Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

Launch Interface Supply

Active

Federal

Response Deadline08/12/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract seeks the supply of a single launch interface system designed to deploy drone targets with full mechanical and electrical compatibility with existing drone and ground control station systems. This is a subcontract under a Small Business Set Aside, specifically reserved for small businesses as defined by the SBA, and falls under NAICS code 333992 for other miscellaneous manufacturing. The opportunity was posted on July 28, 2026, with responses required by 5:00 PM on August 12, 2026. Performance is expected to be conducted at a location with a zip code of 32542, and the contracting agency is the Department of Defense under the office designation FA2823 Aftc Pzio. No point of contact information or specific city or state details are provided beyond the zip code, and the solicitation number is not assigned. The contract is accessible online through the SAM.gov platform via the provided UI link.

General Info

Small business subcontract for drone target launch system, DoD, NAICS 333992, due Aug 12, 2026, performance in 32542.

Agency

Department Of Defense → FA2823 Aftc PzioView Agency

NAICS

333992 - Welding and Soldering Equipment ManufacturingView NAICS

Place of Performance

0, FL, 32542, USA

Set-Aside

SBA

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 28

subcontract

Response DeadlineAug 12

Submission deadline

Response Deadline

08/12/2026, 05:00:00 PM UTCin 14 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → FA2823 Aftc Pzio

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → FA2823 Aftc Pzio

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Supply of 1 launch interface system for deploying drone targets, with mechanical and electrical compatibility to drone and GCS systems.

Similar Contracts

Same NAICS industry code

SOLDERING STATIONThe contract pertains to the procurement of 290 units of a digital soldering station with part number WE1010NA and NSN 3439-01-521-7022, sourced from CAGE 65LN0 Apex Tool Group, LLC. The unit features a digital LCD display, operates within a temperature range of 200 to 850 degrees Fahrenheit, includes a USB port, and draws 85 watts at 120VAC, with dimensions of 5.91 inches in length, 4.72 inches in width, and 3.86 inches in height. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date or award date depending on acquisition size. Packaging must comply with DLA standards, and government identification must be removed from any non-accepted supplies. The product is designated as an exact match per the purchase order text, meaning only this specific part number is acceptable. Delivery is required within 60 days of award, and the solicitation number is SPE8E5-26-Q-0359 with a response deadline of August 11, 2026. The contract is issued by the Department of Defense through the DDSP New Cumberland Facility, and inquiries should be directed to Brandon Wicker at the provided contact information. This item has no shelf life requirement and may be subject to Covered Defense Information provisions.

DDSP NEW CUMBERLAND FACILITY

POSTED

about 19 hours ago

DEADLINE

ELECTRODE, WELDINGThe contract specifies the procurement of welding electrodes with a diameter of 0.125 inches and a length of 14 inches, featuring an extruded flux coating and packaged in hermetically sealed 10-pound containers as the unit of issue. The product must comply with the technical and quality requirements outlined in AWS A5.15-90 Revision NR and is governed by DLA’s Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on the acquisition size. Packaging must adhere to MIL-STD-2073-1E and MIL-STD-129, with no special marking required, and palletization must follow DLA packaging standards. The material is identified by NSN 3439-01-060-7479 and is classified as ENIFE-CI-A. The delivery is mandated to be FOB origin within 10 days of the required delivery date of December 19, 2025, with zero variance allowed in quantity. Inspection and acceptance occur at the destination, and the shipment is destined for the SAGAMI STORAGE FACILITY in Sagamihara, Kanagawa, Japan, under RDD 555 with transportation governed by DLA procedural notes. The contract is issued under solicitation SPE8E5-26-T-3702, with a response deadline of August 10, 2026, and the product falls under NAICS code 333992. The point of contact is Ira Hedgepeth of the Department of Defense, and all packaging, marking, and shipping procedures reflect strict compliance with federal and defense standards for hazardous materials and logistics.

