Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, July 22 at 2:00 PM EDT

Register Free →

CDC ARSR HVAC Replacement

Active
697DCK-26-R-00330Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The Federal Aviation Administration is soliciting proposals for the replacement of two existing HVAC units at the CDC ARSR facility in Brian Head, Utah, under solicitation number 697DCK-26-R-00330. The contract requires the removal and proper disposal of the current HVAC systems, including ducting and controls, and the installation of two new 15-ton York air-cooled self-contained packaged air conditioning units or FAA-approved equivalents, along with all necessary associated components. The acquisition is set aside exclusively for small businesses under NAICS code 238220, with a projected budget between $250,000 and $500,000 and a performance period of approximately 60 calendar days. The FAA plans to award a Firm Fixed Price contract, and all submissions must include both a technical and cost proposal in accordance with the specified requirements. All proposals must be submitted electronically via email to Marc Lemay and Suzanne Huggins no later than 3:00 PM EDT on August 13, 2026, with file sizes not exceeding 10 MB per message and no zipped formats permitted. An optional site visit is scheduled for July 30, 2026, at 10:00 AM at FR 277, Brian Head, UT, but attendance requires advance notice by July 27, 2026, and failure to register will result in cancellation without notice. Questions and requests for information must be submitted in writing via email no later than August 4, 2026, and no telephone inquiries will be accepted. Offerors must be currently registered in SAM.gov and respond to all requirements in full; late or incomplete submissions will not be considered. The FAA will not issue individual notifications of amendments, and offerors are responsible for monitoring the procurement website for updates. This solicitation does not constitute a contractual obligation, and the government will not reimburse any costs incurred in preparing responses.

General Info

Replace two HVAC units at CDC ARSR facility with 15-ton units; small business set-aside; $250K–$500K; 60-day period; firm fixed price; proposals due August 13, 2026.

Agency

Department Of Transportation → 697DCK Regional Acquisitions SvcsView Agency

NAICS

238220 - Plumbing, Heating, and Air-Conditioning ContractorsView NAICS

Place of Performance

Brian Head, UT, 84719, USA

Set-Aside

SBA

Documents

(4)

Wage+Determination+-++UT20260073+05182026.pdf

PDF

CDC+HVAC+SOW.pdf

PDF

697DCK-26-R-00330.pdf

PDF

CDC-D-ARSR-M001.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Transportation → 697DCK Regional Acquisitions Svcs
Contacts2 people available
OfficeFORT WORTH, TX, 76177, USA
Organization / Agency
Department Of Transportation → 697DCK Regional Acquisitions Svcs
View Agency Profile
Office AddressFORT WORTH, TX, 76177, USA
Contacts

Full Description

Show more

The Federal Aviation Administration (FAA), Eastern Acquisitions-AAQ-570, College Park, GA, is issuing Screening Information Request (SIR) Number 697DCK-26-R-00330, CDC ARSR HVAC Replacement, Cedar City UT, as detailed in the Statement of Work (SOW) attached to the Solicitation in accordance with the Acquisition Management System (AMS) 3.2.2.2 Policy as supplemented with additional information included in this notice.



The selected Contractor will remove and properly dispose of the existing two (2) HVAC units and associated ducting, controls, and other related components; and provide and install two (2) new York 15-Ton Air-Cooled Self-Contained Packaged Air Conditioning Units (DSV180C2S5VDA3A00), or FAA approved equal, and all associated components.



The FAA contemplates award of a Firm Fixed Price Contract as a result of this solicitation.


This requirement is set-aside and offered to all small business concerns. 


The NAICS code for this acquisition is 238220Plumbing, Heating, and Air Conditioning Contractors - $19 Million.
The estimated cost magnitude for this project is between $250,000 and $500,000.
Projected Period of Performance for this project is approximately 60 calendar days.

All interested sources should first attempt to download the attached SIR document(s).  If downloading is not possible, all requests for copies of the SIR document(s) must be made in writing to the attention of Marc Lemay, Contracting Officer (AAQ-570), via e-mail at Marc.Lemay@faa.gov and Suzanne.T-CTR.Huggins@faa.gov


NOTE: Electronic submission is preferred. The electronic submission should be in either Microsoft WORD format or portable document format (PDF), not in a zipped format. Please note that the FAA e-mail server restricts file size to 10MB per email message, therefore, responses may have to be submitted in more than one e-mail to be received.

