Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →

This Subcontract opportunity from Department Of Transportation was posted on July 13, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Electrical Work for HVAC Integration

Closed
Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 238210
New
Inland Empire Job Corps-Request for Quote Electrical Repairs
Solicitation # Inland Empire Job Corps Electrical Repairs
Management & Training Corporation (MTC) is seeking bids for a subcontracting opportunity to perform electrical and fire alarm repairs at the Inland Empire Job Corps Center in San Bernardino, California. Under NAICS code 238210, the scope of work includes installing GFCI protection in cafeteria and academic areas, repairing open-ground conditions, installing filler plates in panelboards, and updating circuit directories and feeder labeling for multiple panelboards. All work must comply with National Electrical Code (NEC), NFPA, and applicable federal, state, and local regulations. The contract is a fee-for-service arrangement requiring a lump sum bid, and performance is subject to Service Contract Labor Standards wage determinations for Riverside and San Bernardino counties. Interested offerors must submit a bid sheet, a completed supplier packet including Form W-9 and self-certification, three professional references for similar projects, and proof of insurance by 3:00 PM PT on November 12, 2026. The opportunity is open to various small business categories, including VOSB, SDVOSB, WOSB, and HUBZone, with required SBA certification letters for those claiming specific statuses. Award selection is based on best value as determined by MTC. Successful contractors must maintain general liability insurance of at least 1,000,000 dollars and worker's compensation with employer's liability of 500,000 dollars, while adhering to strict federal guidelines regarding information security, the Buy American Act, and the prohibition of trafficking in persons.
Inland Empire Job Corps

POSTED

36 minutes ago

DEADLINE

in 3 days
NAICS: 238210
New
26-140 Installation of Emergency Shut Off Switches
Solicitation # 26-140
Solicitation 26-140 is a subcontracting opportunity with Atterbury Job Corps Center, operated by Adams and Associates, Inc. for the U.S. Department of Labor. The project requires the installation of emergency shut-off switches on power tools in the Maintenance and Glazing shops located in Edinburgh, Indiana. Specifically, the contractor must install mushroom-head push-button switches and new 60A, 208/120V, 3-phase, 4-wire, 6-circuit branch circuit panels with 60A shunt-trip main circuit breakers in both shops. All installations must include a minimum of 30% spare branch breakers and a manual reset function following power failures. Work must comply with FNC guidelines, national building codes, and EPA and OSHA regulations, with Indiana state regulations prevailing if more stringent. The procurement is set aside for small businesses, including VOSB, SDVOSB, WOSB, and HUBZone certifications. A mandatory site visit was scheduled for November 10, 2026, and proposals are due by November 20, 2026, via email to Tammy Swallows. Bidders must submit a single lump sum contract bid and provide a valid Indiana Contractor's License, W9, and certification of compliance with Davis Bacon Act wage rates. Award will be based on best value, evaluated by price (60 points), quality (20 points), past performance (10 points), and schedule (10 points). Contractors are required to maintain specific insurance coverages, including general liability of at least 1 million dollars per occurrence and automobile liability. Payment terms are Net 30. Upon receiving a Notice to Proceed, the contractor has 10 days to provide a sequenced construction schedule. The contract includes a one-year workmanship guarantee starting from the date of substantial completion. Final acceptance requires a walk-through and the correction of any punch list items within 14 days.
Atterbury Job Corps. – Adams & Associates

POSTED

36 minutes ago

DEADLINE

in 10 days
NAICS: 238210
New
Transformer Oil Testing Services
Solicitation # RFP-VC-26-010
The Inland Empire Utilities Agency is soliciting proposals under RFP-VC-26-010 for professional transformer oil testing services to enhance the reliability, safety, and maintainability of its transformers. The project scope encompasses three primary areas: performing visual and infrared thermographic inspections to identify thermal anomalies, installing standardized external oil sampling devices to improve safety during collection, and conducting oil testing analysis. Additionally, the selected contractor will evaluate nitrogen blanket systems, assess monitoring instrumentation, develop preventive maintenance checklists, and provide on-site training for agency staff. All work must be performed at designated agency facilities in Rancho Cucamonga and Chino, adhering to NETA MTS, IEEE, NFPA 70E, and ASTM D923 standards. The agency intends to make a single award to the most capable and cost-effective offeror. Evaluation criteria include a proven track record of at least two similar projects within the last five years, personnel qualifications, the proposed staffing plan, and the ability to meet the project timeline. Proposals must be submitted electronically via the PlanetBids portal by December 23, 2026, and must include a comprehensive set of documents, including a company profile, project methodology, and various certifications such as a Non-Collusion Statement and Workers Compensation Certificate. Payment will be processed electronically via ACH within 30 days of invoice approval by the Project Manager.
Inland Empire Utilities Agency

