Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

Recirculating Aquaculture System (RAS) – Trout Incubation Module

Active

Federal

Response Deadline08/06/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract entails the supply and delivery of a fully self-contained recirculating aquaculture system designed for trout incubation, featuring two racks each equipped with twelve 18-inch incubators, totaling twenty-four incubation units. The system must meet strict technical specifications and adhere to government marking standards to ensure compliance with federal procurement requirements. The equipment is intended for use at a designated performance location in Trail, Oregon, with a zip code of 97541, and must be capable of supporting sustained, controlled aquatic environments for trout hatchery operations. This is a small business set-aside subcontract under the SBA program, specifically reserved for total small business participation as defined by FAR 19.5, with a NAICS code of 333992 for other commercial and industrial machinery and equipment manufacturing. The opportunity was posted on July 23, 2026, and responses are due by August 6, 2026, by 5:00 PM. The contracting entity operates under the Department of Defense through the W071 Endist Portland office, indicating defense-related aquaculture needs, potentially supporting military nutrition or research initiatives. All deliverables must be completed and delivered in accordance with the stated deadlines and regulatory frameworks governing federal subcontracting.

General Info

Small business subcontract for trout hatchery aquaculture system delivery to Trail, Oregon, for DoD use by August 6, 2026.

Agency

Department Of Defense → W071 Endist PortlandView Agency

NAICS

333992 - Welding and Soldering Equipment ManufacturingView NAICS

Place of Performance

Trail, OR, 97541, USA

Set-Aside

SBA

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 23

subcontract

Response DeadlineAug 6

Submission deadline

Response Deadline

08/06/2026, 05:00:00 PM UTCin 13 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → W071 Endist Portland

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → W071 Endist Portland

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Supply and delivery of a self-contained RAS with two racks of 12x18 trout incubators (2 total), compliant with technical specifications and government marking standards.

Similar Contracts

Same NAICS industry code

ELECTRODE,WELDINGThis contract, issued under solicitation number N0010426QFG29 by the Naval Supply Systems Command Weapon Systems Support in Mechanicsburg, Pennsylvania, seeks welding electrodes classified as Special Emphasis Level I material for use in critical shipboard systems where failure could result in catastrophic loss of life or vessel integrity. The items must strictly conform to specification T9074-BC-GIB-010/0200 and associated appendixes, including specific requirements for chemical composition, mechanical properties, and welding parameters, with chromium content limited to 0.20% to control hexavalent chromium fumes. All materials must be traceable from heat lot to final delivery via unique identifiers on container labels, and certification data must be submitted via WAWF to Portsmouth Naval Shipyard prior to shipment, with no material allowed to ship without formal acceptance. Contractors must maintain an ISO-9001 or equivalent quality system, comply with strict documentation standards, and provide signed, unqualified certifications affirming full compliance with all contractual and specification requirements. The contract mandates 100% inspection of traceability markings and certification documents, prohibits transcribed or disclaimered data, and requires strict control over subcontractors and supply chain integrity. Delivery is scheduled over 365 days with early or incremental shipments permitted at no added cost, and variations in quantity are limited to a maximum of -5% under specific conditions. All materials must be mercury-free, packaged in accordance with MIL-STD-2073, and shipped in 10-pound containers with proper labeling. Compliance with Buy American and small business subcontracting provisions is required, and waivers or deviations must be formally requested and approved through the ECDS system. The contracting officer retains authority to conduct government quality assurance at source, and all certifications, engineering change proposals, and documentation must be electronically submitted using ECDS or WAWF. The procurement is issued under emergency acquisition flexibility, and only qualified products listed on the approved QPL are acceptable, with no exceptions for unapproved sources.

