Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

Engine Head Machining and Fitting Services

Open

International

Response Deadline11/17/2026, 11:00:00 AM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract opportunity with Pakistan Refinery Limited involves providing precision machining and complete fitting services for 4-cylinder and 6-cylinder engine heads. The selected contractor will utilize milling, grinding, and surfacing equipment to restore engine heads to a condition where they are fully machined, fitted, and ready for immediate installation. Interested parties must demonstrate proven expertise in engine machining and provide documentation of past work orders to qualify. The solicitation was posted on November 6, 2026, with a response deadline of November 17, 2026. All work will be performed in Pakistan under NAICS code 332710.

General Info

Agency

Pakistan Refinery Limited

NAICS

332710 - Machine Shops

Place of Performance

PAK

Set-Aside

NONE

Documents

This scope was carved out of Doc343438821.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

6000070490 Annual Contract for Misc. Maintenance and Machining - Mobile Workshop

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedNov 6

subcontract

Response DeadlineNov 17

Submission deadline

Response Deadline

11/17/2026, 11:00:00 AM UTCin 11 days

Ready to pursue this opportunity?

Get full access to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyPakistan Refinery Limited

ContactsNo contacts available

OfficeN/A

Organization / AgencyPakistan Refinery Limited

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Performs precision machining and complete fitting of 4-cylinder and 6-cylinder engine heads for prime contractors on Pakistan Refinery Limited maintenance projects. Utilizes milling, grinding, or surfacing equipment to restore engine heads. Requires proven expertise in engine machining and submission of past work orders. Delivers fully machined and fitted engine heads ready for installation.

Similar Contracts

Same NAICS industry code

CABLE ASSEMBLY,INTE

Solicitation # N0038327RAA26

This negotiated solicitation, issued by NAVSUP Weapon Systems Support Philadelphia, seeks a contractor to perform the teardown, evaluation, repair, and modification of 81 units of Cable Assembly, Inte (NSN 4920-01-600-4479). The primary objective is to return these items to a Ready for Issue condition through inspection, component replacement, and testing. The contractor is responsible for providing all necessary facilities, labor, materials, and tooling, as the government will not provide manufacturing aids. Specific technical constraints include a strict prohibition on the use of MIL-W-81381 wire, requiring the use of SAE-AS22759 series wire instead, and a requirement for personnel to be certified under IPC/EIAJ-STD-001C if MIL-STD-454 is referenced. The contract establishes rigorous quality and administrative standards, requiring compliance with ISO 9001 and SAE AS9100 quality systems and ANSI/NCSL Z540.3 or ISO-10012-1 calibration standards. Key contractual provisions include specific protocols for Beyond Economical Repair and Missing on Induction determinations, both of which require written concurrence from DCMA. Award will be made to a single offeror based on a best-value determination, with past performance weighted as more important than price. Deliverables must be preserved and marked according to MIL-STD-2073 and MIL-STD-129, with final inspection and acceptance occurring at the origin. Invoicing and payment will be processed electronically through the Wide Area Workflow system.

Navsup Weapon Systems Support

POSTED

about 5 hours ago

DEADLINE

49--ADAPTER, TEST, HARM, IN REPAIR/MODIFICATION OF

Solicitation # N0038326QLA42

This solicitation from NAVSUP Weapon Systems Support is for the repair, teardown, evaluation, and modification of the HARM Test Adapter (NSN 4920-01-623-8515, Part Number 74D755036-1005). The scope of work requires the contractor to return units to a Ready For Issue condition using approved repair manuals and technical specifications. A recent amendment increased the repair quantity from three to four units. The government seeks quotes based on either firm-fixed pricing or Test, Trial, and Evaluation pricing. The award will be limited to government-approved sources, and the Small Business Administration has determined that a set-aside recommendation is not applicable for this procurement. The contractor must maintain a quality system conforming to ISO 9001/SAE AS9100 and a calibration system meeting ANSI/NCSL Z540.3 or ISO-10012-1. Key contractual provisions include a Beyond Economical Repair threshold set at 75% of the current production replacement price and strict requirements for Missing on Induction and Over and Above repair determinations, both of which require DCMA concurrence. Deliveries are required within 90 days on a FOB Destination basis. Evaluation for award will be based on a single award to the most advantageous offeror, with past performance weighted as the primary factor over price. Packaging must adhere to MIL-STD-2073 and marking must comply with MIL-STD-129.

