Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

ELECTRODE, ELECTROCARDI

Active
SPE2DS-26-T-310KFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract specification details a disposable adult electrocardiogram electrode with a nominal diameter of 2.000 inches, designed for use with defibrillator/monitor-recorder systems identified by NSNs 6515-01-582-4060 and 6515-01-582-4072. Each electrode features a high-tack foam backing, wet gel conductive medium, and a silver/silver chloride sensor, and is radiolucent for compatibility with imaging procedures. The product is packaged in quantities of five electrodes per package, with sixty packages per case for a total of three hundred electrodes per case. The unit of issue is PG/40 each, and the NSN 6515-01-701-8690 is referenced for procurement. Strict compliance with DLA technical and quality requirements is mandated, as outlined in the DLA Master List, with applicable revisions controlled by solicitation or award date depending on acquisition scale. Packaging must meet DLA standards, and non-accepted supplies must have government identification removed. The requirement is for two packages, with delivery due within twenty days of award, under solicitation SPE2DS-26-T-310K, issued by the Department of Defense through the Medical Supply Chain MD Surg FSF, with performance at Fort Bragg, North Carolina. Bidders must clearly indicate the source and part number being offered, and all responses are subject to the procurement’s deadlines and federal acquisition regulations.

General Info

Disposable ECG electrodes, 2.000 inches, silver/silver chloride, 300 per case, NSN 6515-01-701-8690, DLA compliant, delivery in 20 days.

Agency

Department Of Defense → MEDICAL SUPPLY CHAIN MD SURG FSFView Agency

NAICS

339112 - Surgical and Medical Instrument ManufacturingView NAICS

Place of Performance

BLD A5474 PRATT ST, FORT BRAGG, NC, 28310, US

Set-Aside

NONE

Documents

(1)

SPE2DS-26-T-310K.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → MEDICAL SUPPLY CHAIN MD SURG FSF
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → MEDICAL SUPPLY CHAIN MD SURG FSF
View Agency Profile
Office AddressUS
Contacts
COLIN OWENS
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
ELECTRODE,ELECTROCARDIOGRAPH
ELECTRODE,ELECTROCARDIOGRAPH
DIAMETER 2.000 INCHES NOMINAL; 6515-01-582-4060 AND
6515-01-582-4072 DEFIBRILLATOR/MONITOR-RECORDER SYSTEMS;
ADULT; DISPOSABE; ELECTRODE DISPOSABLE ADULT MONITORING
300S; ADULT MONITORING; DISPOSABLE; RADIOLUCENT;
HIGH-TACK FOAM; GEL TYPE: WET GEL; SENSOR TYPE:
SILVER/SILVER CHLORIDE; REPLACEMENT COMPONENT FOR NSNS
6515-01-582-4072 AND 6515-01-582-4060,
DEFIBRILLATOR/MONITOR-RECORDER SYSTEMS; 5 ELECTRODES
PER PACKAGE, 60 PACKAGES PER CASE FOR A TOTAL OF 300;
ROUND
UNIT OF ISSUE: PG/40 EACH
..
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
..
RD003, COVERED DEFENSE INFORMATION POTENTIALLY APPLIES
..
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
..
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
..
BIDDER: PLEASE SPECIFY SOURCE AND PART
NUMBER BEING SUPPLIED.
ADEQUATE DATA FOR THE NSN/Part Number: 6515-01-701-8690 Quantity: 2 PG Purchase Request: 7017736865QTY: 2 Delivery: 20 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 339112
New
DIBBS
BLADE, LARYNGOSCOPE
Solicitation # SPE2DS-26-T-307H
The contract specifies the procurement of a Miller Size 0 newborn infant laryngoscope blade, a sterile, disposable, fiberoptic device made of stainless steel and designed for use with standard fiberoptic handles. It is regulated by the FDA as a Class II medical device, requiring compliance with labeling, registration, listing, and GMP standards, though a 510(k) clearance is not mandatory. The item must be supplied by Henry Schein, Inc. under part number 8575362 or Dyna Med under part number A22195, and bidders must clearly identify the source and part number being offered. Packaging must conform to commercial standards and Medical Marking Standard No. 1, superseding MIL-STD-129, with each unit sealed in a protective container and shipped in exterior packaging suitable for safe transport at the lowest carrier rate. The NSN is 6515-01-396-2848, with a unit of issue of each (EA), and the contract calls for delivery of one unit within 20 days FOB destination. Inspection and acceptance occur at the delivery point, with no tolerance for quantity variance. All packaging and marking must adhere to MIL-STD-2073-1E, and the solicitation is issued under SPE2DS-26-T-307H with a response deadline of August 10, 2026. The procurement is governed by DLA packaging and quality requirements, and any applicable defense information controls must be observed.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 15 hours ago

