Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, September 16 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

Emergency 150KW Diesel Generator Set - Award Notice

Awarded

W9127N26PA074Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

STATELINE SOLUTION LLC has been awarded a contract worth $89,140.09 for the provision of an Emergency 150KW Diesel Generator Set under solicitation number W9127N26PA074. The award is a Total Small Business Set-Aside, designated for small businesses as defined by the SBA, and falls under the NAICS code 335312 for Electrical Equipment Manufacturing. The contract was posted on July 10, 2026, and is managed by the U.S. Army Corps of Engineers office in Portland, Oregon, with the performing work location designated as Blue River, Oregon, 97413. The primary point of contact for this award is Consuelo Kiser, who can be reached via email at consuelo.j.kiser@usace.army.mil or by phone at 785-806-7187. The award reflects a procurement by the Department of Defense to support emergency power needs at the specified location.

General Info

StateLine Solutions LLC awarded $89,140.09 for 150KW diesel generator to U.S. Army Corps of Engineers in Blue River, Oregon.

Agency

Department Of Defense → W071 Endist PortlandView Agency

Contract Value

$89,140.09

NAICS

335312 - Motor and Generator ManufacturingView NAICS

Place of Performance

Blue River, OR, 97413, USA

Set-Aside

SBA

Awardee

STATELINE SOLUTION LLCView Profile

Award Issued Date

07/10/2026, 12:00:00 AM UTC

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PhaseAwarded

PostedJul 10

Award Notice

AwardedJul 10

Contract was awarded

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → W071 Endist Portland

Contacts1 person available

OfficePORTLAND, OR, 97204-3495, USA

Organization / Agency

Department Of Defense → W071 Endist Portland

View Agency Profile

Office AddressPORTLAND, OR, 97204-3495, USA

Contacts

Consuelo Kiser

contact@example.gov

+1 (555) 000-0000

Full Description

Show more

Awardee is:

STATELINE SOLUTION LLC
28141 EDINBURGH DR
ROMULUS, MI 48174-3178

Award amount: $89,140.09

Similar Contracts

Same NAICS industry code

Supply of Uninterruptible Power Supplies (UPS)

Defense Logistics Agency

POSTED

about 19 hours ago

DEADLINE

REGULATOR, CURRENT

Solicitation # SPE7M1-26-T-321C

This solicitation, identified as SPE7M1-26-T-321C, is issued by the Department of Defense Maritime Supply Chain for the procurement of three current regulators. The items are identified by NSN 6110-01-673-7762 and part number 508-00248-50 from Kato Engineering Inc. This is a total small business set-aside under NAICS code 335312. The contract specifies a delivery timeframe of 214 days after order, with a required delivery date of April 14, 2027. The procurement is governed by DLA master technical and quality requirements, including specific packaging standards under RP001 and marking requirements per MIL-STD-129. Delivery is set as FOB Origin, with both inspection and acceptance occurring at the destination. The designated shipping and delivery location is DLA Distribution San Joaquin in Tracy, California. The solicitation was posted on August 31, 2026, with a response deadline of September 11, 2026.

MARITIME SUPPLY CHAIN

POSTED

about 19 hours ago

DEADLINE

Supply of Alternating Current Motors (NSN 6105-01-455-7645)

MARITIME SUPPLY CHAIN

POSTED

about 24 hours ago

DEADLINE

Supply of Electric Windshield Wiper Motors (NSN 2540-01-419-8696)

STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

about 24 hours ago

DEADLINE

Supply of Generator Excitation Systems (NSN 6115002649654)

MARITIME SUPPLY CHAIN

POSTED

about 24 hours ago

DEADLINE

Brushless DC motors for UAS

Solicitation # W911S226U4482

The Department of Defense, specifically the W6QM Micc-Ft Drum office located in Fort Drum, New York, is seeking quotes for brushless DC motors intended for use in Unmanned Aircraft Systems. This combined contract opportunity, identified by solicitation number W911S226U4482, is designated as a total set-aside for small businesses under NAICS code 335312. Interested vendors must submit their responses by September 17, 2026, at 4:00 PM. A critical requirement for all submissions is the inclusion of a technical datasheet or a detailed specifications document. The primary point of contact for this procurement is Pratheek Manjunath.

