Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, September 30 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

Electronic Module Repair and Modification Services

Active

Response Deadline10/22/2026, 08:30:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract for Electronic Module Repair and Modification Services supports NAVSUP WSS Navy projects through the teardown, evaluation, repair, and modification of Electronic Module, S (NSN 5963-01-616-5982). The contractor is responsible for disassembling modules to identify failures and executing technical repairs to ensure operational requirements are met. Key compliance requirements include providing MSDS for hazardous materials according to OSHA and FED STD 313 standards, utilizing electronics diagnostic equipment, and maintaining UID reporting capabilities. The project is managed by the Department of the Navy under the Navsup Weapon Systems Support Mech agency, with performance located in Mechanicsburg, Pennsylvania. This is an SBA set-aside opportunity under NAICS code 811212. The solicitation was posted on September 22, 2026, with a response deadline of October 22, 2026.

General Info

Navy subcontract for electronic module repair and modification services in Mechanicsburg, Pennsylvania.

Agency

Department Of The Navy → Navsup Weapon Systems Support MechView Agency

NAICS

811212 - Computer and Office Machine Repair and MaintenanceView NAICS

Place of Performance

MECHANICSBURG, PA, 17050-2411, USA

Set-Aside

SBA

Documents

This scope was carved out of N0010426QNF25.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

ELECTRONIC MODULE,S — 5963016165982 — N0010426QNF25

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedSep 22

subcontract

Response DeadlineOct 22

Submission deadline

Response Deadline

10/22/2026, 08:30:00 PM UTCin 30 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of The Navy → Navsup Weapon Systems Support Mech

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of The Navy → Navsup Weapon Systems Support Mech

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Performs teardown, evaluation, repair, and modification of Electronic Module, S (NSN 5963-01-616-5982) for prime contractors on NAVSUP WSS Navy projects. Disassembles modules to identify failures, executes technical repairs to meet operational requirements, and provides MSDS for hazardous materials per OSHA/FED STD 313. Requires electronics diagnostic equipment and UID reporting capabilities. Delivers repaired and modified modules.

Similar Contracts

Same NAICS industry code

OMR Scanner Maintenance, Calibration, and Technical SupportThis subcontract focuses on providing ongoing maintenance, calibration, and technical support for Scantron scanning hardware and test-scoring software used by prime contractors on City of Houston Permitting Center projects. The scope of work includes calibrating OMR sensors to ensure accurate mark detection and utilizing Scantron-specific diagnostic tools to troubleshoot equipment failures. The service provider is responsible for delivering maintained hardware, detailed support logs, and necessary software updates. This opportunity is associated with NAICS code 811212 and is being managed by the City of Houston in Texas, with a response deadline of October 1, 2026.

City of Houston

POSTED

about 15 hours ago

DEADLINE

XL-200M Extended Warranty and Service Assistance

W7M1 Uspfo Activity Dc Arng

POSTED

about 17 hours ago

DEADLINE

Interconnect PWA Repair ServicesThis subcontract for the Department of the Navy, specifically Navsup Weapon Systems Support, involves the repair and restoration of 35 Interconnect PWAs under NSN 6150-01-577-3466. The scope of work includes performing diagnostic testing to identify defective components, replacing faulty electronics, and restoring all assemblies to Ready for Issue condition. All deliverables must include DLR labels and CAV RP reporting. The service provider is required to utilize electronic testing equipment and soldering stations while maintaining NIST SP800-171 cybersecurity compliance. Performance of the contract is located in Philadelphia, Pennsylvania, under NAICS code 811212. The response deadline for this opportunity is October 22, 2026.

Navsup Weapon Systems Support

POSTED

DEADLINE

Repair and Overhaul of COMPUTER SYSTEM DIG

Navsup Weapon Systems Support Mech

POSTED

DEADLINE

Electronic Component Repair and Overhaul ServicesThis subcontract for Electronic Component Repair and Overhaul Services supports the Department of the Navy's Navsup Weapon Systems Support. The contractor is responsible for the teardown, evaluation, repair, modification, and testing of electronic components, specifically focusing on returning NSN 5998-01-617-6920 V2 components to Ready for Issue condition. This process involves utilizing specialized test and tooling equipment and applying Depot Level Repairable labels to both the units and their shipping containers. The work is performed in Philadelphia under NAICS code 811212. Interested parties must respond by October 22, 2026, to provide these essential repair and overhaul services for prime contractors on NAVSUP WSS projects.

