Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

WELDING QUALIFICATION

Active
SPE8E5-26-T-3684Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract pertains to the procurement of a Welding Qualification Test Kit under solicitation SPE8E5-26-T-3684, with a total quantity of 122 units, each identified by NSN 3439-01-679-7021 and part number 8027662-70. The requirement is designated as a Total Small Business Set-Aside, targeting small businesses under NAICS code 333992, and is managed by the Department of Defense through the DDSP New Cumberland Facility. Delivery is required within 167 days after order placement, with the solicitation opening on July 23, 2026, and responses due by August 3, 2026. Technical and quality specifications are governed by the DLA Master List of Technical and Quality Requirements referenced in RA001, with packaging governed by RP001 and export control compliance mandated under RQ032 due to the presence of technical data subject to ITAR or EAR regulations. Access to this controlled data is restricted to contractors with approved US/Canada Joint Certification Program status, completed DOD export control training, and formal DLA authorization. The contract also mandates removal of government identification from non-accepted supplies and applies Covered Defense Information protocols as outlined in RD002. The point of contact for inquiries is Brandon Wicker, reachable via email and phone provided in the contract data.

General Info

Procurement of 122 welding test kits under small business set-aside, ITAR/EAR controlled, delivery in 167 days.

Agency

Department Of Defense → DDSP NEW CUMBERLAND FACILITYView Agency

NAICS

333992 - Welding and Soldering Equipment ManufacturingView NAICS

Place of Performance

2083 NORMANDY DRIVE DOOR 113 TO 134, NEW CUMBERLAND, PA, 17070-5002, US

Set-Aside

SBA

Documents

(1)

SPE8E5-26-T-3684.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → DDSP NEW CUMBERLAND FACILITY
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → DDSP NEW CUMBERLAND FACILITY
View Agency Profile
Office AddressUS
Contacts
BRANDON WICKER
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
WELDING QUALIFICATION TEST KIT
WELDING QUALIFICATI
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
CAGE: 98752 Warner Robins Air Logistics Center PN: 8027662-70 UI = EA QUP = 001
RD002, COVERED DEFENSE INFORMATION APPLIES
RQ032: EXPORT CONTROL OF TECHNICAL DATA
This item has technical data some or all of which is subject to export-control of either the International Traffic in Arms regulations (ITAR) or the Export Administration Regulations (EAR), and cannot be exported without prior authorization from either the Department of State or the Department of Commerce. Export includes disclosure of technical data to foreign persons and nationals whether located in the United States or abroad. This requirement applies equally to foreign national employees and U.S. companies and their foreign subsidiaries. DFARS 252.225-7048 is applicable to this data.
The Defense Logistics Agency (DLA) limits distribution of export-control technical data to DLA contractors that have an approved US/Canada Joint Certification Program (JCP) certification, have completed the Introduction to Proper Handling of DOD Export-Controlled Technical Data Training and the DLA Export-Controlled Technical Data Questionnaire (both are available at the web address given below), and have been approved by the DLA controlling authority to access the export-controlled data. NSN/Part Number: 3439-01-679-7021 Quantity: 122 EA Purchase Request: 7017585946QTY: 122 Delivery: 167 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 333992
New
DIBBS
CONNECTOR, RECEPTACLThis contract specifies the procurement of an electrical connector receptacle under the NSN 5935-01-225-6820 and part number M28840/14AA1S1, aligned with MIL-DTL-28840/14G and MIL-DTL-28840 specifications. The item is classified as a qualified product requiring compliance with the Qualified Products List for Federal Stock Class 5935 connector assemblies and contacts, as outlined in procurement note H01. The product is designated as a critical application item and must adhere to rigorous technical and quality standards referenced in the DLA Master List of Technical and Quality Requirements. Strict prohibitions forbid the intentional addition of mercury or mercury-containing compounds, except in specific exempted applications such as batteries, fluorescent lamps, and medical instruments, with additional containment and shock-proofing requirements for portable mercury-containing devices. The use of Class I ozone-depleting substances in any phase of design, manufacturing, or testing is strictly prohibited without explicit contracting officer approval, though exceptions apply to commercial items and numbered parts. Packaging and marking must conform to MIL-STD-2073-1E and MIL-STD-129, with no special marking required. The item must be delivered FOB origin in 91 days, with zero variance in quantity, inspected and accepted at destination. Each unit is priced at $28.00, totaling $784 for 28 units, and must be shipped to the DLA Distribution facility in New Cumberland, PA, following DLAD Proc Notes C19 and C20 for transportation and first destination handling. The original required delivery date is June 27, 2026, with a need ship date of November 3, 2026, under solicitation SPE7M5-26-T-351P, issued by the Department of Defense’s Active Devices Division.
ACTIVE DEVICES DIVISION

