Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

SOLDERING STATION

Active
SPE8E9-26-T-3218Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract is for the procurement of 15 soldering stations with NSN 3439-01-183-4632, specified as a Type II Style D cylindrical handle, three-wire plug, screwdriver tip-shaped unit rated for 120 volts single-phase operation, featuring a removable tip and a three-digit LED display capable of showing both temperature settings and actual tip temperature with one-degree Fahrenheit or Celsius resolution. The item must comply with DLA packaging requirements and incorporate technical and quality specifications referenced from the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date or award date depending on acquisition size. The soldering station is subject to potential defense information controls under RD003 and must be procured in full competition per applicable military or federal specifications. The solicitation number is SPE8E9-26-T-3218, with a response deadline of August 3, 2026, and a posted date of July 22, 2026. The delivery requirement is 167 days after order award, with the place of performance specified as Tinker AFB, Oklahoma, 73145-8000. The procurement falls under NAICS code 333992 and is managed by the Department of Defense’s Construction & Equipment MRO Service I. Primary point of contact is Matthew Kruc, reachable via email and phone provided in the contract data. The item is not subject to any set-aside classification and is being procured through a fully competitive federal acquisition process.

General Info

Procure 15 Type II Style D soldering stations for Tinker AFB, compliant with DLA specs, full competition, delivery in 167 days.

Agency

Department Of Defense → CONSTRUCTION & EQUIPMENT MRO SVC IView Agency

NAICS

333992 - Welding and Soldering Equipment ManufacturingView NAICS

Place of Performance

3301 F AVE CEN REC BLDG 506 DR 22, TINKER AFB, OK, 73145-8000, US

Set-Aside

NONE

Documents

(1)

SPE8E9-26-T-3218.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → CONSTRUCTION & EQUIPMENT MRO SVC I
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → CONSTRUCTION & EQUIPMENT MRO SVC I
View Agency Profile
Office AddressUS
Contacts
Matthew Kruc
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
SOLDERING STATION
SOLDERING STATION
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
Type II Style D Cylindrical handle type 3 wire plug type screwdriver tip shaped 120 volts removable tip single phase SPECIAL FEATURES THREE DIGIT LED READOUT DISPLAYING TEMPERATURE SETTINGS AND TIP TEMPERATURE WITH A RESOLUTION AND SETABILITY OF 1 DEG F (1 DEG C)
RD003, COVERED DEFENSE INFORMATION POTENTIALLY APPLIES
SPECIFICATIONS OR COMMERCIAL ITEM DESCRIPTIONS
(CIDS) MAY BE OBTAINED FROM THE WEB SITE
http://quicksearch.dla.mil/ http://quicksearch.dla.mil/
THIS NSN IS PROCURED AS FULLY COMPETITIVE IN
ACCORDANCE WITH A MILITARY / FEDERAL
SPECIFICATION/STANDARD. SEE NSN/Part Number: 3439-01-183-4632 Quantity: 15 EA Purchase Request: 7017586224QTY: 15 Delivery: 167 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 333992
New
DIBBS
ELECTRODE, WELDINGThe contract specifies the procurement of welding electrodes conforming to AWS A5.10 ER5356 specifications, with a nominal diameter of 0.030 inches, supplied on 1-pound rolls, packaged horizontally, and designed for direct current reverse polarity shielded arc welding. The item is identified by NSN 3439-00-892-4382 and a unit of issue of RL, with a total quantity of 307 rolls required. The product is classified as a commercial item and is procured under a military specification without shelf life restrictions. Technical and quality requirements are incorporated by reference from the DLA Master List of Technical and Quality Requirements, and packaging must comply with DLA standards. The material must not contain intentionally added mercury or mercury compounds, except for specific exempted uses such as batteries or instruments, and any portable devices containing mercury must meet shock-proof and secondary containment criteria per NAVSEA 5100-003D. All hazardous materials supplied must be accompanied by Safety Data Sheets compliant with OSHA’s revised Hazard Communication Standard, including GHS-aligned labeling, and suppliers are required to submit both SDS and labels for contracting officer approval prior to award. Employee training on the updated hazard communication standards is mandatory. The contract solicitation number is SPE8E5-26-T-3670, issued by DLA Dist San Joaquin, with a response deadline of August 3, 2026, and delivery expected within 167 days after order. The place of performance is Tracy, California, 95304-5000, and the primary point of contact is Ira Hedgepeth.
DLA DIST SAN JOAQUIN