Navsup Weapon Systems Support

POSTED

DEADLINE

Electronic Circuit Card Assembly Repair Services

Navsup Weapon Systems Support Mech

POSTED

DEADLINE

Electronic Component Repair (Circuit Card Assembly)

Navsup Weapon Systems Support Mech

POSTED

DEADLINE

Power Drive Unit (PDU) Teardown and Repair ServicesThis subcontract with Navsup Weapon Systems Support involves the teardown, evaluation, repair, and modification of Power Drive Units, specifically NSN 1680-01-599-1114, for Department of the Navy aviation projects. The selected provider must perform technical evaluations of internal components, execute repairs according to operational specifications, and implement Unique Item Identifiers. All work must be supported by precision calibration equipment that complies with ISO 10012 or NCSL Z540.3 standards. The final deliverables for this project include two certified, repaired units and accompanying evaluation reports. Performance will take place in Philadelphia, Pennsylvania. Interested parties must submit their responses by October 22, 2026, under NAICS code 811212.

Navsup Weapon Systems Support

POSTED

DEADLINE

Cursor Controller Repair and Modification ServicesThis subcontract for Cursor Controller Repair and Modification Services supports NAVSUP-WSS projects through the Department of the Navy. The scope of work involves the teardown, evaluation, repair, and modification of Cursor Controllers under NSN 5998-01-702-9723. Key technical requirements include disassembling units to identify failures, replacing faulty electronic components, performing soldering, and utilizing precision diagnostic tools to ensure functionality aligns with original manufacturer specifications and drawings. The contractor is responsible for applying UID markings in compliance with DFARS 252.211-7003 and delivering fully tested units. Performance of these services will take place in Mechanicsburg, Pennsylvania. The opportunity was posted on September 22, 2026, with a response deadline of October 7, 2026, falling under NAICS code 811212.

Navsup Weapon Systems Support Mech

POSTED

DEADLINE

Repair and Overhaul of Color Entry Panel (NIIN: 015325323)This subcontract involves the technical repair and overhaul of Color Entry Panels (NIIN: 015325323) to support Department of the Navy aviation electronics projects. The contractor is responsible for restoring items to operational capacity in accordance with Cage Code 11263 and Reference Number 60319-1, while ensuring all physical identification and marking adhere to MIL-STD-130, REV N. The final deliverable is a fully repaired and functional Color Entry Panel. The project is managed by the Navsup Weapon Systems Support Mech and will be performed in Mechanicsburg, Pennsylvania. Due to the nature of the work, the contractor must possess specialized electronics diagnostic equipment and maintain CMMC compliance for the handling of Controlled Unclassified Information. The response deadline for this opportunity is October 22, 2026.

Navsup Weapon Systems Support Mech

POSTED

DEADLINE

Repair and Modification of SBC Assembly (NSN 5998-01-738-3140)This subcontract involves the teardown, evaluation, repair, and modification of SBC Assemblies under NSN 5998-01-738-3140 for prime contractors supporting U.S. Navy NAVSUPWSS projects. The contractor is responsible for conducting test, diagnostic, and evaluation activities within 45 days to either restore the assembly to operational status or determine if it is beyond economical repair. The work must be performed in accordance with Fly-By-Wire program standards and an approved Quality Assurance Manual for Level I, SUBSAFE, DSS-SOC, and FBW certifications. Final deliverables include a repaired, tested, and certified assembly. The project is managed by the Department of the Navy under NAICS code 811212, with the place of performance located in Mechanicsburg, Pennsylvania.

Navsup Weapon Systems Support Mech

POSTED

DEADLINE

CPU PWA Aircraft Component Repair and OverhaulThis subcontract for the Department of the Navy's Navsup Weapon Systems Support involves the technical overhaul, repair, and testing of CPU PWA units for aircraft projects. The scope of work includes inspecting units, performing component-level repairs and replacements on printed wiring assemblies, and reassembling the units to deliver 27 units in ready-for-issue condition. All work must be performed using specialized electronic test equipment and counterfeit detection systems. The project is based in Philadelphia and requires strict adherence to DFARS 252.246-7007, NIST SP 800-171, and DFARS 252.204-7012 compliance standards. Interested parties must submit responses by October 22, 2026, under NAICS code 811212.

Navsup Weapon Systems Support

POSTED

DEADLINE

More opportunities from Department Of The Navy → Navsup Weapon Systems Support Mech

Same awarding agency

Supply of Replacement Parts for COMPUTER SYSTEM DIG

Electrical Apparatus and Equipment, Wiring Supplies, and Related Equipment Merchant Wholesalers

POSTED

DEADLINE

Electronic Component Supply for CCA Repair

Electrical Apparatus and Equipment, Wiring Supplies, and Related Equipment Merchant Wholesalers

POSTED

DEADLINE

Air Starter Replacement Parts and ConsumablesThis subcontract, managed by the Department of the Navy's Navsup Weapon Systems Support Mech, involves the procurement of replacement parts, seals, bearings, and hardware for Air Starter NIIN 123775161. The contractor is responsible for sourcing OEM or approved equivalent aerospace-grade fasteners and turbine components to support prime contractors on DLA/Navy aviation projects. All deliverables must include certificates of conformance and strictly adhere to the Buy American-Balance of Payments Program under DFARS 252.225-7000. The project falls under NAICS code 336412 and is centered in Mechanicsburg, Pennsylvania. Interested parties must respond by September 30, 2026, to provide the required kits of replacement parts. This effort ensures the continued operational readiness of aviation systems through the supply of high-quality, compliant aerospace components.

