Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →

This Sources Sought opportunity from Department Of Transportation was posted on September 25, 2020. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Elevator modernization and preventive service maintenance at five (5) FAA facilities

Closed
697DCK_5_FAA_LocationsFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 238290
New
Centennial JCC Panic Hardware Services (Electrical Room Egress Doors)
Solicitation # Panic Hardware (Electrical Room Egress Doors)
Management & Training Corporation is soliciting bids for the installation of commercial-grade panic hardware on electrical room egress doors at the Centennial Job Corps Center in Nampa, Idaho. The project requires the contractor to bypass internal lock mechanisms and install Grade I panic bars, exterior trim, rim cylinders, strikes, and door closers at five specific locations: the B-Cafeteria, CM-Men's Dorm, CW-Women's Dorm, D-Recreation, and F-Vocational. All work must comply with NEC 2023 Article 110.26(C)(3), NFPA 101 Life Safety Code, and the Americans with Disabilities Act. Performance requirements include a site survey to verify door dimensions and fire ratings, followed by a minimum of 10 consecutive cycle tests to ensure fail-safe operation. This is a fee-for-service subcontracting opportunity set aside for small businesses, including VOSB, SDVOSB, WOSB, and HUBZone certified entities. Bidders must submit a lump sum price and individual pricing per deficiency by December 1, 2026. Required submission documents include a bid sheet, a completed supplier packet with a W-9 and self-certification form, and three references for projects of similar scope. The contract is subject to various federal regulations, including FAR 52.222-4 for work hours and safety, and prevailing wage rates for building construction in Canyon and Gem Counties, Idaho, as specified in General Decision Number ID20250106. Final acceptance is contingent upon inspection by MTC at the designated point of delivery.
Management & Training Corporation/Centennial Job Corps Center

POSTED

about 4 hours ago

DEADLINE

in about 1 month
NAICS: 238290
New
SLED
Pauma Security Gate
Solicitation # 2026-27-06
Solicitation 2026-27-06 for the Valley Center Pauma Unified School District involves the fabrication and installation of automated, keypad-entry hinging steel security swing gates at entry and egress driveways in Valley Center, California. The project requires two powder-coated steel double swing gates, each 18 feet wide by 5 feet tall, and explicitly prohibits the use of chain link options. Key technical components include a mounted Knox switch with Fire Department filing, two entry remotes, gate hold timers, a mounted strobe detector for emergency vehicles, and a keypad similar to the Door King 1506-086. The contract value is capped at 1,000,000 dollars, and the award will be granted to the lowest responsive and responsible bidder. Eligible bidders must hold a California contractor's license C13 or C-61/D28 and comply with prevailing wage requirements and Department of Industrial Relations registration. The project mandates a payment bond for 100 percent of the total bid price and a DVBE participation goal of at least 3 percent. Required submissions include a comprehensive bid packet featuring non-collusion affidavits, Iran Contracting Act certification, and fingerprinting certifications. Performance must be coordinated with the Director of Maintenance and Operations, with work hours restricted to 7:00 am to 5:00 pm, Monday through Friday. Additionally, contractors must adhere to strict hazardous material standards and California Air Resources Board compliance, with the district maintaining the right to terminate the agreement upon 30 calendar days written notice.
Valley Center Pauma USD

POSTED

about 20 hours ago

DEADLINE

in 5 days
NAICS: 238290
New
SLED
Districtwide Elevator And Wheelchair Lift Service, Preventive Maintenance, And Repairs Maintenance Services
Solicitation # 27.004
The Hayward Unified School District is soliciting bids under solicitation number 27.004 for districtwide elevator and wheelchair lift service, preventive maintenance, and repairs. The selected contractor will be responsible for the systematic examination, maintenance, and repair of all owned or leased systems, including hydraulic, electrical, and mechanical components, to ensure they remain in safe and usable condition. This contract requires the provider to hold an active C-11 Elevator Contractor license from the State of California and comply with all local and state codes, including Title 24 of the California Code of Regulations. The award will be granted to the lowest responsive and responsible bidder based on the rates provided in the bid form. Performance of regular services typically occurs Monday through Friday during standard business hours, while emergency repairs must be available 24 hours a day, seven days a week. The contractor must provide a bid bond of at least 10 percent of the bid amount and subsequently provide payment and performance bonds upon award. Invoicing is conducted monthly, with a requirement that authorized materials be invoiced at no more than 15 percent above the vendor's cost. Key compliance requirements include paying prevailing wages per the California Labor Code, submitting to fingerprinting and felony conviction certifications, and maintaining a minimum one-year warranty on work. All contracts are governed by the laws of the State of California.
Hayward Unified School District