There is an optional site visit on July 30, 2026, at 10:00amThis is the only site visit that will be scheduled for the anticipated project; and no individual site visits will be permitted. 


Meeting point: FR 277 (Blowhard Road), Brian Head, UT 84719  |  37° 35' 35.5" N, 112° 51' 49.2" W


To attend the site visit, advanced notice via Marc.Lemay@faa.gov and Suzanne.T-CTR.Huggins@faa.gov is required.  Note: The site visit will be canceled without notice, if no notices of attendance are received by July 27, 2026, at 3:00pm ET.



All Questions/Requests for Information (RFI) must be emailed to Marc.Lemay@faa.gov and Suzanne.T-CTR.Huggins@faa.gov no later than August 4, 2026; 2:00pm Eastern Daylight Time (EDT) to allow sufficient time to respond.   TELEPHONE INQUIRIES WILL NOT BE ACCEPTED.



No questions concerning the project will be answered during the site visit unless the Contracting Officer or the Contracting Officer's Representative is present at the site visit: however, no changes are made to the SIR unless a written amendment is issued. The FAA assumes no responsibility for any conclusions or interpretations made by the contractor based on the information received by any means other than in writing from the Contracting Officer. The FAA does not assume responsibility for any understanding reached or representation made concerning conditions, which can affect the work, by any of its officers or agents before the execution of this contract, unless that understanding, or representation is expressly stated in the contract.
 


Potential offerors should note that the FAA reserves the right to communicate with one or more offerors at any time during the solicitation process. Proposals must be received by email no later than August 13, 2026; 3:00 PM EDT to Marc.Lemay@faa.gov and Suzanne.T-CTR.Huggins@faa.gov
 


When responding to this Screening Information Request/Request for Proposal (SIR/RFP), each offeror is required to submit a technical proposal AND a cost proposal in accordance with Clause SA18 – Proposal Content outlined in Section L, page(s) 58-59 of the Screening Information Request (SIR).



In accordance with SIR Section L provision 3.2.2.3-14 entitled, "Late Submissions, Modifications, and Withdrawals of Submittals," any proposal received after the due time and date of 3:00p.m. ET, August 13, 2026, will not be considered.  In addition, if all requested information is not furnished in the offeror's proposal, the offeror's proposal may be determined to be non-responsive and ineligible for consideration for contract award.

To be considered for award of this project, the contractor must be currently registered in the System for Award Management (SAM) database (website:  www.sam.gov).

This SIR/RFQ is not to be construed as a contract or a commitment of any kind.  The Government shall not be liable for payment of any costs attributed to the preparation and submission of requested proposal documentation.  No individual notification of any amendments will be provided.  It is the Offeror’s responsibility to visit this website frequently for updates on this procurement.  Acquisition Management System (AMS) applies to FAA in place of the Federal Acquisition Regulation (FAR) and various other provisions of Federal acquisition law.

Similar Contracts

Same NAICS industry code

NAICS: 238220
New
SLED
HVAC Repair Services, System Diagnostics, and Preventive Maintenance Austin State Supported Living CenterThe Health and Human Services Commission is seeking qualified vendors to provide comprehensive HVAC repair services, system diagnostics, and preventive maintenance for approximately 500 units of equipment at the Austin State Supported Living Center located at 2203 W. 35th Street in Austin, Texas. This solicitation requires bidders to attend at least one of two mandatory on-site visits scheduled for July 21 and July 22, 2026, at 10:00 AM Central Time; failure to attend in person and sign the attendance log will result in disqualification. Vendors must check in with security upon arrival and are encouraged to notify the onsite contact, Thomas Chavez, of their attendance. All participants in pre-bid meetings, including conference calls and webinars, must provide their legal business entity name, representative names and titles, and point of contact email to be included in the official attendance record. Requests for clarification must be submitted by July 23, 2026, with responses and addenda posted by July 27, 2026, and a courtesy review of HUB Subcontracting Plans is due by July 28, 2026. Responses to the solicitation are due by August 7, 2026, at 10:30 AM Central Time, with an anticipated contract start date of September 1, 2026. ADA accommodations can be requested at least 72 hours in advance by contacting the sole point of contact listed in the documentation.
Health and Human Services Commission