POSTED

about 21 hours ago

DEADLINE

in 10 days
View Details
NAICS: 333992
New
DIBBS
TRANSFORMER, POWERThe contract pertains to the procurement of a power transformer, specifically identifiable by part number 397849-07403 and NSN 5950009576725, designated as a critical application item supplied by SIMMONDS PRECISION PRODUCTS INC. The requirement mandates strict adherence to the DLA Master List of Technical and Quality Requirements, which supersede all other standards including ASTM D3951, and compliance with MIL-STD-129 for labeling and packaging. The item must be packaged in accordance with Fed-Std-313, using IP025 for hazardous materials or commercial packaging otherwise, and palletized per DLA Packaging Requirements. The transformer is subject to zero defect acceptance under MIL-STD-1916 or an equivalent zero-based sampling plan, with all attributes treated as major unless otherwise specified, and inspection and acceptance occur at the destination. Cybersecurity requirements include a CMMC Level 2 Self-Assessment and adherence to rules for covered defense information. Delivery is FOB origin within five days of contract award to the Marine Aviation Logistics Squadron 16 in San Diego, with shipment required via the fastest traceable means excluding parcel post. The contract specifies a fixed quantity of one unit, with no variance allowed, and an original delivery date of July 23, 2026, under solicitation SPE4A5-26-T-308A. The unit of issue is each, and all packaging must reflect the prescribed QUP and DLA-recognized labeling. Additional compliance obligations include physical identification of the item, proper use of measuring and test equipment, and removal of government identification from non-accepted supplies.
ASC SUPPLIER OPER OEM DIVISION

POSTED

about 21 hours ago

DEADLINE

in 7 days
View Details
NAICS: 333992
New
Federal
Anchor Windlass Removal and Reinstallation (On-Vessel Mechanical Services)
Sflc Procurement Branch 2(00085)

POSTED

1 day ago

DEADLINE

in 10 days
View Details
NAICS: 333992
New
Federal
ROD,WELDINGThis contract, issued under solicitation number N0010426QFE28 by the Naval Supply Systems Command Weapon Systems Support in Mechanicsburg, Pennsylvania, specifies the procurement of low alloy steel covered arc welding electrodes designated as E7018-B2L, sized at 1/8 inch and 14 inches in cut length, supplied in 10-pound containers. The material is classified as SPECIAL EMPHASIS (Level I), indicating it is critical to shipboard systems where failure could result in catastrophic consequences including loss of life or vessel. Strict compliance is required with AWS A5.5, AWS A5.01, and MIL-E-22200/8 specifications, with mandatory deviations including full chemical and moisture testing for all electrodes, and adherence to corrected references within MIL-E-22200/8. The welding electrodes must be traceable from production through delivery via unique lot or heat identifiers marked on each container, with certification data linked directly to physical units. No mercury or mercury compounds are permitted, and all materials must be supplied under a certified ISO-9001 quality system, with ISO-10012 and ISO/IEC 17025 for calibration, or an acceptable alternative per MIL-I-45208 and MIL-STD-45662. All supplier submissions, including certificates of compliance and test reports, must be submitted via the Wide Area WorkFlow (WAWF) system to Portsmouth Naval Shipyard for pre-shipment review and acceptance, with shipping prohibited until formal acceptance is received. The contractor must maintain comprehensive traceability of all materials through every process, including subcontracted operations, and submit engineering change proposals for any configuration modifications affecting form, fit, function, or interface. Final inspections require 100% verification of traceability markings and certification documentation, with certifications needing unqualified, signed statements of conformity—no disclaimers permitted. The contract mandates supplier evaluations, government rights to inspect at source, and strict controls over government-furnished material. Delivery must be completed within 365 days, with early or incremental shipments allowed at no additional cost. Subcontracting, Buy American, and national defense priority rating requirements apply, and all documentation must be submitted through the ECDS portal, with electronic format submissions mandatory for configuration control. The product is subject to a one-year warranty from date of delivery and is governed by emergency acquisition flexibilities, reinforcing the urgency and critical nature of the procurement
Navsup Weapon Systems Support Mech