POSTED

about 21 hours ago

DEADLINE

in 19 days

General Info

NAICS

238290 - Other Building Equipment Contractors

Place of Performance

Dallas, TX, 75261, USA

Set-Aside

SBA

Documents

1

Attachment+No.+1+-+Security+Notice+to+Prospective+Offerors.doc

DOC

AI Contract Breakdown

Uniform Contract Format

Contract not broken down yet

CLEATUS splits the solicitation into Uniform Contract Format (UCF) sections: scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseClosed
Posted

Sources Sought

Response Deadline

Deadline has passed

Submission Closed

Find active opportunities like this

Get full access to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

Show more
AgencyDepartment Of Transportation → 697DCK Regional Acquisitions Svcs
Contacts1 person available
OfficeFORT WORTH, TX, 76177, USA
Office AddressFORT WORTH, TX, 76177, USA

Full Description

Show more
The Federal Aviation Administration (FAA) is seeking competent and qualified elevator modernization and maintenance contractors interested in providing offers for elevator modernization and full service maintenance requirements to improve elevator reliability within the agency. This elevator modernization and subsequent full-service maintenance requirement is at the following locations: Air Traffic Control Tower in Chesterfield, MO (SUS ATCT) Air Traffic Control Tower in Springfield, MO (SPI ATCT) Air Traffic Control Tower in Fayetteville, AR (FYV ATCT) Air Traffic Control Tower in Fort Worth, TX (FTW ATCT) Terminal Radar Approach Control in Fort Worth, TX (D10B TRACON) This is NOT a Screening Information Request (SIR) or Request for Proposal (RFP). See Section II for documentation required to be submitted and evaluated to determine which vendors receive the solicitation. SECTION I- ANTICIPATED REQUIREMENT SCOPE The contractor will be required to provide all labor, supervision, materials, supplies, and equipment to perform this work in accordance with the Performance Work Statement (PWS) and with all local, state, and federal laws. The Government does not anticipate changes to the PWS at this time, but may do so as deemed necessary by the Government. This is not a Screening Information Request (SIR) or Request for Proposal (RFP). Work will be done on an operational facility and the contractor shall comply with all procedures, rules and regulations of the facility authorities including limitations on equipment, allowable work hours, and other issues to ensure uninterrupted air traffic control operations. The North American Industry Classification System (NAICS) is 238290, Other Building Equipment Contractors. The small business size standard is $16.5 million. The project magnitude for this award is between $1,000,000.00 and $5,000,000.00. A site visit will be provided. The date, time, location, and point of contact will be provided with the solicitation package. The contractor receiving award is expected to perform at least 25% of the work utilizing their own employees. Contractors must have an active registration in System Award Management (SAM) before award can be made. Contractors can register at www.sam.gov/. SECTION II- GO/NO-GO SUBMISSION REQUIREMENTS Complete and return the Security Notice to Prospective Offerors (Attachment No. 1) Using the Past Experience-History form (Attachment No. 2), provide a listing of at least three (3) elevator modernization projects/contracts completed at CRITICAL FACILITIES*, in the past three (3) years, with contract values of at least $250,000. The offerors must have completed these modernization projects and must have performed the work as the prime contractor. *See Section IV-Definitions. The information provided may also be used as part of the responsibility determination. Responses must be emailed to contact@example.gov, no later than 5:00pm CST on 10/09/20. Please place "Attention: SUS, SPI, FVY, FTW, D10B Elevator Modernization Go/No-Go