POSTED

about 4 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333992
New
DIBBS
HEATING ATTACHMENT,
Defense Logistics Agency

POSTED

about 4 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333992
New
DIBBS
ELECTRODE, WELDING
DLA DIST SAN JOAQUIN

POSTED

about 4 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333992
New
DIBBS
ELECTRODE, WELDING
DDSP NEW CUMBERLAND FACILITY

POSTED

about 4 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333992
New
DIBBS
WELDING MACHINE, ARC
SAN DIEGO

POSTED

about 4 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333992
New
Federal
BRAZING ALLOY,SILVEThis contract pertains to the procurement of silver brazing alloy designated as QQ-B-654, Class BCuP-5, in rod form, for use in a critical shipboard system where failure could result in catastrophic consequences including loss of life or the vessel itself. The material is classified as Special Emphasis Level I, triggering stringent quality controls, full traceability, and mandatory certification requirements. All supplied material must be accompanied by comprehensive certification reports that verify chemical composition, mechanical properties, and traceability to heat lot numbers, with inspection and acceptance protocols requiring 100% verification of markings and documentation. The contractor must maintain an ISO-9001-compliant quality system or its military equivalent, with documented procedures subject to government audit, and any deviations or waivers require formal approval through the ECDS system. Government Furnished Refined Silver is provided, with specific handling and control protocols for its use. Delivery is structured with a 365-day timeline, and incremental or early deliveries are permitted without cost impact, but no shipment may proceed without prior review and formal acceptance by Portsmouth Naval Shipyard via WAWF, with certification data submitted electronically to designated government points. The solicitation is issued under Emergency Acquisition Flexibilities and requires full compliance with federal, military, and commercial standards, including ANSI/ASQ Z1.4 for sampling, MIL-STD-2073 for packaging, and strict prohibitions on mercury contamination. The contract permits multiple award decisions per CLIN, with no quantity discounts allowed across combined offerings, and prohibits any variation in order quantity beyond a strict -5% tolerance. A detailed Certificate of Compliance must be submitted with each shipment, confirming conformity to all specifications and including traceability to individual items, signed by authorized personnel. The contractor is responsible for qualifying and auditing sub-tier suppliers, ensuring all purchased components meet the same rigorous standards, and must maintain configuration control through Engineering Change Proposals for any modifications affecting form, fit, or function. All documentation, including certifications and quality reports, must be submitted via ECDS or WAWF using mandated formats and contact points, with failure to comply resulting in immediate rejection. The acquisition is subject to Buy American requirements, small business set-aside provisions, and stringent security and distribution restrictions, and the point of contact for inquiries is Amanda L. Bailey at the Navy Supply Systems Command in Mechanicsburg, Pennsylvania.
Navsup Weapon Systems Support Mech

POSTED

about 9 hours ago

DEADLINE

in 26 days
View Details
NAICS: 333992
New
DIBBS
CAP, AIRThis contract, issued by the Defense Logistics Agency under solicitation number SPE8E5-26-T-3638, pertains to the procurement of one unit of material identified by NSN 3433-01-158-0436, with a required delivery within five days of award. The item is to be delivered FOB origin, with no tolerance for quantity variance, and inspected and accepted at the destination. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, which supersede commercial standards such as ASTM D3951. Packaging must comply with MIL-STD-129 and DLA Packaging Requirements, including specific hazardous material handling per FED-STD-313 and TQ requirement IP025 if applicable. Mercury and mercury-containing compounds are strictly prohibited except for defined functional uses such as batteries, fluorescent lights, sensors, or reagents approved by NAVSEA, with additional containment requirements for portable devices. The shipment is to be sent to a designated SSA location in Kaiserslautern, Germany, with transportation governed by DLA procedural notes C19 and C20. The contract includes restrictions on covered defense information and mandates compliance with supplier documentation standards including Source Approval Requests and removal of government identification from non-accepted items. The original required delivery date is June 11, 2025, and the point of contact is Ira Hedgepeth at DLA.
Defense Logistics Agency