Navsup Weapon Systems Support Mech

POSTED

about 14 hours ago

DEADLINE

Small Business Prime Contractor (Set-Aside Opportunity)The contract is a Total Small Business Set-Aside under FAR 19.5, exclusively available to small businesses, for the management and fulfillment of delivery of a Welding Qualification Test Kit. The NAICS code 333992 identifies the industry as Other Manufacturing, indicating the specialized nature of the product required. Performance of the contract must occur at the New Cumberland facility with a ZIP code of 17070-5002, under the oversight of the Department of Defense’s DDSP New Cumberland Facility. The solicitation was posted on July 23, 2026, with a firm deadline for responses on August 3, 2026. Although classified as a subcontract in type, the opportunity is structured as a prime contract award, meaning the selected small business will serve as the prime contractor responsible for end-to-end delivery without requiring subcontracting to another entity. All responsibilities, including compliance with federal acquisition regulations pertaining to small business set-asides and timely fulfillment of technical requirements, rest fully with the winning small business entity.

DDSP NEW CUMBERLAND FACILITY

POSTED

DEADLINE

CONNECTOR, RECEPTACLThis contract specifies the procurement of an electrical connector receptacle under the NSN 5935-01-225-6820 and part number M28840/14AA1S1, aligned with MIL-DTL-28840/14G and MIL-DTL-28840 specifications. The item is classified as a qualified product requiring compliance with the Qualified Products List for Federal Stock Class 5935 connector assemblies and contacts, as outlined in procurement note H01. The product is designated as a critical application item and must adhere to rigorous technical and quality standards referenced in the DLA Master List of Technical and Quality Requirements. Strict prohibitions forbid the intentional addition of mercury or mercury-containing compounds, except in specific exempted applications such as batteries, fluorescent lamps, and medical instruments, with additional containment and shock-proofing requirements for portable mercury-containing devices. The use of Class I ozone-depleting substances in any phase of design, manufacturing, or testing is strictly prohibited without explicit contracting officer approval, though exceptions apply to commercial items and numbered parts. Packaging and marking must conform to MIL-STD-2073-1E and MIL-STD-129, with no special marking required. The item must be delivered FOB origin in 91 days, with zero variance in quantity, inspected and accepted at destination. Each unit is priced at $28.00, totaling $784 for 28 units, and must be shipped to the DLA Distribution facility in New Cumberland, PA, following DLAD Proc Notes C19 and C20 for transportation and first destination handling. The original required delivery date is June 27, 2026, with a need ship date of November 3, 2026, under solicitation SPE7M5-26-T-351P, issued by the Department of Defense’s Active Devices Division.

ACTIVE DEVICES DIVISION

POSTED

DEADLINE

TRANSFORMER, POWERThe contract pertains to the procurement of a power transformer, specifically identifiable by part number 397849-07403 and NSN 5950009576725, designated as a critical application item supplied by SIMMONDS PRECISION PRODUCTS INC. The requirement mandates strict adherence to the DLA Master List of Technical and Quality Requirements, which supersede all other standards including ASTM D3951, and compliance with MIL-STD-129 for labeling and packaging. The item must be packaged in accordance with Fed-Std-313, using IP025 for hazardous materials or commercial packaging otherwise, and palletized per DLA Packaging Requirements. The transformer is subject to zero defect acceptance under MIL-STD-1916 or an equivalent zero-based sampling plan, with all attributes treated as major unless otherwise specified, and inspection and acceptance occur at the destination. Cybersecurity requirements include a CMMC Level 2 Self-Assessment and adherence to rules for covered defense information. Delivery is FOB origin within five days of contract award to the Marine Aviation Logistics Squadron 16 in San Diego, with shipment required via the fastest traceable means excluding parcel post. The contract specifies a fixed quantity of one unit, with no variance allowed, and an original delivery date of July 23, 2026, under solicitation SPE4A5-26-T-308A. The unit of issue is each, and all packaging must reflect the prescribed QUP and DLA-recognized labeling. Additional compliance obligations include physical identification of the item, proper use of measuring and test equipment, and removal of government identification from non-accepted supplies.

