34--ELECTRODE,WELDING

The contract involves the procurement of 1,948 containers of welding electrodes, each container weighing 10 pounds, with each electrode measuring 3/32 inch in diameter and 14 inches in length. All units must be hermetically sealed in accordance with MIL-W-10430, Class 1A, and packaged per ASTM-D3951-15, with labeling and marking strictly compliant with MIL-STD-129 including barcoding and Military Status Label (MSL). Identification of U.S. military property must adhere to MIL-STD-130N, incorporating Unique Item Identification (UII) and data matrix symbols. Palletization is required per DLA MD00100452 Rev B. Sampling for quality assurance follows MIL-STD-1916 or ASQ H1331, Table 1, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0, respectively; acceptance requires zero non-conformances unless otherwise stated. The product is not subject to shelf life constraints. The contract is a total small business set-aside under NAICS 333992, and suppliers must comply with all technical and quality requirements listed in the DLA Master List of Technical and Quality Requirements. Hazard communication standards require submission of Safety Data Sheets (SDS) compliant with 29 C.F.R. 1910.1200 and GHS-aligned hazard labels prior to award, along with employee training on these requirements. Mercury or mercury-containing compounds are prohibited from intentional addition or direct contact with the product except for specified functional uses such as batteries, fluorescent lamps, sensors, or reagents, with portable mercury-containing devices required to be shock-proof and have a secondary containment barrier per NAVSEA 5100-003D. Packaging preservation is contract-defined as “ZZ.” Delivery is required FOB origin to the DDSP New Cumberland Facility in Pennsylvania within 91 days of the actual delivery order, with inspection and acceptance occurring at the destination. The contract is managed under a simplified acquisition method and includes a comprehensive set of FAR clauses covering equal opportunity, trafficking prevention, employment eligibility, sustainable products, cybersecurity safeguarding, changes, subcontracting, and prohibition of unauthorized obligations, with deviations applied to several clauses. Contractors must be registered in SAM and DIB