DLA PACKAGING REQUIREMENTS FOR PROCUREMENT UNIT CONTAINER SHALL BE

POSTED

about 19 hours ago

DEADLINE

ELECTRODE, WELDINGThe contract is for welding electrodes, specified as 3/32 inch in diameter and 12 inches in length, with a unit of issue of 10 pounds per CO, totaling one CO. The material is governed by technical and quality requirements referenced in the DLA Master List of Technical and Quality Requirements, specifically TDP Rev A Gen 1 compliant with AWS A5.15-90 and QAP-127. Packaging must adhere to MIL-STD-2073-1E and MIL-STD-129, with special marking code 00 indicating no additional marking requirements. The product is subject to DLA packaging and hazardous materials shipping regulations, including IP025, and must be palletized per RP001. The delivery point is FOB origin with a strict 10-day delivery timeline, and inspection and acceptance occur at the destination. The material is to be shipped to the SAGAMI STORAGE FACILITY in Japan, with a required delivery date of December 23, 2025. The NSN is 3439-00-262-2742, under contract SPE8E6-26-T-3902, and the solicitation closed on August 10, 2026. All shipments must comply with DLA procedural notes C19 and C20 for transportation and first destination handling, and the point of contact for inquiries is Brett Scull.

Defense Logistics Agency

POSTED

about 19 hours ago

DEADLINE

10-Micron Filtration System Supply & IntegrationThe contract solicits the supply and installation of 10-micron inline filtration systems equipped with isolation valves for oil and coolant lines to ensure consistent fluid purity within operational environments. This effort is focused on maintaining the integrity and longevity of critical fluid systems by reducing contamination risks, with all equipment to be integrated directly into existing lines at the designated place of performance. The scope requires precise engineering and installation to meet rigorous performance standards, ensuring seamless compatibility and reliability under operational conditions. This is a total small business set-aside under the SBA program, classified under NAICS code 333992, and issued by the Department of Defense throughFA4528 5 Cons. All bids must be submitted by the deadline of July 30, 2026, at 4:00 PM, and the work must be performed at Minot Air Force Base, with ZIP code 58704. The solicitation is structured as a subcontract and is only open to small businesses eligible under federal set-aside guidelines, with no information provided regarding a specific point of contact or additional documentation beyond the public posting link.

POSTED

DEADLINE

ROD, WELDINGThis contract pertains to the procurement of welding rods classified as SPECIAL EMPHASIS material (Level I) for use in critical shipboard systems, where failure could lead to catastrophic consequences including loss of life, ship damage, or system failure. The material must comply strictly with MIL-I-23413 and its Interim Change 6, encompassing detailed requirements for design, composition, and testing including alloy identity verification, liquid penetrant testing, and certification of mechanical and chemical properties. Traceability is mandatory from raw material through final delivery, requiring unique heat-lot markings on containers and complete documentation linking each unit to its certified test results. The contractor must maintain a quality system aligned with ISO-9001, ISO-10012, and ISO/IEC 17025, or alternatively MIL-I-45208 and MIL-STD-45662, and must submit documented quality procedures prior to production. All certifications must be signed, unqualified, and free of disclaimers with no transcription permitted. Delivery is governed by a strict 365-day schedule with mandatory submission of certification data through the Wide Area WorkFlow (WAWF) system at least 20 days prior to shipment, followed by acceptance review by Portsmouth Naval Shipyard prior to any material transport. The contract prohibits shipment until formal acceptance is granted, and requires precise WAWF routing with designated government points of contact and email notification. Alloy identity test methods must be submitted for Navy approval before any testing begins and all sub-suppliers must be vetted and audited by the prime contractor. The product must be mercury-free, marked appropriately, and packaged per MIL-STD-2073. The contract is issued under emergency acquisition flexibilities, with a total small business set-aside, and is subject to Buy American Act requirements. Final inspection is 100% for traceability, certification completeness, and compliance, and all waivers or deviations—whether critical, major, or minor—must be formally requested and approved via the Electronic Contractor Data Submission system. The contractor is prohibited from applying material designators to non-fastener components and must adhere to strict control procedures for government-furnished equipment and proprietary design changes through formal Engineering Change Proposals.

Navsup Weapon Systems Support Mech

POSTED

DEADLINE

Optional Valve Insertion Equipment SupplyDekalb County Government is seeking a subcontractor to supply specialized tools for the installation of quick insert valves under pressure, encompassing hot tapping and sealing equipment necessary for pipeline maintenance and repair operations without system shutdown. The solicitation targets vendors capable of delivering certified, industry-standard equipment designed for safe and efficient valve insertion in live pressure environments, ensuring compliance with operational safety and performance benchmarks. The opportunity is classified under NAICS code 333992, indicating it falls within the miscellaneous manufacturing sector, and is open for bid submission until August 27, 2026, with no set-aside provisions specified. While no point of contact or detailed performance location is provided, the contract will likely support infrastructure projects within Georgia, and interested parties must access the official portal via the provided link for full submission guidelines and technical requirements.