POSTED

about 13 hours ago

DEADLINE

in 20 days
View Details
NAICS: 238220
New
International
LLM26025 - Saskatchewan Polytechnic Moose Jaw - Chiller ReplacementThe Government of Saskatchewan, through SaskBuilds and Procurement, is inviting qualified suppliers to submit bids for the replacement of the chiller at Saskatchewan Polytechnic’s Moose Jaw campus under solicitation number 316-2026. The project requires the supply and installation of a new chiller unit, including the removal and proper disposal or recycling of the existing system, salvage of the compressor installed in 2025, restoration of the roof beneath the unit, crane installation of the new chiller onto the roof, and full mechanical, electrical, and controls integration with the building’s existing infrastructure. All work must result in a fully operational HVAC system compliant with project specifications. A non-mandatory Pre-Tender Site Meeting is available for bidders to gain further insight into the site conditions and requirements. Bidders must be registered on the Government Enterprise Management (GEM) system to access competition documents, submit questions, receive updates, and formally submit their bids. The opportunity was posted on July 17, 2026, and responses are due by August 12, 2026. All amendments and communications will be issued exclusively through the GEM portal. For registration or technical assistance, suppliers are directed to the GEM website and may contact Tina Munro at rfxquestions@gov.sk.ca.
SaskBuilds and Procurement

POSTED

about 18 hours ago

DEADLINE

in 25 days
View Details
NAICS: 238220
New
SLED
Volusia County Branch Jail Air Handler-Fire Suppression System Removal, Replacement and UpgradeVolusia County is undertaking a comprehensive, integrated renovation of its Branch Jail facility in Daytona Beach to replace aging and noncompliant building systems that have reached end-of-life. The project involves full replacement of all chilled water air handling units, fire and smoke dampers, the obsolete building automation system, and the fire alarm system, all of which are no longer functional, supported, or code-compliant for a detention environment. The existing HVAC infrastructure, including interconnected ductwork and damper relay panels, is degraded and lacks the ability to isolate smoke events to individual housing pods, posing significant life safety risks. The fire alarm system fails to meet current standards including the Florida Fire Prevention Code, NFPA 72, NFPA 101, and UL 864, and cannot support the required redundant fiber optic loop architecture. All systems will be upgraded simultaneously to modern, UL-rated, corrosion-resistant components with full per-pod smoke isolation and purge capability, integrated into a new, expandable Compass Controls building automation system. Work will be executed while the facility remains fully occupied, requiring strict coordination with security, implementation of fire watch protocols, phased construction, and temporary cooling solutions to maintain operational safety. The County has engaged Above Group Engineering & Consulting as mechanical engineer of record and Dewberry Architects Inc. as architect of record to deliver this high-stakes, single-phase upgrade under solicitation number 26-B-110IF, with proposals due by August 20, 2026.
Corrections

POSTED

about 18 hours ago

DEADLINE

in about 1 month
View Details

More opportunities from Department Of Transportation → 697DCK Regional Acquisitions Svcs

Same awarding agency

NAICS: 541380
New
Federal
Materials Compatibility Test and Evaluation Services in support of Piston Aviation Fuels Initiative (PAFI) and Eliminate Aviation Gasoline Lead Emissions (EAGLE) programsThe Federal Aviation Administration is seeking qualified contractors to provide materials compatibility laboratory testing and evaluation services in support of the Piston Aviation Fuels Initiative and Eliminate Aviation Gasoline Lead Emissions programs, with the work to be performed at locations within the Continental United States under a 36-month period of performance extending from July 1, 2026, to June 30, 2028. The solicitation, designated 697DCK-26-R-00186, is open to the full and open market under NAICS code 541380 with a size standard of $19.0 million, and anticipates awarding a hybrid contract combining Firm Fixed Price for non-severable testing services and Labor Hours for severable research services. Proposals must include a Technical Proposal and a Business Proposal, addressing mandatory pass/fail gates: at least three relevant projects completed in the past five years, two independently submitted Customer Satisfaction Surveys rated Satisfactory or higher, and complete pricing for all Contract Line Item Numbers as outlined in the Pricing Template. The solicitation incorporates by reference numerous AMS clauses governing organizational conflicts of interest, illegal activity recovery, order of precedence, subcontractor responsibilities, payment procedures, and termination rights, with all terms subject to the Acquisition Management System rather than the FAR. The Materials Test Matrix, defined in the Statement of Work, dictates required testing protocols for fuel-wetted metallic and non-metallic materials, distribution hoses, linings, filters, and specific test rigs such as RTP-004 and RTP-005, with samples subject to hazardous materials regulations and fuel stored only in FAA-approved sealed containers. All deliverables, including draft and final reports, must be submitted electronically in specified formats within strict timelines—drafts within 30 days of testing completion and final versions within 20 days of FAA comments—and must be properly marked with contract number, contractor details, and delivery status. The Government will award a single contract based on the Lowest Priced, Technically Acceptable method, and failure to submit any required documentation, including SAM registration with a valid UEI, past performance surveys, or properly completed pricing sheets, will result in rejection. Proposals must be submitted by the final deadline of July 31, 2026, at 1500 hrs ET, with all amendments posted publicly and offerors responsible for monitoring updates. The Contracting Officer, Richard Palsgrove, holds sole
Testing Laboratories and Services