POSTED

1 day ago

DEADLINE

in 13 days
View Details
NAICS: 333992
New
Federal
ELECTRODE,WELDINGThis contract involves the procurement of welding electrodes intended for use in critical shipboard systems, emphasizing high standards of quality, traceability, and compliance with military specifications. The materials must conform to MIL-E-22200 and MIL-DTL-22200/1 standards, with certifications required for each batch to ensure performance and conformance. The delivery schedule spans 365 days, with the possibility of early and incremental deliveries at no additional cost, and a permissible quantity variation of -5%. Inspection and acceptance are designated to occur at the destination, with government quality assurance performed at source and at the final point of delivery, ensuring strict adherence to specifications and proper documentation, including certificates of compliance and traceability labels. The contract mandates a comprehensive quality management system aligned with ISO-9001, ISO-10012, or ANSI-Z540.3 standards, subject to government review and audits. It also stipulates detailed procedures for handling government-furnished materials, subcontractor inspections, and engineering change proposals, emphasizing rigorous control over configuration, documentation, and non-conformance management. Special emphasis is placed on safety-critical aspects, including the prohibition of mercury contact, strict marking and certification requirements, and the need for detailed records of inspections, certifications, and deviations. The procurement process is conducted under emergency acquisition flexibilities, with specific instructions for packaging, marking, and submission of data, ensuring the delivery of high-integrity materials vital for ship safety and operational readiness.
Navsup Weapon Systems Support Mech

POSTED

1 day ago

DEADLINE

in 13 days
View Details
NAICS: 333992
New
Federal
INSERT, WELDING
Navsup Weapon Systems Support Mech

POSTED

1 day ago

DEADLINE

in 14 days
View Details
NAICS: 333992
New
Federal
BRAZE RING 1 IN
Navsup Weapon Systems Support Mech

POSTED

1 day ago

DEADLINE

in 14 days
View Details
NAICS: 333992
New
Federal
34--WELDING QUALIFICATION
DLA Troop Support

POSTED

1 day ago

DEADLINE

in 10 days
View Details
NAICS: 333992
New
DIBBS
Low-Pressure Air Membrane Dehydrator SupplyThe contract requires the manufacture, testing, packaging, and delivery of two Low-Pressure Air Membrane Dehydrators identified by NSN 4460014630649, with strict adherence to Department of Defense Logistics Agency technical and packaging specifications. All work must be completed to meet established military standards for performance, quality, and reliability, ensuring the units are fully operational and compliant upon delivery. The place of performance is designated as New Cumberland, Pennsylvania, with a zip code of 17070-5002, indicating the operational and logistical focus of the project within this facility. The contract is classified as a subcontract under NAICS code 333992, which pertains to other industrial machinery manufacturing, and is issued by the DDSP New Cumberland Facility under the Department of Defense. The solicitation was posted on July 22, 2026, with a response deadline of August 3, 2026, leaving a narrow window for potential vendors to submit proposals and demonstrate capability. All deliverables must be fully documented, properly packaged, and ready for military logistics handling upon completion.
DDSP NEW CUMBERLAND FACILITY

