Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

ELECTRODE, WELDING

Active
SPE8E5-26-T-3702Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract specifies the procurement of welding electrodes with a diameter of 0.125 inches and a length of 14 inches, featuring an extruded flux coating and packaged in hermetically sealed 10-pound containers as the unit of issue. The product must comply with the technical and quality requirements outlined in AWS A5.15-90 Revision NR and is governed by DLA’s Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on the acquisition size. Packaging must adhere to MIL-STD-2073-1E and MIL-STD-129, with no special marking required, and palletization must follow DLA packaging standards. The material is identified by NSN 3439-01-060-7479 and is classified as ENIFE-CI-A. The delivery is mandated to be FOB origin within 10 days of the required delivery date of December 19, 2025, with zero variance allowed in quantity. Inspection and acceptance occur at the destination, and the shipment is destined for the SAGAMI STORAGE FACILITY in Sagamihara, Kanagawa, Japan, under RDD 555 with transportation governed by DLA procedural notes. The contract is issued under solicitation SPE8E5-26-T-3702, with a response deadline of August 10, 2026, and the product falls under NAICS code 333992. The point of contact is Ira Hedgepeth of the Department of Defense, and all packaging, marking, and shipping procedures reflect strict compliance with federal and defense standards for hazardous materials and logistics.

General Info

Procure 0.125-inch by 14-inch welding electrodes in 10-lb sealed containers, NSN 3439-01-060-7479, FOB origin, deliver to Japan by Dec 19, 2025.

Agency

Department Of Defense → DLA PACKAGING REQUIREMENTS FOR PROCUREMENT UNIT CONTAINER SHALL BEView Agency

NAICS

333992 - Welding and Soldering Equipment ManufacturingView NAICS

Place of Performance

US

Set-Aside

NONE

Documents

(1)