POSTED

about 22 hours ago

DEADLINE

in 13 days
View Details
NAICS: 561621
New
Federal
Fire Alarm System, Sprinkler System and Fire Pump Testing and Inspection services at Mineta San Jose International Airport, Air Traffic Control Tower (ATCT)The Federal Aviation Administration is soliciting proposals for annual testing and inspection services of the Fire Alarm System, Sprinkler System, and Fire Pump at the San Jose Air Traffic Control Tower located at 275 Martin Ave., Santa Clara, CA 95050. This procurement, identified as Solicitation Number 697DCK-26-R-00147, is a Firm-Fixed-Price contract under NAICS code 561621 and will be awarded using a lowest priced, technically acceptable (LPTA) methodology. The requirement is detailed in the Statement of Work, which mandates compliance with NFPA 13, NFPA 20, and NFPA 25 standards for system inspections, including valve tests, drain testing, alarm signal verification, and visual evaluations of components. Deliverables include advance notification letters, posted signage, cause and effect matrices, device address lists, and final reports stamped by a NICET Level III technician. The base performance period runs from August 1, 2026, to July 31, 2027, with up to three option years extending through July 31, 2031, for a maximum contract duration of 66 months, subject to government discretion and written notice. All proposals must be submitted electronically by 5:00 p.m. Eastern Time on July 20, 2026, and must include one complete electronic copy adhering to the structure outlined in Section L, including a signed offer form, business proposal, and completed representations and certifications. Offerors must be registered in the System for Award Management with a valid Unique Entity Identifier and must certify compliance with numerous federal requirements including the Buy American Act, prohibition against inverted domestic corporations, and disclosure of AI usage in proposal preparation. Pricing must be submitted for each Contract Line Item with no material imbalances, or the offer will be rejected. Site visits are optional and scheduled for July 8, 2026, with attendance limited to two representatives per company and requires registration by July 7, 2026. All communications during solicitation must be conducted via email to Anna F. Glover at anna.f.glover@faa.gov; phone calls are prohibited. Upon award, contractors must comply with FAA facility security protocols, including export control reviews for foreign nationals, use of the VAP system for quarterly roster updates, adherence to photography restrictions per FAA Order 1600.
Security Systems Services (except Locksmiths)