POSTED

1 day ago

DEADLINE

in 12 days
View Details
NAICS: 333992
New
DIBBS
CIRCUIT BREAKERThe contract specifies the procurement of three circuit breakers with part number 5925-00-247-8884 under solicitation SPE7M0-26-T-014H, requiring delivery within five days of award to Tobyhanna Army Depot in Pennsylvania. The items must comply with all DLA Master List of Technical and Quality Requirements, which supersede other standards including ASTM D3951, and packaging must adhere to MIL-STD-129 and RP001 guidelines. Packaging must be commercially compliant unless the item is hazardous, in which case it must follow FED-STD-313 and TQ requirement IP025. Sampling and inspection follow MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise stated, and attributes are classified with verification levels or AQLs as defined. The use of Class I ozone-depleting substances is strictly prohibited in manufacturing or testing without written approval from the contracting officer, though this restriction does not apply to commercial items or numbered parts. Delivery is FOB origin with no tolerance for quantity variance, and inspection and acceptance occur at the destination. Shipping must be via the fastest traceable method, excluding parcel post, and must be labeled with the designated markfor and shipping address. The contract requires compliance with all referenced technical standards, and the supplier must ensure full traceability and documentation per government requirements, with a required delivery date of July 21, 2026, and a response deadline of August 3, 2026.
MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

1 day ago

DEADLINE

in 12 days
View Details
NAICS: 333992
New
DIBBS
TIP, SUCTION DEVICE,The contract is for a single unit of a suction device tip with NSN 3439-01-497-0142, procured under solicitation SPE8E6-26-T-3769 by the Defense Logistics Agency for the Department of Defense. Delivery is required within 20 days to Camp Pendleton, California, with FOB destination terms and zero tolerance for quantity variance. The item must comply with MIL-STD-2073-1E packaging standards, including proper marking per MIL-STD-129, and must be palletized according to DLA packaging requirements. Packaging materials and methods must avoid the use of mercury or mercury-containing compounds unless exempted for specific functional applications such as batteries or sensor components, which must be shockproof and double-contained in accordance with NAVSEA 5100-003D. Shipping must be performed by traceable freight methods—parcel post is prohibited—with the freight address designated for the 9th Communication Battalion at Camp Pendleton. The contract incorporates all technical and quality requirements from the DLA Master List of Technical and Quality Requirements identified by R or I numbers, and the packaging and shipping instructions are aligned with hazardous materials handling procedures. The purchase request number is 7017559661, and the required delivery date is July 17, 2026. Point of contact is Brett Scull, with additional government-specific identifiers and tracking codes provided for logistics and compliance purposes.
Defense Logistics Agency

POSTED

1 day ago

DEADLINE

in 12 days
View Details
NAICS: 333992
New
Federal
ELECTRODE,WELDINGThis contract pertains to the procurement of welding electrodes designated as SPECIAL EMPHASIS material (Level I) for critical shipboard systems, where failure could lead to catastrophic consequences including loss of life or vessel. The materials must strictly comply with MIL-E-22200 and MIL-E-22200/3 specifications, and only qualified products listed on the approved Qualified Product List (QPL) are acceptable. All electrodes must be supplied in 10-pound containers with traceable labeling, including unique heat-lot identifiers marked on packaging to ensure full traceability from raw material to final product. Certifications for chemical composition, mechanical properties, and nondestructive testing are mandatory and must be submitted via Wide Area WorkFlow (WAWF) prior to shipment, with documentation routed to Portsmouth Naval Shipyard for review and acceptance before any material can be delivered. The Contractor is required to maintain a certified quality system per ISO-9001, ISO-10012, and ISO/IEC 17025, or alternatively MIL-I-45208 and MIL-STD-45662, subject to government audit at any time. All subcontractor activities must be controlled under the prime contractor’s quality assurance program, with written procedures for supplier evaluation and periodic audits. Material certification documents must be signed, unqualified, and directly correlate to tested batches without transcription or disclaimers. Special marking and packaging rules apply, and mercury or mercury-containing compounds are strictly prohibited. Delivery is governed by a 365-day schedule, with early or incremental shipments permitted at no extra cost, but no variation in quantity beyond -5% is allowed. Waivers or deviations require formal submission via ECDS and approval by the Contracting Officer, with all changes to configuration subject to Engineering Change Proposal (ECP) review. The solicitation is issued under Emergency Acquisition Flexibilities, with responses due by August 5, 2026, and performance governed by strict Navy quality and traceability protocols under Navy Systems Command oversight.
Navsup Weapon Systems Support Mech