RFQ SPE8E5-26-T-3702 for DLA Troop Support Construction & Equipment

PDF•rfq

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → DLA PACKAGING REQUIREMENTS FOR PROCUREMENT UNIT CONTAINER SHALL BE
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → DLA PACKAGING REQUIREMENTS FOR PROCUREMENT UNIT CONTAINER SHALL BE
View Agency Profile
Office AddressUS
Contacts
Ira Hedgepeth
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
ELECTRODE,WELDING
ELECTRODE, WELDING
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RD003, COVERED DEFENSE INFORMATION POTENTIALLY APPLIES
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
0.125 IN. DIA., 14 IN. LG.
EXTRUDED FLUX COATING REQUIRED
U/I CO = 10 LB. SEALED
TECH DATA AVAILABILITY:
1 CO = 10 LB
TDP Rev A Gen 1 IAW BASIC NON GOVT STD AWS A5.15-90 REVISION NR DTD PART PIECE NUMBER: CLASS ENIFE-CI-A
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017645960 0001 CO 1.000
NSN/MATERIAL:3439010607479
DELIVERY (IN DAYS):0010
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
SPE8E5-26-T-3702
SECTION B
PR: 7017645960 PRLI: 0001 CONT’D
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:10 CLNG/DRY:1 PRESV MAT:00
WRAP MAT:00 CUSH/DUNN MAT:00 CUSH/DUNN THKNESS:C
UNIT CONT:10 OPI:O
PACK CODE:Q PACKING LEVEL: B
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:00 -00 No special marking
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
UNIT CONTAINER SHALL BE 10 LB HERMETICALLY SEALED CONTAINER.
IP025: PACKAGING, MARKING, AND SHIPPING OF HAZARDOUS MATERIALS
BULK BREAK POINT:
WT5PV1
W6XJ USALRCTR CAMP ZAMA
AWCF SSF SAGAMI STORAGE FACILITY
BLDG 137 S1 8TH STREET
SAGAMIHARA KANAGAWA 2520201
JP
RDD 555 SHIPMENT. TRANSPORTATION SEE DLAD PROC NOTE C19. FIRST DESTINATION TRANSPORTATION SEE DLAD PROC
NOTE C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
WT5PV1
W6XJ USALRCTR CAMP ZAMA
AWCF SSF SAGAMI STORAGE FACILITY
BLDG 137 S1 8TH STREET
SAGAMIHARA KANAGAWA 2520201
JP
MARKFOR
WT5PV1
W6XJ USALRCTR CAMP ZAMA
AWCF SSF SAGAMI STORAGE FACILITY
BLDG 137 S1 8TH STREET
SAGAMIHARA KANAGAWA 2520201
JP
M/F: (TCN) WT5PV153500128
RDD: 555
PROJ: TP 2
SUPP ADD: W9046W SIG: C
FOR GOVERNMENT USE ONLY: (IPD) 05
DIC: A01 DIST: V ADV: FC: Z9
SPE8E5-26-T-3702
SECTION B
PR: 7017645960 PRLI: 0001 CONT’D
Need Ship Date:00/00/0000 Original Required Delivery Date:12/19/2025
SPE8E5-26-T-3702 NSN/Part Number: 3439-01-060-7479 Quantity: 1 CO Purchase Request: 7017645960QTY: 1 Delivery: 10 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 333992
New
DIBBS
SOLDERING STATIONThe contract pertains to the procurement of 290 units of a digital soldering station with part number WE1010NA and NSN 3439-01-521-7022, sourced from CAGE 65LN0 Apex Tool Group, LLC. The unit features a digital LCD display, operates within a temperature range of 200 to 850 degrees Fahrenheit, includes a USB port, and draws 85 watts at 120VAC, with dimensions of 5.91 inches in length, 4.72 inches in width, and 3.86 inches in height. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date or award date depending on acquisition size. Packaging must comply with DLA standards, and government identification must be removed from any non-accepted supplies. The product is designated as an exact match per the purchase order text, meaning only this specific part number is acceptable. Delivery is required within 60 days of award, and the solicitation number is SPE8E5-26-Q-0359 with a response deadline of August 11, 2026. The contract is issued by the Department of Defense through the DDSP New Cumberland Facility, and inquiries should be directed to Brandon Wicker at the provided contact information. This item has no shelf life requirement and may be subject to Covered Defense Information provisions.
DDSP NEW CUMBERLAND FACILITY

POSTED

1 day ago

DEADLINE

in 13 days
View Details
NAICS: 333992
New
DIBBS
ELECTRODE, WELDINGThe contract is for welding electrodes, specified as 3/32 inch in diameter and 12 inches in length, with a unit of issue of 10 pounds per CO, totaling one CO. The material is governed by technical and quality requirements referenced in the DLA Master List of Technical and Quality Requirements, specifically TDP Rev A Gen 1 compliant with AWS A5.15-90 and QAP-127. Packaging must adhere to MIL-STD-2073-1E and MIL-STD-129, with special marking code 00 indicating no additional marking requirements. The product is subject to DLA packaging and hazardous materials shipping regulations, including IP025, and must be palletized per RP001. The delivery point is FOB origin with a strict 10-day delivery timeline, and inspection and acceptance occur at the destination. The material is to be shipped to the SAGAMI STORAGE FACILITY in Japan, with a required delivery date of December 23, 2025. The NSN is 3439-00-262-2742, under contract SPE8E6-26-T-3902, and the solicitation closed on August 10, 2026. All shipments must comply with DLA procedural notes C19 and C20 for transportation and first destination handling, and the point of contact for inquiries is Brett Scull.
Defense Logistics Agency

