Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, July 22 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

Emergency Egress Device Supply

Active

Federal

Response Deadline07/30/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract calls for the supply of emergency egress devices including escape hatches and breaching tools that must fully comply with Department of Defense safety and technical standards. All delivered items must adhere to strict packaging and labeling requirements and undergo origin inspection to ensure adherence to regulatory and sourcing protocols. The equipment is intended for critical use in emergency scenarios and must meet rigorous performance and durability criteria to support military operations. The solicitation is structured as a subcontract under the NAICS code 336612, focused on ship and boat building. It was posted on July 19, 2026, with a response deadline of July 30, 2026, and is managed by the Maritime Supply Chain division of the Department of Defense. The place of performance and point of contact details are not specified, but compliance with all Federal Acquisition Regulation and defense-specific requirements is implied. Bidders must ensure full alignment with DoD specifications and be prepared for rigorous quality assurance verification prior to delivery.

General Info

Supply of DoD-compliant emergency egress devices for military use under NAICS 336612, with strict packaging and quality verification.

Agency

Department Of Defense → MARITIME SUPPLY CHAINView Agency

NAICS

336612 - Boat BuildingView NAICS

Place of Performance

US

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 19

subcontract

Response DeadlineJul 30

Submission deadline

Response Deadline

07/30/2026, 05:00:00 PM UTCin 10 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → MARITIME SUPPLY CHAIN

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → MARITIME SUPPLY CHAIN

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Supply of emergency egress devices such as escape hatches and breaching tools meeting DoD safety and technical standards, including packaging, labeling, and origin inspection compliance.

Similar Contracts

Same NAICS industry code

Marine Toilet Supply (NSN: 4510-01-602-2193)The contract calls for the supply and delivery of one marine toilet per CLIN, specifically complying with the National Stock Number 4510-01-602-2193 and the manufacturer’s technical specifications for the Dometic Sealand model P/N 301197506. All units must be delivered under FOB Origin terms, meaning the buyer assumes responsibility for transportation and related costs once the goods leave the supplier’s location. A strict five-day delivery timeline is mandated from the date of order issuance, requiring rapid production and logistics coordination to meet operational readiness demands. The contract is structured as a subcontract under the Defense Logistics Agency, which operates under the Department of Defense, and applies to performance at Virginia Beach, 23459. The solicitation, identified by the RFQ number SPE8E826T4762, was posted on July 20, 2026, with responses due by July 31, 2026, and falls under the NAICS code 336612, classifying it within the manufacturing of other transportation equipment.

Defense Logistics Agency

POSTED

about 9 hours ago

DEADLINE

Request for Information (RFI): Special Mission Vessel (SMV) – Helicopter, Unmanned Aerial System (UAS), Unmanned Surface Vehicle (USV) & Small Craft Support VesselThe U.S. Navy, through PMS 300, is issuing a Request for Information to identify industry capabilities for a Special Mission Vessel designed to support maritime security operations, with a focus on unmanned systems, small boat interdiction, and partner nation integration. The vessel must be approximately 300 to 400 feet in length, with a steel monohull or catamaran hull form, and comply with multiple international regulatory standards including 46 CFR, ABS classifications, SOLAS, MARPOL, and Panama Canal requirements. It must sustain operations for at least 30 days without resupply, achieve a 9,600-nautical-mile range at 10 knots, and operate safely in Sea State 5 conditions while performing boat launches and recoveries in Sea State 4. The vessel must feature a flight deck certified for SH-60, MH-60, MH-65, and Class 2/3 UAS operations, include dedicated 20x20 ft UAS storage, two TEU container sockets for control systems, and a non-crane-based system for launching and recovering vessels up to 44 feet and 35,000 pounds. It must support weapons systems, including .50 cal mounts, an armory, and an ammunition magazine, while providing accommodations for up to 59 personnel, including civilian mariners and embarked crews, with secure detainee space for 10 to 12 individuals. The vessel must have robust fueling capabilities for diesel, MOGAS, and AVGAS, with designated refueling status compliant with USCG standards, and include integrated towing and mooring systems for interoperability with U.S. and partner nation vessels. Required spaces include a 750 sq ft SCIF and 200 sq ft radio room with SIPR/NIPR communications, modular compartments for rapid reconfiguration, and reserved space, weight, and power for future government-furnished equipment like SATCOM, EO/IR, and radar systems. Respondents must detail their proposed acquisition method—whether new construction or modification of an existing vessel—and provide timelines, shipyard capacity, class society certification status, engineering timelines for conversions, and cost estimates with a ±10% confidence range. Data rights ownership and any restrictions under DFARS 252.227-7015 must be disclosed. Submissions, due by August 19, 2026, must be

