ENAMEL
Active
SPE8ES-27-T-0206FederalResponse Deadline
Contract Overview
Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.
AI Contract Overview
Show more
Solicitation SPE8ES-27-T-0206 is a request for quotations issued by the Defense Logistics Agency Troop Support for the procurement of 5 gallons of green enamel, identified by NSN 8010-00-297-0554. The material must adhere to MPI #8 standards for exterior flat alkyd enamel and comply with the Master Painters Institute Approved Products List. The required delivery date is October 29, 2026, with a delivery window of 20 days after receipt of order. Delivery is FOB destination to the 3BN 160th Tech Supply at Hunter Army Airfield, Georgia. The contract mandates strict adherence to quality and safety standards, including the submission of Safety Data Sheets and labels conforming to the UN Globally Harmonized System and 29 CFR 1910.1200. Packaging must utilize round containers with multiple friction closures and bail-type handles, with marking following MIL-STD-129, including lot or batch numbers and special marking code 33 for shelf life. Inspection and acceptance will occur at the destination. The procurement incorporates various FAR and DFARS clauses, including the Buy American Act, safeguarding of covered defense information, and the prohibition of covered defense telecommunications equipment. Quotations are due by November 3, 2026.
General Info
DLA Troop Support request for 5 gallons of green enamel by October 2026.
Place of Performance
3BN 160TH TECH SUPPLY, HUNTER AAF, GA, 31409-0000, USASet-Aside
NONE
Timeline
PhaseSolicitation
Response Deadline
Organization & Contact Information
Show more
AgencyDepartment Of Defense → Defense Logistics Agency
Contacts1 person available
OfficeUSA
Organization / AgencyDepartment Of Defense → Defense Logistics Agency
Office AddressUSA
Contacts
Stephen Ockenhouse
Full Description
Show more
ENAMEL
ENAMEL
RD003, COVERED DEFENSE INFORMATION POTENTIALLY APPLIES
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RQ016: COMPONENT QUALIFIED PRODUCTS LISTS (QPL)/QUALIFIED MANUFACTURERS
LISTS (QML). THIS ITEM CONTAINS ONE OR MORE COMPONENTS DEFINED BY A
SPECIFICATION(S) WITH AN ASSOCIATED QUALIFIED PRODUCTS LIST (QPL) OR
QUALIFIED MANUFACTURERS LIST (QML). QUALIFICATION REQUIREMENTS IN
PROCUREMENT NOTE H02 "COMPONENT QUALIFIED PRODUCTS LIST (QPL)/QUALIFIED
MANUFACTURERS LIST (QML)" APPLY.
RQ017: PHYSICAL IDENTIFICATION/BARE ITEM MARKING
RQ034: HAZARDOUS COMMUNICATION STANDARD NOTICE
IN ACCORDANCE WITH THE UNIFORM FACILITIES GUIDE SPECIFICATIONS,
UFGS-09900, DATED FEB 2002, DIVISION 09 FINISHES, SECTION 09900,
PAINTS AND COATINGS, THE CURRENT MPI "APPROVED PRODUCTS LIST" WHICH
LISTS PAINT BY BRAND, LABEL, PRODUCT NAME AND PRODUCT CODE AS OF THE
DATE OF CONTRACT AWARD, WILL BE USED TO DETERMINE COMPLIANCE WITH THE
SUBMITTAL REQUIREMENTS OF THIS SPECIFICATION. NO VARIATION FROM THE MPI
APPROVED PRODUCTS LIST IS ACCEPTABLE.
THIS NSN HAS APPROVED PRODUCTS LIST (APL) REQUIREMENTS. THE (APL)
DOCUMENT IS PUBLISHED AND MAINTAINED BY THE MASTER PAINTERS INSTITUTE,
CAGE L0035
(MPI) TESTING FACILITY ADDRESS
115 TECHNOLOGY DR.
PITTSBURGH PA 15275
TO DETERMINE ACCEPTABLE APPROVED PRODUCTS LIST
GO TO
http://www.specifypaint.com/APL/paintinfoAPLnew/ProductIdxByMPInum.asp http://www.specifypaint.com/APL/paintinfoAPLnew/ProductIdxByMPInum.asp
TO DETERMINE ACCEPTABLE MPI GPS-1-08 APPROVED PRODUCTS LIST GO TO http://www.specifygreen.com/APL/ProductIdxByMPInum.asp http://www.specifygreen.com/APL/ProductIdxByMPInum.asp
THE MANUFACTURER FOR THE APL ITEM MUST BE APPROVED FOR THE APL ITEM AT THE TIME OF THE CONTRACT AWARD.