POSTED

1 day ago

DEADLINE

in 12 days
View Details
NAICS: 333992
New
Federal
10-Micron Filtration System Supply & IntegrationThe contract solicits the supply and installation of 10-micron inline filtration systems equipped with isolation valves for oil and coolant lines to ensure consistent fluid purity within operational environments. This effort is focused on maintaining the integrity and longevity of critical fluid systems by reducing contamination risks, with all equipment to be integrated directly into existing lines at the designated place of performance. The scope requires precise engineering and installation to meet rigorous performance standards, ensuring seamless compatibility and reliability under operational conditions. This is a total small business set-aside under the SBA program, classified under NAICS code 333992, and issued by the Department of Defense throughFA4528 5 Cons. All bids must be submitted by the deadline of July 30, 2026, at 4:00 PM, and the work must be performed at Minot Air Force Base, with ZIP code 58704. The solicitation is structured as a subcontract and is only open to small businesses eligible under federal set-aside guidelines, with no information provided regarding a specific point of contact or additional documentation beyond the public posting link.
FA4528 5 Cons

POSTED

1 day ago

DEADLINE

in about 22 hours
View Details
NAICS: 333992
New
Federal
Launch Interface SupplyThe contract seeks the supply of a single launch interface system designed to deploy drone targets with full mechanical and electrical compatibility with existing drone and ground control station systems. This is a subcontract under a Small Business Set Aside, specifically reserved for small businesses as defined by the SBA, and falls under NAICS code 333992 for other miscellaneous manufacturing. The opportunity was posted on July 28, 2026, with responses required by 5:00 PM on August 12, 2026. Performance is expected to be conducted at a location with a zip code of 32542, and the contracting agency is the Department of Defense under the office designation FA2823 Aftc Pzio. No point of contact information or specific city or state details are provided beyond the zip code, and the solicitation number is not assigned. The contract is accessible online through the SAM.gov platform via the provided UI link.
FA2823 Aftc Pzio

POSTED

1 day ago

DEADLINE

in 14 days
View Details
NAICS: 333992
New
Federal
Crossed-Roller Bearing Linear Stages (2 in. Travel)The contract involves the supply of precision linear translation stages featuring crossed-roller bearings and solid platforms, designed for high-accuracy optical or mechanical alignment applications. These stages must meet stringent technical specifications and include full material traceability to ensure reliability and performance in demanding environments. The required units offer a travel range of two inches, tailored for applications where micrometer-level precision and stability are critical. The solicitation is classified as a subcontract under NAICS code 333992, issued by Argonne National Laboratory, a Department of Energy contractor, with a response deadline of July 30, 2026 at 10:00 PM. Performance of the contract will take place in Lemont, Illinois, with a ZIP code of 60439. The posting date was July 28, 2026, indicating a short turnaround window for submissions, and the work is intended to support federal research and development initiatives under the DOE’s oversight.
Argonne National Labor - DOE Contractor

POSTED

1 day ago

DEADLINE

in 1 day
View Details
NAICS: 333992
New
Federal
ROD, WELDINGThis contract pertains to the procurement of welding rods classified as SPECIAL EMPHASIS material (Level I) for use in critical shipboard systems, where failure could lead to catastrophic consequences including loss of life, ship damage, or system failure. The material must comply strictly with MIL-I-23413 and its Interim Change 6, encompassing detailed requirements for design, composition, and testing including alloy identity verification, liquid penetrant testing, and certification of mechanical and chemical properties. Traceability is mandatory from raw material through final delivery, requiring unique heat-lot markings on containers and complete documentation linking each unit to its certified test results. The contractor must maintain a quality system aligned with ISO-9001, ISO-10012, and ISO/IEC 17025, or alternatively MIL-I-45208 and MIL-STD-45662, and must submit documented quality procedures prior to production. All certifications must be signed, unqualified, and free of disclaimers with no transcription permitted. Delivery is governed by a strict 365-day schedule with mandatory submission of certification data through the Wide Area WorkFlow (WAWF) system at least 20 days prior to shipment, followed by acceptance review by Portsmouth Naval Shipyard prior to any material transport. The contract prohibits shipment until formal acceptance is granted, and requires precise WAWF routing with designated government points of contact and email notification. Alloy identity test methods must be submitted for Navy approval before any testing begins and all sub-suppliers must be vetted and audited by the prime contractor. The product must be mercury-free, marked appropriately, and packaged per MIL-STD-2073. The contract is issued under emergency acquisition flexibilities, with a total small business set-aside, and is subject to Buy American Act requirements. Final inspection is 100% for traceability, certification completeness, and compliance, and all waivers or deviations—whether critical, major, or minor—must be formally requested and approved via the Electronic Contractor Data Submission system. The contractor is prohibited from applying material designators to non-fastener components and must adhere to strict control procedures for government-furnished equipment and proprietary design changes through formal Engineering Change Proposals.
Navsup Weapon Systems Support Mech