POSTED

36 minutes ago

DEADLINE

in about 1 month
NAICS: 238210
New
Centennial JCC Emergency Lighting Replacement, Upgrade, Testing & Maintenance Services
Solicitation # centennial-jcc-emergency-lighting-replacement-upgrade-testing-maintenance-services
Management & Training Corporation is soliciting bids for a fixed-price, single lump sum contract to provide emergency lighting replacement, upgrade, testing, and maintenance services at the Centennial Job Corps Center in Nampa, Idaho. The project, with an estimated value between $25,000 and $100,000, requires a qualified electrical contractor to inspect, repair, and certify emergency lighting systems in accordance with NFPA 101 (2024 Edition), NFPA 70, and OSHA regulations. Key deliverables include the application of durable tracking labels to each fixture and the integration of fixture data and a recurring 30-day functional testing schedule into the facility's Computerized Maintenance Management System. Bids are due by December 1, 2026, and will be awarded based on overall best value. Mandatory requirements for submission include a physical site visit, a signed bid form, and a detailed cost breakout. For bids of $25,000 or more, a bid bond guarantee of 20% is required, and the awarded contractor must provide performance and payment bonds from a surety with at least an A- rating. The contract is subject to the Davis-Bacon Act, Federal Contractor Minimum Wage requirements, and FAR standards regarding work hours, safety, and small business certifications. Compliance with Executive Order 13706 for paid sick leave and strict records management per DOL 2018-03 is also required.
Management & Training Corporation/Centennial Job Corps Center

POSTED

36 minutes ago

DEADLINE

in 22 days
NAICS: 238210
New
SLED
Audio & Visual Project
Solicitation # 27-4090-01
Burnet County is soliciting sealed bids for solicitation number 27-4090-01 to provide and install audio and visual equipment for the District and County Court at Law courtrooms. The project requires the contractor to furnish all labor, materials, equipment, and supervision to implement sound and visual presentation systems. Key technical specifications include control processors with a preferred capacity of 16 inputs and 8 outputs, sound and video control panels for the judge, the bench, and the bailiff, and a dedicated output for the court reporter. The successful bidder must commence work within ten calendar days of the contract execution. The contract will be awarded to the lowest responsible bidder based on factors including purchase price, vendor experience, quality of goods, safety records, and the total long-term cost to the county. Bidders must submit a bid bond for five percent of the contract amount, and performance and payment bonds are required for contracts exceeding 100,000 dollars and 25,000 dollars respectively. Compliance requirements include the Texas Ethics Commission Form 1295, certifications regarding non-discrimination against firearm entities for applicable contracts, and verification that the entity is not doing business with prohibited foreign organizations. Responses must be submitted by November 24, 2026, to the Burnet County Purchasing Office.
BURNET COUNTY

POSTED

about 9 hours ago

DEADLINE

in 14 days

AI Contract Overview

Show more

This subcontract opportunity, titled Electrical Work for HVAC Integration, is issued by the Department of Transportation through 697DCK Regional Acquisitions Svcs. The project requires the performance of electrical wiring, grounding, conduit installation, and the integration of a new HVAC system with existing power sources. All work must be completed in strict compliance with FAA and NEC standards. The project is located in Brian Head, Utah, and is designated as a Total Small Business Set-Aside under NAICS code 238210. The solicitation was posted on July 13, 2026, and the deadline for responses is August 13, 2026, at 7:00 PM.

General Info

Electrical HVAC integration in Brian Head, Utah; Small Business set-aside; due August 13, 2026.

NAICS

238210 - Electrical Contractors and Other Wiring Installation Contractors

Place of Performance

Brian Head, UT, 84719, USA

Set-Aside

SBA

Documents

This scope was carved out of 697DCK-26-R-00330.

The full solicitation package (7 documents), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

CDC ARSR HVAC Replacement

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PhaseClosed
Posted

subcontract

Response Deadline

Deadline has passed

Submission Closed

Find active opportunities like this

Get full access to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

Show more
AgencyDepartment Of Transportation → 697DCK Regional Acquisitions Svcs
ContactsNo contacts available
OfficeN/A
Office AddressN/A
ContactsNo contact information available

Full Description

Show more
Perform electrical wiring, grounding, conduit installation, and integration of the new HVAC system with existing power in compliance with FAA and NEC standards.