POSTED

about 22 hours ago

DEADLINE

in 10 days
View Details
NAICS: 238320
New
Federal
Refurbish/Repaint Antenna TowersThe solicitation 697DCK-26-R-00351 seeks a small business contractor to refurbish and repaint three 75-foot steel antenna towers located in Shelton, Connecticut, under a Firm-Fixed Price contract with a total performance period of 90 calendar days. The work involves surface preparation to SSPC-SP 2, SSPC-SP 3, and SSPC-SP 11 standards, removal of hazardous materials including lead-based paint, chromium, cadmium, and assumed PCBs, and application of a specified coating system using Tnemec products in defined thicknesses and colors. Extensive environmental and safety compliance is mandated, requiring a site-specific Health and Safety Plan, OSHA and EPA compliance, Class 3P containment, hazardous waste manifests, and disposal at approved facilities in accordance with Connecticut DEEP and federal regulations. All debris must be removed daily and the site left clean upon completion. Additional scope includes recoating the ladder-mounting areas of an existing MSA Dynaglide system, sealing concrete foundations, replacing ground connections with hot-dip galvanized ASTM A325 bolts, and installing a new 2.5’x2.5’ steel plate on each tower platform with re-drilled bolt holes. The contractor must protect underground communication cables and review as-built drawings to avoid impacts on existing equipment. A contract option exists to coat a separate 200-foot lattice tower, requiring separate line-item pricing in the base bid. Performance bonding is mandatory for proposals exceeding $150,000, and the solicitation has clarified that this threshold supersedes prior conflicting information; both performance and payment bonds at 100% of the contract value are required. All proposals must include a signed offer form, cover letter affirming no exceptions to contract terms, complete price proposal aligned with the Statements of Work and Davis-Bacon wage rates, Section K representations, and a certificate of liability insurance. The technical proposal must demonstrate a thorough understanding of the scope with a detailed approach and schedule, while past performance must prove at least five years of experience in hazardous material abatement and two similar projects completed in the last five years. Proposals are evaluated on a Lowest Price Technically Acceptable basis, requiring all factors to be rated acceptable. Submission is exclusively via email to the Contracting Officer by noon Eastern Time on July 20, 2026. Contractors must comply with strict security protocols, including background checks for all personnel accessing FAA
Painting and Wall Covering Contractors

POSTED

2 days ago

DEADLINE

in 2 days
View Details
NAICS: 238150
New
Federal
The Federal Aviation Administration (FAA) intends to establish a Qualified Vendors List (QVL) for Cab Glass repair and/or replacement in various US locations.The Federal Aviation Administration (FAA) is establishing a Qualified Vendors List (QVL) for the repair and replacement of glass window units in Airport Traffic Control Tower (ATCT) cabs and base buildings across the contiguous United States, under solicitation 697DCK-26-R-00219. This initiative, originally issued as a small business set-aside on June 15, 2026, has been amended to open full and open competition with a new proposal deadline of July 29, 2026, at 12:00 p.m. Eastern Time. The QVL is divided into three geographic service areas—Western, Central, and Eastern—and vendors may apply to one or all areas. While the estimated total value over five years is $10 million, this figure is only an estimate with no dollar cap per individual order, which will be issued as Firm-Fixed Price (FFP) task orders negotiated on a project-by-project basis. The FAA retains the right to make direct awards if deemed in its best interest, and vendors on the QVL will be evaluated annually for performance and responsiveness. Proposals must strictly adhere to a 20-page limit, excluding supporting documents such as Past Performance Questionnaires, bank letters, and bonding company letters, with elaborate submissions discouraged to avoid perceptions of non-cost-consciousness. Evaluation is based on four non-weighted factors: Corporate Experience, Past Performance, Plan of Execution, and Key Personnel. For Corporate Experience, applicants must submit five relevant projects involving glass or glazing installations valued over $40,000 with at least 120 square feet of glass, completed or nearly complete within the past five years, performed on ATCTs or commercial high-rises above 60 feet AGL. Past Performance requires signed Evaluation Data Forms from clients addressing quality, schedule, cost control, and technical compliance, with the FAA permitted to verify information through CPARS or direct contact. The Plan of Execution demands detailed descriptions of order management, quality control processes (including applicable certifications), safety management (including EMR, DART, and TCR rates over five years), risk mitigation strategies, and capacity to handle multiple simultaneous orders. Key Personnel requirements include a Project Manager with ten years of experience and a Project Foreman certified under AGMT or able to obtain certification prior to award, along with resumes and written acknowledgment of on-site supervision. Offerors must be registered in SAM with a UEI, comply with
Glass and Glazing Contractors

