern Time, requiring interested parties to submit proposals within this window to be considered for award.

Plumbing, Heating, and Air-Conditioning Contractors

POSTED

about 22 hours ago

DEADLINE

Centrifugal Chiller Preventative Maintenance (4 x 1,000-ton Units)The contract covers comprehensive preventative maintenance for four 1,000-ton York centrifugal chillers, including routine inspections, lubrication, alignment checks, vibration analysis, refrigerant level verification, electrical system testing, and performance optimization to ensure operational efficiency and longevity. All work is scheduled to be performed at the facility located in Indianapolis, Indiana, with a zip code of 46202, and must comply with industry standards for commercial refrigeration and HVAC system maintenance. This is a small business set-aside subcontract under NAICS code 238220, reserved exclusively for qualified small businesses, and is issued by the Department of Veterans Affairs through the 250-NETWORK Contract Office 10. The solicitation was posted on August 5, 2026, and responses are due by August 21, 2026, with no solicitation number assigned. Performance is expected to be delivered on-site at the designated location, and contractors must be prepared to meet all technical and compliance requirements associated with maintaining large-scale industrial chilling systems.

Plumbing, Heating, and Air-Conditioning Contractors

POSTED

about 22 hours ago

DEADLINE

Radioactive Material Delivery and Logistics Services

Specialized Freight (except Used Goods) Trucking, Local

POSTED

about 22 hours ago

DEADLINE

Supply of Tc99m-Sestamibi (Cardiac Imaging Agent)

Pharmaceutical Preparation Manufacturing

POSTED

about 22 hours ago

DEADLINE

Supply of 20% Sodium Chloride (NaCl) for Radiopharmaceutical Use

Industrial Gas Manufacturing

POSTED

about 22 hours ago

DEADLINE

Supply of Tc99m B (Unspecified Radiopharmaceutical)

Pharmaceutical Preparation Manufacturing

POSTED

about 22 hours ago

DEADLINE

Supply of Tc99m DTPA Renal Imaging Agent

Pharmaceutical Preparation Manufacturing

POSTED

about 22 hours ago

DEADLINE