More opportunities from Department Of Transportation → 697DCK Regional Acquisitions Svcs

Same awarding agency

NAICS: 541330
New
Federal
Design Renovation, System Support Center (SSC), 3551 Combine St., Paso Robles, CA
Solicitation # 697DCK-27-R-00022A
The Federal Aviation Administration is seeking engineering design services for the renovation of a 4,992 square foot leased building to be used as a System Support Center located at 3551 Combine St., Paso Robles, California. The selected contractor will be responsible for developing permit-ready Mechanical, Electrical, Plumbing, Life Safety, and Fire Protection drawings based on provided Design Intent Drawings. Key deliverables include three full-size stamped drawing sets approved by the City of Paso Robles, a dedicated life safety sheet, and all necessary hydraulic and electrical load calculations. All work must comply with 2022 California Building Codes and local standards. This procurement is a Total Small Business Set-Aside, with the award intended for the lowest priced, responsible offeror based on a best-value determination. The period of performance is 130 days from the issuance of the Notice to Proceed. Interested offerors must be registered in the System for Award Management and provide past performance information for at least three relevant projects completed within the last five years. Following several amendments to answer vendor questions and extend deadlines, the final offer due date is November 30, 2026. Submissions must be emailed to the designated point of contact in PDF or Word format, ensuring the solicitation number is included in the subject line.
Engineering Services

POSTED

5 days ago

DEADLINE

in 21 days
View Details
NAICS: 236220
New
Federal
MARKET SURVEY NOTICE for new ATCT Project at (FLL) Fort Lauderdale- Hollywood International Airport
Solicitation # 697DCK-27-R-FLL01
The Federal Aviation Administration is conducting a market survey for the Progressive Design-Build (PDB) of a new Air Traffic Control Tower (ATCT) and administrative base building at the Fort Lauderdale-Hollywood International Airport (FLL) in Florida. With a total target budget of 85 million dollars, the project is divided into two primary scope areas: Scope Area A, covering the design and construction of the new tower and underground utilities, and Scope Area B, involving the deconstruction of the existing tower and site reconfiguration for parking and amenities. The procurement is structured as a two-phase Firm-Fixed-Price contract, where Phase 1 focuses on validation, preliminary design, and preconstruction services, and Phase 2 encompasses final design, full construction, and commissioning. The FAA will utilize a Tradeoff Source Selection Method, prioritizing non-cost factors such as project past performance, experience with mission-critical high-rise structures, and the proposed PDB management approach over price. Qualified offerors must demonstrate a minimum of 15% self-performance and provide bonding capacity of at least 85 million dollars from a Treasury-listed company. All work must adhere to strict technical standards, including FAA Terminal Facilities Design Standard Version 2.4, International Building Codes, and various NFPA safety standards. The selection process involves a technical evaluation of qualifications, confidential interviews with the top three rated submittals, and a final fairness and reasonableness review of the Phase 1 price proposal.
Commercial and Institutional Building Construction

POSTED

7 days ago

DEADLINE

in about 14 hours
View Details
NAICS: 325992
Federal
Printer Consumables for the Strategic Sourcing for the Acquisition of Various Supplies and Equipment (SAVES) Program
Solicitation # 697DCK-25-R-00368
The Federal Aviation Administration is seeking a single-award, indefinite delivery indefinite quantity (IDIQ) contract for the procurement of over 750 toner and printer consumable items to support the agency-wide Strategic Sourcing for the Acquisition of Various Equipment and Supplies (SAVES) program. This total small business set-aside under NAICS 325992 has a five-year period of performance from February 19, 2027, to February 18, 2032, consisting of one base year and four one-year ordering periods. The contract requires the provision of Original Equipment Manufacturer (OEM) products from approved brands, including Brother, Canon, Dell, Epson, HP, Lexmark, Okidata, and Xerox, with deliveries spanning the 48 contiguous states, the District of Columbia, and non-foreign OCONUS locations. Award will be made to the responsible offeror with the Lowest Priced, Technically Acceptable (LPTA) proposal. Technical acceptability is based on a sequential review of the two lowest-priced compliant proposals, evaluating factors such as logistics plans that ensure a 98 percent on-time delivery rate and a customer service response time of two business hours for 90 percent of requests. Pricing is evaluated based on the total value of the base and all ordering periods, utilizing a model of MSRPs adjusted by proposed annual escalation rates and percentage discounts per brand. Following several modifications, Amendment 0005 extended the proposal due date to November 12, 2026, at 5:00 PM ET and required all offerors to resubmit their proposals in their entirety. Key updates in the final amendment include a reduction in the past experience complexity requirement from 730 to 620 items and the removal of the small business certification submission requirement, as status is now verified via SAM.gov. Proposals must be submitted in three volumes: a Business Proposal, a Technical Proposal with a 12-page limit, and a Price Proposal.
Photographic Film, Paper, Plate, Chemical, and Copy Toner Manufacturing

POSTED

8 days ago

DEADLINE

in 3 days
View Details

Find Active Opportunities Like This

Get AI-powered intelligence on the opportunities still open

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 750+ contractors already using CLEATUS