SPE8ES-27-T-0206
SECTION B
Hazard Communication Standard Notice:
Effective June 1, 2015, Federal Standard No. 313-E, Material Safety Data, Transportation Data and Disposal Data for Hazardous Materials Furnished to Government Activities, establishes the requirement for preparation and submission of Safety Data Sheets (SDS) in lieu of Material Safety Data Sheets (MSDS) by suppliers who provide hazardous materials to government activities.
The Occupational Safety and Health Administration (OSHA) has modified its Hazard Communication Standard (HCS) to conform to the United Nations Globally Harmonized System of Classification and Labeling of Chemicals. As a result of this change, GSA revised Federal Standard No. 313-E requiring Safety Data Sheets for classifying chemicals and communicating the applicable information on labels.
In accordance with the revised standard after June 1, 2015:
1. Suppliers will be required to submit, to the contracting officer for review and approval prior to award, safety data sheets consistent with the requirements found at 29 C.F.R. 1910.1200 for hazardous materials delivered to the Government.
2. Suppliers will also be required to submit, to the contracting officer for review and approval prior to award, Hazardous Communication Standard (HCS) labels in accordance with 29 C.F.R. 1910.1200 requirements or current Consumer Product Safety Act (CPSA), Federal Hazardous Substance Act (FHSA) labels when subject to labeling requirements under those statutes. This product labeling is required for hazardous materials delivered to the Government.
3. Finally, suppliers must train their employees on the new safety data sheets, hazardous communication labels, and requirements of 29 C.F.R. 1910.1200.
For more information on SDS, refer to OSHAs website, available at:
https://www.osha.gov/law-regs.html
For information on 29 C.F.R. 1910.1200, refer to the below link:
https://www.osha.gov/dsg/hazcom/index.html RS058: Shelf life requirement RS001 for a TYPE 2 (CODE 6) item with a shelf life of 24 month (extendable) applies to this item.
MASTER PAINTERS INSTITUTE, DETAILED PERFORMANCE STANDARD, MPI #8, ALKYD,
EXTERIOR FLAT (MPI GLOSS LEVEL 1), DATED 12/23/11.
COLOR: GREEN PER SAE AMS-STD-595, COLOR CHIP 34108
EXCEPTION(S) TO TECHNICAL DOCUMENT
IN ACCORDANCE WITH THE UNIFORM FACILITIES GUIDE SPECIFICATIONS,
UFGS-09900, DATED FEBRUARY 2002, DIVISION 09 FINISHES, SECTION 09900,
PAINTS AND COATINGS, THE CURRENT MPI "APPROVED PRODUCT LIST" WHICH LISTS
PAINT BY BRAND, LABEL, PRODUCT NAME AND PRODUCT CODE AS OF THE DATE OF
CONTRACT AWARD, WILL BE USED TO DETERMINE COMPLIANCE WITH THE SUBMITTAL
REQUIREMENTS OF THIS SPECIFICATION. NO VARIATION FROM THE MPI APPROVED
PRODUCTS LIST IS ACCEPTABLE.
URL TO DETERMINE ACCEPTABLE APPROVED PRODUCT LIST:
HTTP://WWW.SPECIFYPAINT.COM/APL/PAINTINFOAPL/PRODUCTIDXBYMPINUM.ASP
URL TO DETERMINE ACCEPTABLE MPI GPS-1-08 APPROVED PRODUCT LIST:
HTTP://WWW.SPECIFYGREEN.COM/APL/PRODUCTIDXBYMPINUM.ASP
SPE8ES-27-T-0206
SECTION B
MIL-STD-129 LABELS ARE REQUIRED, MIL-STD-129 LABEL WILL INCLUDE THE
ADDITION OF LOT OR BATCH NUMBER.