DEADLINE

in 5 days
View Details
NAICS: 339112
New
DIBBS
AIRWAY, ORAL
Solicitation # SPE2DS-26-T-307G
The contract specifies the procurement of 4 units of an oral airway device identified by NSN 6515-01-708-4612, described as a Guedel-style, smooth, flexible polyethylene oral airway with a reinforced bite block, designed for single-use applications. The device is color-coded for easy identification, non-sterile, and free from natural rubber latex, available in eight sizes with embossed measurements in millimeters for quick reference. All units must be individually sealed in suitable containers to prevent damage and packed in commercial shipping containers that ensure safe, cost-effective delivery to the designated point of performance in APO, 09126-3865. Marking must comply with Medical Marking Standard No. 1, superseding MIL-STD-129, and bidders must clearly state the source and part number being offered. The procurement falls under the DLA Master List of Technical and Quality Requirements with specific references to RA001, RP001, and RQ011, governing technical compliance, packaging, and removal of government identification from rejected items. The solicitation issued under SPE2DS-26-T-307G has a response deadline of August 10, 2026, with delivery required within 20 days after award, and is sourced through the Department of Defense's Medical Supply Chain for surgical support.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 15 hours ago

DEADLINE

in 5 days
View Details
NAICS: 339112
New
DIBBS
CONTAINER, SHARPS SHUTT
Solicitation # SPE2DS-26-T-309M
The container is a sharps shuttle storage unit designed for safe handling and disposal of medical sharps such as catheters and syringes used during emergency procedures. Constructed from unbreakable polypropylene with a ribbed texture for durability and grip, it features a one-piece red molded polypropylene top that includes a permanent locking mechanism to secure contents after final closure, while a temporary closure ensures containment during active use. The design meets the MMESO standardized joint product requirement and is intended for reliable, high-performance use in clinical environments. The unit is sold individually with the NSN 6515-01-518-8551 and must be supplied with clear identification of source and part number. Compliance is required with DLA technical, quality, and packaging standards, including provisions for removal of government identification from non-accepted supplies and potential handling of covered defense information. The solicitation is issued under contract SPE2DS-26-T-309M by the Department of Defense’s Medical Supply Chain, with a response deadline of August 10, 2026, and a required delivery within 20 days of award to FPO, 96677.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 15 hours ago

DEADLINE

in 5 days
View Details
NAICS: 339112
New
DIBBS
FLASHLIGHT, EYE EXAM
Solicitation # SPE2DS-26-T-306D
The contract is for the procurement of three disposable, self-contained eye examination flashlights with a blue spot beam, identified by NSN 6515-00-185-9482 and purchase request 7017744837, under solicitation SPE2DS-26-T-306D. The item is classified as a medical device regulated by the FDA, requiring verification by the contracting official through EBS referral with detailed manufacturer and bidder information. Each unit must be packaged in a sealed commercial container that protects against damage and must comply with Medical Marking Standard No. 1, which supersedes MIL-STD-129. Exterior shipping containers must ensure safe, cost-effective delivery via common carrier to the designated destination point. The device must be sourced with a specified manufacturer part number and supplier, and bidders must clearly state their source and part number in their submission. Delivery is required within 55 days of contract award, with a firm delivery date of August 4, 2026, and delivery terms are FOB destination. The units must be marked in accordance with Medical Marking Standard No. 1, and packaging must adhere to commercial standards as specified in the procurement document, not MIL-STD-2073-1E despite earlier references. The shipment is destined for APO AP 96260-5479 for U.S. medical material center purposes, with a secondary freight address at Camp Carroll, Korea. The unit of issue is each (EA), quantity is fixed at three with zero variance allowed, and the unit price is $3.00 for a total contract value of $9.00. All technical and quality requirements are drawn from the DLA Master List of Technical and Quality Requirements, and packaging, marking, and delivery procedures are strictly governed by DLA’s medical logistics directives.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 15 hours ago