POSTED

about 14 hours ago

DEADLINE

CONNECTOR,THRU-HULLThis contract pertains to the procurement of a specialized thru-hull connector assembly designated as SPECIAL EMPHASIS material (Level I), critical to the operation of a shipboard system where failure could result in catastrophic consequences including loss of life or vessel. The item must strictly comply with drawing CPG 1025 and associated specifications including QQ-N-286 for material composition, with mandatory chemical and mechanical testing, non-destructive inspections, and full traceability from raw material to final assembly. Every component, including the body, nut, and washers, requires certified test reports that are permanently tied to traceability markings on the part and must be submitted electronically through WAWF prior to shipment. First Article Testing is mandatory and must be performed on a sample unit delivered to Portsmouth Naval Shipyard, with all welding, brazing, and heat treatment processes requiring prior approval and documented qualification data. Electronic signatures are accepted for certifications, but documentation must be positive, unqualified, and fully traceable, with no disclaimers permitted. The contractor must maintain a quality system compliant with ISO-9001 or MIL-I-45208 and adhere to stringent material control procedures to prevent commingling, ensure proper labeling, and verify all subcontracted operations. All shipments are subject to prior government acceptance through WAWF using designated DODAAC codes N50286 and N39040 and cannot be shipped without formal acceptance. The order is DO-rated under the Defense Priorities and Allocations System, issued under Emergency Acquisition Flexibilities, and subject to Buy American and Small Business Set-Aside provisions. Compliance with NAVSEA and Navy-specific technical standards governing welding, lubrication, thread inspection, and mercury-free manufacturing is mandatory, and any deviations require formal written approval. Final acceptance is contingent upon 100% inspection of certification documentation, traceability, and compliance with all specified test requirements, with zero defect tolerance for lot acceptance.

Navsup Weapon Systems Support Mech

POSTED

about 14 hours ago

DEADLINE

Wire Rope Assembly ManufacturingThe contract requires the manufacture and delivery of three single-leg wire rope assemblies that comply with DLA Master List RD005 specifications, ensuring adherence to rigorous technical and quality standards. Each unit must undergo FOB origin inspection to verify conformance prior to shipment, and all products must be properly labeled, packaged, and handled in accordance with applicable export control regulations. The work is classified under NAICS code 336612, indicating focus on other transportation equipment manufacturing, and is structured as a subcontract under the Department of Defense. Performance of the contract is designated for Seal Beach, California, with a delivery and inspection timeline governed by a response deadline of July 30, 2026, and the solicitation was posted on July 19, 2026. All aspects of production and logistics must align with federal procurement mandates and defense supply chain requirements.

CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

DEADLINE

Fiber Rope Assembly ManufacturingThe contract requires the manufacture and delivery of three fiber rope assemblies that must fully comply with the DLA Master List specification RD005, ensuring adherence to all technical, material, and performance standards outlined therein. Each unit must be marked in accordance with MIL-STD-129 for uniform identification, packaged using the DLA RP001 packaging standard to guarantee protection during transit and storage, and must have all government identifiers removed as specified under requirement RQ011 to ensure proper de-identification prior to delivery. The work is classified as a subcontract under NAICS code 336612, relating to other transportation equipment manufacturing, and is managed under the Department of Defense through the organization Construction & Equipment Manu & Con. The place of performance is designated as Seal Beach, California, with a delivery ZIP code of 90740-5000. The solicitation was posted on July 19, 2026, with a response deadline of July 30, 2026, indicating a compressed timeline for submission of proposals or bids. No set-aside classification is specified, meaning the opportunity is open to all eligible contractors without preference given to small businesses or other categories. The contract is administered via the DIBBS platform, and all communications and submissions must follow the procedures outlined through the official link provided. While no point of contact is listed, bidders are expected to reference the DIBBS portal for any additional requirements, clarifications, or updates related to the solicitation. All deliverables must meet stringent military specification standards to ensure operational compatibility and regulatory compliance upon receipt.

CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

DEADLINE

FILTER AND CLIPSThe contract is for the supply of one unit of FILTER AND CLIPS with NSN 2040-01-612-3682, sourced from BERNER INTERNATIONAL LLC under part number 80MK2036C, to be delivered FOB destination within 20 days of contract award. The item must comply with all DLA packaging requirements outlined in RP001 and MIL-STD-2073-1E, including specified packaging methods, materials, and marking per MIL-STD-129, with no special marking required. The delivery destination is the USS GERALD R FORD CVN 78, with shipment instructions prohibiting parcel post and mandating use of the fastest traceable运输 method under DLA Procurement Note C19 and C20. Mercury and mercury-containing compounds are strictly prohibited unless part of approved exceptions such as batteries, fluorescent lamps, or weapon systems, and any allowed mercury-containing items must meet NAVSEA 5100-003D shielding and containment standards. All packaging and delivery must fulfill DLA’s unit of issue alignment and traceability protocols, with the required delivery date set for July 15, 2026, and the solicitation issued under contract number SPE7M4-26-T-269C. The contract incorporates technical and quality requirements referenced from the DLA Master List and enforces zero variance in quantity. The point of contact for this solicitation is Rory O’Reilly of the Department of Defense’s Fluid Handling Division, with full compliance required for government use and logistics tracking via provided DIC, ADV, and IPD codes.

FLUID HANDLING DIVISION

POSTED

DEADLINE

Supply of BRIDGE FLOAT Units (NSN 6115015558294)The contract entails the procurement and delivery of four BRIDGE FLOAT units, identified by part number 2657538 and CAGE code 11083, strictly conforming to the National Stock Number 6115015558294 for installation on the USCGC MUNRO (WMSL 755). All units must be brand new, never used, and fully compliant with Defense Federal Acquisition Regulation Supplement and Government Furnished Equipment labeling standards. The work is executed under a subcontract issued by the Defense Logistics Agency, part of the Department of Defense, with the North American Industry Classification System code 336612 indicating the manufacturing focus on ship and boat building and repairing. The items are destined for a specific naval platform, emphasizing precision in alignment with military specifications and operational readiness requirements.

Defense Logistics Agency

POSTED

DEADLINE

Manufacture of ISO-Compliant Cargo ContainerThe contract calls for the fabrication of a 20-foot by 8-foot by 8-foot 6-inch green steel cargo container designed to meet international ISO, CSC, and IMDG safety and structural standards. The container must be manufactured to exact specifications, including proper structural certification and official manufacturer markings to ensure compliance with global shipping and transport regulations. All work must be executed by a small business as this is a Total Small Business Set-Aside under SBA guidelines, and the NAICS code 336612 confirms the scope involves the manufacturing of containers and similar packaging. Performance of the work is required at Scholfield Barracks, HI 96857-5000, with submissions due by July 24, 2026, and the solicitation was posted on July 17, 2026, under the Department of Defense’s Construction & Equipment Containers procurement office.

CONSTRUCTION & EQUIPMENT CONTAINERS

POSTED

DEADLINE

Portlight (Marine Window) Supply and IntegrationThe contract entails the supply and integration of 10-inch diameter marine-grade portlights into aluminum door frames, with a strict requirement for watertight integrity and full compliance with MIL-PRF-24644 standards. The work involves precision manufacturing and installation processes to ensure the portlights withstand harsh marine environments through durable materials, proper sealing, and structural compatibility with the aluminum framing system. All components must meet rigorous military specifications to guarantee performance under extreme conditions, including corrosion resistance, impact resilience, and long-term operational reliability in saltwater exposure. The opportunity is posted as a subcontract under NAICS code 336612, with a response deadline of July 23, 2026, at 2:00 PM, and was made available on July 17, 2026. The procurement is managed by the Sflc Procurement Branch 1 under the Department of Homeland Security, indicating the end-use is for critical government or maritime infrastructure. While specific location details for performance or contact information are not provided, the technical scope demands qualified contractors with proven experience in marine window systems and military-grade integration. Compliance with the referenced military specification is mandatory, and failure to meet performance, material, or sealing requirements will result in rejection.

Sflc Procurement Branch 1(00080)