TDP Rev A Gen 1 IAW BASIC NON GOVT STD MPI #8 REVISION NR DTD 05/01/2014 PART PIECE NUMBER: MPI 8-001G-34108
TDP Rev A Gen 1 IAW REFERENCE STD NR MIL-STD-129R(3) REVISION NR R DTD 02/25/2023 PART PIECE NUMBER:
TDP Rev A Gen 1 IAW REFERENCE STD NR MIL-STD-147F NOT 1 REVISION NR F DTD 09/05/2024 PART PIECE NUMBER:
TDP Rev A Gen 1 IAW REFERENCE STD NR MIL-STD-2073-1E(4) NOT 1 REVISION NR E DTD 06/27/2024 PART PIECE NUMBER:
TDP Rev A Gen 1 IAW REFERENCE UNK FED-STD-313F REVISION NR F DTD 10/12/2018 PART PIECE NUMBER:
TDP Rev A Gen 1 IAW REFERENCE UNK FED-STD-595C(1) NOT 2 REVISION NR C DTD 02/14/2017 PART PIECE NUMBER:
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7018872821 0001 GL 5.000
NSN/MATERIAL:8010002970554
DELIVERY (IN DAYS):0020
DELIVER FOB: DESTINATION
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:HM CLNG/DRY:1 PRESV MAT:00
WRAP MAT:ZZ CUSH/DUNN MAT:ZZ CUSH/DUNN THKNESS:C
UNIT CONT:ZZ OPI:M
INTRMDTE CONT:D3 INTRMDTE CONT QTY:004
PACK CODE:U
SPE8ES-27-T-0206
SECTION B
PR: 7018872821 PRLI: 0001 CONT’D
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:33 -33 Type II, shelf life
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
IP025: PACKAGING, MARKING, AND SHIPPING OF HAZARDOUS MATERIALS
UNIT OF ISSUE: GL (GL EQUALS GALLON/ 3.79 LITERS)
Material shall be furnished in round containers with multiple friction closure of the type normally used for the product. Filled containers shall be closed in a manner that will insure that the contents will not spill or leak from the container during shipment, handling, storage and redistribution.
All containers shall be constructed so that there will be no interaction chemically or physically with the contents that damages the container or alters the strength, quality or purity of the contents.
One gallon containers shall be provided with a bail type handle in accordance with current Good Manufacturing Practices.
BULK BREAK POINT:
W91TK9
0160 AV BN 03 CO D AVUM-AVIM
BLDG 7909 NORTH LIGHTNING RD
3BN 160TH TECH SUPPLY
HUNTER AAF GA 31409-0000
US
RDD 777 SHIPMENT. SHIP BY FASTEST TRACEABLE MEANS. DO NOT USE PARCEL POST.
FREIGHT SHIPPING ADDRESS:
W91TK9
0160 AV BN 03 CO D AVUM-AVIM
BLDG 7909 NORTH LIGHTNING RD
3BN 160TH TECH SUPPLY
HUNTER AAF GA 31409-0000
US
MARKFOR
W91TK9
0160 AV BN 03 CO D AVUM-AVIM
BLDG 7909 NORTH LIGHTNING RD
3BN 160TH TECH SUPPLY
HUNTER AAF GA 31409-0000
US
M/F: (TCN) W91TK962930467
RDD: 777
PROJ: TP 2
SUPP ADD: W33NYN SIG: A
SPE8ES-27-T-0206
SECTION B
PR: 7018872821 PRLI: 0001 CONT’D
FOR GOVERNMENT USE ONLY: (IPD) 05
DIC: A0A DIST: ADV: FC: ZY
Need Ship Date:00/00/0000 Original Required Delivery Date:10/29/2026
SPE8ES-27-T-0206 NSN/Part Number: 8010-00-297-0554 Quantity: 5 GL Purchase Request: 7018872821QTY: 5 Delivery: 20 days ADO
ENAMEL
RD003, COVERED DEFENSE INFORMATION POTENTIALLY APPLIES
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RQ016: COMPONENT QUALIFIED PRODUCTS LISTS (QPL)/QUALIFIED MANUFACTURERS
LISTS (QML). THIS ITEM CONTAINS ONE OR MORE COMPONENTS DEFINED BY A
SPECIFICATION(S) WITH AN ASSOCIATED QUALIFIED PRODUCTS LIST (QPL) OR
QUALIFIED MANUFACTURERS LIST (QML). QUALIFICATION REQUIREMENTS IN
PROCUREMENT NOTE H02 "COMPONENT QUALIFIED PRODUCTS LIST (QPL)/QUALIFIED
MANUFACTURERS LIST (QML)" APPLY.
RQ017: PHYSICAL IDENTIFICATION/BARE ITEM MARKING
RQ034: HAZARDOUS COMMUNICATION STANDARD NOTICE
IN ACCORDANCE WITH THE UNIFORM FACILITIES GUIDE SPECIFICATIONS,
UFGS-09900, DATED FEB 2002, DIVISION 09 FINISHES, SECTION 09900,
PAINTS AND COATINGS, THE CURRENT MPI "APPROVED PRODUCTS LIST" WHICH
LISTS PAINT BY BRAND, LABEL, PRODUCT NAME AND PRODUCT CODE AS OF THE
DATE OF CONTRACT AWARD, WILL BE USED TO DETERMINE COMPLIANCE WITH THE
SUBMITTAL REQUIREMENTS OF THIS SPECIFICATION. NO VARIATION FROM THE MPI
APPROVED PRODUCTS LIST IS ACCEPTABLE.
