This Solicitation opportunity from Department Of Defense was posted on July 8, 2025. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

ELECTRONIC COMPONEN

Closed

SPRPA125QEP51Federal

Submission Closed08/07/2025, 08:30:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

Solicitation # SPE7M1-27-T-1753

Solicitation SPE7M1-27-T-1753 is issued by the Defense Logistics Agency for the procurement of two circuit card assemblies, identified by NSN 5998375312139. The requirement is for parts conforming to the technical specifications of Consilium Marine US Inc, part number 90105100053-01A, and basic drawing number 19207 12675652 Revision D. The original required delivery date is July 24, 2025, with a delivery lead time of 20 days after order. Delivery is established as FOB Origin under the First Destination Transportation program, with the final destination being the USNS John L. Canley in San Diego, California. The contract mandates strict adherence to quality and packaging standards, including MIL-STD-2073-1E for packaging and MIL-STD-129 for marking. Inspection and acceptance will occur at the destination per FAR 52.246-2. Key regulatory requirements include compliance with the Buy American Act, DFARS 252.204-7016 regarding covered telecommunications equipment, and DFARS 252.204-7012 for safeguarding covered defense information. Invoicing and receiving reports must be processed electronically through the Wide Area WorkFlow system. Offerors are required to submit quotes via the DIBBS portal and must provide disclosure if using non-domestic materials.

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

DEADLINE

CIRCUIT CARD ASSEMBLY

Solicitation # SPE7M1-27-T-1776

Solicitation SPE7M1-27-T-1776 is a small business set-aside issued by the DLA Weapons Support Maritime Supply Chain for the procurement of two circuit card assemblies, identified by NSN 5998-20-001-3717. This is a restricted source item that must be manufactured according to OEM drawings, and only prequalified sources are eligible unless alternative manufacturers provide sufficient technical data per DLAI 3200.1. The delivery lead time is 161 days after order, with a need ship date of April 20, 2027, and a final required delivery date of September 15, 2027. Inspection and acceptance will occur at the destination. The contract mandates strict adherence to technical and quality requirements, including CMMC Level 2 self-assessment and the safeguarding of covered defense information. Because the items are classified as electrostatic sensitive devices, they require specific protective packaging and marking in accordance with MIL-PRF-81705, MIL-STD-2073-1E, and MIL-STD-129. Administrative requirements include electronic invoicing through the Wide Area WorkFlow system and compliance with the Buy American Act and Berry Amendment. Quotations must be submitted by November 9, 2026, to the DLA Weapons Support Maritime Supply Chain office in Columbus, Ohio.

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

DEADLINE

CIRCUIT CARD ASSEMBLY

Solicitation # SPE7M1-27-U-0824

Solicitation SPE7M1-27-U-0824 is a total small business set-aside for the procurement of 31 circuit card assemblies, identified by NSN 5998015307980. Issued by the DLA Weapons Support Maritime Supply Chain, this requirement may result in an indefinite delivery contract for a one-year period. The delivery timeline is set at 92 days after the order, with shipping terms as FOB Origin and both inspection and acceptance occurring at the destination. The procurement is conducted under the First Destination Transportation program to optimize costs through government-arranged transportation. Technical compliance requires adherence to MIL-STD-2073-1E for packaging, MIL-STD-129 for marking, and specific DLA packaging requirements under RP001. For printed circuit boards, the use of MIL-PRF-31032 is recommended. The contract mandates strict cybersecurity compliance, including a CMMC Level 2 self-assessment and safeguarding of covered defense information. Additionally, the contractor must ensure that mercury or mercury-containing compounds are not intentionally added to the hardware. All quotes must be submitted via the DIBBS portal, and payment processing is managed through the Wide Area WorkFlow system.

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

DEADLINE

Multi-Purpose Serve OEM ManufacturerThis subcontract opportunity, managed by the Department of Defense through DLA Mechanicsburg, requires the manufacture and supply of one Multi-Purpose Serve unit for prime contractors. The selected provider must be the Original Equipment Manufacturer or an authorized distributor capable of precision manufacturing according to Cage Code 4NCQ6 and reference SB-990179-AM. All units must adhere to MIL-STD-130 for physical identification marking and utilize proprietary tooling and materials to ensure design specifications are met. The procurement falls under NAICS code 334412 and was posted on October 28, 2026. Interested parties must submit their responses by the deadline of November 19, 2026. The final deliverable for this contract is one fully completed Multi-Purpose Serve unit.