DEADLINE

in 5 days
View Details
NAICS: 339112
New
DIBBS
TESTER, LEAKAGE, COLONOF
Solicitation # SPE2DS-26-T-309A
The contract pertains to the procurement of a Tester, Leakage, ColonofiberScope, identified by NSN 6515-01-312-0897, with a unit of issue of each. The item is subject to technical and quality requirements referenced in the DLA Master List of Technical and Quality Requirements, with compliance determined by the revision in effect on the solicitation issue or award date depending on acquisition size. Packaging must adhere to DLA standards, and government identification must be removed from non-accepted supplies. Covered defense information requirements apply, and bidders are required to specify the source and part number being offered. The solicitation is for one unit under purchase request 7017735390 with a delivery deadline of 20 days after order. The solicitation number is SPE2DS-26-T-309A, issued on August 4, 2026, with responses due by August 10, 2026. The acquisition falls under NAICS code 339112, is managed by the Department of Defense’s Medical Supply Chain MD Surg FSF, and performance is designated to FPO with a ZIP code of 96616. Primary point of contact is Colin Owens, reachable via email and phone provided.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 15 hours ago

DEADLINE

in 5 days
View Details
NAICS: 339112
New
DIBBS
SUPPORT, BOW
Solicitation # SPE2DS-26-T-306E
The contract specifies the procurement of two aluminum bow supports, each 12 inches nominal in size, designed for use with finger traps and identified by NSN 6515-01-490-5116. These items are intended for medical applications and must comply with all associated technical and quality requirements outlined in the DLA Master List of Technical and Quality Requirements, with applicable references marked by R or I numbers. Packaging and marking must adhere to Medical Marking Standard No. 1, which replaces MIL-STD-129, and each unit must be sealed in a suitable container to prevent damage, with exterior shipping containers meeting commercial standards for safe and cost-effective delivery via common carrier to the designated point of performance in APO, ZIP 96260-5479. The unit of issue is each, and bidders are required to clearly indicate the source and part number being offered. All provisions are governed by the Federal Acquisition Regulation and the DLA Packaging Requirements, and the item must be delivered within 84 days of award. The solicitation, issued under SPE2DS-26-T-306E, was posted on August 4, 2026, with responses due by August 10, 2026, under NAICS code 339112 for medical device manufacturing, and is managed by the Department of Defense’s Medical Supply Chain.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 15 hours ago

DEADLINE

in 5 days
View Details
NAICS: 339112
New
DIBBS
DOPPLER, BLOOD FLOW
Solicitation # SPE2DS-26-T-307Y
The contract pertains to the procurement of a handheld Doppler blood flow device, specifically the Summit Doppler LifeDOP 150 Series equipped with an audio recorder and an 8 MHz vascular pencil probe, designed for non-display vascular assessment and requiring three AAA batteries. The unit is sold individually and must meet stringent technical and quality standards outlined in the DLA Master List of Technical and Quality Requirements, with compliance determined by the revision in effect on the solicitation issue date or award date. The item is regulated by the FDA, necessitating a referral through EBS to a product specialist for confirmation prior to award, including details such as bidder and manufacturer information, part number, and item description. The National Stock Number is 6515-01-734-9276, with a requirement for four units to be delivered within twenty days of award to Hurlburt Field, Florida, under solicitation SPE2DS-26-T-307Y. Bidders are required to clearly specify the source and part number being supplied. The contract falls under NAICS code 339112 and is managed by the Department of Defense’s Medical Supply Chain MD Surg FSF, with a response deadline of August 10, 2026. Covered defense information potentially applies, and all supplies must comply with DLA packaging and government identification removal requirements for non-accepted items.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 15 hours ago