POSTED

DEADLINE

UNION ASSEMBLYThis contract pertains to the procurement of a 0.500 IPS Socketweld Union Assembly designated as SPECIAL EMPHASIS material (Level I), critical to shipboard systems where failure could result in catastrophic loss of life, vessel, or mission-critical capabilities. The item must strictly conform to Drawing 845-2445110 and associated specifications including QQ-N-281, MIL-C-15726, and MIL-C-24679 for material composition, with mandatory chemical and mechanical certification traceable to unique heat-lot markings on each component. All manufacturing, welding, brazing, and non-destructive testing must adhere to stringent Navy standards including S9074-AQ-GIB-010/248 and S9074-AR-GIB-010A/278, with all procedures and personnel qualifications requiring prior Navy approval. Certification documentation must include full traceability from raw material through final assembly, with 100% verification of test reports, markings, and compliance, and must be submitted electronically via Wide Area Work Flow to Portsmouth Naval Shipyard prior to shipment, with delivery no later than 365 days après contract effective date. The contract enforces total quality control with mandatory ISO-9001 and ISO-10012 or MIL-I-45208 and MIL-STD-45662 quality systems, government source inspection at the contractor’s facility, and full audit rights for all subcontractors. Thread inspection must follow FED-STD-H28 System 21 unless explicitly overridden, and internal threads must be cut, not cold-formed. Lubricants containing molybdenum disulfide are prohibited; A-A-59004 anti-galling compound is required. All material must be mercury-free, and welding or brazing require documented procedures, qualification data, and filler metal certifications with lot traceability. Any nonconformity, waiver, or deviation requires formal approval by the Contracting Officer and must be classified as Critical, Major, or Minor with full impact analysis. Deliverables are subject to zero-defect acceptance sampling, with all certifications, inspection records, and test results submitted digitally to the Government, and any shipment is prohibited without prior written acceptance via WAWF using designated DODAACs N50286, N39040, and the notification email PORT_PTNH_WAW

Navsup Weapon Systems Support Mech

POSTED

DEADLINE

MK 66 Mod 0 Heavyweight Undersea Training Targets (MK 66 HUTTs), Support Equipment, Spares, & Engineering ServicesThe Naval Undersea Warfare Center Division, Newport, RI intends to award a sole-source, single-award Indefinite Delivery Indefinite Quantity (IDIQ) contract for MK 66 Mod 0 Heavyweight Undersea Training Targets, associated engineering services for future upgrades, and support equipment kits, following statutory authority under 10 U.S.C. § 4022 for follow-on production from an existing Other Transaction Authority agreement. The incumbent contractor, SAAB Inc., awarded under the Undersea Technology Innovation Consortium, will be the only eligible recipient once formal approval of the follow-on determination is granted. The contract will feature Firm Fixed Price delivery and task orders with an ordering period of up to 60 months post-award. This pre-solicitation notice is issued solely for transparency and planning purposes; no formal solicitation has been issued and proposals are not being solicited at this time. The anticipated release date for the formal Request for Proposal N66604-26-R-0230 is August 2026, and the North American Industry Classification System code is 336612 with a size standard of 1,000 employees. Draft documents provided are for information only and do not constitute a binding solicitation or entitle respondents to compensation.

Nuwc Division Newport

POSTED

DEADLINE

SEAT ASSY SPLITThis contract pertains to the repair of the SEAT ASSY SPLIT under solicitation N0010426QJB78, with a required repair turnaround time of 60 days measured from physical receipt of the asset at the contractor’s facility as logged in the Commercial Asset Visibility system. The work must comply with MIL-STD-130 Rev N for marking and follow the contractor’s approved repair standards, technical orders, and manufacturer specifications. Government Source Inspection is mandatory, and all repairs must be fully tested and inspected to meet original design requirements. Delivery is FOB Origin, with freight handled by the Navy under the CAV Statement of Work, and accelerated delivery is encouraged. The contract is a firm-fixed-price arrangement, and failure to meet the 60-day RTAT triggers a per-unit, per-month price reduction, capped at a specified maximum, without limiting the Government’s right to terminate for default. Any delays due to Government actions are excusable. The contractor must be an authorized distributor of the original manufacturer, with proof provided during proposal submission. Pricing must reflect current market values, and if the item has not been previously purchased by NAVSUP WSS or prices have increased, the offeror must provide comparable NSNs, historical invoices, or pricing justification. An option exists to increase quantities within 365 days after award at the original unit price. The item must be packaged according to MIL-STD-2073, and records of all inspections must be retained for 365 days post-delivery. Cybersecurity maturity certification, Buy American requirements, and small business subcontracting obligations apply. The contract mandates adherence to Defense Federal Acquisition Regulation supplements, including Security Prohibitions, WFP Mod Assist, and applicable Navy directives. All technical documentation provided must be handled according to distribution statements, and unauthorized disclosure is prohibited. Compliance with the CAV system’s reporting timelines and accurate transaction logging are critical to contract performance.