POSTED

1 day ago

DEADLINE

in 14 days
View Details
NAICS: 333992
New
Federal
Supply of Ancillary Equipment for FE-SEM SystemThe contract calls for the supply of NRTL-certified auxiliary components essential for the stable operation of a field emission scanning electron microscope system, specifically including a chiller, air compressor, and uninterruptible power supply. These components must meet stringent environmental and electrical requirements to ensure the precision and reliability of the FE-SEM system under operational conditions. All equipment must be certified to recognized safety standards and delivered in full compliance with technical specifications to support continuous, high-performance microscopy operations. This is a subcontract issued by the National Energy Technology Laboratory under the U.S. Department of Energy, with a solicitation posted on July 28, 2026, and a response deadline of August 5, 2026. The NAICS code 333992 indicates the procurement is for other commercial and service machinery manufacturing, aligning with the specialized nature of the ancillary equipment. Performance of the work is not tied to a specific physical location in the provided data, and no set-aside provisions are specified, meaning the opportunity is open to all qualified vendors without preference for small businesses or other categories. The solicitation is managed through FedConnect, and interested parties must submit proposals before the deadline to be considered.
National Energy Technology Lab

POSTED

1 day ago

DEADLINE

in 7 days
View Details
NAICS: 333992
New
SLED
Optional Valve Insertion Equipment SupplyDekalb County Government is seeking a subcontractor to supply specialized tools for the installation of quick insert valves under pressure, encompassing hot tapping and sealing equipment necessary for pipeline maintenance and repair operations without system shutdown. The solicitation targets vendors capable of delivering certified, industry-standard equipment designed for safe and efficient valve insertion in live pressure environments, ensuring compliance with operational safety and performance benchmarks. The opportunity is classified under NAICS code 333992, indicating it falls within the miscellaneous manufacturing sector, and is open for bid submission until August 27, 2026, with no set-aside provisions specified. While no point of contact or detailed performance location is provided, the contract will likely support infrastructure projects within Georgia, and interested parties must access the official portal via the provided link for full submission guidelines and technical requirements.
Dekalb County Government

POSTED

2 days ago

DEADLINE

in 29 days
View Details
NAICS: 333992
New
Federal
Solvac Bi-Solvent Cleaning System Assembly & IntegrationThe contract involves the on-site assembly and integration of a 3-stage Solvac bi-solvent ultrasonic cleaning system paired with Flexitrac modular automation, requiring comprehensive mechanical and electrical setup, calibration, and precise alignment to ensure full operational functionality. This work must be completed at the designated location in Crane, Indiana, with all components delivered, installed, and tested to meet performance specifications in a controlled industrial environment. The scope encompasses both the physical construction of the system and its seamless integration with the automation platform to enable efficient, automated cleaning cycles. The contract is classified as a subcontract under NAICS code 333992, issued by the Naval Surface Warfare Center Crane under the Department of Defense, with a response deadline of August 3, 2026. All activities must be performed in compliance with federal acquisition regulations and defense industry standards, and the successful bidder is responsible for coordinating logistics, personnel, and equipment to meet stringent timelines. The placement of performance is fixed at Crane, Indiana, and no alternative locations are permitted, requiring the contractor to manage all on-site resources and ensure minimal disruption to existing operations during installation and commissioning.
Nswc Crane