POSTED

2 days ago

DEADLINE

in 10 days
View Details
NAICS: 333992
New
DIBBS
ELECTRODE, WELDINGThe contract specifies the procurement of welding electrodes conforming to AWS A5.10 ER5356 specifications, with a nominal diameter of 0.030 inches, supplied on 1-pound rolls, packaged horizontally, and designed for direct current reverse polarity shielded arc welding. The item is identified by NSN 3439-00-892-4382 and a unit of issue of RL, with a total quantity of 307 rolls required. The product is classified as a commercial item and is procured under a military specification without shelf life restrictions. Technical and quality requirements are incorporated by reference from the DLA Master List of Technical and Quality Requirements, and packaging must comply with DLA standards. The material must not contain intentionally added mercury or mercury compounds, except for specific exempted uses such as batteries or instruments, and any portable devices containing mercury must meet shock-proof and secondary containment criteria per NAVSEA 5100-003D. All hazardous materials supplied must be accompanied by Safety Data Sheets compliant with OSHA’s revised Hazard Communication Standard, including GHS-aligned labeling, and suppliers are required to submit both SDS and labels for contracting officer approval prior to award. Employee training on the updated hazard communication standards is mandatory. The contract solicitation number is SPE8E5-26-T-3670, issued by DLA Dist San Joaquin, with a response deadline of August 3, 2026, and delivery expected within 167 days after order. The place of performance is Tracy, California, 95304-5000, and the primary point of contact is Ira Hedgepeth.
DLA DIST SAN JOAQUIN

POSTED

2 days ago

DEADLINE

in 10 days
View Details
NAICS: 333992
New
DIBBS
CONNECTOR, PLUG, FIBER OThe contract pertains to the procurement of a fiber optic plug designated as NSN 6060014231017, with a quantity of 210 units, delivered under an indefinite-delivery contract structured for a one-year period and subject to a maximum value of $350,000. Delivery must occur within 97 days after release order, on an FOB origin basis, with inspection and acceptance taking place at the destination point. The product must comply with MIL-PRF-28876/7F revision F dated January 3, 2021, and MIL-PRF-28876F(2) revision F dated November 9, 2023, ensuring mechanical and optical performance standards. Strict adherence to packaging standards per MIL-STD-2073-1E and marking per MIL-STD-129 is required, including the use of a D3 unit container, E5 intermediate container, and Pack Code U, with palletization following DLA’s RP001 requirements. The item must be free of mercury and mercury-containing compounds unless exempted for specified functional uses such as batteries or sensors, and must not contain any Class I ozone-depleting substances without explicit written approval from the Contracting Officer. All components must originate from qualified products or manufacturers listed under QPL or QML, and any configuration changes require formal Engineering Change Proposals or variance requests. Hazardous materials must be identified and labeled per 29 CFR 1910.1200 and Federal Standard No. 313, with Safety Data Sheets provided and updated as needed. Radioactive materials exceeding thresholds must be disclosed and labeled accordingly. Transportation by sea must utilize U.S.-flag vessels unless a waiver is granted with a 45-day advance notice. Contractors must comply with DFARS clauses addressing cybersecurity, whistleblower rights, disclosure of information, and restrictions on compensation of former DoD officials. Offerors must provide a Unique Entity Identifier and CAGE code and represent their small business status or socioeconomic certifications, with joint ventures requiring full partner disclosures. All proposals must be submitted electronically via DIBBS by August 6, 2026, with award based on a trade-off evaluation of price and non-price factors.
MARITIME SUPPLY CHAIN

POSTED

2 days ago

DEADLINE

in 13 days
View Details
NAICS: 333992
New
DIBBS
SOLDERING STATIONThe contract is for the procurement of 15 soldering stations with NSN 3439-01-183-4632, specified as a Type II Style D cylindrical handle, three-wire plug, screwdriver tip-shaped unit rated for 120 volts single-phase operation, featuring a removable tip and a three-digit LED display capable of showing both temperature settings and actual tip temperature with one-degree Fahrenheit or Celsius resolution. The item must comply with DLA packaging requirements and incorporate technical and quality specifications referenced from the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date or award date depending on acquisition size. The soldering station is subject to potential defense information controls under RD003 and must be procured in full competition per applicable military or federal specifications. The solicitation number is SPE8E9-26-T-3218, with a response deadline of August 3, 2026, and a posted date of July 22, 2026. The delivery requirement is 167 days after order award, with the place of performance specified as Tinker AFB, Oklahoma, 73145-8000. The procurement falls under NAICS code 333992 and is managed by the Department of Defense’s Construction & Equipment MRO Service I. Primary point of contact is Matthew Kruc, reachable via email and phone provided in the contract data. The item is not subject to any set-aside classification and is being procured through a fully competitive federal acquisition process.
CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