SPRMM1 DLA Mechanicsburg

POSTED

DEADLINE

Circuit Card Assembly Fabrication and AssemblyThis subcontract involves the full manufacture and assembly of five Circuit Card Assemblies for prime contractors supporting DLA Mechanicsburg projects. The work must be performed according to Cage Code 1EG52 and reference ROF61205/4, with all assemblies marked in compliance with MIL-STD-130, REV N. The selected provider is required to utilize SMT and through-hole equipment and maintain strict ESD protection protocols to deliver five completed and tested units. Eligible candidates must be an OCM/OEM, a QPL/QML source, or an authorized distributor holding CMMC Level 1 certification. This opportunity falls under NAICS code 334412 and is managed by the Department of Defense through SPRMM1 DLA Mechanicsburg. Responses are due by November 27, 2026.

SPRMM1 DLA Mechanicsburg

POSTED

DEADLINE

Solicitation # N0010426QQA90

Solicitation N0010426QQA90, issued by the Navsup Weapon Systems Support Mech, is a request for the manufacture and procurement of a Circuit Card Assembly. The requirement specifies that the item must conform to the design represented by Cage Code 53711, reference number 6166858, and must be physically identified in accordance with MIL-STD-130, Rev N. The contract is issued as a buy, with the resulting award to be executed bilaterally. All freight is designated as FOB Origin, and accelerated delivery is encouraged. Government source inspection is required, and the contractor is responsible for maintaining all inspection records for 365 calendar days following final delivery. Offerors who are not the original equipment manufacturer must provide official authorization from the OEM to be considered for award. The solicitation incorporates various federal regulations, including the Buy American-Balance of Payments Program and Small Business Subcontracting plans. Packaging must comply with MIL-STD 2073. While the initial response deadline was listed as February 1, 2027, Amendment 0002 has extended the deadline for the receipt of offers to 4:30 PM local time on April 30, 2026. All proposals must be submitted to the NAVSUP office in Mechanicsburg, Pennsylvania, and must include acknowledgment of all amendments.

Navsup Weapon Systems Support Mech

POSTED

DEADLINE

Solicitation # SPRMM126QHC38

This solicitation, issued by DLA Mechanicsburg under number SPRMM1-26-Q-HC38, seeks the manufacture and delivery of the KIT,CCA,CONROLLER (NIIN 016603072). The requirement specifies that the item must conform to the designs represented by Cage Codes 53711 and 30SS9. Delivery is required as soon as possible (ASAP) with FOB Destination terms. The government intends to make a single award based on a best-value determination where past performance, evaluated via the Supplier Performance Risk System (SPRS), is considered more important than price. The contract mandates strict adherence to quality and marking standards, including MIL-STD-130 for physical identification and MIL-STD-2073 for packaging. Inspection and acceptance will occur at the origin, with the contractor remaining responsible for all inspection requirements. Invoicing and receiving reports must be submitted electronically through the PIEE-WAWF system. Additional compliance requirements include Item Unique Identification (IUID) per DFARS 252.211-7003, cybersecurity protections under DFARS 252.204-7012, and various Buy American and small business representations.

SPRMM1 DLA Mechanicsburg

POSTED

DEADLINE

Solicitation # SPRMM126QGF14

Solicitation SPRMM1-26-Q-GF14, issued by NAVSUP Weapons Systems Support for the Department of Defense, is a request for the manufacture and delivery of one Multi-Purpose Serve (NSN 5998-01-705-5773). The procurement is a fixed-price effort requiring the contractor to adhere to strict quality assurance and physical identification standards, specifically MIL-STD-130 Rev N. While drawings and technical data are unavailable, the item must match the design represented by Cage Code 4NCQ6. Offerors who are not the original equipment manufacturer must identify the OEM and their CAGE code, and authorized distributors must provide signed proof of authorization on company letterhead. Quotes must remain valid for 60 days and may require an informal cost breakdown to determine fair and reasonable pricing. The contract mandates rigorous packaging and marking protocols per MIL-STD-2073 and MIL-STD-129, with specific requirements for CONUS and OCONUS shipments and electrostatic discharge protection where applicable. Inspection and acceptance are conducted at the source, and the contractor is responsible for maintaining inspection records for 365 days post-delivery. Administrative requirements include the mandatory use of PIEE-WAWF for the electronic submission of combined invoice and receiving reports. Evaluation of offers will be based on the Supplier Performance Risk System (SPRS), focusing on item, price, and supplier risk, with a strict prohibition on the use of additive manufacturing unless specifically authorized. Delivery is designated for the DLA Distribution DDSP New Cumberland facility in Pennsylvania.