THIS NSN HAS APPROVED PRODUCTS LIST (APL) REQUIREMENTS. THE (APL)
DOCUMENT IS PUBLISHED AND MAINTAINED BY THE MASTER PAINTERS INSTITUTE,
CAGE L0035
(MPI) TESTING FACILITY ADDRESS
115 TECHNOLOGY DR.
PITTSBURGH PA 15275
TO DETERMINE ACCEPTABLE APPROVED PRODUCTS LIST
GO TO
http://www.specifypaint.com/APL/paintinfoAPLnew/ProductIdxByMPInum.asp http://www.specifypaint.com/APL/paintinfoAPLnew/ProductIdxByMPInum.asp
TO DETERMINE ACCEPTABLE MPI GPS-1-08 APPROVED PRODUCTS LIST GO TO http://www.specifygreen.com/APL/ProductIdxByMPInum.asp http://www.specifygreen.com/APL/ProductIdxByMPInum.asp
THE MANUFACTURER FOR THE APL ITEM MUST BE APPROVED FOR THE APL ITEM AT THE TIME OF THE CONTRACT AWARD.
SPE8ES-27-T-0206
SECTION B
Hazard Communication Standard Notice:
Effective June 1, 2015, Federal Standard No. 313-E, Material Safety Data, Transportation Data and Disposal Data for Hazardous Materials Furnished to Government Activities, establishes the requirement for preparation and submission of Safety Data Sheets (SDS) in lieu of Material Safety Data Sheets (MSDS) by suppliers who provide hazardous materials to government activities.
The Occupational Safety and Health Administration (OSHA) has modified its Hazard Communication Standard (HCS) to conform to the United Nations Globally Harmonized System of Classification and Labeling of Chemicals. As a result of this change, GSA revised Federal Standard No. 313-E requiring Safety Data Sheets for classifying chemicals and communicating the applicable information on labels.
In accordance with the revised standard after June 1, 2015:
1. Suppliers will be required to submit, to the contracting officer for review and approval prior to award, safety data sheets consistent with the requirements found at 29 C.F.R. 1910.1200 for hazardous materials delivered to the Government.
2. Suppliers will also be required to submit, to the contracting officer for review and approval prior to award, Hazardous Communication Standard (HCS) labels in accordance with 29 C.F.R. 1910.1200 requirements or current Consumer Product Safety Act (CPSA), Federal Hazardous Substance Act (FHSA) labels when subject to labeling requirements under those statutes. This product labeling is required for hazardous materials delivered to the Government.
3. Finally, suppliers must train their employees on the new safety data sheets, hazardous communication labels, and requirements of 29 C.F.R. 1910.1200.
For more information on SDS, refer to OSHAs website, available at:
https://www.osha.gov/law-regs.html
For information on 29 C.F.R. 1910.1200, refer to the below link:
https://www.osha.gov/dsg/hazcom/index.html RS058: Shelf life requirement RS001 for a TYPE 2 (CODE 6) item with a shelf life of 24 month (extendable) applies to this item.
MASTER PAINTERS INSTITUTE, DETAILED PERFORMANCE STANDARD, MPI #8, ALKYD,
EXTERIOR FLAT (MPI GLOSS LEVEL 1), DATED 12/23/11.
COLOR: GREEN PER SAE AMS-STD-595, COLOR CHIP 34108
EXCEPTION(S) TO TECHNICAL DOCUMENT
IN ACCORDANCE WITH THE UNIFORM FACILITIES GUIDE SPECIFICATIONS,
UFGS-09900, DATED FEBRUARY 2002, DIVISION 09 FINISHES, SECTION 09900,
PAINTS AND COATINGS, THE CURRENT MPI "APPROVED PRODUCT LIST" WHICH LISTS
PAINT BY BRAND, LABEL, PRODUCT NAME AND PRODUCT CODE AS OF THE DATE OF
CONTRACT AWARD, WILL BE USED TO DETERMINE COMPLIANCE WITH THE SUBMITTAL
REQUIREMENTS OF THIS SPECIFICATION. NO VARIATION FROM THE MPI APPROVED
PRODUCTS LIST IS ACCEPTABLE.
URL TO DETERMINE ACCEPTABLE APPROVED PRODUCT LIST:
HTTP://WWW.SPECIFYPAINT.COM/APL/PAINTINFOAPL/PRODUCTIDXBYMPINUM.ASP
URL TO DETERMINE ACCEPTABLE MPI GPS-1-08 APPROVED PRODUCT LIST:
HTTP://WWW.SPECIFYGREEN.COM/APL/PRODUCTIDXBYMPINUM.ASP
SPE8ES-27-T-0206
SECTION B
MIL-STD-129 LABELS ARE REQUIRED, MIL-STD-129 LABEL WILL INCLUDE THE
ADDITION OF LOT OR BATCH NUMBER.