Dekalb County Government

POSTED

DEADLINE

Solvac Bi-Solvent Cleaning System Assembly & IntegrationThe contract involves the on-site assembly and integration of a 3-stage Solvac bi-solvent ultrasonic cleaning system paired with Flexitrac modular automation, requiring comprehensive mechanical and electrical setup, calibration, and precise alignment to ensure full operational functionality. This work must be completed at the designated location in Crane, Indiana, with all components delivered, installed, and tested to meet performance specifications in a controlled industrial environment. The scope encompasses both the physical construction of the system and its seamless integration with the automation platform to enable efficient, automated cleaning cycles. The contract is classified as a subcontract under NAICS code 333992, issued by the Naval Surface Warfare Center Crane under the Department of Defense, with a response deadline of August 3, 2026. All activities must be performed in compliance with federal acquisition regulations and defense industry standards, and the successful bidder is responsible for coordinating logistics, personnel, and equipment to meet stringent timelines. The placement of performance is fixed at Crane, Indiana, and no alternative locations are permitted, requiring the contractor to manage all on-site resources and ensure minimal disruption to existing operations during installation and commissioning.

POSTED

DEADLINE

Supply of Multiprocess Welder (XMT400 ArcReach)The contract entails the supply and delivery of five Miller Multiprocess Welders, model P/N 907865004, designed to deliver a configurable output range of 15 to 425 amps and compatible with carbon electrodes up to 5/16 inch in diameter. These welders, identified in the solicitation as XMT400 ArcReach units, are intended for military use and must meet specified technical standards for performance and reliability. The procurement is structured as a subcontract under a Total Small Business Set-Aside designation, exclusive to small businesses as defined by the Small Business Administration, with the NAICS code 333992 identifying it within the manufacturing sector for other general purpose machinery. The opportunity was posted on July 27, 2026, with a response deadline of July 31, 2026, at 10:00 PM Eastern Time, and the contracting activity is managed by DLA Maritime - Pearl Harbor under the Department of Defense, although specific performance location and point of contact details are not provided in the metadata.

DLA Maritime - Pearl Harbor

POSTED

DEADLINE

Supply of Cable Extension Heater (ArcReach)The contract involves the supply and delivery of nine Miller Cable Extension Heaters with part number 301451, each configured with side-connect air-cooled cables or quick wraps, designed for seamless integration with up to six thermocouple sensors to provide real-time temperature feedback. These heaters are essential for precise thermal control in specialized applications, and the requirement emphasizes full operational compatibility between the heating units and the sensor network. The solicitation is structured as a subcontract under a Total Small Business Set-Aside, designated under NAICS code 333992, ensuring eligibility is restricted to small business concerns as defined by the SBA. The offering is managed by DLA Maritime - Pearl Harbor on behalf of the Department of Defense, with a posted date of July 27, 2026, and a response deadline of July 31, 2026, at 10:00 PM. The place of performance and exact delivery location are not specified, indicating flexibility in logistics while maintaining adherence to federal defense procurement standards. All proposals must comply with technical specifications for integration, thermal accuracy, and mechanical compatibility, and bidders must be certified small businesses capable of fulfilling the full scope without subcontracting beyond allowable limits.

DLA Maritime - Pearl Harbor

POSTED

DEADLINE

ARCREACH, CBLE & WELDER, XMT 400This solicitation, numbered SPMYM4-26-Q-3597, is a strict Brand Name Only acquisition for the Miller Brand Name XMT 400 ArcReach, Cable & Welder, and no substitutions or alternate products will be accepted under any circumstance. Offerors must submit their quotation along with the required technical data sheet, if applicable, via email to the designated Contracting Specialist by the deadline of July 31, 2026, at 10:00 PM Hawaii Standard Time. In addition to the quotation, vendors must complete specific designated fields on Pages 1 and 3, and Pages 21 through 23 of the solicitation document. If Standard Form SF-1449 is not used, a written statement affirming full acceptance of all terms, conditions, and provisions must be included. Failure to comply with any submission requirement will result in the quotation being deemed non-responsive and excluded from consideration. Quotations must be firm-fixed-price, representing the total cost for all materials, labor, packaging, and delivery without any room for adjustment after award. Vendors are required to unconditionally accept the government’s purchase order at the quoted price, and any attempt to modify terms or pricing after award will be treated as non-acceptance. The original equipment manufacturer, brand name, part number, and country of origin must be clearly identified, with proof of authorized distribution or OEM certification potentially required to validate authenticity and warranty. The solicitation is a Total Small Business Set-Aside under NAICS code 333992, and evaluations will be based on technical acceptability, delivery, and price. All inquiries must be directed to the Contracting Specialist via email, and failure to meet any condition will jeopardize eligibility for award.