DEADLINE

in 5 days
View Details
NAICS: 339112
New
DIBBS
FORCEPS, INTESTINAL
Solicitation # SPE2DS-26-T-306S
The item is a Meeker intestinal forceps with an overall nominal length of 10.75 inches and a right-angle design, intended for surgical use in intestinal procedures. It is identified by NSN 6515-01-499-5074 and sold in units of one each, with a single unit ordered under purchase request 7017314307. Delivery is required within 20 days after order award. The solicitation, numbered SPE2DS-26-T-306S, was posted on August 4, 2026, with responses due by August 10, 2026, and falls under NAICS code 339112 for surgical and medical instrument manufacturing. The contract is issued by the Department of Defense through the Medical Supply Chain MD Surg FSF, with performance to occur in Hampton, Virginia. The technical specifications are governed by the DLA Master List of Technical and Quality Requirements, referenced by R or I numbers, and must comply with the revision in effect on the solicitation or award date depending on acquisition size. Packaging must adhere to DLA standards, and any non-accepted supplies must have government identification removed prior to return. Bidders are required to clearly state the source and part number being offered. Additionally, the contract is subject to Covered Defense Information requirements, indicating that the item may involve sensitive or controlled data under federal procurement protocols.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 15 hours ago

DEADLINE

in 5 days
View Details
NAICS: 339112
New
DIBBS
DECANTER, BAG, INTRAVENO
Solicitation # SPE2DS-26-T-309U
The contract specifies the procurement of 10-inch disposable intravenous decanter bags made of plastic tubing with a spike, designed for sterile transfer of fluids from a container to a collapsible bag. Each unit features an open spout and protective caps at both ends, individually wrapped to maintain sterility, and is intended for aseptic decanting. The item is sold in packaging units of 50 per PG, with a total order of 2 PG (100 units). The product is regulated by the FDA, and bidders must clearly state the manufacturer, part number, and source—recognized suppliers include Advance Medical Designs, Inc. with part number 10-102 and Medline Industries, LP with part number AMD10102. All items must comply with Medical Marking Standard No. 1, replacing MIL-STD-129, and must be marked accordingly with no government identification removed from non-accepted supplies. Technical and quality requirements are governed by the DLA Master List, with packaging and handling following MIL-STD-2073-1E. Delivery is FOB destination within 20 days, with zero variance allowed in quantity, and inspection and acceptance occur at the destination. The NSN is 6515-01-268-5471, solicitation number is SPE2DS-26-T-309U, and the NAICS code is 339112 for medical device manufacturing under the Department of Defense.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 15 hours ago

DEADLINE

in 5 days
View Details
NAICS: 339112
New
DIBBS
SUPPORT, TRACHEAL TUBE
Solicitation # SPE2DS-26-T-309F
The tracheal tube support is an L-shaped, right-angle stainless steel device engineered to prevent drag and pull on anesthesia tubes, inhalers, and similar breathing circuits, reducing risks such as accidental extubation, unintended tube advancement into a bronchial position, or kinking at the connector. It features slots on both angles to securely accommodate adult and pediatric corrugated anesthesia breathing tubing and can be positioned above or below the operating table headpiece for flexibility in clinical setups, making it suitable for patients in supine, prone, or lateral positions. Available with either four or six tube slots, the device is constructed from durable stainless steel to ensure easy cleaning, disinfection, and long-term reuse in high-demand medical environments. The item is identified by NSN 6515-01-730-7957 and is being procured in a quantity of two units under contract solicitation SPE2DS-26-T-309F, with a required delivery within 20 days of award. The procurement falls under the NAICS code 339112 and is managed by the Department of Defense’s Medical Supply Chain, with packaging, quality, and defense information requirements governed by DLA’s master list and applicable regulatory standards. Bidders must clearly state the source and part number of the supplied item.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 15 hours ago

DEADLINE

in 5 days
View Details
NAICS: 339112
New
DIBBS
BAG, RECLOSABLE
Solicitation # SPE2DS-26-T-310A
The contract specifies the procurement of 5,000 white block reclosable polybags, each measuring 3.0 inches by 4.0 inches and constructed of 2-mil thick, high-clarity, 100 percent virgin polyethylene with a clear body and a white labeling area on the front. Each package contains 1,000 bags, and the unit of issue is a package. All packaging must comply with commercial standards as outlined in the procurement document, with each unit securely sealed in a container designed to prevent damage or breakage. Shipments must be packed in suitable commercial exterior containers that ensure safe and cost-effective delivery by common carriers to the designated point, with export packaging required when necessary. The items must be marked according to Medical Marking Standard No. 1, replacing all references to MIL-STD-129, and copies of this standard are available through DLA Troop Support. The product is subject to technical and quality requirements from the DLA Master List, with applicable revisions determined by the solicitation or award date depending on acquisition size. The NSN is 6515-01-500-5746, with a delivery requirement within 20 days of award under solicitation SPE2DS-26-T-310A, and bidders must identify their source and part number. The contract falls under NAICS code 339112 and is managed by the Department of Defense’s Medical Supply Chain.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 15 hours ago