SPRMM1 DLA Mechanicsburg

POSTED

DEADLINE

Solicitation # SPRMM127QKA49

Solicitation SPRMM127QKA49, issued by NAVSUP Weapon System Support for the Department of Defense, seeks the manufacture and delivery of five Circuit Card Assemblies (NSN 5998-20-007-0323). The required items must conform to the design represented by Cage Code 1EG52, reference number ROF61205/4. Award will be determined based on the Lowest Price Technically Acceptable (LPTA) criteria, with the government utilizing the Supplier Performance Risk System (SPRS) to evaluate item, price, and supplier risk. Offerors who are not the Original Equipment Manufacturer (OEM) must identify the OEM and their associated CAGE code. The contract mandates strict adherence to quality and packaging standards, including MIL-STD-130 for physical identification and MIL-STD-2073-1 for preservation and packaging. Specific requirements include electrostatic discharge protection per ANSI/ESD S20.20-2021 for sensitive items and marking in accordance with MIL-STD-129. Inspection and acceptance will occur at the origin. Contractors are required to use the Wide Area WorkFlow (WAWF) system for electronic submission of invoices and receiving reports. Additionally, the solicitation specifies a CMMC Level 1 self-certification requirement and prohibits the procurement of assemblies manufactured, assembled, or delivered from a Covered Nation.

SPRMM1 DLA Mechanicsburg

POSTED

DEADLINE

Solicitation # SPRMM126RHB33

Solicitation SPRMM126RHB33 is a firm-fixed-price procurement issued by DLA Mechanicsburg for the manufacture of Module Assembly, Rim (NSN 5998-01-625-8080). The requirement is unrestricted and has undergone several amendments, ultimately increasing the total quantity to 37 units and extending the offer due date to January 29, 2027. Award will be granted to the responsible offeror providing the lowest priced, technically acceptable offer, with evaluations incorporating the Supplier Performance Risk System to assess item, price, and supplier risk. The contract mandates strict adherence to quality and security standards, requiring contractors to maintain a Secret level security clearance in accordance with DD Form 254 and comply with ANSI/ESD S20.20 for electrostatic discharge control. All deliverables must be physically identified per MIL-STD-130 and packaged according to MIL-STD-2073-1 and MIL-STD-129. Inspection is conducted at the origin by the Contract Administration Office, and the contractor must maintain inspection records for 365 days post-delivery. Administrative requirements include the electronic submission of receiving reports and invoices through the Wide Area WorkFlow system.

SPRMM1 DLA Mechanicsburg

POSTED

DEADLINE

F-16 Circuit Card Assembly

Solicitation # SPRHA4-27-R-0952

Ut DLA Aviation At Ogden

POSTED

DEADLINE

Solicitation # N0038327QAA13

Solicitation N00383-27-Q-AA13, issued by NAVSUP Weapon Systems Support Philadelphia, is a request for quotations for the overhaul, upgrade, repair, testing, and inspection of various printed circuit boards and assemblies. The scope includes five specific line items, including printed circuit boards and circuit card assemblies with NSNs 5998-01-512-3463, 015123482, 015215180, 1680-01-619-4547, and 5998-01-620-1746. The objective is to return these assets to a Ready for Issue condition. The government intends to make a single award based on a combination of price and past performance, with past performance weighted as the more important factor. The contractor is responsible for providing all labor, materials, and tooling, with a strict prohibition on the use of MIL-W-81381 wire in favor of SAE-AS22759 series wire. Key performance requirements include adherence to Repair Turnaround Times and the use of the Commercial Asset Visibility system for reporting. Quality standards are rigorous, requiring compliance with ISO 9001/SAE AS9100 and specific calibration standards such as ANSI/NCSL Z540.3. The contract includes detailed provisions for Beyond Economical Repair and Over and Above Repair determinations, both of which require written concurrence from DCMA. Packaging must meet MIL-STD-2073-1 and MIL-STD-129 standards, and all invoicing must be processed electronically through the Wide Area Workflow system.