DLA Maritime - Pearl Harbor

POSTED

DEADLINE

ELECTRODE,WELDINGThis contract, issued under solicitation number N0010426QFG29 by the Naval Supply Systems Command Weapon Systems Support in Mechanicsburg, Pennsylvania, seeks welding electrodes classified as Special Emphasis Level I material for use in critical shipboard systems where failure could result in catastrophic loss of life or vessel integrity. The items must strictly conform to specification T9074-BC-GIB-010/0200 and associated appendixes, including specific requirements for chemical composition, mechanical properties, and welding parameters, with chromium content limited to 0.20% to control hexavalent chromium fumes. All materials must be traceable from heat lot to final delivery via unique identifiers on container labels, and certification data must be submitted via WAWF to Portsmouth Naval Shipyard prior to shipment, with no material allowed to ship without formal acceptance. Contractors must maintain an ISO-9001 or equivalent quality system, comply with strict documentation standards, and provide signed, unqualified certifications affirming full compliance with all contractual and specification requirements. The contract mandates 100% inspection of traceability markings and certification documents, prohibits transcribed or disclaimered data, and requires strict control over subcontractors and supply chain integrity. Delivery is scheduled over 365 days with early or incremental shipments permitted at no added cost, and variations in quantity are limited to a maximum of -5% under specific conditions. All materials must be mercury-free, packaged in accordance with MIL-STD-2073, and shipped in 10-pound containers with proper labeling. Compliance with Buy American and small business subcontracting provisions is required, and waivers or deviations must be formally requested and approved through the ECDS system. The contracting officer retains authority to conduct government quality assurance at source, and all certifications, engineering change proposals, and documentation must be electronically submitted using ECDS or WAWF. The procurement is issued under emergency acquisition flexibility, and only qualified products listed on the approved QPL are acceptable, with no exceptions for unapproved sources.

Navsup Weapon Systems Support Mech

POSTED

DEADLINE

Small Business Prime Contractor (Set-Aside Opportunity)The contract is a Total Small Business Set-Aside under FAR 19.5, exclusively available to small businesses, for the management and fulfillment of delivery of a Welding Qualification Test Kit. The NAICS code 333992 identifies the industry as Other Manufacturing, indicating the specialized nature of the product required. Performance of the contract must occur at the New Cumberland facility with a ZIP code of 17070-5002, under the oversight of the Department of Defense’s DDSP New Cumberland Facility. The solicitation was posted on July 23, 2026, with a firm deadline for responses on August 3, 2026. Although classified as a subcontract in type, the opportunity is structured as a prime contract award, meaning the selected small business will serve as the prime contractor responsible for end-to-end delivery without requiring subcontracting to another entity. All responsibilities, including compliance with federal acquisition regulations pertaining to small business set-asides and timely fulfillment of technical requirements, rest fully with the winning small business entity.

DDSP NEW CUMBERLAND FACILITY

POSTED

DEADLINE

More opportunities from Department Of Defense → FA2823 Aftc Pzio

Same awarding agency

Flight Training Delivery at Contractor FacilityThe contract requires the delivery of two days of hands-on flight training for government personnel at the contractor’s facility, utilizing supplied drone systems, a developed curriculum, and certified instructors. The training is designed to provide practical experience with drone operations under supervised conditions, ensuring participants gain proficiency in real-world scenarios. All equipment, instructional materials, and qualified personnel necessary to execute the training are the responsibility of the contractor. The training is subject to performance at a designated location with a zip code of 32542, and the work is structured as a subcontract under a Small Business Set Aside, specifically designated as total set aside for small businesses. The North American Industry Classification System code is 611519, indicating the scope falls under other schools and instruction. The solicitation was posted on July 28, 2026, with a response deadline of August 12, 2026, at 5:00 PM. The contracting agency is the Department of Defense, identified under the office designation FA2823 Aftc Pzio. While no specific point of contact or detailed office address is provided, the place of performance is clearly defined. The contract is accessible via the SAM.gov portal, and bidders must qualify as a small business to be eligible for award under the set aside provisions. Performance must be completed at the contractor’s facility, and adherence to the provided curriculum and use of the government-supplied drone systems is mandatory.