2 days ago

DEADLINE

in 10 days
View Details

More opportunities from Department Of Defense → DDSP NEW CUMBERLAND FACILITY

Same awarding agency

NAICS: 483110
New
DIBBS
Domestic Transportation of Defense SuppliesThe contract obligates the contractor to transport defense supplies exclusively via U.S.-flag vessels, with any use of foreign-flag vessels requiring formal justification and approval. Compliance with transportation regulations is enforced through reporting via the Web Automated Waybill Facility, ensuring full traceability and adherence to federal standards. All operations must be conducted in alignment with the North American Industry Classification System code 483110, which pertains to coastal and Great Lakes water transportation. Performance is centered at the New Cumberland, Pennsylvania location with a zip code of 17070-5002, and the contracting entity is the DDSP New Cumberland Facility under the Department of Defense. The solicitation was posted on July 23, 2026, with responses due by July 28, 2026, and is classified as a subcontract under an open solicitation status with no set-aside provisions specified.

POSTED

about 21 hours ago

DEADLINE

in 4 days
View Details
NAICS: 541512
New
DIBBS
Cybersecurity Compliance & NIST SP 800-171 AssessmentThe contract requires the implementation and assessment of cybersecurity controls to safeguard Covered Defense Information in full compliance with NIST SP 800-171 and DFARS regulations. The scope centers on ensuring that all technical, operational, and management controls outlined in the NIST framework are properly deployed, documented, and validated across systems handling sensitive defense data. This includes conducting a thorough evaluation of current security postures, identifying gaps, and executing corrective actions to achieve and maintain compliance. The work must be performed at the designated facility in New Cumberland, Pennsylvania, with a strict deadline for proposal submission by July 28, 2026. As a subcontract under the Department of Defense, the effort is critical to supporting national security objectives and will be subject to rigorous oversight to confirm adherence to federal cybersecurity mandates. The North American Industry Classification System code 541512 indicates the work falls under computer systems design and related services, underscoring the technical nature of the required deliverables.
Computer Systems Design Services

POSTED

about 21 hours ago

DEADLINE

in 4 days
View Details
NAICS: 541620
New
DIBBS
Hazardous Materials Compliance & Safety Data ManagementThis contract requires strict compliance with hazard labeling and safety data sheet (SDS) management protocols for all hazardous materials used in component handling or packaging operations. The work must ensure that all materials are properly identified with accurate, up-to-date labels and that corresponding SDS documentation is maintained, accessible, and in full alignment with regulatory standards. The subcontractor is expected to implement systems that guarantee continuity and accuracy in hazard communication throughout the lifecycle of material handling, from receipt to packaging and final transfer. The contract was posted on July 23, 2026, with a response deadline of July 28, 2026, and is associated with the NAICS code 541620, indicating services in environmental consulting and related scientific and technical fields. The performance location is designated as New Cumberland, Pennsylvania, 17070-5002, under the oversight of the Department of Defense's DDSP New Cumberland Facility. All activities must be conducted to meet federal requirements for workplace safety and hazardous material handling, with no set-aside provisions specified, making it open to qualified subcontractors regardless of business size or status.
Environmental Consulting Services