W6QM Micc-Ft Drum

POSTED

about 24 hours ago

DEADLINE

Portable Solar Generators

Solicitation # FA301626Q0277

FA3016 502 Cons Cl

POSTED

about 24 hours ago

DEADLINE

61--MOTOR,DIRECT CURRENT

Solicitation # SPE7M1-26-T-348U

Solicitation SPE7M1-26-T-348U is a fixed-price request for quotations issued by the Department of Defense, specifically DLA Land and Maritime, for the procurement of eight direct current motors under NSN 6105015815045. These motors are identified as pump and motor units intended for use in Tactical Water Purification systems. The procurement is categorized under NAICS code 335312. Quotes must be submitted electronically via the DIBBS system by the deadline of September 21, 2026. Approved sources for this item include 0EXU3 33901112 and 0U5N7 33901112. The delivery requirement is set for 105 days after the order, with a need ship date of January 5, 2027, and a final required delivery date of May 12, 2027. Items are to be delivered FOB Origin to DLA Distribution San Joaquin in Tracy, California. Packaging must adhere to ASTM D3951 and RP001, with marking and labeling following MIL-STD-129. Inspection and acceptance will occur at the destination. Evaluation will be based on technical and price factors, including a HUBZone price evaluation preference. Offerors proposing alternate parts must provide a complete data package for both approved and alternate parts, and items produced via additive manufacturing are ineligible for award unless specifically authorized. The contract incorporates various federal regulations, including the Berry Amendment, Buy American Act, and DFARS requirements for safeguarding covered defense information and reporting cyber incidents. Invoicing and payment must be processed through the Wide Area WorkFlow system.

MARITIME SUPPLY CHAIN

POSTED

about 24 hours ago

DEADLINE

61--MOTOR,DIRECT CURRENT

Solicitation # SPE7M1-26-T-348X

Solicitation SPE7M1-26-T-348X is a fixed-price request for quotations issued by the Department of Defense, specifically DLA Land and Maritime, for the procurement of 15 direct current motors under NSN 6105013148602. The procurement is conducted under the First Destination Transportation program with shipping terms set as FOB Origin. Delivery is required within 136 days, with a need ship date of August 23, 2026, and a final required delivery date of April 25, 2027. All items are to be delivered to DLA Distribution Cherry Point in North Carolina, where both inspection and acceptance will take place. The solicitation is governed by NAICS code 335312 and incorporates the DLA Master Solicitation for Automated Simplified Acquisitions Revision 105. Quotes must be submitted electronically via the DIBBS system by September 21, 2026. Compliance with the Buy American Act, the Berry Amendment, and MIL-STD-129 for marking and labeling is mandatory. Packaging must adhere to ASTM D3951 and RP001 standards. Payment and receiving reports must be processed through the Wide Area WorkFlow system. The government will not evaluate offers utilizing additive manufacturing and may apply a HUBZone price evaluation preference during the award process.

MARITIME SUPPLY CHAIN

POSTED

about 24 hours ago

DEADLINE

61--MOTOR,ALTERNATING CURR

Solicitation # SPE7M1-26-T-348V

Solicitation SPE7M1-26-T-348V is a request for quotations issued by the Department of Defense, specifically DLA Land and Maritime, for the procurement of two alternating current motors under NSN 6105014557645. The procurement is categorized under NAICS code 335312. Quotes must be submitted electronically via the DIBBS system by the deadline of September 21, 2026. The approved source for this item is 75477 603511-148. The contract requires delivery to DLA Distribution Jacksonville within 133 days after the order date, with shipping terms set as FOB Origin. Inspection and acceptance will occur at the destination in accordance with FAR 52.246-2. Packaging and marking must comply with MIL-STD-2073-1E, RP001, and MIL-STD-129. Payment processing is required through the Wide Area WorkFlow system. Offerors must adhere to the Buy American Act, the Berry Amendment, and NIST SP 800-171 cybersecurity requirements.