Navsup Weapon Systems Support Mech

POSTED

DEADLINE

More opportunities from Department Of Defense → MARITIME SUPPLY CHAIN

Same awarding agency

Domestic and Maritime Shipping Coordination (FOB Origin, U.S. Flag Vessel Compliance)

Specialized Freight (except Used Goods) Trucking, Local

POSTED

about 9 hours ago

DEADLINE

Packaging and Marking Compliance (MIL-STD-2073-1E and MIL-STD-129)

Packaging and Labeling Services

POSTED

about 9 hours ago

DEADLINE

Hazardous Materials Compliance & Safety Data Sheet (SDS) Management

Other Scientific and Technical Consulting Services

POSTED

about 9 hours ago

DEADLINE

Supply of Metallic Tubing (NSN: 4710016656284)

All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 9 hours ago

DEADLINE

Domestic and International Freight & FOB Origin LogisticsThe contract entails domestic transportation services from a manufacturing site to destinations within the contiguous United States under FOB Origin terms, requiring the contractor to assume responsibility for all logistics once goods are loaded at the origin point. This includes coordination with Department of Defense defense logistics systems and the potential handling of hazardous materials, demanding strict adherence to safety protocols and regulatory compliance. Services are scoped for both domestic and international freight movements, though the primary performance focus remains within the contiguous U.S. The solicitation is structured as a subcontract under NAICS code 484121, indicating specialized truck transportation services, and is managed by the Maritime Supply Chain division of the Department of Defense. Bids must be submitted by August 4, 2026, following a posting date of July 20, 2026, with no set-aside provisions specified, leaving eligibility open to all qualified vendors.

General Freight Trucking, Long-Distance, Truckload

POSTED

about 9 hours ago

DEADLINE

Military-Compliant Packaging and Labeling ServicesThe contract requires comprehensive packaging, labeling, and palletization services for military electrical connectors in full compliance with MIL-STD-129 and RP001 standards, ensuring all items are properly prepared for defense logistics systems. This includes the application of barcode labeling, accurate hazard material handling procedures, and secure palletization to meet military shipping and storage requirements. All work must adhere strictly to federal defense specifications to guarantee interoperability and traceability throughout the supply chain. The solicitation is issued under NAICS code 561910 for other support activities for transportation, and is classified as a subcontract opportunity through the Department of Defense's Maritime Supply Chain division. Responses are due by August 4, 2026, with the posting date listed as July 20, 2026. Performance will be executed in support of Defense Logistics Agency operations, though specific geographic performance locations are not defined in the available data. Participation requires proven capability in military-grade packaging and compliance with stringent labeling protocols, particularly for hazardous substances and electronic connector components.

Packaging and Labeling Services

POSTED

about 9 hours ago

DEADLINE

Precision Electrical Connector ManufacturingThe contract requires the manufacture of military-grade electrical connectors conforming to the MIL-DTL-38999N Revision N specification, specifically the D38999/24WJ20SB model, with full compliance to all defense standards for materials, processing, and performance. Every production step must include rigorous traceability documentation from raw material sourcing through final assembly, ensuring complete accountability and quality assurance. Inspections must be conducted per applicable military and industry protocols, with all inspection records retained and available for audit. Packaging must meet stringent defense requirements to protect against environmental damage and ensure readiness upon delivery. The work is classified as a subcontract under the NAICS code 332112, issued by the Department of Defense through the Maritime Supply Chain office. The solicitation was posted on July 20, 2026, with responses due by August 4, 2026. All delivered units must be fully certified, properly labeled, and shipped in accordance with defense logistics procedures to ensure seamless integration into military systems. The place of performance and point of contact details are not specified, but adherence to the exact technical parameters and documentation requirements is mandatory for contract fulfillment.

Nonferrous Forging

POSTED

about 9 hours ago

DEADLINE

Supply and Delivery of JACK BOX (NSN: 5935015725631)The contract calls for the full manufacture, sourcing, packaging, marking, and shipment of JACK BOX units identified by NSN 5935015725631, with all activities conducted under FOB Origin terms meaning the seller assumes responsibility until the goods are loaded at the origin point. Strict adherence to military standards is required for all aspects of marking and packaging, including compliance with regulations governing hazardous materials to ensure safe handling and transport. The units must be produced and prepared in full accordance with Department of Defense specifications, with no tolerance for deviation in quality or documentation. This subcontract, issued under NAICS code 334210 for electronic component manufacturing, is solicited by the Maritime Supply Chain under the Department of Defense, with a response deadline of August 4, 2026. The place of performance and exact point of contact are not specified, but the delivery destination will be determined by military logistics requirements. All work must be completed and shipped in alignment with federal procurement regulations and defense supply chain protocols, ensuring seamless integration into operational inventory systems.