ASC SUPPLIER OPER OEM DIVISION

POSTED

DEADLINE

WELDING QUALIFICATIONThe contract pertains to the procurement of a Welding Qualification Test Kit under solicitation SPE8E5-26-T-3684, with a total quantity of 122 units, each identified by NSN 3439-01-679-7021 and part number 8027662-70. The requirement is designated as a Total Small Business Set-Aside, targeting small businesses under NAICS code 333992, and is managed by the Department of Defense through the DDSP New Cumberland Facility. Delivery is required within 167 days after order placement, with the solicitation opening on July 23, 2026, and responses due by August 3, 2026. Technical and quality specifications are governed by the DLA Master List of Technical and Quality Requirements referenced in RA001, with packaging governed by RP001 and export control compliance mandated under RQ032 due to the presence of technical data subject to ITAR or EAR regulations. Access to this controlled data is restricted to contractors with approved US/Canada Joint Certification Program status, completed DOD export control training, and formal DLA authorization. The contract also mandates removal of government identification from non-accepted supplies and applies Covered Defense Information protocols as outlined in RD002. The point of contact for inquiries is Brandon Wicker, reachable via email and phone provided in the contract data.

DDSP NEW CUMBERLAND FACILITY

POSTED

DEADLINE

Anchor Windlass Removal and Reinstallation (On-Vessel Mechanical Services)

Sflc Procurement Branch 2(00085)

POSTED

DEADLINE

Recirculating Aquaculture System (RAS) – Salmon Incubation ModuleThe contract entails the supply and delivery of a fully self-contained recirculating aquaculture system designed specifically for salmon incubation, featuring four racks with eight-tray incubators totaling 32 trays. The system must meet stringent technical specifications and adhere to all applicable government standards to ensure optimal water quality, temperature control, and biological filtration necessary for successful salmon egg development and early-stage fry rearing. The equipment is intended for use at a designated performance location in Trail, Oregon, with postal code 97541, and must be installed and operational in compliance with regulatory and operational requirements specific to federal aquaculture operations. This subcontract is a Total Small Business Set-Aside under the SBA program, meaning only small business concerns are eligible to bid, and it is classified under NAICS code 333992 for Other Commercial and Service Industry Machinery Manufacturing. The solicitation was posted on July 23, 2026, with a firm response deadline of August 6, 2026, at 5:00 PM local time. The contracting activity is managed by the Department of Defense through the W071 Endist Portland office, indicating this system supports a military or defense-related aquaculture initiative. All proposals must demonstrate technical capability, compliance with standards, and the ability to deliver within the specified timeline without delays.

W071 Endist Portland

POSTED

DEADLINE

Precision Die Bonder System Supply and IntegrationThe contract calls for the supply, installation, and commissioning of a high-accuracy die bonder specifically designed for advanced semiconductor packaging applications, requiring placement precision of five micrometers or better and integrated automated epoxy dispensing capabilities. This equipment must meet stringent performance benchmarks to support critical military and defense-grade semiconductor manufacturing processes. The work is to be performed at a facility with a zip code of 20375, which corresponds to the Naval Research Laboratory in Washington D.C., underscoring the defense-oriented nature of the project. The contract is structured as a subcontract under the Department of Defense and falls under NAICS code 333992, which covers other industrial machinery manufacturing. Proposals are due by August 7, 2026, with the opportunity posted on July 23, 2026, allowing potential vendors a three-week window to submit responses. The contracting activity is managed by the Naval Research Laboratory, and the system must be fully functional upon commissioning, including validation of accuracy, reliability, and integration with existing production workflows.