MARITIME SUPPLY CHAIN

POSTED

about 24 hours ago

DEADLINE

61--EXCITATION SYSTEM,G

Solicitation # SPE7M1-26-T-348J

Solicitation SPE7M1-26-T-348J is a Request for Quotations issued by the Department of Defense Maritime Supply Chain on September 11, 2026, for the procurement of three Excitation System, Generator units under NSN 6115002649654. This requirement is designated as a critical application item for the Egyptian Ministry of Defense and is a total small business set-aside under NAICS code 335312. Approved sources for the equipment include Precision Electronics, Inc (P/N 5485) and DRS Naval Power Systems Inc (P/N 70-1368). Quotes must be submitted electronically via the DIBBS system by September 21, 2026. The contract specifies a delivery period of 20 days after award with shipping terms as FOB Origin. Delivery is to be coordinated through DF Young in Maryland for final shipment to the Egyptian Ministry of Defense in Cairo. Packaging must adhere to MIL-STD-2073-1E and RP001, while marking must comply with MIL-STD-129. Inspection and acceptance will occur at the point of origin, requiring the manufacturer to maintain quality standards such as SAE AS9003 or ISO 9001. Administrative requirements include the use of Wide Area WorkFlow (WAWF) for invoicing and compliance with various FAR and DFARS clauses, including those regarding hazardous material labeling, safeguarding covered defense information, and combating trafficking in persons.

MARITIME SUPPLY CHAIN

POSTED

about 24 hours ago

DEADLINE

CONDITIONER,POWER L

Solicitation # SPRRA127QA003

Al DLA Aviation At Huntsville

POSTED

about 24 hours ago

DEADLINE

More opportunities from Department Of Defense → W071 Endist Portland

Same awarding agency

LOP Fire Protection and Unwatering Pump System

Solicitation # W9127N26QA155

Solicitation W9127N26QA155 is a total small business set-aside for the procurement of a fire protection and unwatering pump system for the Lookout Point Powerhouse in Lane County, Oregon. Issued by the Department of Defense W071 Endist Portland, this firm-fixed-price requirement is necessitated by a deep reservoir drawdown that would otherwise disable critical service water and fire protection systems. The scope of work includes the delivery of a 650 GPM vertical pump/motor assembly, a 0.25 HP jockey pump system, a fire pump controller panel, overload protection, and various piping and fitting components. All equipment must meet AWWA E103 and HI 9.1-9.5 standards, with a delivery deadline of March 1, 2027, shipped FOB destination to Lowell, Oregon. The government will award a single purchase order based on an evaluation of technical compliance, past performance, and price, utilizing the HUBZone price evaluation preference. Offerors must be registered in the System for Award Management under NAICS code 333914 and submit a complete quote package via email to the designated point of contact. The solicitation underwent two amendments, with the final response deadline extended to September 11, 2026. Key contractual requirements include compliance with MIL-STD-129 for marking, DFARS cybersecurity and telecommunications regulations, and specific pump acceptance criteria according to HI ANSI/HI 14.6 grade 2B.