POSTED

1 day ago

DEADLINE

in 14 days
View Details
NAICS: 333992
New
Federal
CABLE HEATINGThis solicitation, numbered SPMYM4-26-Q-3580, is a total small business set-aside for cable heating under NAICS code 333992, issued by the Department of Defense through DLA Maritime - Pearl Harbor. The evaluation method is Lowest Price Technically Acceptable, meaning awards will be made to the most economically advantageous offer that meets minimum technical requirements. Vendors must be deemed responsible using PPIRS and in accordance with FAR 9.104. All responses must include the completed HMDRFQINFO form found on pages 20-22 of the solicitation, and bidders must clearly indicate their business size category, whether quoting as a manufacturer or distributor, dealer independence status, and CAGE code. The place of manufacture and country of origin must be specified, with estimated delivery to Pearl Harbor Naval Shipyard to be provided in calendar days ARO. All shipments are subject to FOB Destination terms, with delivery directed to the specified DoDAAC and address at Pearl Harbor, HI. The response deadline is 4:00 PM Eastern Time on July 23, 2026, and questions or inquiries should be directed to Quincey Dillenback or the DLA Distribution customer service team.
DLA Maritime - Pearl Harbor

POSTED

2 days ago

DEADLINE

in about 19 hours
View Details
NAICS: 333992
New
Federal
34--ROD,WELDINGThis contract pertains to the procurement of welding electrodes and related materials designated as SPECIAL EMPHASIS Level I material, critical for use in shipboard systems where failure could result in catastrophic consequences including loss of life or vessel. The items must comply strictly with specification T9074-BC-GIB-010/0200 and its Appendix B, which define requirements for bare and flux-cored welding electrodes and fluxes for low-alloy steel applications, including strict limits on chromium content (max 0.05%), yield strength range of 100ksi to 125ksi, and prohibition of stress relief thermal treatment. Traceability is mandatory through unique heat-lot identifiers on packaging, with certification data required for every test performed and submitted electronically via WAWF to Portsmouth Naval Shipyard prior to shipment. All certifications must be unqualified, signed, and directly linked to the physical material shipped, with rejection criteria for missing, incomplete, or non-compliant documentation. The contract mandates rigorous quality assurance procedures aligned with ISO-9001, ISO-10012, and ISO/IEC 17025, or alternately MIL-I-45208 and MIL-STD-45662, with Government inspection rights at any point including subcontractor facilities. First Article Testing is required, with a FAT report due 180 days after contract award and approval within 90 days of receipt, and final delivery must occur no later than 250 days after contract effective date. Government Source Inspection has been reinstated, and all orders are DO-rated under the Defense Priorities and Allocations System. Contractors must operate a documented quality system subject to audit, maintain full configuration control, and submit Engineering Change Proposals for any modifications. Material traceability must be maintained through all processing stages, with labeling requirements for spooled and cut-length electrodes. All submissions, including certifications and waivers, must be processed through ECDS, and no material may be shipped without prior WAWF acceptance. The solicitation response deadline is August 3, 2026, with Amanda Bailey as the primary point of contact, and the prior Small Business Set-Aside has been dissolved with the AMC code updated from “T” to “G”.
Navsup Weapon Systems Support Mech

POSTED

2 days ago

DEADLINE

in 12 days
View Details

More opportunities from Department Of Defense → CONSTRUCTION & EQUIPMENT MRO SVC I