Telephone Apparatus Manufacturing

POSTED

about 9 hours ago

DEADLINE

Cybersecurity Compliance for Covered Defense InformationThe contract requires the implementation and ongoing maintenance of NIST SP 800-171 security controls to safeguard covered defense information, ensuring full alignment with the Defense Federal Acquisition Regulation Supplement clause DFARS 252.204-7012 and the Cybersecurity Maturity Model Certification standards. This subcontract is part of a broader effort by the Department of Defense to enforce robust cybersecurity practices across its supply chain, with all contractors expected to meet or exceed the baseline requirements for protecting sensitive information handled in support of defense operations. Compliance is not optional and must be continuously validated through documented processes and operational controls. The solicitation, posted on July 20, 2026, with a response deadline of August 4, 2026, falls under NAICS code 541512 for computer systems design services, indicating the technical expertise required to deliver and sustain cybersecurity measures. While no specific place of performance or point of contact is provided, the work is tied to the Maritime Supply Chain organization within the Department of Defense, suggesting coordination may involve naval or maritime logistics systems. The subcontractor must be prepared to demonstrate evidence-based adherence to all applicable controls, with potential audits and third-party assessments to verify compliance over the life of the agreement.

Computer Systems Design Services

POSTED

about 9 hours ago

DEADLINE

Military-Compliant Packaging and PalletizationThe contract requires the provision of packaging, preservation, and palletization services specifically designed to meet stringent military standards for FOB origin shipments, ensuring full compliance with DLA RP001, MIL-STD-129, and ASTM D3951. These regulations govern the proper handling, labeling, and safeguarding of military cargo to maintain integrity through transportation and storage, requiring precise adherence to technical specifications for materials, labeling, moisture protection, and unitization. All work must be executed to support secure, standardized logistics operations critical to Department of Defense supply chain readiness. This is a subcontract under the NAICS code 561990, issued by the Maritime Supply Chain office within the Department of Defense, with a response deadline of August 4, 2026. The solicitation does not specify a set-aside classification or a designated point of contact, and performance location details are not provided, suggesting flexibility in execution as long as compliance and delivery requirements are met. Interested parties must respond by the stated deadline to be considered for award, and the opportunity is accessible through the DIBBS platform using the provided RFQ link.

All Other Support Services

POSTED

about 9 hours ago

DEADLINE

Hazardous Materials Packaging and Labeling ComplianceThe contract requires full compliance with hazard communication standards for the packaging, labeling, and documentation of shipments containing hazardous materials, ensuring alignment with both OSHA regulations and military-specific requirements. All materials must be properly labeled with standardized hazard warnings and accompanied by current, accurate Safety Data Sheets that meet federal and defense protocols. The work involves managing the end-to-end process of preparing hazardous goods for transport, including correct packaging methods, signage, and regulatory documentation to guarantee safe handling and transport throughout the supply chain. This is a subcontract under the NAICS code 561990, issued by the Department of Defense through the Maritime Supply Chain office, with a response deadline of August 4, 2026. The solicitation is open to qualified vendors capable of demonstrating expertise in hazardous materials compliance within military logistics environments. There is no specified place of performance or set-aside designation, and the contract pertains to ensuring regulatory adherence across all phases of shipment preparation, with the expectation of consistent, verifiable compliance to support defense operations and transport safety.

All Other Support Services

POSTED

about 9 hours ago

DEADLINE

Electrical Connector Manufacturing / SupplyThe contract entails the manufacturing and supply of up to 265 electrical plug connectors compliant with MIL-DTL-83723/69B(2) and MIL-DTL-83723H(4) specifications, identified by NSN 593501143439. All units must meet full military qualification standards, including rigorous testing and certification requirements, with strict adherence to approved packaging and labeling protocols to ensure operational readiness and traceability within defense logistics systems. The connectors are intended for use in critical defense applications requiring high reliability and environmental resilience under demanding conditions. This is a subcontract opportunity issued under the Department of Defense through the Maritime Supply Chain organization, with a solicitation posted on July 20, 2026, and responses due by August 4, 2026. The NAICS code 334417 indicates the work falls under the category of other electronic component manufacturing. The contract does not specify a set-aside status, meaning it is open to all eligible suppliers, and performance is expected to align with Department of Defense logistics and quality assurance frameworks. The place of performance and point of contact details are not provided, but bidders must reference the official DIBBS portal link for submission instructions and additional contractual terms.

Electronic Connector Manufacturing

POSTED

about 9 hours ago

DEADLINE