Measuring, Dispensing, and Other Pumping Equipment Manufacturing

POSTED

about 24 hours ago

DEADLINE

W9127N26QA145 - PH2 BLADE SEALS REPLACEMENT for Bonneville Dam

Solicitation # W9127N26QA145

Gasket, Packing, and Sealing Device Manufacturing

POSTED

about 24 hours ago

DEADLINE

Sources Sought & RFI for USACE NWP Bonneville Lock & Dam Commercial BPA

Solicitation # W9127N27QA0001

Specialized Freight (except Used Goods) Trucking, Local

POSTED

about 24 hours ago

DEADLINE

Technical Training Services

Cosmetology and Barber Schools

POSTED

DEADLINE

Mechanism Installation & Adaptation (Field Integration)

Electrical Contractors and Other Wiring Installation Contractors

POSTED

DEADLINE

Specialized Mechanism Overhaul (Shop/Factory Service)

Electronic and Precision Equipment Repair and Maintenance

POSTED

DEADLINE

High-Voltage Circuit Breaker Maintenance & Field Services

Electrical Contractors and Other Wiring Installation Contractors

POSTED

DEADLINE

Lookout Point DGA supply and incidental install

Solicitation # W9127N26QA160

Solicitation W9127N26QA160 is a total small business set-aside for the purchase and installation of three online Dissolved Gas Analysis (DGA) monitoring systems for the main unit generator step-up transformers at the Lookout Point Powerplant in Jacksonville, Oregon. The contract is a firm-fixed-price award under NAICS code 334513, with the government evaluating quotes based on technical compliance, past performance, and price. The scope of work includes the delivery of the DGA monitors, incidental installation, necessary installation supplies, and eight hours of onsite training conducted by a manufacturer-approved instructor. The systems must be capable of measuring total dissolved combustible gas, total hydrocarbon, oil temperature, moisture-in-oil, ambient temperature, and nine specific gases, while supporting Modbus RTU and DNP3 protocols with RS-232, RS-485, and Ethernet interfaces. Key deliverables include a PC-based software package for remote data analysis and operation and maintenance manuals in both hardcopy and PDF formats. The contractor must provide an onsite field engineer or technician to lead installation, functional testing, and system verification, which must be coordinated with the Contracting Officer at least 14 days in advance. All items and services must be delivered FOB destination by March 1, 2027, with shipments restricted to normal business hours from Monday through Thursday. Additionally, the contractor must comply with specific security requirements, including OPSEC Level I and CUI training for personnel, and adhere to DFARS regulations regarding cybersecurity and the prohibition of covered defense telecommunications equipment.

Instruments and Related Products Manufacturing for Measuring, Displaying, and Controlling Industrial Process Variables

POSTED

DEADLINE

John Day Dam Powerhouse HVAC Upgrades

Solicitation # W9127N26BA006

The U.S. Army Corps of Engineers Portland District is seeking a single firm-fixed-price contract for comprehensive HVAC upgrades at the John Day Dam Powerhouse, located across Oregon and Washington. The project involves replacing primary and secondary chillers, installing four new chiller skid packages with approximately 600 tons of refrigeration capacity, and implementing a new automated digital HVAC control system. Key technical requirements include a mix of water-cooled and air-cooled systems, new intake and exhaust ducting for fire smoke propagation prevention, and the installation of mini-split units. The work must be performed within an active powerhouse containing high-voltage electrical equipment and areas prone to water intrusion, with a construction period of 1,004 calendar days. The estimated project magnitude is between 25 million and 100 million dollars under NAICS code 238220. A critical condition for award is compliance with Cybersecurity Maturity Model Certification, specifically CMMC Level 2 (Self) for the prime contractor and appropriate levels for subcontractors based on the type of information processed. The solicitation is expected to be issued as an Invitation for Bids in mid-September 2026, requiring bidders to have an active SAM registration and a current NIST SP 800-171 assessment.