Navsup Weapon Systems Support

POSTED

about 5 hours ago

DEADLINE

in about 5 hours

Sign Hardware & Mounting SupplierThis subcontract opportunity is for a Sign Hardware and Mounting Supplier to provide essential structural components for traffic signage on County of San Mateo projects. The selected supplier will be responsible for delivering sign posts, hardware, brackets, and mounts to prime contractors to ensure the secure installation of signage. Eligible bidders must not be debarred or suspended by any Federal or State of California agencies. The solicitation was posted on November 5, 2026, with a response deadline of December 1, 2026. This procurement falls under NAICS code 332710 and is managed through the California Procurement agency.

POSTED

about 18 hours ago

DEADLINE

Fabrication of Rigid Connecting Links (Aluminum Alloy)This subcontract involves the precision machining of 10 aluminum alloy rigid connecting links for the DLA Weapons Support Land Supply Chain. The contractor is required to manufacture components according to NSN 3040-00-011-682 specifications using CNC equipment and calibrated measuring and test equipment. Performance will take place in San Diego, California, under NAICS code 332710. Strict adherence to quality standards RA001, RQ001, and RQ002 is mandatory. Additionally, the provider must maintain JCP certification and ensure full compliance with ITAR and EAR regulations to handle the necessary technical data. The response deadline for this requirement is November 16, 2026.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

about 24 hours ago

DEADLINE

Manufacture of Shouldered Shafts (NSN 0001S00000053)This subcontract involves the manufacture of precision shouldered shafts for prime contractors supporting DLA Weapons Support Land Supply Chain contracts. The work requires precision machining and turning to meet NSN 0001S00000053 specifications, utilizing CNC machining centers and precision grinding equipment. A critical requirement of the contract is the execution of a First Article Test to validate all manufacturing processes and ensure strict compliance with Department of Defense quality standards. The project is categorized under NAICS code 332710 and will be performed in New Cumberland. Interested parties must adhere to the response deadline of November 16, 2026. The final deliverable consists of finished shouldered shafts that meet all specified technical and quality benchmarks.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

about 24 hours ago

DEADLINE

Manufacture of Shoulder Shaft (NSN 3040007708384)This subcontract involves the manufacture and supply of shoulder shafts for prime contractors supporting DLA Weapons Support Land Supply Chain contracts. The contractor is responsible for producing the components to meet the technical specifications of NSN 3040007708384 using approved methods such as casting, forging, or additive manufacturing. The process requires precision machining and specialized tooling to ensure the shafts are properly shouldered. Deliverables include the finished shoulder shafts and all necessary Safety Data Sheets in compliance with 29 CFR 1910.1200(g) and Federal Standard No. 313. The performance of this contract is centered in Tracy, California, under NAICS code 332710. Interested parties must respond by November 16, 2026.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

about 24 hours ago

DEADLINE

Precision Machining of Sleeve Bushings (NSN 3120-01-115-3781)This subcontract involves the precision fabrication of 75 sleeve bushings for prime contractors supporting the DLA Weapons Support ASC Commodities Division. The project requires the production of units according to Drawing NR 19200 12524213-9 and 19200 12534956 using CNC machining, with a strict prohibition on the use of additive manufacturing. All finished bushings must be fully inspected prior to delivery. To be eligible, the manufacturer must hold ISO 9001:2015 certification and be approved under the US/Canada Joint Certification Program to handle ITAR and EAR regulated data. The work is categorized under NAICS code 332710 and will be performed in New Cumberland. Responses to this solicitation are due by November 13, 2026.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 24 hours ago

DEADLINE

Precision Shaft Manufacturing (NSN 3040011216084)This subcontract involves the precision fabrication of two shafts for Stewart and Stevenson Model 16-114D001 diesel engines, supporting prime contractors for the DLA Weapons Support LSO Combat Vehicles and Armament. The work requires precision CNC machining according to NSN 3040011216084 specifications and strict adherence to MIL-STD-973 configuration control and MIL-STD 130/MIL-STD-129 marking standards. Additionally, the manufacturer must ensure that no mercury is added to the materials. The project falls under NAICS code 332710 and is managed by the Department of Defense. Interested parties must respond by November 16, 2026, to fulfill the requirement for the delivery of finished and inspected components.