POSTED

about 21 hours ago

DEADLINE

in 4 days
View Details
NAICS: 561910
New
DIBBS
Military Packaging and Labeling ServicesThe contract requires specialized services for the individual packaging, immobilization, and serialized container labeling of defense equipment in strict accordance with military standards. All work must ensure the integrity, traceability, and readiness of military assets throughout the supply chain, with each item uniquely identified and securely contained to meet operational and logistical requirements. The services are critical for maintaining compliance with Department of Defense protocols and ensuring that equipment remains protected, identifiable, and deployable under all conditions. This is a subcontract opportunity issued by the DDSP NEW CUMBERLAND FACILITY under the Department of Defense, with performance designated for the ZIP code 17070-5002 in New Cumberland. The solicitation was posted on July 23, 2026, and responses are due by July 28, 2026. The NAICS code 561910 indicates the scope falls under Other Support Activities for Transportation, reflecting the specialized logistics and handling nature of the work. Bidders must be prepared to demonstrate capability in military-grade packaging, serialization, and labeling processes, with full adherence to applicable defense specifications without exception.
Packaging and Labeling Services

POSTED

about 21 hours ago

DEADLINE

in 4 days
View Details
NAICS: 334516
New
DIBBS
Electro-Mechanical Actuator SupplyThe contract calls for the supply of a specific electro-mechanical rotary actuator with part number 20007 ASSY 2, intended for defense applications that demand strict adherence to military-grade packaging, labeling, and regulatory standards. The equipment must meet all technical and compliance requirements necessary for secure military use, with no tolerance for deviation from established protocols. The solicitation is issued as a subcontract under the NAICS code 334516, with the Department of Defense through its DDSP NEW CUMBERLAND FACILITY as the overseeing organization, and performance is required at the facility located in NEW CUMBERLAND, Pennsylvania, with a ZIP code of 17070-5002. The solicitation was posted on July 23, 2026, and responses are due by July 28, 2026, indicating a short and time-sensitive acquisition window. Bidders must be prepared to demonstrate full capability in fulfilling defense-specific obligations, including documentation, quality assurance, and delivery timelines aligned with military operational needs. The contract is not designated for any specific set-aside category, meaning it is open to general industry participation provided all technical and regulatory criteria are met. The official solicitation can be accessed via the DIBBS platform using the provided link, and potential offerors are expected to comply with all federal procurement regulations applicable to defense contractors.
Analytical Laboratory Instrument Manufacturing

POSTED

about 21 hours ago

DEADLINE

in 4 days
View Details
NAICS: 332911
New
DIBBS
DISK, VALVEThe contract specifies the procurement of a disc assembly for a 2-1/2 inch relief valve, identified by NSN 4820-00-467-2913 and part number 07915005000 from Emerson Automation Solutions, classified as a critical application item. The requirement is for a single unit with no allowable quantity variance, to be delivered FOB origin within 168 days, with a required ship date of January 19, 2027, and an original delivery deadline of July 8, 2027. All packaging must comply with MIL-STD-2073-1E and DLA Packaging Requirements, including specific methods for preservation, wrapping, and unit containment, with marking adhering strictly to MIL-STD-129 and no special marking codes applied. The item must be palletized per DLA standards and shipped to the DDSP New Cumberland Facility in Pennsylvania. The contract prohibits the intentional addition or direct contact of mercury or mercury-containing compounds with the supplied hardware, except for functional uses in batteries, fluorescent lamps, instruments, sensors, controls, weapon systems, or NAVSEA-specified reagents, with portable mercury-containing devices requiring shock-proof construction and a secondary containment boundary per NAVSEA 5100-003D. Acceptance and inspection are both designated at the destination, and the contract incorporates all technical and quality requirements from the DLA Master List of Technical and Quality Requirements, referenced by R and I numbers. Transportation directives are governed by DLAD Proc Notes C19 and C20, and the solicitation number SPE7MC-26-T-146G was issued under the NAICS code 332911 with a response deadline of August 3, 2026, and the contracting office contact is Paula McClary at DLA.
Industrial Valve Manufacturing