Plumbing, Heating, and Air-Conditioning Contractors

POSTED

DEADLINE

Notice of Intent to award a Sole Source - XJ2 Breaker Overhaul

Solicitation # W9127N26QA137

The U.S. Army Corps of Engineers Portland District intends to award a sole-source, firm-fixed-price contract for the overhaul and maintenance of the XJ2 Breaker at the John Day Lock and Dam. The scope of work includes full-service maintenance, emergency response, baseline inspections, and the overhaul of the ABB/Hitachi Energy Type HECI-5R Generator Circuit Breaker. Specific tasks involve the installation and adaptation of the HMB-4.5 mechanism, off-site factory overhaul of the legacy HMB-4 mechanism, routine monthly maintenance, and technical training for powerhouse personnel. Nexus Power Solution LLC is identified as the intended sole-source provider because they are the authorized regional representative for Hitachi Energy, the original equipment manufacturer. This exclusivity ensures access to proprietary engineering drawings and manufacturing specifications necessary for the project. While the government intends to proceed with Nexus Power Solution LLC, interested parties may submit capability statements by August 18, 2026, to demonstrate their ability to meet these specialized requirements.

Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and Maintenance

POSTED

DEADLINE

Lookout Point Powerhouse Drawdown Transformer Cooling Water Supply

Solicitation # W9127N26QA125

Solicitation W9127N26QA125 is a total small business set-aside for the procurement of a new, FOB destination refrigerated closed-loop water chilling system for the Lookout Point Powerhouse in Lowell, Oregon. The system is required to maintain critical transformer cooling and fire protection during a scheduled reservoir drawdown from October to February that disables the facility's service water. The technical requirements specify a 20-ton (75 kW) system capable of circulating water at 120 gpm and maintaining a maximum cooled water temperature of 80 degrees Fahrenheit in ambient temperatures ranging from -20 to 120 degrees Fahrenheit. Key components include a 3 hp circulating pump, a maintenance tank of at least 100 to 200 gallons depending on configuration, and IP65 rated controls and sensors. The entire system must fit within a 20 by 14 foot horizontal area and include anchor points for concrete seismic anchorage. The contract is managed by the Department of Defense, specifically the Army Corps of Engineers Portland District. All equipment must be standard commercial cataloged products, and the successful contractor is required to provide one hardcopy and one electronic operation and maintenance manual. Delivery is required on or before March 1, 2027, with shipments restricted to Monday through Thursday between 7 am and 3 pm Pacific Time. Evaluation for award is based on technical compliance and past performance. The procurement incorporates various FAR and DFARS clauses, including requirements for System for Award Management registration, Buy American certifications, and specific military standards for marking and labeling such as MIL-STD-130 and MIL-STD-129. Invoicing and reporting must be conducted through the Wide Area WorkFlow system.

Air-Conditioning and Warm Air Heating Equipment and Commercial and Industrial Refrigeration Equipment Manufacturing

POSTED

DEADLINE

Bonneville Lock and Dam - Navigation Lock 1 Bridge Replacement

Solicitation # W9127N26BA024

Solicitation W9127N26BA024 is a total small business set-aside for the replacement of the Navigation Lock 1 Bridge at the Bonneville Lock and Dam in Cascade Locks, Oregon. The project involves replacing the existing bridge with a new single-span steel girder bridge featuring a concrete deck, two travel lanes, and a sidewalk. The scope includes partial demolition of the existing bridge, construction of approach roadways, and the installation of a concrete stub abutment anchored into rock and a concrete abutment supported by drilled shafts. Due to the requirement that vehicular access remain open throughout construction, the project will likely be executed in phases. Additional technical requirements include lead and asbestos removal, working within environmental and seasonal restrictions, and performing barge crane lifting near high-voltage power lines. The procurement is managed by the USACE Portland District, with a project magnitude estimated between 10 million and 25 million dollars. Following several amendments, the solicitation closing date was extended to October 8, 2026. Bids must be submitted electronically in PDF format to the designated points of contact, as hard copies will not be accepted. Site visit attendees must be U.S. citizens and possess a Real ID for access. The contract includes specific regulatory requirements, such as the use of a professional archaeological monitor during ground disturbance and strict adherence to employment eligibility verification via Form I-9. Foreign contracting parties are subject to a 2 percent Federal excise tax withholding unless specific IRS documentation is provided.

Highway, Street, and Bridge Construction

POSTED

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 650+ contractors already using CLEATUS