DEADLINE

in 5 days
View Details
NAICS: 339112
New
DIBBS
TUBING, TRANSDUCER
Solicitation # SPE2DS-26-T-306K
The item is a disposable A-line transducer tubing, 60 inches in length, designed for use with A-line transducers and equipped with a squeeze flush device. It is packaged in units of 20 each, identified by NSN 6515-01-500-7556, and must meet a strict shelf-life requirement of 36 months from the date of manufacture, with no more than five months elapsed between manufacturing and delivery to the government. The product is subject to DLA packaging standards and incorporates technical and quality requirements referenced in the DLA Master List of Technical and Quality Requirements. Removal of government identification from non-accepted supplies is prohibited. The solicitation, issued under SPE2DS-26-T-306K, is for a single packaging unit with a delivery deadline of 20 days after award, and performance is required at Fort Bliss, Texas. The contract is managed by the Department of Defense’s Medical Supply Chain under the NAICS code 339112, with Vernon Stevenson listed as the primary point of contact.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 15 hours ago

DEADLINE

in 5 days
View Details

More opportunities from Department Of Defense → MEDICAL SUPPLY CHAIN MD SURG FSF

Same awarding agency

NAICS: 339113
New
DIBBS
APPLICATOR, DISPOSABLE
Solicitation # SPE2DS-26-T-305Y
The contract specifies the procurement of a disposable 6-inch wooden rod applicator, sterile and packaged two per packet with 100 packets per unit of issue, supplied by approved vendors including REDI PRODUCTS INC, MEDLINE INDUSTRIES, and McKesson Medical-Surgical. The item is regulated by the FDA and must be sourced only from approved manufacturers with specified part numbers. All packaging must comply with commercial standards and the Medical Marking Standard No. 1, replacing MIL-STD-129, with containers designed to prevent damage and ensure safe transport via common carriers at the lowest cost to the designated delivery point. The product must be free of intentional mercury or mercury compounds except in limited exempted uses, and portable devices containing mercury must meet Navy shockproof and secondary containment requirements. Delivery is required within 20 days FOB destination with zero tolerance for quantity variance, and inspection and acceptance occur at the delivery point. Packaging must adhere to MIL-STD-2073-1E, and all items must be properly marked in accordance with DLA’s medical marking guidelines. The solicitation is issued under contract SPE2DS-26-T-305Y with NSN 6515-00-564-8242, and bidders must clearly identify the company and part number being offered. The government requires confirmation of FDA-regulated status via EBS referral, and technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements referenced in the document. This procurement is for a Fleet Prime Vendor item, and the unit of issue is a package (PG).
Surgical Appliance and Supplies Manufacturing

POSTED

about 15 hours ago

DEADLINE

in 5 days
View Details
NAICS: 339113
New
DIBBS
FIRST AID KIT, SMALL CR
Solicitation # SPE2DS-26-T-308T
This contract is for the procurement of a single small craft naval gun response first aid kit, specified by NSN 6545-01-648-2690 and part number P/N 80-0418, manufactured by NORTH AMERICAN RESCUE, LLC. The kit consists of a lightweight, olive drab green outer bag constructed of 500D Cordura solution-dyed nylon, designed for durability and resistance to sand and water, with self-repairing zippers and silent 550 paracord pull loops. It includes two removable internal pouches secured via hook-and-loop fasteners, each equipped with antipilferage seals for security. The contents are two identical Naval Gun Response Aid Pouches (PN 80-0357), one Naval Gun Response Bag (PN 80-0417), and critical medical items including two 34 Fr and two 28 Fr nasopharyngeal airways, two surgical lubricants, two Combat Application Tourniquets, two 6-inch and two abdominal/stump emergency trauma dressings, two HyFin chest seals, two 7.25-inch trauma shears, four SAM Splint II devices, two three-inch elastic wraps, and two permanent markers. All components are required to be delivered within nine months of manufacture, and the kit is not regulated by the FDA. Packaging must comply with Medical Marking Standard No. 1, superseding MIL-STD-129, and adhere to ASTM D3951 if non-hazardous, with DLA technical requirements taking precedence. Shelf life is 60 months and non-extendable. Delivery is FOB destination within 20 days of contract award, with no variance permitted in quantity. The kit must be shipped via traceable means, not parcel post, and delivered to the specified FPO address. All packaging and labeling must conform to DLA’s packaging standards, and the vendor must specify the exact source and part number supplied.
Surgical Appliance and Supplies Manufacturing