POSTED

about 21 hours ago

DEADLINE

in 10 days
View Details
NAICS: 332911
New
DIBBS
SEAT, VALVEThe contract pertains to the supply of a SEAT, VALVE with part number 264080102-45CD and NSN 4820014789171, limited to Electric Boat Corporation with no foreign suppliers permitted. The item must comply with stringent DLA packaging and technical requirements incorporated by reference from the DLA Master List of Technical and Quality Requirements, and mercury or mercury-containing compounds are strictly prohibited unless explicitly exempted for functional uses such as batteries, lamps, sensors, or weapons systems specified by NAVSEA, with additional safeguards required for portable mercury-containing devices. Delivery is set for 168 days after award, FOB origin, with zero tolerance for quantity variance, and the full shipment of 67 units must be packaged per MIL-STD-2073-1E and marked in accordance with MIL-STD-129 without special markings. Palletization follows DLA packaging guidelines, and the delivery destination is the DLA Distribution facility in New Cumberland, Pennsylvania; the original required delivery date is October 7, 2027, with a need ship date of January 19, 2027. The solicitation number is SPE7MC-26-T-152H, issued under NAICS 332911 by the Department of Defense through the DDSP New Cumberland Facility, with primary point of contact Paula McClary, and the contract is subject to DLA transport and freight procedures as outlined in specific procurement notes.
Industrial Valve Manufacturing

POSTED

about 21 hours ago

DEADLINE

in 10 days
View Details
NAICS: 332911
New
DIBBS
VALVE, BUTTERFLYThe contract is for the procurement of two butterfly valves without operators, identified by NSN 4820-01-259-5719 and part number 144-703-035-360-036, furnished under solicitation SPE7MC-26-T-148D. Delivery is required within 168 days of contract award, with FOB origin terms and zero tolerance for quantity variance. Inspection and acceptance occur at the destination, and packaging must strictly comply with MIL-STD-2073-1E and MIL-STD-129, including specific preservation methods and packaging codes. All packaging, preservation, and marking must be free of mercury or mercury compounds, except for functional uses in approved items like batteries or sensors as defined by NAVSEA, and portable devices containing mercury must have a secondary containment system. The use of Class I ozone-depleting chemicals is entirely prohibited, with any substitute chemicals requiring prior approval. The valves must conform to technical and quality requirements referenced from the DLA Master List of Technical and Quality Requirements, controlled by the revision in effect on the solicitation issue date. The delivery address is the DLA Distribution facility in New Cumberland, Pennsylvania, and the unit of issue is each. The contract sets a required ship date of January 19, 2027, with an original delivery deadline of March 19, 2027, and is managed by the Department of Defense through the DDSP New Cumberland Facility, with primary point of contact Paula Mcclary.
Industrial Valve Manufacturing

POSTED

about 21 hours ago

DEADLINE

in 10 days
View Details
NAICS: 332911
New
DIBBS
VALVE, GLOBEThe contract is for the procurement of 14 globe valves with NSN 4820-01-506-9986 and part number 166B-011H, manufactured by Milwaukee Valve Co., Inc., under solicitation SPE7MC-26-T-150S. The item is classified as a critical application product requiring strict adherence to DLA’s Master List of Technical and Quality Requirements, which supersede all other specifications including ASTM D3951. Mercury or mercury-containing compounds are strictly prohibited from intentional addition or direct contact with the valve unless specifically exempted for functional uses in batteries, fluorescent lights, instruments, sensors, controls, weapon systems, or chemical reagents approved by NAVSEA; portable mercury-containing devices must feature shockproof construction and a secondary containment boundary per NAVSEA 5100-003D. Tooling for casting or forging processes may be required for production, and vendors are directed to contact DLA’s Casting and Forging Assistance team for sourcing support. Packaging must comply with MIL-STD-129 and DLA’s RP001 packaging requirements, with all items delivered FOB origin in accordance with the specified Unit of Issue. The delivery schedule requires fulfillment within 168 days, with a mandatory ship date of January 19, 2027, and delivery destination set at the DLA Distribution facility in New Cumberland, Pennsylvania. Inspection and acceptance occur upon arrival at the destination, with zero tolerance for quantity variance. The contract was posted on July 23, 2026, with responses due by August 3, 2026, under NAICS code 332911, and is managed by the Department of Defense through the DDSP New Cumberland Facility.
Industrial Valve Manufacturing