Naval Research Laboratory

POSTED

DEADLINE

ROD,WELDINGThis contract, issued under solicitation number N0010426QFE28 by the Naval Supply Systems Command Weapon Systems Support in Mechanicsburg, Pennsylvania, specifies the procurement of low alloy steel covered arc welding electrodes designated as E7018-B2L, sized at 1/8 inch and 14 inches in cut length, supplied in 10-pound containers. The material is classified as SPECIAL EMPHASIS (Level I), indicating it is critical to shipboard systems where failure could result in catastrophic consequences including loss of life or vessel. Strict compliance is required with AWS A5.5, AWS A5.01, and MIL-E-22200/8 specifications, with mandatory deviations including full chemical and moisture testing for all electrodes, and adherence to corrected references within MIL-E-22200/8. The welding electrodes must be traceable from production through delivery via unique lot or heat identifiers marked on each container, with certification data linked directly to physical units. No mercury or mercury compounds are permitted, and all materials must be supplied under a certified ISO-9001 quality system, with ISO-10012 and ISO/IEC 17025 for calibration, or an acceptable alternative per MIL-I-45208 and MIL-STD-45662. All supplier submissions, including certificates of compliance and test reports, must be submitted via the Wide Area WorkFlow (WAWF) system to Portsmouth Naval Shipyard for pre-shipment review and acceptance, with shipping prohibited until formal acceptance is received. The contractor must maintain comprehensive traceability of all materials through every process, including subcontracted operations, and submit engineering change proposals for any configuration modifications affecting form, fit, function, or interface. Final inspections require 100% verification of traceability markings and certification documentation, with certifications needing unqualified, signed statements of conformity—no disclaimers permitted. The contract mandates supplier evaluations, government rights to inspect at source, and strict controls over government-furnished material. Delivery must be completed within 365 days, with early or incremental shipments allowed at no additional cost. Subcontracting, Buy American, and national defense priority rating requirements apply, and all documentation must be submitted through the ECDS portal, with electronic format submissions mandatory for configuration control. The product is subject to a one-year warranty from date of delivery and is governed by emergency acquisition flexibilities, reinforcing the urgency and critical nature of the procurement

Navsup Weapon Systems Support Mech

POSTED

DEADLINE

ELECTRODE,WELDINGThis contract pertains to the procurement of welding electrodes designated as Special Emphasis Material (Level I) for use in critical shipboard systems, where failure could lead to catastrophic consequences including loss of life or vessel. The items must comply strictly with MIL-E-22200 and MIL-DTL-22200/1 specifications, including specific requirements for type, size, welding conditions, and mechanical properties, with no stress-relieving treatments or copper content restrictions applicable. All materials must be traceable from manufacture through final delivery via unique lot or heat identification marked on packaging, and certifications must be provided with each shipment, signed and unqualified, confirming full compliance. Delivery is due within 365 days with a permitted quantity variation of up to -5%, and early or incremental deliveries are accepted without additional cost. Government inspection occurs at destination, not source, and contractors must submit all certification data via WAWF to Portsmouth Naval Shipyard prior to shipment, with specific shipping, inspection, and acceptance codes required in the system. The contractor is required to maintain an ISO-9001-compliant quality system, with calibration standards aligned to ISO-10012 or ANSI-Z540.3 and ISO-17025, subject to Government audit at any time. Subcontractor oversight is mandatory, with prime contractors responsible for assessing and auditing all suppliers to ensure adherence to quality and traceability requirements. Packaging must comply with MIL-STD-2073, and all electrodes must be supplied in 10-pound containers with proper labeling including NSN and type designation. Mercury and mercury-containing compounds are prohibited, and no Material Designators may be applied except for fasteners. The solicitation references numerous military and industry specifications, and only qualified products listed on approved QPLs are acceptable. The offer due date is August 6, 2026, with payment terms extended to 45 days after delivery, and all data submissions must be processed through the ECDS portal. Waivers or deviations are strictly controlled and require written approval from the Contracting Officer, with critical safety deviations subject to the highest scrutiny.

Navsup Weapon Systems Support Mech

POSTED

DEADLINE

INSERT, WELDING

Navsup Weapon Systems Support Mech

POSTED

DEADLINE

BRAZE RING 1 IN

Navsup Weapon Systems Support Mech

POSTED

DEADLINE

More opportunities from Department Of Defense → W071 Endist Portland

Same awarding agency

Small Business Subcontracting Support (Administrative)The contract supports administrative functions essential for small business compliance and government contracting readiness, focusing on certification processes, SAM.gov registration, UEI and CAGE code management, and Department of Defense subcontracting reporting obligations. It is structured as a subcontract under a Total Small Business Set-Aside, meaning only small businesses qualified under SBA guidelines are eligible to compete, with the North American Industry Classification System code 541611 applying to management consulting services related to these administrative tasks. The work must be performed in Trail, Oregon, with a zip code of 97541, and responses are due by August 6, 2026, at 5:00 p.m. The contract is issued by the Department of Defense through the W071 Endist Portland office, emphasizing the need for precise, compliant support to ensure small business contractors meet federal regulatory requirements for participation in defense subcontracting networks.