Other Technical and Trade Schools

POSTED

DEADLINE

Paired Hand Controller SupplyThe contract seeks the supply of two paired hand controllers designed for manual operation of drones, ensuring full compatibility with ground control stations and drone target systems. These controllers are essential for precise, real-time drone manipulation in operational environments and must meet technical specifications to integrate seamlessly with existing military-grade systems. The solicitation is a subcontract under a Small Business Set Aside, specifically designated for total small business participation, with the NAICS code 334418 indicating classification under other semiconductor and related device manufacturing. Performance is required at a location with zip code 32542, and all responses must be submitted by August 12, 2026, at 5:00 PM. The contract is managed by the Department of Defense through the FA2823 AFC PZIO office, with no specific point of contact listed, and interested parties must reference the official SAM.gov listing for further details and submission protocols.

Printed Circuit Assembly (Electronic Assembly) Manufacturing

POSTED

DEADLINE

Ground Control Station Supply with Mission Planner SoftwareThe contract requires the supply of two ground control stations preloaded with Mission Planner software, designed specifically for use with drone targets to enable mission planning, telemetry monitoring, and flight control functionalities. Each station must be fully compatible with the designated drone systems and capable of supporting operational requirements in real time. The solicitation is a subcontract under a Small Business Set Aside designation, reserved entirely for small businesses as defined by the SBA, and is classified under NAICS code 334118 which pertains to other electronic instrument manufacturing. The proposed delivery must satisfy technical specifications for seamless integration and reliable performance in field operations. The posting date is July 28, 2026, with a firm response deadline of August 12, 2026, at 5:00 PM. The place of performance is identified as a location with a zip code of 32542, and the contracting agency is the Department of Defense under the office designation FA2823 Aftc Pzio. There is no designated point of contact listed, and all inquiries must be directed through the official SAM.gov portal using the provided UI link. The contract does not specify additional deliverables beyond the two configured ground control stations, though compliance with software compatibility and hardware reliability standards is implied and critical to successful bid submission.

Computer Terminal and Other Computer Peripheral Equipment Manufacturing

POSTED

DEADLINE

Commercial Drone Targets SupplyThe contract is for the supply of ten commercial off-the-shelf drone targets designed to meet Technical Requirements Documents (TRD) and serve as test targets for military evaluation. Each drone must be fully compatible with standard ground control stations and hand controllers to ensure seamless operational integration during testing scenarios. The requirement is issued as a subcontract under a Small Business Set Aside designation, meaning only small businesses are eligible to bid. The North American Industry Classification System code 334511 identifies the category as the manufacturing of guided missile and space vehicle parts and equipment. The place of performance is specified with a ZIP code of 32542, located in Florida, and responses must be submitted by August 12, 2026, at 5:00 PM Eastern Time. The solicitation was posted on July 28, 2026, by the Department of Defense under the FA2823 AFTC PZIO office.

Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument Manufacturing

POSTED

DEADLINE

Lenel Access Control MaintenanceThe contract issued by the Air Force Test Center Product Zone Integration Office at Eglin AFB, Florida, seeks commercial maintenance and on-call support services for the Honeywell S2 NetBox Access Control System serving the 7th Special Forces Group (Airborne) at Duke Field. Services include routine and emergency repairs, diagnostics, troubleshooting, bi-annual preventative maintenance, software updates, and component replacements for access readers, door locks, controllers, power supplies, and wiring, with cameras excluded. Work must be performed Monday through Friday, 0800 to 1700, excluding federal holidays, with emergency response availability as needed. All personnel must be Honeywell S2 NetBox certified, and performance must maintain a minimum 95% service completion rate. Contractors are required to submit a Quality Control Plan within 30 days of award and an annual System Health Assessment detailing equipment obsolescence, failure trends, and upgrade recommendations. Compliance with Contractor Manpower Reporting (CMR) via the Army’s secure portal is mandatory. The contract is a Firm Fixed Price acquisition under FAR Part 12, with a base performance period from September 1, 2026, to August 31, 2027, and two one-year option periods extending through August 31, 2029. While pricing details for all line items are blank, the solicitation requires full SAM registration, valid Unique Entity Identifier and CAGE code, and compliance with security clauses including safeguarding covered defense information, prohibition of Chinese telecommunications and surveillance equipment, and reporting of executive compensation. All offerors must meet U.S. citizenship or legal employment eligibility, pass NCIC and terrorist database screening, complete iWATCH anti-terrorism training, and adhere to strict physical security protocols including key control, badge identification, and prohibition of electronic recording devices. Proposals must be submitted by email to Wilma “Kat” Snider by 7:00 AM CST on August 6, 2026, and failure to comply with solicitation requirements will result in rejection. Payment will be processed exclusively through WAWF using the DoDAAC W81T9R, and the Contracting Officer’s Representative is Anthony Pickering, based at Eglin AFB.