Submission- [offeror company name]" in the subject line of your email. Requests received after this date and time may or may not be honored. Failure to submit all required information may or may not deem the request for solicitation as non-responsive. SECTION III- EVALUATION CRITERIA AN OFFEROR MUST MEET THE FOLLOWING GO/NO-GO CRITERIA IN ORDER TO RECEIVE A SOLICITATION PACKAGE: Criteria "Go" Rating Standard (Standard is Met) Sensitive Security Information Form - Submitted a completed and signed Sensitive Security Information Form (Attachment No. 1.) Past Experience-History Information - Provided the completed Past Experience Form (Attachment No. 2), provide a listing of at least three (3) completed elevator modernization projects/contracts, as the prime contractor, at CRITICAL FACILITIES, in the past three (3) years, with contract values of at least $250,000.* *See Section IV-Definitions. The information may be used as part of the responsibility determination. Those offerors receiving "Go" Ratings on both criteria will be issued a solicitation. SECTION IV- DEFINITIONS: Completed: A contract/project will be considered complete if over 90% of the modernization portion of the contract/project is completed. The percentage of completion will be established by the customer/end user and not the offeror. Critical Facilities: Critical Facilities are those in which activities are performed which cannot be disrupted without at least a mild probability of endangerment or loss of human life. Critical Facility Examples: Federal Aviation Administration Airport Traffic Control Towers - Critical Facilities which provide Air Traffic Control. LOSS OF HUMAN LIFE MAY RESULT FROM SERVICE INTERRUPTION. Hospitals - Critical Facilities which provide life support care. LOSS OF HUMAN LIFE MAY RESULT FROM SERVICE INTERRUPTION. Other NON-Specified- Critical Facilities to include (but not limited to) such as Police/Fire Stations, Storage and Archive of Critical Records, Chemical, or Nuclear or Biological Repositories. SEVICE INTERUPTION WILL LIKELY CAUSE AT LEAST A MILD PROBABILITY OF ENDANGERMENT OR LOSS OF HUMAN LIFE. Non-Critical Facility Examples Hotels, Commercial Office Buildings, Retail Stores, etc. - facilities where interruption of service does not create at least a mild probability of endangerment or loss of human life. SECTION IV- PROCUREMENT STRATEGY The solicitation(s) resulting from this synopsis shall use a tradeoff evaluation in determining the successful offerors. Proposals will be evaluated and award made on the basis of both Non-price and Price considerations most advantageous to the Government. Non-price factors will be considered significantly more important than Price factors. All three Non-price factors (Past Performance, Modernization Approach, and Maintenance Capability) will be considered equally important. *** Any Offerors desiring to be held in consideration to receive a copy of the solicitation, and by extension, to be held in consideration for contract award, MUST respond to this Sources Sought announcement by the deadline specified. "This Notice is for informational purposes for Minority, Women-Owned and Disadvantaged Business Enterprises: The Department of Transportation (DOT), Office of Small and Disadvantaged Business Utilization, has a program to assist small businesses, small businesses owned and controlled by a socially and economically disadvantaged individuals, and women-owned concerns to acquire short- term working capital assistance for transportation-related contracts. Loans are available under the DOT Short Term Lending Program (STLP) at prime interest rates to provide accounts receivable financing. The maximum line of credit is $750,000. For further information and applicable forms concerning the STLP, call the OSDBU at +1 (555) 000-0000."

More opportunities from Department Of Transportation → 697DCK Regional Acquisitions Svcs

Same awarding agency

NAICS: 541330
New
Federal
Design Renovation, System Support Center (SSC), 3551 Combine St., Paso Robles, CA
Solicitation # 697DCK-27-R-00022A
The Federal Aviation Administration is seeking engineering design services for the renovation of a 4,992 square foot leased building to serve as a System Support Center located at 3551 Combine St., Paso Robles, California. This procurement, identified by solicitation number 697DCK-27-R-00022A, is a Total Small Business Set-Aside. The selected contractor will be responsible for developing permit-ready Mechanical, Electrical, Plumbing, Life Safety, and Fire Protection drawings based on provided Design Intent Drawings. Key deliverables include three full-size stamped construction permit drawings approved by the City of Paso Robles, a dedicated life safety sheet, and all necessary electrical load and hydraulic calculations. All work must comply with 2022 California Building Codes and local standards. The period of performance is 130 days from the issuance of the Notice to Proceed, with a potential option to extend services for up to six months. Award will be based on the best value, considering successful price negotiations and conformance with solicitation terms. Offerors must submit their proposals in PDF or Word format to Linda Hennequant by November 12, 2026, ensuring the solicitation number is included in the subject line. Submissions must include a past performance record of at least three relevant projects completed within the last five years. Invoicing for this contract will be managed electronically through the Delphi eInvoicing web portal.
Engineering Services

POSTED

about 22 hours ago

DEADLINE

in 15 days
View Details
NAICS: 325992
Federal
Printer Consumables for the Strategic Sourcing for the Acquisition of Various Supplies and Equipment (SAVES) Program
Solicitation # 697DCK-25-R-00368
The Federal Aviation Administration (FAA) Office of Information and Technology is seeking a single qualified small business to establish an agency-wide indefinite delivery indefinite quantity (IDIQ) contract for toner and printer consumables under the Strategic Sourcing for the Acquisition of Various Equipment and Supplies (SAVES) program. This total small business set-aside, under NAICS 325992, covers over 750 items from specific original equipment manufacturers, including Brother, Canon, Dell, Epson, HP, Lexmark, Okidata, and Xerox. The contract features a five-year period of performance from February 19, 2027, to February 18, 2032, consisting of one base year and four one-year ordering periods, with a minimum ordering obligation of 1,000 dollars. Award will be made to the Lowest Priced Technically Acceptable (LPTA) offeror. Evaluation is based on non-price factors, including technical acceptability and past experience, and a price proposal evaluated via a discount-based model against manufacturer suggested retail prices. Proposals must be submitted in three volumes: Business, Technical, and Price. Following several amendments, the final proposal due date is November 5, 2026, at 5:00 PM ET. Deliveries are required for CONUS locations to specific delivery points, with OCONUS delivery permitted subject to approved shipping charges. Contractors must maintain a quality system ensuring high responsiveness for quote requests and customer service.
Photographic Film, Paper, Plate, Chemical, and Copy Toner Manufacturing

POSTED

8 days ago

DEADLINE

in 8 days
View Details
NAICS: 5417
Federal
BEYOND Phase 2
Solicitation # 697DCK-26-R-00423
Screening Information Request 697DCK-26-R-00423 is a competitive selection process for the Federal Aviation Administration's BEYOND Phase 2 program, managed by the Unmanned Aircraft Systems and Advanced Air Mobility Integration Office. This initiative seeks to award up to eight Other Transaction Agreements (OTAs) to State, Local, Tribal, or Territorial (SLTT) governments to test and evaluate emerging aviation concepts. The program focuses on four programmatic areas—infrastructure, scalability, safety, and automation—and five operational challenges, including controlled airspace, on-airport operations, and cross-border flights. This is a non-funded process where participants are responsible for their own costs, and the period of performance extends through September 30, 2029. Eligible offerors must be instrumentalities of an SLTT government, provide a letter of attestation, and maintain an active registration in the System for Award Management (SAM). Proposals are evaluated on a pass/fail basis for eligibility, followed by a holistic confidence rating of the Technical Submission Package based on goal specificity, innovation, alignment with FAA priorities, and the use of SMART methodology. Following several extensions, the final proposal submission deadline is October 30, 2026, at 3:00 pm ET. Submissions must be sent via email in PDF format, adhering to strict page limits and formatting requirements, including a 26-page limit for the main technical narrative.
Scientific Research and Development Services

POSTED

8 days ago

DEADLINE

in 1 day
View Details

Earlier notices in this NAICS code

Posted before this notice, open and closed

Find Active Opportunities Like This

Get AI-powered intelligence on the opportunities still open

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 750+ contractors already using CLEATUS