POSTED

2 days ago

DEADLINE

in 5 days
View Details
NAICS: 333992
New
Federal
Supply of Multiprocess Welder (XMT400 ArcReach)The contract entails the supply and delivery of five Miller Multiprocess Welders, model P/N 907865004, designed to deliver a configurable output range of 15 to 425 amps and compatible with carbon electrodes up to 5/16 inch in diameter. These welders, identified in the solicitation as XMT400 ArcReach units, are intended for military use and must meet specified technical standards for performance and reliability. The procurement is structured as a subcontract under a Total Small Business Set-Aside designation, exclusive to small businesses as defined by the Small Business Administration, with the NAICS code 333992 identifying it within the manufacturing sector for other general purpose machinery. The opportunity was posted on July 27, 2026, with a response deadline of July 31, 2026, at 10:00 PM Eastern Time, and the contracting activity is managed by DLA Maritime - Pearl Harbor under the Department of Defense, although specific performance location and point of contact details are not provided in the metadata.
DLA Maritime - Pearl Harbor

POSTED

2 days ago

DEADLINE

in 2 days
View Details
NAICS: 333992
New
Federal
Supply of Cable Extension Heater (ArcReach)The contract involves the supply and delivery of nine Miller Cable Extension Heaters with part number 301451, each configured with side-connect air-cooled cables or quick wraps, designed for seamless integration with up to six thermocouple sensors to provide real-time temperature feedback. These heaters are essential for precise thermal control in specialized applications, and the requirement emphasizes full operational compatibility between the heating units and the sensor network. The solicitation is structured as a subcontract under a Total Small Business Set-Aside, designated under NAICS code 333992, ensuring eligibility is restricted to small business concerns as defined by the SBA. The offering is managed by DLA Maritime - Pearl Harbor on behalf of the Department of Defense, with a posted date of July 27, 2026, and a response deadline of July 31, 2026, at 10:00 PM. The place of performance and exact delivery location are not specified, indicating flexibility in logistics while maintaining adherence to federal defense procurement standards. All proposals must comply with technical specifications for integration, thermal accuracy, and mechanical compatibility, and bidders must be certified small businesses capable of fulfilling the full scope without subcontracting beyond allowable limits.
DLA Maritime - Pearl Harbor

POSTED

2 days ago

DEADLINE

in 2 days
View Details
NAICS: 333992
New
Federal
ARCREACH, CBLE & WELDER, XMT 400This solicitation, numbered SPMYM4-26-Q-3597, is a strict Brand Name Only acquisition for the Miller Brand Name XMT 400 ArcReach, Cable & Welder, and no substitutions or alternate products will be accepted under any circumstance. Offerors must submit their quotation along with the required technical data sheet, if applicable, via email to the designated Contracting Specialist by the deadline of July 31, 2026, at 10:00 PM Hawaii Standard Time. In addition to the quotation, vendors must complete specific designated fields on Pages 1 and 3, and Pages 21 through 23 of the solicitation document. If Standard Form SF-1449 is not used, a written statement affirming full acceptance of all terms, conditions, and provisions must be included. Failure to comply with any submission requirement will result in the quotation being deemed non-responsive and excluded from consideration. Quotations must be firm-fixed-price, representing the total cost for all materials, labor, packaging, and delivery without any room for adjustment after award. Vendors are required to unconditionally accept the government’s purchase order at the quoted price, and any attempt to modify terms or pricing after award will be treated as non-acceptance. The original equipment manufacturer, brand name, part number, and country of origin must be clearly identified, with proof of authorized distribution or OEM certification potentially required to validate authenticity and warranty. The solicitation is a Total Small Business Set-Aside under NAICS code 333992, and evaluations will be based on technical acceptability, delivery, and price. All inquiries must be directed to the Contracting Specialist via email, and failure to meet any condition will jeopardize eligibility for award.
DLA Maritime - Pearl Harbor

POSTED

2 days ago

DEADLINE

in 2 days
View Details