POSTED

about 21 hours ago

DEADLINE

in 10 days
View Details
NAICS: 333515
New
DIBBS
FILE, ROTARYThis contract pertains to the procurement of 481 units of a rotary component identified by NSN 3455-01-232-8413 and purchase request 7017586174, with a unit price of $481.00 and a total value of $231,361. Delivered FOB origin, the item must be delivered within 167 days of contract award, with a required delivery date of October 19, 2026, and a need ship date of January 18, 2027. No quantity variance is permitted, and inspection and acceptance occur at the destination. Packaging must comply with ASTM D3951 as supplemented by all applicable DLA Master List of Technical and Quality Requirements, with labeling and marking conforming to MIL-STD-129 and palletization following RP001 guidelines. The unit of issue is each (EA), and the delivery destination is the DLA Distribution DDSP New Cumberland Facility at 2083 Normandy Drive, Doors 113 to 134, New Cumberland, PA 17070-5002. Transportation and freight instructions are governed by DLAD Proc Notes C19 and C20. The solicitation number is SPE8E5-26-T-3682, issued under NAICS code 333515, and all requirements referenced in the DLA Master List take priority over any general commercial or technical specifications including CID A-A-51146C Revision C dated 04/11/2022. The point of contact is Khue Nguyen at khue.nguyen@dla.mil or 215-737-2076.
Cutting Tool and Machine Tool Accessory Manufacturing

POSTED

about 21 hours ago

DEADLINE

in 10 days
View Details
NAICS: 332911
New
DIBBS
DISK, VALVEThe contract specifies the procurement of a disk valve made of corrosion-resistant steel, identified by NSN 4820-01-361-4999 and part number 236461 from Marotta Controls Inc, with a quantity of 11 units required. Delivery is due within 168 days from the contract award, with shipment FOB origin and inspection and acceptance occurring at the destination. Packaging must comply with MIL-STD-2073-1E, including specific preservation methods, wrapping materials, and container types, and marking must adhere to MIL-STD-129 without any special markings. The item is classified as a critical application item, and mercury or mercury-containing compounds are strictly prohibited from intentional addition or direct contact with the valve, except for approved functional uses such as in batteries, instruments, or weapons as defined by NAVSEA, with portable devices containing mercury requiring shockproof design and secondary containment per NAVSEA 5100-003D. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements referenced by R or I numbers, and the applicable revision is determined by the solicitation or award date depending on acquisition size. Packaging and palletization follow DLA’s procurement requirements, and the delivery destination is the DLA Distribution Center at New Cumberland, Pennsylvania. The contract’s solicitation number is SPE7MC-26-T-148E, with an original required delivery date of June 23, 2027, and a need ship date of January 19, 2027. The unit price is $11.00 per unit, totaling $121.00, with zero tolerance for quantity variance. The contracting office is the Department of Defense, and primary point of contact is Paula McClary, reachable through the provided email and phone number.
Industrial Valve Manufacturing

POSTED

about 21 hours ago

DEADLINE

in 10 days
View Details
NAICS: 339920
New
DIBBS
LIFE PRESERVER, VESTThe contract specifies the procurement of 150 life preserver vests, identified by NSN 4220-01-415-9817 and part number MV3192, to be supplied exclusively by Mustang Survival Mfg., Inc. under CAGE code 8GFM5. The item is designated as a critical application item with no shelf life requirement and must comply with all technical and quality standards referenced in the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date. Strict restrictions prohibit the use of asbestos and the intentional addition of mercury or mercury-containing compounds, with narrow exceptions for specific functional components such as batteries and instruments, which must meet additional containment and safety standards per NAVSEA 5100-003D. Packaging must conform to MIL-STD-2073-1E and DLA packaging requirements, with marking adhering to MIL-STD-129, including no special marking codes. The delivery point is the DLA Distribution DDSP New Cumberland Facility, with FOB origin terms and a firm delivery deadline of 120 days after award. Inspection and acceptance occur at destination, with zero tolerance for quantity variance. Transportation and shipping instructions follow DLA procedural notes C19 and C20, and the purchase request is linked to a specific material need date of May 19, 2026.
Sporting and Athletic Goods Manufacturing

POSTED

about 21 hours ago

DEADLINE

in 6 days
View Details