Navsup Weapon Systems Support

POSTED

about 22 hours ago

DEADLINE

in 29 days

General Info

Agency

Department Of Defense → Pa DLA Aviation At Philadelphia

NAICS

334412 - Bare Printed Circuit Board Manufacturing

Place of Performance

Set-Aside

NONE

Documents

SPRPA125QEP51.pdf

AI Contract Breakdown

Uniform Contract Format

Contract not broken down yet

CLEATUS splits the solicitation into Uniform Contract Format (UCF) sections: scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseClosed

PostedJul 8

Solicitation

Response DeadlineAug 7

Deadline has passed

Submission Closed

08/07/2025, 08:30:00 PM UTC

Find active opportunities like this

Get full access to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyDepartment Of Defense → Pa DLA Aviation At Philadelphia

Contacts1 person available

OfficePHILADELPHIA, PA, 19111-5098, USA

Organization / AgencyDepartment Of Defense → Pa DLA Aviation At Philadelphia

Office AddressPHILADELPHIA, PA, 19111-5098, USA

Contacts

contact@example.gov

+1 (555) 000-0000

Full Description

CONTACT INFORMATION|4|code: N52214.16|GV1|+81 0298421211 Ext. 4375|POC: contact@example.gov| ITEM UNIQUE IDENTIFICATION AND VALUATION (JAN 2023)|19|0001AA|10 Each|365 Days||||||||||||||||| INSPECTION OF SUPPLIES--FIXED-PRICE (AUG 1996)|2||| HIGHER-LEVEL CONTRACT QUALITY REQUIREMENT|8||||||||| FMS DELIVERY AND SHIPPING INSTRUCTIONS|3|||code: N52214.16| WIDE AREA WORKFLOW PAYMENT INSTRUCTIONS (JAN 2023)|16|Invoice and Receiving Report (Combo)|N/A|SPRPA1|TBD|TBD|N/A|N/A|N/A|N/A|N/a|N/a|N/a|N/a|N/a|n/a|| NAVY USE OF ABILITYONE SUPPORT CONTRACTOR - RELEASE OF OFFEROR INFORMATION (3-18))|1|| VALUE ENGINEERING (JUN 2020)|3|||| INTEGRITY OF UNIT PRICES (NOV 2021)|1|| EQUAL OPPORTUNITY FOR VETERANS (JUN 2020)|4||||| EQUAL OPPORTUITY FOR WORKERS WITH DISABILITIES (JUN 2020)|2||| TRANSPORTATION OF SUPPLIES BY SEA (OCT 2024)|2||| BUY AMERICAN-FREE TRADE AGREEMENTS-BALANCE OF PAYMENTS PROGRAM-BASIC (FEB 2024)|11|||||||||||| ALTERNATE A, ANNUAL REPRESENTATIONS AND CERTIFICATIONS (OCT 2024)|13|||||||||||||| BUY AMERICAN-FREE TRADE AGREEMENTS-BALANCE OF PAYMENTS PROGRAM CERTIFICATE-BASIC (FEB 2024))|5|||||| BUY AMERICAN--BALANCE OF PAYMENTS PROGRAM (FEB 2024)|1|| ROYALTY INFORMATION (APR 1984)|1|| ANNUAL REPRESENTATIONS AND CERTIFICATIONS (MAR 2025)(DEVIATION 2025-O0003 AND 2025-O0004))|12|334412|750||||||||||| FACSIMILE PROPOSALS (OCT 1997)|1|| NOTICE OF PRIORITY RATING FOR NATIONAL DEFENSE, EMERGENCY PREPAREDNESS, ANDENERGY PROGRAM USE (APR 2008))|2||| This solicitation is being issued under the Emergency Acquisition Flexibilies Authorities (EAF) also known as the Special Emergency Procedures Authority (SEPA). No drawings are available for this request for quotation. 1. SCOPE 1.1 . Markings shall be in accordance with MIL-STD-130. 2. APPLICABLE DOCUMENTS - NOT APPLICABLE 3. REQUIREMENTS The contractor shall maintain a quality control system which meets the requirements of Mil-I-45208A, Mil-Q 9858,ISO-9000 / 9001 / 9002 or equivalent. RESPONSIBILITY FOR INSPECTION: Unless otherwise specified, the contractor is responsible for the performance of all inspection requirements as specified herein. Except as otherwise specified, the contractor may use his own or any other facility suitable for the performance of the inspection requirements specified herein. PROCEDURES:The contractor shall prepare and maintain Quality Control Documentation, test and repair procedures, and inspection procedures which shall be made available to the Government for review and approval. The procedures shall include sequential diagrams of the test, repair, and inspection process, as well as the performance spcifications to perform the procedures. QUALITY ASSURANCE PROGRAM PLAN: The contractor shall develop, implement and maintain a Repair Quality Plan in compliance with the requirements of Mil-I-45208A, Mil-Q-9858, ISO,9000 / 9001 / 9002, or equvalent.The plan shall define the specific methods by which compliance with contractual requirements will be assured. All quality assurance data shall be provided to the Government for review and approval upon request. PURCHASED MATERIAL CONTROL: The contractor shall establish and maintain a system of control over purchased material which shall assure that the necessary requirements of this contract are included. in all sub contract agreements. A parts control system shall establish a record of performance for each purchased and internally manufactured part and shall be used to evaluate continued use of the source. The contractors control system shall be in compliance wil either Mil-I 45208A/Mil-Q-9858 or equivalent Quality Quality Assurance Standared.