Same awarding agency

NAICS: 326113
New
DIBBS
PLASTIC SHEETThe contract is for the procurement of 13 shipping units of clear acrylic plastic sheeting measuring 60 inches long by 36 inches wide and 0.750 inches thick, identified by NSN 9330-00-483-3433. The product must meet the technical specifications of MIL-PRF-5425E Revision E dated August 22, 2019, and be sourced from a manufacturer already approved on the Qualified Products List at the time of contract award. The sheeting is classified as a critical application item and must comply with all DLA packaging and quality requirements referenced in the DLA Master List of Technical and Quality Requirements. Mercury and mercury-containing compounds are strictly prohibited from intentional addition or direct contact with the product, except for specific permitted uses such as batteries, fluorescent lighting, instruments, sensors, controls, weapon systems, or chemical reagents approved by NAVSEA; any portable lamps or instruments containing mercury must be shockproof and feature a secondary containment barrier as per NAVSEA 5100-003D. Delivery is required FOB origin within 167 days of contract award, with an original delivery date of December 3, 2026, and a needed ship date of January 18, 2027. The quantity is fixed with zero variance allowed. Packaging must adhere to MIL-STD-2073-1E and DLA’s packaging requirements, avoiding plastic as wrapping, cushioning, or dunnage whenever possible. Marking shall conform to MIL-STD-129 with no special marking code applied. All shipments must be palletized in accordance with DLA standards and sent to the designated delivery address in New Cumberland, Pennsylvania. Inspection and acceptance occur at the destination. The contract is governed under solicitation SPE8E9-26-T-3199, with a response deadline of August 3, 2026, and is issued under NAICS code 326113. Point of contact for inquiries is Matthew Kruc, DLA.
Unlaminated Plastics Film and Sheet (except Packaging) Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333415
New
DIBBS
CARTRIDGE, DEHYDRATORThe contract is for a dehydrator cartridge designed for use with refrigerant 134A, with a required quantity of 612 units to be delivered within 177 days from the contract award date, with delivery point at the origin and inspection and acceptance occurring at the destination. The item is classified as a critical application item with a non-extendable 24-month shelf life under Type I (Code M) requirements, and it must comply strictly with MIL-STD-2073-1E packaging standards, including specified preservation methods, materials, and packing codes. All packaging and marking must adhere to MIL-STD-129 with special marking code 24 indicating open availability for inspection or use, and palletization must follow DLA packaging requirements. Mercury or mercury-containing compounds are strictly prohibited in or on the item except for limited functional uses approved by NAVSEA, and portable devices containing mercury must have shockproof construction and secondary containment. The item is subject to comprehensive technical and quality requirements referenced from the DLA Master List, and covered defense information applies. Export control and hazardous materials shipping regulations must be followed per IP025 and DLAD procedural notes. The delivery destination is specified with a parcel post address in Tracy, California, and the required ship date is July 22, 2026, with the original delivery deadline set for May 12, 2027. The NSN is 4440013984573, and the contract identifies multiple qualified suppliers with their respective part numbers.
Air-Conditioning and Warm Air Heating Equipment and Commercial and Industrial Refrigeration Equipment Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333413
New
DIBBS
FILTER, AIR, ELECTROSTATThis contract specifies the procurement of an electrostatic air filter with NSN 4460013113732 and part number 441076-001, supplied by AIR SYSTEMS COMPONENTS INC, under solicitation SPE8E9-26-T-3219. Six units are required at a unit price of $6.00, with total contract value of $36.00, delivered FOB origin within 167 days from the contract date. All deliveries must comply with MIL-STD-2073-1E packaging standards and MIL-STD-129 marking requirements, with no special marking applicable. Packaging must adhere to DLA’s procurement guidelines and be palletized per RP001, with shipments directed to DLA Distribution Jacksonville at the specified address. The filter is designated as a critical application item and must not contain or come into direct contact with mercury or mercury-containing compounds, except for authorized exceptions such as functional mercury in batteries, fluorescent lamps, sensors, or chemical reagents specified by NAVSEA, with portable mercury-containing devices requiring shockproof construction and a secondary containment barrier per NAVSEA 5100-003D. The solicitation is a total small business set-aside under NAICS code 333413, with responses due by August 3, 2026, and quality and technical requirements are governed by the DLA Master List of Technical and Quality Requirements referenced in RQ and RD identifiers. Inspection and acceptance occur at the destination, with zero variance permitted in quantity, and transportation protocols follow DLAD Proc Notes C19 and C20.
Industrial and Commercial Fan and Blower and Air Purification Equipment Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 12 days
View Details
NAICS: 334610
New
DIBBS
CARTRIDGE, TONERThis contract is for the procurement of toner cartridges identified by NSN 7045-01-643-9438 and part number 70C0HCG, supplied by Lexmark Intl Inc Federal Sales Division, under solicitation SPE8E9-26-T-3236. A total of 93 units are required at a unit price of $93.00, for a total contract value of $8,649.00, with delivery due 31 days after award, no later than December 20, 2026. All items must be delivered FOB origin, with zero variance allowed in quantity, and are subject to inspection and acceptance at the destination. Packaging must comply with MIL-STD-2073-1E, including specific preservation methods, container codes, and marking per MIL-STD-129 with no special marking required. The delivery destination is the DLA Distribution DDSP New Cumberland Facility in Pennsylvania, and transportation protocols are governed by DLAD Proc Notes C19 and C20. The contract incorporates DLA's Master List of Technical and Quality Requirements, with all referenced technical standards being applicable unless otherwise modified by solicitation amendments. Mercury or mercury-containing compounds are strictly prohibited in the toner cartridges or their components, except for functional uses in batteries, fluorescent lamps, sensors, or specialized instruments as defined by NAVSEA, with portable devices containing mercury required to have shockproof construction and a secondary containment barrier. The contract also notes that no approved technical data package is currently available from DLA Troop Support for this NSN, and suppliers are instructed not to request one. Unit of issue is EA, consistent with DoD standards, and the item falls under NAICS code 334610. The contract is subject to Covered Defense Information requirements, and all submissions must adhere to federal procurement protocols through the DLA eProcurement system.
Manufacturing and Reproducing Magnetic and Optical Media