POSTED

3 days ago

DEADLINE

in 11 days
View Details
NAICS: 561730
Federal
Landscaping and Snow Removal in Windsor Locks, CTThe Federal Aviation Administration is seeking a small business contractor to provide landscaping and snow removal services at the Bradley Air Traffic Control Tower in Windsor Locks, Connecticut, under solicitation 697DCK-26-R-00287. The requirement is set aside entirely for small businesses, with the NAICS code 561730 and a size standard of $9.5 million in annual receipts. The contract is expected to be awarded on a firm-fixed-price basis with a base year running from November 1, 2026, through October 31, 2027, and four optional one-year extensions, making the total potential contract duration five years. Landscaping services cover approximately 120,000 square feet, including grass and paved areas, and require spring cleanup, weed control, mulching, and reseeding from April through September each year. Snow removal services demand response within two hours of three inches of accumulation, with mandatory clearing of six-foot radii around fire hydrants and three-foot radii around sign floodlights, using equipment with a minimum five-ton capacity and seven-foot blade width. All work must adhere to the detailed Statements of Work attached to the solicitation, including specific performance standards and minimum equipment requirements. Offers must be submitted electronically via email to Stephanie Pfeiff at stephanie.pfeiff@faa.gov no later than July 24, 2026, at 3:00 PM EST, with all questions submitted by July 10, 2026, at the same time. Bidders must be registered in the System for Award Management (SAM) with a valid Unique Entity Identifier prior to submission and maintain registration throughout the contract lifecycle. Proposals are evaluated using a lowest-priced, technically acceptable method, with past experience and past performance serving as pass/fail gates: offerors must submit at least three similar contracts completed within the last five years and at least three customer satisfaction surveys from third parties, all received by the deadline with an average rating of “Good” or higher. Contractors must demonstrate key personnel, carry liability insurance meeting FAA standards, and ensure personnel comply with FAA security orders including background checks and export control reviews. Electronic invoicing via the Delphi portal and authentication through www.login.gov is mandatory, and payment will be processed by electronic funds transfer using SAM data. The contractor must also submit a Continuity of Contract Performance Plan within ten days of award, detailing procedures for maintaining operations
Landscaping Services

POSTED

9 days ago

DEADLINE

in 6 days
View Details
NAICS: 561790
Federal
Surface Preparation and Contamination ControlThe contract involves the cleaning and preparation of HVAC piping and equipment surfaces to eliminate oil, grease, and other contaminants before adhesive and insulation are applied, ensuring optimal bonding and performance. This work is critical for maintaining system efficiency and longevity, and must be performed to precise standards to meet technical and safety requirements. The activity is set aside exclusively for small businesses under the SBA's Total Small Business Set-Aside provisions, with the NAICS code 561790 identifying it as other support activities for building operations. The performance location is specified as Farmington, Minnesota, with a zip code of 55024, and the contracting office is the Department of Transportation’s 697DCK Regional Acquisitions Services. The solicitation was posted on July 8, 2026, and responses are due by July 31, 2026, at 7:00 PM Eastern Time. This is a subcontract opportunity, meaning the winning bidder will be engaged by a prime contractor to fulfill the specified surface preparation work. While there is no designated point of contact listed in the provided data, interested parties must submit their proposals through the official SAM.gov portal linked in the posting. Compliance with contamination control protocols and adherence to small business certification requirements are essential for eligibility and award consideration.
Other Services to Buildings and Dwellings

POSTED

10 days ago

DEADLINE

in 13 days
View Details
NAICS: 238290
Federal
Fire-Resistant and Seismic-Compliant Material InstallationThe contract entails the installation of fire-resistant and seismic-qualified adhesives and mastics specifically for HVAC insulation systems, with strict adherence to the International Building Code 2009, ASCE-7 standards for seismic design, and AHRI 640 performance specifications. The work is scoped to ensure material integrity under both high-temperature and earthquake-induced dynamic loads, requiring certified installation techniques and qualified personnel to meet federal safety and resilience benchmarks. The project will be performed in Farmington, Minnesota, with a zip code of 55024, and is structured as a subcontract under a Total Small Business Set-Aside, meaning only small businesses certified by the Small Business Administration are eligible to bid. The solicitation was posted on July 8, 2026, with a firm response deadline of July 31, 2026, at 7:00 PM Eastern Time. The North American Industry Classification System code is 238290, categorizing this as other building equipment contractors, which aligns with specialized mechanical system installations. The contracting agency is the Department of Transportation through its 697DCK Regional Acquisitions Services office, indicating this work supports federal infrastructure projects requiring compliance with rigorous environmental and structural safety codes. All materials and methods must be fully documented and verifiable to meet the technical and regulatory requirements outlined, with performance tied directly to code compliance and long-term system durability.
Other Building Equipment Contractors

POSTED

10 days ago

DEADLINE

in 13 days
View Details