TDP Rev A Gen 1 IAW BASIC NON GOVT STD MPI #8 REVISION NR DTD 05/01/2014 PART PIECE NUMBER: MPI 8-001G-34108
TDP Rev A Gen 1 IAW REFERENCE STD NR MIL-STD-129R(3) REVISION NR R DTD 02/25/2023 PART PIECE NUMBER:
TDP Rev A Gen 1 IAW REFERENCE STD NR MIL-STD-147F NOT 1 REVISION NR F DTD 09/05/2024 PART PIECE NUMBER:
TDP Rev A Gen 1 IAW REFERENCE STD NR MIL-STD-2073-1E(4) NOT 1 REVISION NR E DTD 06/27/2024 PART PIECE NUMBER:
TDP Rev A Gen 1 IAW REFERENCE UNK FED-STD-313F REVISION NR F DTD 10/12/2018 PART PIECE NUMBER:
TDP Rev A Gen 1 IAW REFERENCE UNK FED-STD-595C(1) NOT 2 REVISION NR C DTD 02/14/2017 PART PIECE NUMBER:
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7018872821 0001 GL 5.000
NSN/MATERIAL:8010002970554
DELIVERY (IN DAYS):0020
DELIVER FOB: DESTINATION
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:HM CLNG/DRY:1 PRESV MAT:00
WRAP MAT:ZZ CUSH/DUNN MAT:ZZ CUSH/DUNN THKNESS:C
UNIT CONT:ZZ OPI:M
INTRMDTE CONT:D3 INTRMDTE CONT QTY:004
PACK CODE:U
SPE8ES-27-T-0206
SECTION B
PR: 7018872821 PRLI: 0001 CONT’D
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:33 -33 Type II, shelf life
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
IP025: PACKAGING, MARKING, AND SHIPPING OF HAZARDOUS MATERIALS
UNIT OF ISSUE: GL (GL EQUALS GALLON/ 3.79 LITERS)
Material shall be furnished in round containers with multiple friction closure of the type normally used for the product. Filled containers shall be closed in a manner that will insure that the contents will not spill or leak from the container during shipment, handling, storage and redistribution.
All containers shall be constructed so that there will be no interaction chemically or physically with the contents that damages the container or alters the strength, quality or purity of the contents.
One gallon containers shall be provided with a bail type handle in accordance with current Good Manufacturing Practices.
BULK BREAK POINT:
W91TK9
0160 AV BN 03 CO D AVUM-AVIM
BLDG 7909 NORTH LIGHTNING RD
3BN 160TH TECH SUPPLY
HUNTER AAF GA 31409-0000
US
RDD 777 SHIPMENT. SHIP BY FASTEST TRACEABLE MEANS. DO NOT USE PARCEL POST.
FREIGHT SHIPPING ADDRESS:
W91TK9
0160 AV BN 03 CO D AVUM-AVIM
BLDG 7909 NORTH LIGHTNING RD
3BN 160TH TECH SUPPLY
HUNTER AAF GA 31409-0000
US
MARKFOR
W91TK9
0160 AV BN 03 CO D AVUM-AVIM
BLDG 7909 NORTH LIGHTNING RD
3BN 160TH TECH SUPPLY
HUNTER AAF GA 31409-0000
US
M/F: (TCN) W91TK962930467
RDD: 777
PROJ: TP 2
SUPP ADD: W33NYN SIG: A
SPE8ES-27-T-0206
SECTION B
PR: 7018872821 PRLI: 0001 CONT’D
FOR GOVERNMENT USE ONLY: (IPD) 05
DIC: A0A DIST: ADV: FC: ZY
Need Ship Date:00/00/0000 Original Required Delivery Date:10/29/2026
SPE8ES-27-T-0206 NSN/Part Number: 8010-00-297-0554 Quantity: 5 GL Purchase Request: 7018872821QTY: 5 Delivery: 20 days ADO
Similar Contracts
Same NAICS industry code
More opportunities from Department Of Defense → Defense Logistics Agency
Same awarding agency
Earlier notices in this NAICS code
Posted before this notice, open and closed
Ready to Pursue This Opportunity?
Get AI-powered intelligence on this solicitation and the ones like it
Every page of the solicitation package shredded into a compliance breakdown
AI-powered matching based on your capabilities and past performance
Competitor and incumbent history on the requirement
Automated alerts on amendments, Q&A deadlines, and award
Join 750+ contractors already using CLEATUS