POSTED

about 15 hours ago

DEADLINE

in 5 days
View Details
NAICS: 339113
New
DIBBS
BANDAGE, GAUZE
Solicitation # SPE2DS-26-T-309P
The product is a proprietary non-woven cotton blend rolled wrapping gauze known as TACGAUZE, designed for superior fluid absorption and wound wrapping performance. It measures 4.5 inches in width and 120 inches in length, vacuum sealed and sterilized for single-use only. Each unit is identified by NSN 6510-01-676-3176, with a total quantity of two units required under solicitation SPE2DS-26-T-309P. The product must have a shelf life of 60 months, and no more than nine months may have passed from the date of manufacture to the date of delivery to the government. All containers must be marked with the lot number and date of manufacture prefixed by MFD. Packaging must comply with Medical Marking Standard No. 1, replacing all references to MIL-STD-129, and each unit must be sealed in a protective container suitable for safe transit via common carrier to the delivery point in Raleigh, NC, with a 20-day delivery window. The supplier must specify the source and part number being offered, and all packaging and marking must meet DLA’s packaging and medical marking requirements as referenced in applicable technical and quality standards.
Surgical Appliance and Supplies Manufacturing

POSTED

about 15 hours ago

DEADLINE

in 5 days
View Details
NAICS: 334511
New
DIBBS
CABLE, INVASIVE BLOOD P
Solicitation # SPE2DS-26-T-306F
The contract is for a right-angle invasive blood pressure transducer cable with an Edwards connector, intended for use with oval transducers, and is classified under the NSN 6515-01-615-0921. The unit of issue is each, with a quantity of three units required at a unit price of $3.00, totaling $9.00. Delivery is set for 84 days after award, with delivery terms FOB destination, and no variance is permitted in quantity. Inspection and acceptance occur at the destination point. The item is regulated by the FDA, requiring referral to a product specialist in EBS with full bidder and manufacturer details including part numbers. Packaging must comply with the Medical Marking Standard No. 1, which supersedes MIL-STD-129, and each unit must be sealed in commercial-grade containment to prevent damage, with outer shipping containers ensuring safe, low-cost transport to the delivery point. The packaging and marking instructions must strictly adhere to the specified commercial standards outlined in SPE2DS-26-T-306F, and the material is subject to defense information coverage under RD003. The contract references DLA’s technical and quality requirements identified by R and I numbers and mandates that bidders explicitly state the source and part number of the supplied item. The delivery address is APO AE 09227-0000, with freight shipping directed to Kaiserslautern, Germany, and the original required delivery date is August 4, 2026.
Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument Manufacturing

POSTED

about 15 hours ago

DEADLINE

in 5 days
View Details
NAICS: 327992
New
DIBBS
CARABINER, LOCKING, H
Solicitation # SPE2DS-26-T-307N
The contract specifies the procurement of two locking carabiners, part number SK-1013-S from SKEDCO, Inc., designated for use as a replacement component in the Helitag kit for helicopter litter taglines under NSN 6545-01-519-1158. These carabiners are black, locking, and conform to Petzl M17 specifications, and are not regulated by the FDA. The unit of issue is each, with a total quantity of two units to be delivered within twenty days FOB destination, with zero tolerance for quantity variance. The items must be packaged and marked in strict accordance with Medical Marking Standard No. 1, superseding MIL-STD-129, and must be sealed in commercial containers capable of protecting the contents from damage during transit. All packaging and shipping must comply with MIL-STD-2073-1E and ensure safe, cost-effective delivery to Fort Bragg, North Carolina. Bidder must clearly indicate the source and part number supplied, and the acquisition falls under DLA’s technical and quality requirements referenced in the DLA Master List, with applicable defense information safeguards under RD003. The solicitation is issued under contract number SPE2DS-26-T-307N with a response deadline of August 10, 2026, and the contract value is $4.00 total, at $2.00 per unit.
Ground or Treated Mineral and Earth Manufacturing

POSTED

about 15 hours ago

DEADLINE

in 5 days
View Details