Administrative Management and General Management Consulting Services

POSTED

DEADLINE

Supplier of Export-Controlled ComponentsThe contract is a small business set-aside subcontract for the supply of ITAR- or EAR-controlled subsystems including sensors, control systems, and specialized materials that require strict regulatory compliance and documentation. It is issued under the NAICS code 334511, which pertains to guidance, navigation, and control systems manufacturing, and is intended exclusively for small businesses as defined by the SBA. The solicitation was posted on July 23, 2026, with a response deadline of August 6, 2026, at 5:00 PM, and the work is to be performed at a location in Trail, Oregon, with a ZIP code of 97541. The contracting office is under the Department of Defense, specifically W071 Endist Portland, and participants must be prepared to handle export control requirements, maintain compliance with federal regulations, and submit necessary documentation to ensure lawful handling and delivery of controlled components.

Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument Manufacturing

POSTED

DEADLINE

Technical Documentation and Layout Plan DevelopmentThe contract is for the development of layout plans, schematics, and technical documentation to support proposal submission and ensure compliance with U.S. Army Corps of Engineers standards after award. It is a subcontract under a Total Small Business Set-Aside, meaning only small businesses are eligible to respond, and the NAICS code 541330 indicates the work falls under architectural and engineering services. The opportunity was posted on July 23, 2026, with a response deadline of August 6, 2026, at 5:00 PM. The place of performance is in Trail, Oregon, with a zip code of 97541, and the contracting office is W071 Endist Portland under the Department of Defense. While no specific point of contact is listed, all submissions must meet USACE technical and procedural requirements to be considered for award.

Engineering Services

POSTED

DEADLINE

Aquaculture System Integration and Installation SupportThe contract involves the on-site delivery, setup, alignment, plumbing, and commissioning of Recirculating Aquaculture System units at the Trail, Oregon location, with all work performed under government supervision. The project requires full integration of aquatic infrastructure systems in accordance with technical specifications, ensuring operational readiness upon completion. All activities must meet federal standards and be conducted in compliance with oversight requirements from the Department of Defense through the W071 Endist Portland office. This subcontract is set aside exclusively for small businesses under the SBA Total Small Business Set-Aside provision, as defined under FAR 19.5, and is classified under NAICS code 238990 for other construction-related services. The opportunity was posted on July 23, 2026, with a firm response deadline of August 6, 2026, requiring proposers to have demonstrated capability in aquaculture system installation, precision alignment, and commissioning under controlled environments. Performance is restricted to the specified site in Trail, Oregon, and no alternate locations are permissible.

All Other Specialty Trade Contractors

POSTED

DEADLINE

Traffic Control and Safety ServicesThe contract pertains to the installation and ongoing maintenance of temporary traffic control zones, signage, and safety barriers required during construction activities. It is classified as a subcontract under the NAICS code 561990, which covers other support services, and is managed by the Department of Defense through its W071 Endist Portland office. The work is intended to ensure public safety and regulatory compliance in areas impacted by construction, with all systems must be properly deployed, monitored, and adjusted throughout the project lifecycle. The solicitation was posted on July 23, 2026, with responses due by August 17, 2026, at 9:30 PM, providing potential bidders approximately four weeks to prepare and submit proposals. Although specific performance locations are not detailed, the services will be conducted in proximity to active construction sites under the oversight of the contracting agency.

All Other Support Services

POSTED

DEADLINE

Environmental Compliance and MonitoringThe contract under the title Environmental Compliance and Monitoring focuses on stormwater monitoring, spill prevention measures, and environmental compliance reporting throughout the duration of construction activities. It requires the contractor to implement and maintain systems that ensure adherence to environmental regulations, particularly those governing runoff control, contamination mitigation, and timely documentation of environmental incidents or corrective actions. The work is tied to a Department of Defense project managed by W071 Endist Portland and is classified as a subcontract under NAICS code 541620, indicating it involves environmental consulting and related services. All activities must align with federal and local environmental standards to minimize ecological impact during construction. The solicitation was posted on July 23, 2026, with a response deadline of August 17, 2026, at 9:30 PM Eastern Time, leaving potential bidders a limited window to prepare and submit proposals. The place of performance and specific location details are not disclosed, suggesting the project may span multiple sites or the exact location is pending further coordination. There is no set-aside designation indicated, meaning the opportunity is open to all eligible subcontractors without restriction based on business size or category. The point of contact information is unspecified, and the full contract details can be accessed via the provided SAM.gov link for further submission requirements.