POSTED

about 4 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333415
New
DIBBS
DEHYDRATOR UNIT, NONThe item is a nonreactivating dehydrator unit, also known as a desiccator assembly, measuring 3.630 inches in length, comprised of a cover, screw cap, and connecting tube. The desiccant used must be blue, Type IV, Grade H, conforming to MIL-D-3716 specifications. The procurement is governed by the Defense Logistics Agency’s packaging requirements and is subject to Cybersecurity Maturity Model Certification Level 2 compliance, requiring the vendor to be a certified third-party assessment organization. Technical data associated with this item is controlled under export regulations, either ITAR or EAR, and its disclosure to foreign persons, regardless of location, is strictly prohibited without prior authorization from the U.S. Department of State or Department of Commerce. DFARS 252.225-7048 applies, and access to this data is restricted solely to DLA contractors with approved U.S./Canada Joint Certification Program status, who have completed mandatory training and the DLA export-controlled data questionnaire. The item’s NSN is 4440-00-858-6010, with a quantity of nine units included in Purchase Request 7017585208. Delivery is due within 167 days after award. The solicitation number is SPE8E9-26-T-3207, with a response deadline of August 3, 2026, and the procurement falls under NAICS code 333415. The contracting office is the Department of Defense’s Construction & Equipment MRO Service I, with performance located at Tinker Air Force Base, 73145-8000. Primary point of contact is Matthew Kruc, reachable via email and phone.
Air-Conditioning and Warm Air Heating Equipment and Commercial and Industrial Refrigeration Equipment Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 12 days
View Details
NAICS: 326113
New
DIBBS
PLASTIC SHEETThe contract calls for the procurement of plastic sheets made of cellulose acetate, compliant with specification L-P-504, Type 1, characterized by a clear, high polish finish, with nominal dimensions of 20.000 inches in width, 0.060 inches in thickness, and 50.000 inches in length. Each sheet must be packaged in containers marked with the instruction “STORE FLAT KEEP COOL AND DRY” on at least one side and wherever practicable on two opposite sides. The material is identified by NSN 9330-00-202-3642 and is being procured under solicitation SPE8E9-26-T-3198 for a total quantity of 111 sheets, with a purchase request number of 7017585375 and a delivery deadline of 84 days after order. Packaging and labeling requirements adhere strictly to government standards, including the mandatory removal of any government identification from non-accepted supplies. All sampling and quality verification must follow MIL-STD-1916 or ASQ H1331 Table 1, or an equivalent zero-based sampling plan unless otherwise directed. Critical, major, and minor attributes must be verified at levels VII, IV, and II respectively, or with AQLs of 0.1, 1.0, and 4.0; unspecified attributes are treated as major. The manufacturer may elect either attribute or variable inspection under MIL-STD-1916 unless the contract specifies otherwise. MIL-STD-105/ASQ Z1.4 may determine sample size but acceptance requires zero non-conformances. The product must also comply with MIL-STD-130N for identification marking of U.S. military property. The solicitation was posted on July 22, 2026, with responses due by August 3, 2026, under NAICS code 326113, issued by the Department of Defense under the Construction & Equipment MRO SVC I office, with performance location at Robins AFB, Georgia, and primary point of contact Matthew Kruc.
Unlaminated Plastics Film and Sheet (except Packaging) Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 12 days
View Details
NAICS: 339950
New
DIBBS
PLATE, IDENTIFICATIOHamilton Sundstrand Corporation, identified by CAGE code 99167, is contracted to supply identification plates with part number 745184-7 under solicitation SPE8E9-26-T-3235, with a total quantity of 64 units at a unit price of $64.00, resulting in a total contract value of $4,096.00. The item is designated by NSN 9905-01-672-4912 and must be delivered FOB origin within 167 days of contract award, with the original required delivery date set for March 22, 2027, and a needed ship date of January 18, 2027. Inspection and acceptance both occur at the destination, and no quantity variance is permitted. The supplier must comply with all DLA Master List of Technical and Quality Requirements, which override any conflicting standards, including ASTM D3951. Packaging must adhere to MIL-STD-129 for marking and labeling, and palletization must follow RP001 DLA Packaging Requirements. All packaging must also meet the Unit of Issue and Quantity per Unit Pack as specified in the contract. Delivery is directed to DLA Distribution Depot Hill at Hill AFB, Utah, via the freight shipping address provided, with transportation governed by DLAD Proc Notes C19 and C20. The contract references multiple technical and quality control codes, including RD003 regarding Covered Defense Information, and requires documentation for source approval per RC001. The supplier must also remove government identification from non-accepted supplies per RQ011. All applicable requirements are controlled by the version of the DLA Master List in effect on the solicitation issue date.