Aircraft Engine and Engine Parts Manufacturing

POSTED

DEADLINE

Air Starter Repair and Overhaul ServicesThis subcontract for Air Starter Repair and Overhaul Services involves the technical repair and overhaul of Air Starters (NIIN: 123775161) to support prime contractors on DLA and Navy aviation projects. The scope of work includes the disassembly, inspection, cleaning, and reassembly of units using precision measurement tools and testing rigs, all performed in accordance with Department of Defense technical orders and drawings to deliver certified serviceable components. The project is managed by the Department of the Navy under the Navsup Weapon Systems Support Mech agency, with performance taking place in Mechanicsburg, Pennsylvania. Under NAICS code 336412, the contract requires strict adherence to DFARS 252.204-7012 cybersecurity compliance standards. The response deadline for this opportunity is September 30, 2026.

Aircraft Engine and Engine Parts Manufacturing

POSTED

DEADLINE

Component Parts & Seal SupplyThis subcontract, managed by the Department of the Navy's Navsup Weapon Systems Support Mech, involves the procurement of replacement parts, seals, gaskets, and sub-components necessary for repairing Actuator Assembly NIIN 016338763. The contract requires the provision of flight-certified or military-spec components, which may be delivered as individual parts or as comprehensive kits. All supplied materials must be U.S.-made or sourced from qualifying countries in accordance with DFARS 252.225-7020, and the provider must supply certification of authenticity and origin. Performance for this contract is based in Mechanicsburg, Pennsylvania, with a response deadline of October 22, 2026.

All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

DEADLINE

Actuator Repair & Overhaul ServicesThis subcontract with the Department of the Navy, specifically Navsup Weapon Systems Support Mech, involves the technical repair and overhaul of Actuator Assemblies under NIIN 016338763. The contractor is responsible for executing repairs in accordance with approved technical orders, drawings, and standards, ensuring that all serially managed reparables are provided with Unique Item Identifiers. The work requires the use of precision mechanical repair and testing facilities to deliver a fully certified Actuator Assembly. The project is based in Mechanicsburg, Pennsylvania, and falls under NAICS code 811210. Compliance with the Buy American and Trade Agreements Act is mandatory. The solicitation was posted on September 22, 2026, with a response deadline of October 22, 2026.

Electronic and Precision Equipment Repair and Maintenance

POSTED

DEADLINE

Display Touch Screen Repair and RefurbishmentThis subcontract with the Department of the Navy's NAVSUP Weapon Systems Support Mech involves the teardown, evaluation, repair, and modification of Display Touch Screens under NAICS code 334290. The contractor is responsible for disassembling units to identify failures, performing technical repairs on touch screen assemblies, and applying Unique Item Identifiers according to DoD standards. All work must be conducted in ESD-safe environments using specialized electronics diagnostic equipment to deliver one fully repaired and functional unit with NSN 5980-01-620-3051. The project is based in Mechanicsburg, Pennsylvania, with a response deadline of September 29, 2026. This effort supports prime contractors on NAVSUP projects to ensure critical display hardware is restored to operational specifications.

Other Communications Equipment Manufacturing

POSTED

DEADLINE

Switch Connector Assembly ManufacturingThis subcontract with the Department of the Navy, specifically Navsup Weapon Systems Support Mech, involves the manufacturing and supply of the Switch Connector Assembly, identified by NSN 5930-01-652-8207. The contractor is responsible for producing the assembly in strict accordance with Technical Data Package Version 003 and Individual Repair Part Ordering Data. Performance of the contract takes place in Mechanicsburg, Pennsylvania, under NAICS code 334418. To qualify, the provider must maintain a government-acceptable inspection system and ensure full CMMC compliance for the processing of Federal Contract Information and Controlled Unclassified Information. The primary deliverable is the completed physical Switch Connector Assembly intended for prime contractors on Navy hardware contracts. The solicitation was posted on September 22, 2026, with a response deadline of October 22, 2026.

Printed Circuit Assembly (Electronic Assembly) Manufacturing

POSTED

DEADLINE

Electronic Component Supply

Electrical Apparatus and Equipment, Wiring Supplies, and Related Equipment Merchant Wholesalers

POSTED

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS