Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, October 28 at 2:00 PM ET

Register Free →

This Solicitation opportunity from Government of Canada was posted on December 10, 2025. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Elevator Services – Atlantic Region

Closed
21207-26-5165313International

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 811310
New
Kubota M8200 Clutch Replacement
Solicitation # kubota-m8200-clutch-replacement
Management & Training Corporation is soliciting lump sum bids for the clutch replacement of a Kubota M8200 tractor with front wheel assist, located at the Earle C. Clements Job Corps Center in Morganfield, Kentucky. The scope of work requires the contractor to provide all labor, transportation, tools, and materials to diagnose and repair the clutch assembly and power take-off system. Key technical requirements include replacing friction discs, bearings, oil seals, and O-rings, as well as resurfacing the flywheel and replacing hydraulic pipes and filters as necessary. All work must be performed according to manufacturer specifications and verified through operational testing under load before final acceptance by the Facility Maintenance Department. This solicitation is set aside for small businesses, including VOSB, SDVOSB, WOSB, and HUBZone certified firms, under NAICS code 811310. Interested bidders must submit a bid sheet, completed supplier packet (including W-9 and self-certification), and proof of insurance to Angie Mahoney by November 3, 2026, at 3:00 PM CST. Award will be based on best value. The contract incorporates various Federal Acquisition Regulation clauses, including requirements for combating trafficking in persons, Buy American compliance, and adherence to Service Contract Act wage determinations for Kentucky. Final deliverables must include a summary of diagnostic findings, an itemized list of parts and services, and applicable warranty documentation.
Earle C. Clements Job Corps Center

POSTED

about 8 hours ago

DEADLINE

in 7 days
NAICS: 811310
New
SLED
ANNUAL ROTATING EQUIPMENT INSPECTION, TESTING, REPAIR, RECONDITIONING AND STORAGE SERVICES
Solicitation # 2026-RFP-130
Lakeland Electric is soliciting proposals under RFP 2026-RFP-130 to establish a pool of qualified contractors for the annual inspection, testing, repair, reconditioning, and storage of critical rotating equipment at the McIntosh and Larsen Power Plants. The scope of work covers a wide range of assets, including low- and medium-voltage AC/DC electric motors and circulating water and condensate pumps. Required services include clean inspection tests, troubleshooting, motor rewinding, dynamic field balancing, laser alignment, and vibration analysis. Additionally, the selected contractors must provide logistics support, including pickup, delivery, and secure indoor storage with ongoing preservation activities such as shaft rotation and lubrication. Proposals are due by 3:00 pm on October 30, 2026, via the OpenGov portal. Award decisions will be based on a 100-point scoring system evaluating pricing (30%), qualifications and experience (25%), technical and facility capabilities (25%), service approach and response (15%), and past performance (5%). Mandatory submittals include a signed W-9, Florida Sunbiz registration, a notarized Hold Harmless Indemnification Agreement, and a Human Trafficking Affidavit. Contractors must adhere to strict safety standards, including OSHA regulations for crane operations and powered industrial trucks, and must certify compliance with drug-free workplace and suspension and debarment regulations.
LE - Production - MPP

POSTED

about 15 hours ago

DEADLINE

in 3 days

AI Contract Overview

Show more

The Correctional Service of Canada is seeking a contractor to provide comprehensive inspection, testing, maintenance, repair, and upgrade services for elevating devices across five facilities in the Atlantic Region. These locations include the Atlantic Institution and Dorchester Penitentiary in New Brunswick, Springhill Institution and Nova Institution in Nova Scotia, and the Newfoundland and Labrador Community Correctional Center in St. John's. The primary objective is to ensure the health and safety of staff, inmates, and visitors through systematic equipment maintenance and the use of genuine manufacturer replacement parts. The selected contractor must provide 24/7 emergency response and maintain a well-stocked service vehicle to minimize equipment downtime. Key responsibilities include coordinating with Provincial Inspection Authorities, maintaining approved on-site logbooks, and submitting detailed digital service reports. This standing offer is scheduled to run from March 1, 2026, to February 28, 2027, with options for four additional one-year renewals. The procurement is open to Canadian suppliers and applicable trading partners under the Canadian Free Trade Agreement, with the contract awarded to the lowest priced compliant bid.

General Info

Maintenance and repair of elevating devices at five Atlantic Region correctional facilities.

Documents

1

Solicitation 21207-26-5165313 - Elevator Services Atlantic Region

PDF, High priority: read this firstrfp
High

AI Contract Breakdown

Uniform Contract Format

Contract not broken down yet

CLEATUS splits the solicitation into Uniform Contract Format (UCF) sections: scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseClosed
Posted

Solicitation

Response Deadline

Deadline has passed

Submission Closed

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

Show more
AgencyGovernment of Canada → Correctional Service of Canada
Contacts1 person available
OfficeN/A
Office AddressN/A
Contacts
Isabelle BasquePoint of Contact

Full Description

Show more
Elevating device inspection and maintenance. This requirement is for: The Correctional Service of Canada, Atlantic Region, at the following locations: ? Atlantic Institution located in the town of Renous, New Brunswick ? Dorchester Penitentiary located in Dorchester, New Brunswick ? Springhill Institution located in Springhill, Nova Scotia ? Nova Institution located in Truro, Nova Scotia ? Newfoundland and Labrador Community Correctional Center in St.-John’s Newfoundland and Labrador Trade agreement: Canadian Free Trade Agreement (CFTA) Canada free trade agreements with Chile/Colombia/Honduras/Panama, Canada-Peru Free Trade Agreement Policy on Reciprocal Procurement: This solicitation is open only to Canadian suppliers and to Suppliers of an applicable trading partner. Competitive Procurement Strategy: Lowest priced compliant bid Set-aside under the Procurement Strategy for Indigenous Business: This procurement is not subject to any set-asides for Indigenous Suppliers. Comprehensive Land Claim Agreement: This procurement is not subject to a Comprehensive Land Claims Agreement. Security Requirements: This standing offer does not include security requirements. Nature of Requirements: The following is a summary of the statement of work for this requirement. The Correctional Service Canada has a requirement to inspect, service and repair elevators in its facilities. The work will involve the following: 1.1 Background The department has a need to maintain the elevators in the institutions for health and safety of staff, inmates and visitors. 1.2 Objectives: The work the Contractor must perform under this Standing Offer Agreement includes but is not limited to the provision of all labour, materials, tools, supervision and equipment necessary for inspection, testing, maintenance, repair and upgrade of elevating devices. 1.3 Tasks: The Contractor must regularly and systematically maintain all equipment at the frequency specified in the Elevator Equipment table located in the Statement of Work. The Contractor must provide the Departmental Representative with a telephone number at which it or its representative can be contacted 24 Hours per day, 7 days a week. The Contractor must respond to service calls 24 Hr per day, 7 days a week. For calls outside regular work hours (from 5:00 PM to 7:30 AM, Monday to Friday, weekends and statutory holidays), the Contractor must contact the Departmental Representative on the first working day following the call to obtain a work order number. The Contractor must report to the site with a service vehicle that is well stocked with replacement parts to carry out repairs on the elevator equipment in use in these facilities. The Contractor must remove and dispose of debris, used and obsolete material at the end of each day on which work is performed that produces such waste. The Contractors must co-ordinate with and assist the Provincial Inspection Authority during equipment inspection and testing when required. Upon arrival to the site facility, the Contractor’s technicians must present identification and sign into the institutional Visitor’s Register at the Principal Entrance. The Contractor must submit a complete tool list upon arrival on-site. Any missing or lost tools must be reported to the Correctional Manager desk by the Contractor. The Contractor must provide to the Department Representative, after each visit, a service report containing details of all work performed and record all interventions into the logbook the Contractor must supply for each elevating device. When applicable, the Contractor must provide a list of defects or deficiencies, or both discovered during the visit with recommended corrective actions and associated costs. The Contractor must provide all maintenance activities report to the following email: contact@example.gov. The Contractor must submit all documents within the report in Adobe Acrobat PDF format. Replacement Parts: The Contractor must repair or replace worn or defective parts of the elevator system(s) using only genuine manufacturer’s replacement parts. The Contractor may use substitute replacement parts from other manufacturers with prior written permission from the Departmental Representative. The Contractor must maintain a sufficient supply of replacement parts to prevent extended elevator downtime. The Contractor must replace defective parts within twenty-four (24) hours or within the timeframe approved by the Departmental Representative. Logbooks: The Contractor must supply a Maintenance Control Program logbook approved by the provincial Chief Elevator Inspector for the elevator(s) or lift(s). The Contractor must keep this logbook up to date, on site in each facility’s equipment room. The Contractor must notify the departmental representative of missing logbooks immediately. Each logbook must contain a minimum the following information: ?the date on which an inspection, testing and maintenance exercise was carried out ?the name(s) of the person(s) who performed the inspection, testing and maintenance ?List of replacement parts ?notes on any unsatisfactory conditions observed or discovered and the steps taken to correct such conditions ?copies of the design and installation performance test certificates 1.4 Deliverables: The Contractor must provide services on all elevating devices and all associated auxiliary equipment at the following locations: ?Atlantic Institution located in the town of Renous, New Brunswick. ?Dorchester Penitentiary located in the town of Dorchester, New Brunswick. ?Springhill Institution located in the town of Springhill, Nova Scotia ?Nova Institution located in the town of Truro, Nova Scotia ?Newfoundland and Labrador Community Correctional Center in St.-John’s, Newfoundland and Labrador The Contractor must regularly and systematically maintain all equipment at the frequency specified in the Equipment table. Any conditions for participation of suppliers not specified in solicitation documentation: none. Estimated quantity of commodity: see solicitation document statement of work and basis of payment. Duration of Standing Offer and Time Frame for Delivery: Period of the Standing Offer: The Work is to be performed during the period of March 1st, 2026, to February 28th, 2027, with the option to renew for four (04) additional one-year periods. File Number: 21207-26-5165313 Contracting Authority: Isabelle Basque Telephone number: +1 (555) 000-0000 Facsimile number: N/A E-mail: contact@example.gov NOTE TO BIDDERS: Bidders can obtain the complete statement of work and evaluation criteria by downloading the solicitation document and associated documents from the Canada buys / tender opportunities website. The Crown reserves the right to negotiate with suppliers on any procurement. Documents may be submitted in either official language of Canada (English or French). After contract award, bidders may request a debriefing on the results of the bid solicitation process. Bidders should make the request to the Contracting Authority within fifteen (15) working days of receipt of the results of the bid solicitation process. The debriefing may be in writing, by telephone or in person. Procurement Assistance Canada (PAC) offers seminars to businesses interested in learning how to sell goods and services to the Government of Canada. The seminars are FREE. Topics include: ? Understand the federal procurement process; ? Learn about searching for opportunities; ? Find out how to bid on opportunities; ? Discover how to prepare to sell to the government. The full schedule of seminars can be found on the Procurement Assistance Canada website, under find an event (Procurement Assistance Canada: Find an event - Canada.ca).

More opportunities from Government of Canada → Correctional Service of Canada

Same awarding agency

NAICS: 611430
New
International
Nursing Simulation Training - Prairie Region
Solicitation # 21120-27-5331280
The Correctional Service of Canada Health Services Branch requires integrated training for frontline nurses in the Prairie Region to support Nursing Clinical Protocols for Emergency Situations and fulfill mandatory Emergency Trauma Care National Training Standard requirements. The contractor will deliver two-day intensive courses focusing on updated nursing protocols and technical skills through interactive simulation training scenarios, including preparation, simulation, and debriefing. Key deliverables include the provision of Emergency Trauma Care certification and certificates of completion for successful participants. The training must comply with provincial legislation, professional practice standards, and specific Commissioner Directives related to health services and life-preserving interventions. The contract is structured across three regional streams covering Alberta, Saskatchewan, and Manitoba, with a primary term of two years and options to renew for two additional one-year periods. Award is based on the lowest evaluated price among responsive bids that meet all mandatory technical criteria. Proposed instructors must be registered in good standing with their provincial regulatory body, hold recognized trauma instructor certifications such as ITLS or PHTLS, and have delivered at least five simulation courses in the preceding year. Payment is issued monthly via direct deposit or MasterCard Acquisition Card, with pricing based on firm all-inclusive rates per session for up to eight participants.
Professional and Management Development Training