Security Systems Services (except Locksmiths)

POSTED

DEADLINE

Lighter Knot Timber Sale - Eglin AFB, FLThe U.S. Air Force, through the AFTC/PZIOC at Eglin Air Force Base, Florida, is soliciting offers for a firm-fixed-price timber sale contract under solicitation number FA282326Q4007, targeting the removal of approximately 11,938 tons of pine timber from 370 acres across four designated areas: 20P44, 24P05, 24P06, and 22N13. The contract, classified under NAICS code 113310 for logging, is unrestricted and open to full and open competition. Bidders must submit a complete quotation via the SF1449 form, including unit price, total amount, and net amount for CLIN 0001, along with their signature and official details on the cover page. Offerors are required to provide proof of general and property damage liability insurance with a minimum coverage of $1 million, and failure to meet this or any other requirement will disqualify the submission. Payment is due in full at contract execution on a lump-sum basis, with the successful bidder remitting 100% of the bid amount before any work begins. The contract performance period is 365 days from the date of signing, and the winning offeror must attend a mandatory conference and contract signing within 14 calendar days after award notification, where they must present a list of all haul vehicles including state license plate numbers. No official site visit is scheduled, but potential bidders are strongly encouraged to inspect the area in advance by coordinating with Jackson Guard personnel or Michael Kratz. Responses must be submitted electronically by email no later than 10:00 AM CST on August 27, 2026, and questions must be received by August 19, 2026. The contract is governed by FAR clauses 52.212-1, 52.212-2, and 52.212-4, and all terms are detailed in the attached Statement of Work dated July 2026, SF1449 solicitation, and accompanying maps. Submission to the designated point of contact, Jared Dunn, is the only accepted method, and bids not conforming to the prescribed format or missing mandatory documentation will be deemed non-responsive.

POSTED

DEADLINE

Drone TargetsThis acquisition is a competitive Request for Quote (RFQ) issued under solicitation number FA2823-26-Q-0062 by the Air Force Test Center at Eglin AFB, Florida, for the procurement of drone targets and associated equipment under FAR Part 12 as supplemented by Department of War Class Deviations 2026-O0028, 2026-O0037, and 2026-O0041, which implement the Revolutionary FAR Overhaul. The requirement is a total small business set-aside under NAICS code 336411 with a size standard of 1,500 employees, meaning only firms certified as small businesses in SAM are eligible to respond; non-compliant submissions will be deemed non-responsive. The contract is a firm-fixed-price purchase order with no advance payments, and all offers must be submitted in U.S. dollars and in English. The items to be procured include ten drone targets, two ground control stations with mandatory Mission Planner® software, two paired hand controllers, one launch interface, and two days of flight training at the contractor’s facility. Delivery is FOB destination to Eglin AFB, Florida, with a 45-calendar-day performance period from the date of award, and all items must comply with MIL-STD-130 for Unique Item Identifier (UII) marking using two-dimensional Data Matrix symbology as defined by ISO/IEC 16022 and ISO/IEC 15434 format indicators. Technical acceptability is evaluated as a pass/fail criterion based on alignment with the Technical Requirement Document dated 06 July 2026 and a Supplier Performance Risk System (SPRS) rating of Blue, Purple, Green, White, Black, or Green Pending; all other ratings are unacceptable. Award will be made to the lowest priced, technically acceptable, and responsible offeror without trade-offs between cost and technical factors. Offerors must be registered in SAM and WAWF, and must submit their UEI and CAGE codes, point of contact details, warranty terms, delivery timeframe, and any price or discount information with their proposal. All representations and certifications must be included if not already in SAM, and no compensation will be provided for proposal preparation. Questions must be submitted by 12:00 PM CDT on 7 August 2026, and offers are due by 12:0