Sign Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333310
New
DIBBS
FILTER ELEMENT, AIR CONThis contract is for the procurement of eight air conditioning filter elements with NSN 4130012053774, issued under solicitation SPE8E9-26-T-3213 by the Department of Defense through DLA Troop Support. The supplier must deliver the items FOB origin with no variance in quantity, and inspection and acceptance will occur at the destination. The delivery timeline requires shipment no later than January 18, 2027, with an original required delivery date of November 14, 2026, and a total contract value of $64.00 at $8.00 per unit. Packaging must comply with MIL-STD-2073-1E, including specified preservation methods and unit container codes, and all marking must follow MIL-STD-129K, with MIL-L-61002 requirements waived. Plastics are to be avoided in wrapping, cushioning, or dunnage where possible. The item is subject to strict restrictions on mercury and mercury-containing compounds, which are prohibited unless functionally necessary in specific applications like batteries or instruments, and even then must have dual containment per NAVSEA 5100-003D. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced electronically, and the contract includes controlled information provisions. All shipments must be addressed to the DLA Distribution facility in New Cumberland, Pennsylvania, and transportation instructions are detailed in DLAD procedural notes.
Commercial and Service Industry Machinery Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333998
New
DIBBS
BINDER, LOADThis contract issued by the Defense Logistics Agency under solicitation SPE8E9-26-T-3214 requires the procurement of 508 units of a binder, load item identified by NSN 3990-01-479-0538 and part number 12421708, with a unit price of $508.00 and a total contract value of $258,064.00. Delivery must be completed within 221 days of award, with FOB origin terms, inspection and acceptance occurring at destination, and no quantity variance allowed. The item must be packaged per ASTM D3951, with all labeling and marking strictly following MIL-STD-129, and palletization in compliance with DLA packaging requirements. Technical and quality standards referenced from the DLA Master List of Technical and Quality Requirements take precedence over any general packaging standards. The procurement is set aside for Service-Disabled Veteran-Owned Small Businesses under NAICS code 333998, with the primary point of contact being Matthew Kruc at DLA. The item is designated as a critical application and potentially involves covered defense information. The forging process is specified for manufacturing, and specific approved sources include BAE Systems, W.H. Smith Hardware, AMZ Alabama, Buffers USA, and The Crosby Group. Ship date is March 13, 2027, with original delivery required by April 22, 2027. All shipments must be directed to the DLA Distribution facility in New Cumberland, Pennsylvania, following DLA transportation protocol C19 for freight and C20 for first destination.
All Other Miscellaneous General Purpose Machinery Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 12 days
View Details
NAICS: 331491
New
DIBBS
SHEET, METALThis contract specifies the procurement of aluminum alloy sheet metal with precise technical and quality requirements, including a thickness of 0.063 inches, width of 48 inches, length of 96 inches, and a weight of approximately 28.16 pounds per sheet. The material must conform to alloy 5052 in temper H32 and meet specifications SAE AMS-QQ-A-250/24C, ASTM B666/B666M-20, and ASTM B660-23, with full compliance to the referenced Technical Data Package revisions. All sheets must be supplied in whole-foot lengths only, with no test coupons permitted, and must bear continuous identification markings including the DLA contract delivery order number, NSN, specification revision, alloy and temper, manufacturer’s name, heat and lot number, and exact dimensions. A Certificate of Quality Compliance with mill materials certification is mandatory for every shipment and must be submitted to both the customer and the DLA Troop Support Contracting Officer. Markings must be applied via stamping or stenciling, using waterproof, non-contaminating fluids, and must remain legible under normal handling; adhesive labels are required for small bars, tubes, and shapes under 0.250 inches in nominal OD. Compliance with MIL-STD-129 and MIL-STD-2073-1E packaging standards is required, including Level A preservation per ASTM B660 and special marking instructions where applicable. The Qualified Suppliers List for Distributors (QSLD) is strictly enforced, and only suppliers listed on the QSLD are eligible to respond; any deviation must be explicitly noted and may result in rejection or criminal penalties for unauthorized substitution. Delivery is FOB origin, with no quantity variance allowed, inspection and acceptance occurring at destination, within 17 days of order placement, to the designated DLA distribution facility in New Cumberland, PA. The original required delivery date is December 7, 2026, with a need ship date of August 21, 2026.
Nonferrous Metal (except Copper and Aluminum) Rolling, Drawing, and Extruding