(ISO/AS:9000, 9001, 9002). RECEIVING INSPECTION OF PURCHASED MATERIAL: Purchased items shall be inspected upon receipt at the contractors facility to assure conformance with all requirements of the Technical Data Package (TDP). Evidence of such inspections shall be maintained for Government review at least twelve (12) months following acceptance of the end item. Inspection reports shall be maintained by the contractor. The inspection report shall, at a minimum, include a record of all dimensional data (coordinate/positional), material, finish, and process with appropriate pass/fail criteria, such ascertifications, and actual dimensional readings. FAILURE ANALYSIS AND CORRECTIVE ACTION:All failure analysis and corrective action reports/plans shall be submitted to the Government. NONCONFORMING MATERIAL:The contractor shall establish an effective system for controlling nonconforming material including procedures for identification, segregation, and disposition. CONTRACTOR INTERNAL REVIEW BOARD (IRB):IRB authority is delegated to the contractor for this contract only. The IRB may be used only for disposition of materials exhibiting minor non-conformances, scrap or rework to return a part to conformance with drawings or specifications as authorized by the approved repair procedures.IRB shall not use "AS-IS" disposition. A complete file of IRB actions shall be maintained for review by the Government for concurrance of classification. MATERIAL REVIEW BOARD (MRB):Formal MRB authority for disposition of "AS-IS"and for minor non-conformances is retained by the Government. The contractor shall submit the appropriate request for Variance via the DCMC to the NAVSUP Contracting Officer. RESPONSIBILITY FOR COMPLIANCE: All items must meet all requirements of this Statement of Work. The inspection requirements set forth in this SOW shall become part of the contractors overall inspection system or quality program. The absence of any inspection requirements in the SOW shall not relieve the contractor of the responsibility of assuring that all Government equipment submitted for acceptance comply with all requirements. Sampling in quality conformance does not authorize submission of known defective items, either indicated or actual, nor does it commit the procuring activity to acceptance of any defective items. REPAIR ASSESSMENT TESTING: The Government may select samples of the Contract Line Items (CLINS) which have completed repair and have been accepted by the Government representative for the purpose of conducting performance testing, environmental testing, and quality conformance examination in a repair assessment test program. A quantity of CLIN's may be randomly selected from each quaterly repair production completion for shipment to the CFA or other Government designated location to conduct this testing. RECORDS OF DATA COLLECTION: The contractor shall maintain a historical record file to contain copies of applicable data and documents for individual CLIN's and assemblies by CLIN serial number. The historical record file shall include,but not be limited to the following types of historical records: Receipt inspection documentation. Repair shop travelers or repair cards. Parts replacement records. Parts inspection data before and after repair as applicable. Acceptance test data. QA personnel shall maintain a complete receipt inspection,test, repair re-test, history card for each item processed. This information shall be made available to the Government upon request. 4. QUALITY ASSURANCE PROVISIONS - NOT APPLICABLE. 5. PACKAGING- MIL-STD 2073 PACKAGING APPLIES AS FOUND ELSEWHERE IN THE SCHEDULE 6. NOTES - NOT APPLICABLE