Aircraft Manufacturing

POSTED

DEADLINE

As-Built Documentation and ReportingThe contract titled As-Built Documentation and Reporting is a small business set-aside subcontract under the NAICS code 541330, reserved exclusively for total small businesses as defined by the SBA. It requires the successful bidder to prepare as-built drawings, submit weekly progress reports, and compile final documentation fully compliant with Department of Defense formatting standards. The work is to be performed at a location in Goulds, Florida with a zip code of 32542, and the contract is managed by the Department of Defense under the agency designation FA2823 Aftc Pzio. Proposals must be submitted by August 20, 2026, at 3:00 PM Eastern Time, following the posting of the opportunity on July 27, 2026. All deliverables must meet exact DoD specifications to ensure regulatory and operational compliance, with no set place of performance beyond the specified location in Goulds.

Engineering Services

POSTED

DEADLINE

Electrical Materials SupplyThe contract titled Electrical Materials Supply is a subcontract under a Total Small Business Set-Aside as defined by the SBA and FAR 19.5, exclusively available to small businesses. It encompasses the supply of all required electrical components, including the main panel, breakers, LED fixtures, conduit, and wiring, with strict adherence to federal sourcing regulations. The North American Industry Classification System code for this solicitation is 423690, indicating distribution of electrical equipment and supplies. Performance of the contract is required at the location in Goulds, Florida, with a ZIP code of 32542. The solicitation was posted on July 27, 2026, and responses must be submitted no later than August 20, 2026, at 3:00 PM. The contracting agency is the Department of Defense, specifically under the FA2823 AFTC PZIO office. While no point of contact is listed and additional geographic details for the office address are missing, bidders must ensure compliance with all federal procurement requirements and deliver materials that meet the specified technical and sourcing standards. The contract opportunity is accessible via the SAM.gov platform for interested small businesses seeking to engage in this defense-related supply effort.

Other Electronic Parts and Equipment Merchant Wholesalers

POSTED

DEADLINE

Supply of LED Lighting FixturesThe contract calls for the manufacture and supply of LED exterior wall light fixtures that meet IP65+ environmental protection standards and are compliant with dark-sky lighting guidelines to minimize light pollution. These fixtures must also satisfy Buy American Act requirements, ensuring all components and manufacturing processes originate domestically. The solicitation is structured as a subcontract under a Total Small Business Set-Aside, exclusively reserved for small businesses as defined by the Small Business Administration, with the North American Industry Classification System code 335129 designating the scope to other electrical equipment manufacturing. Work must be performed at a specified location in Goulds, Florida, with a zip code of 32542 and the response deadline set for August 20, 2026, at 3:00 PM EST. The contracting activity is affiliated with the Department of Defense through the FA2823 Aftc Pzio organization, indicating military or federal facility use for the delivered lighting systems.

Other Lighting Equipment Manufacturing

POSTED

DEADLINE

Exterior LED Wall Light ReplacementThe contract awards a total small business set-aside for the replacement of six exterior wall-mounted light fixtures with energy-efficient LED fixtures, including all necessary wiring, mounting, and compliance with applicable environmental standards. The work is part of a subcontract under the Department of Defense and falls under NAICS code 238210, indicating it pertains to electrical contracting services. The place of performance is specified as Goulds, Florida, with a zip code of 32542, and the contract is open for responses until August 20, 2026, with a posting date of July 27, 2026. All work must meet environmental compliance requirements and deliver measurable energy efficiency improvements while ensuring proper installation and long-term reliability of the new lighting system.

Electrical Contractors and Other Wiring Installation Contractors

POSTED

DEADLINE

Sub-Panel Circuit Breaker RefreshThe contract involves the replacement of 15 outdated or faulty circuit breakers in a sub-panel, with associated work including updated labeling for clarity and compliance, as well as full adherence to arc flash safety standards to ensure operational safety and regulatory alignment. All work must be performed in accordance with industry best practices for electrical system upgrades and safety protocols, with particular emphasis on minimizing risk during installation and post-installation verification. This is a small business set-aside subcontract under NAICS code 238210, solicited by the Department of Defense through the FA2823 AFTC PZIO office, with performance required in Goulds, Florida, 32542. The opportunity was posted on July 27, 2026, and responses are due by August 20, 2026, at 3:00 PM. Only small business concerns qualify to bid, and the contract is intended to support infrastructure modernization efforts under defense facility maintenance priorities.

Electrical Contractors and Other Wiring Installation Contractors

POSTED

DEADLINE