POSTED

1 day ago

DEADLINE

in 3 days
View Details
NAICS: 455219
International
Inmate Purchasing Plan
Solicitation # 21120-22-3929935
The Correctional Service of Canada is seeking to establish a business account agreement with an e-commerce provider to facilitate the purchase of personal property for inmates across its national institutions. The primary objective is to standardize the purchasing process, ensure consistent pricing regardless of location, and enhance institutional safety. Under this arrangement, the supplier will provide a free, centralized business account available 24/7/365, restricted to a pre-approved list of goods. All transactions are funded by inmates via government purchasing cards, resulting in a zero-dollar cost to the Canadian government. The agreement is intended for an initial one-year term with annual reviews for renewal or amendment. To qualify, suppliers must demonstrate at least five years of e-commerce experience, a platform capable of credit card payments, and the ability to provide bilingual customer service in English and French via email and a toll-free number. Key deliverables include the provision of a designated account manager, the creation of bilingual training materials, and the delivery of approved goods to all specified institutions within fourteen calendar days. Suppliers must also implement a robust order-management and tracking system and provide administrative access to the CSC Inmate Purchasing Program Management Team for monitoring. While no security clearances are required, suppliers must adhere to strict security guidelines regarding approved items and follow established workaround plans for deliveries during institutional lockdowns.
All Other General Merchandise Retailers

POSTED

7 days ago

DEADLINE

in about 74 years
View Details
NAICS: 238210
International
PCB Transformer Replacements at Beaver Creek Institution -Minimum
Solicitation # 21443-27-5482359
Correctional Service Canada requires the removal and replacement of two transformers at the Beaver Creek Institution (Minimum) in Gravenhurst, Ontario, to ensure compliance with the Canadian Environmental Protection Act and PCB Regulations. The project involves replacing one pad-mounted transformer with a PCB concentration of 172 ppm and one pole-mounted transformer that has reached the end of its service life. All work, including the supply and installation of new units, the regulated disposal of PCB-contaminated equipment and oil, electrical outage coordination, and site restoration, must be completed by December 31, 2026. The selected contractor must provide technicians with valid 309A electrical and high voltage Qualified Electrical Worker (TQE) certifications and obtain Electrical Safety Authority (ESA) sign-off. Due to the institutional setting, personnel will be escorted at all times, must adhere to strict search protocols, and may be required to provide tuberculosis testing results. The contractor is responsible for providing all necessary high voltage personal protective equipment and aerial work platforms. Evaluation is based on mandatory technical criteria and a history of past work-related projects, with a requirement for commercial general liability insurance covering completed operations for six years beyond the project's completion.
Electrical Contractors and Other Wiring Installation Contractors

POSTED

8 days ago

DEADLINE

in 9 days
View Details
NAICS: 561730
International
Snow Removal Services – St. John’s CCC
Solicitation # 21201-27-5544622
The Correctional Service of Canada is soliciting bids for comprehensive snow clearing, removal, sanding, salting, and ice control services at the St. John’s Community Correctional Center located at 86 Charter Avenue, St. John’s, Newfoundland and Labrador. The contract begins on December 1, 2026, and runs through April 30, 2027, with the option for four additional one-year renewals. The selected contractor must provide all necessary labor, equipment, and materials, maintaining a 24/7 contact number and commencing work within two hours of notification. Key operational requirements include clearing parking areas before 0600 hours and initiating snow removal once accumulation reaches six centimeters. All equipment must be equipped with backup alarms and rotating amber warning lights. This procurement is open to Canadian suppliers and applicable trading partners, with a conditional set-aside for Indigenous businesses under the Procurement Strategy for Indigenous Business if two or more responsive bids are received. The contract will be awarded to the lowest priced compliant bid that meets all mandatory technical criteria and experience requirements. Contractors must maintain Commercial General Liability Insurance of at least 2,000,000 dollars and adhere to strict institutional security protocols, including being escorted by staff at all times and completing tuberculosis testing. Invoicing must be submitted electronically and follow specific professional formatting requirements to be eligible for payment via direct deposit or MasterCard purchase card.
Landscaping Services

POSTED

12 days ago

DEADLINE

in 2 days
View Details

Earlier notices in this NAICS code

Posted before this notice, open and closed

Find Active Opportunities Like This

Get AI-powered intelligence on the opportunities still open

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 750+ contractors already using CLEATUS