POSTED

about 4 hours ago

DEADLINE

in 12 days
View Details
NAICS: 339991
New
DIBBS
RUBBER SHEET, SOLIDThe contract specifies the procurement of a solid rubber sheet measuring 36 inches square and 0.063 inch thick, with a Shore Durometer range of 45.0 minimum to 55.0 maximum, smooth on both sides, and manufactured from synthetic rubber. The item is classified as a Type I shelf-life item with a 12-month lifespan, requiring at least 85% of that shelf life to remain at time of delivery, and all cure and expiration dates must be clearly marked per MIL-STD-129 in calendar quarter and year format. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced via R or I numbers, and sampling must comply with MIL-STD-1916 or ASQ H1331 Table 1, with zero non-conformances allowed unless otherwise stated in the contract. Attributes are classified with verification levels or AQLs, and unspecified attributes are deemed major. Mercury and mercury-containing compounds are prohibited unless exceptions apply for specific functional uses outlined in NAVSEA 5100-003D, and any portable devices containing mercury must have shockproof construction with a secondary containment barrier. The rubber sheet must be free of asbestos as defined in FED-STD-313. Markings are required every three feet with the specification number, revision letter, type, and class, along with the quarter and year of cure or manufacture, following MIL-STD-190 for performance, legibility, color, and environmental resistance. The contractor must certify understanding of bare item markings prior to award. The item, identified by NSN 9320-00-641-3051, is procured competitively under a military specification with a single unit quantity, a 20-day delivery window from award, and is managed by the Department of Defense under contract SPE8E9-26-T-3238.
Gasket, Packing, and Sealing Device Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333413
New
DIBBS
FAN, TUBEAXIALThe contract specifies the procurement of a tube axial fan with NSN 4140011636009 and part number 033037000 from ROTRON INCORPORATED, for a quantity of nine units, under solicitation SPE8E9-26-T-3215. Delivery is required within 215 days from the contract award, FOB origin, with no variance allowed in quantity, and inspection and acceptance occur at the destination. Packaging must comply with MIL-STD-2073-1E and DLA packaging requirements, including marking per MIL-STD-129 with no special codes, and palletization as specified. The item is subject to critical application standards and covered defense information protocols. Mercury and mercury-containing compounds are strictly prohibited unless explicitly exempted for functional uses like batteries, fluorescent lamps, or specialized instruments, and where allowed, must include a secondary containment barrier in accordance with NAVSEA 5100-003D. Bare items must be marked with the contract number, NAWC CAGE, and part number unless overridden by technical drawings. Traceability to NAVAIR aircraft launch and recovery equipment standards applies, and all materials must conform to the DLA Master List of Technical and Quality Requirements referenced in the contract. The unit of issue is each, priced per unit, with total value derived from the fixed quantity.
Industrial and Commercial Fan and Blower and Air Purification Equipment Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 12 days
View Details