Environmental Consulting Services

POSTED

DEADLINE

Structural Steel Fabrication and ErectionThe contract involves the fabrication and erection of a structural steel frame comprising columns, beams, and bracing for a Department of Defense project under the agency name W071 Endist Portland. The work is classified under NAICS code 332312, indicating it pertains to structural metal fabrication, and is designated as a subcontract opportunity. The solicitation was posted on July 23, 2026, with a firm response deadline of August 17, 2026, at 9:30 PM. The place of performance has not been specified, and no set-aside provisions or organizational type restrictions are indicated. All proposals must be submitted through the designated SAM.gov portal by the stated deadline to be considered for award.

Fabricated Structural Metal Manufacturing

POSTED

DEADLINE

Paving and Asphalt WorkThe contract awarded under the NAICS code 237310 entails the construction of access roads, parking lots, and other paved surfaces using asphalt and concrete, specifically for facilities managed by the Department of Defense under the agency name W071 Endist Portland. The work is structured as a subcontract and is open for bids with a response deadline of August 17, 2026, at 9:30 PM, following a posting date of July 23, 2026. The precise location of performance is not specified, but the scope requires adherence to federal construction standards for durable, high-traffic surfaces. All bidders must be prepared to meet material and labor specifications for both asphalt and concrete installations, ensuring compliance with defense infrastructure requirements. The opportunity is accessible via the SAM.gov platform for qualified subcontractors seeking to engage in defense-related paving projects.

Highway, Street, and Bridge Construction

POSTED

DEADLINE

Site Grading and EarthworkThe contract pertains to site grading and earthwork services involving excavation, cut and fill operations, and comprehensive site preparation to support infrastructure development. Work obligations include grading activities to achieve specified elevations, managing soil movement to balance earth quantities, and implementing erosion control measures to comply with environmental and regulatory standards. The project falls under NAICS code 237990, indicating it is classified as other heavy and civil engineering construction, and is structured as a subcontract under the Department of Defense. The opportunity was posted on July 23, 2026, with a deadline for responses set for August 17, 2026, at 9:30 PM. The place of performance and agency office location details are unspecified, but the responsible agency is identified as W071 Endist Portland. Participation requires adherence to federal subcontracting protocols and timely submission prior to the established deadline.

Other Heavy and Civil Engineering Construction

POSTED

DEADLINE

Concrete Foundations and SlabsThe contract pertains to the forming, reinforcing, and pouring of concrete for foundational structures, slabs-on-grade, and other structural elements necessary for construction projects under the Department of Defense. Work is categorized under NAICS code 238110, indicating specialized trade contracting for concrete work, and is issued as a subcontract opportunity tied to the W071 Endist Portland entity. The solicitation was posted on July 23, 2026, with a firm response deadline of August 17, 2026, at 9:30 PM Eastern Time. The place of performance is not specified beyond the broader organizational jurisdiction, and no set-aside provisions or target demographics are indicated. Interested parties must respond through the provided Sam.gov portal before the deadline to be considered for award.

Poured Concrete Foundation and Structure Contractors

POSTED

DEADLINE

HVAC System InstallationThe contract entails the supply and installation of comprehensive heating, ventilation, and air conditioning systems, including rooftop units, ductwork, and associated controls, for a Department of Defense facility under the NAICS code 238220. This is a subcontract opportunity posted on July 23, 2026, with a response deadline of August 17, 2026, at 9:30 PM Eastern Time. The work is to be performed at a location managed by W071 Endist Portland, though specific site details such as city, state, or zip code are not provided. The contract is open to qualified subcontractors without any specified set-aside preferences, and all proposals must be submitted through the official SAM.gov portal prior to the deadline.

Plumbing, Heating, and Air-Conditioning Contractors

POSTED

DEADLINE