DLA WEAPONS SUPPORT LSO COMBAT VEHICLES AND ARMAMENT

POSTED

about 24 hours ago

DEADLINE

Precision Fabrication of Seal 'T' Rods (NSN 5330-01-204-5577)This subcontract involves the precision fabrication of 54 Seal T Rods under NSN 5330-01-204-5577 for the DLA Weapons Support Nuclear Reactor Program. The contractor is responsible for manufacturing these units in strict accordance with the technical data package outlined in the DLA Master List RA001. Performance will take place in Tracy, California, under NAICS code 332710. The agreement mandates strict adherence to safety and regulatory standards, specifically prohibiting the use of asbestos or the intentional addition of mercury. Compliance with the Buy American Act per DFARS 252.225-7001 and cybersecurity requirements under DFARS 252.204-7012 is required. The final deliverable consists of 54 completed rods that meet all specified technical requirements.

DLA WEAPONS SUPPORT NUCLEAR REACTOR PROGRAM

POSTED

about 24 hours ago

DEADLINE

Manufacturer of Steel Street Elbows (NSN 4730-01-059-4126)This subcontract involves the manufacture and delivery of 128 steel street elbows for the Department of Defense, specifically supporting the DLA Weapons Support Fluid Handling Division. The required components must feature a 90-degree flow angle, a 1-1/4 inch nominal pipe size, and female NPTF to male NPTF threads capable of withstanding a 3000 PSI pressure rating. The use of additive manufacturing is strictly prohibited for the production of these fittings. To be eligible, the provider must maintain US/Canada Joint Certification Program certification and ensure full compliance with ITAR and EAR regulations. The project is categorized under NAICS code 332710, with performance taking place in New Cumberland. Interested parties must respond by November 16, 2026.

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

about 24 hours ago

DEADLINE

Manufacturer of Steel Tube Caps (NSN 4730013592430)This subcontract involves the manufacture and delivery of 1,863 steel tube caps for the Department of Defense, specifically supporting the DLA Weapons Support Fluid Handling Division. The contractor is responsible for fabricating the components using precision machining or forming equipment to ensure full compliance with technical standards SAE J1453-3 and SAE J1453-1-2012. The agreement mandates strict adherence to the Buy American Act and prohibits the use of Class I ozone depleting chemicals during production. Performance of the contract will take place in New Cumberland, Pennsylvania, under NAICS code 332710.

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

about 24 hours ago

DEADLINE

Precision Retaining Ring FabricationThis subcontract involves the precision fabrication of two high-precision retaining rings for the DLA Weapons Support ASC Commodities Division. The rings must be manufactured using precision CNC machining in strict accordance with L3 Technologies PN 011873 and NSN 5325010581858 specifications. Quality assurance is critical, requiring adherence to mercury-free mandates and zero-based sampling plans as defined by MIL-STD-1916 or ASQ H1331. The contractor must maintain full compliance with DFARS 252.204-7012 and the Buy American program. Performance of the contract will take place in Tracy, California. Interested parties must respond by November 13, 2026, under NAICS code 332710.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 24 hours ago

DEADLINE

More opportunities from Pakistan Refinery Limited

Same awarding agency

Heat Exchanger and Cooler Internal CleaningThis subcontract involves the internal cleaning and descaling of oil, coolant, and charge air coolers for prime contractors working on Pakistan Refinery Limited maintenance projects. The objective is to restore thermal efficiency through the application of chemical cleaning agents, high-pressure flushing, or the use of ultrasonic cleaning tanks. The selected provider must possess specialized experience in industrial heat exchanger cleaning to ensure all units are properly cleaned and inspected. The opportunity is hosted by Pakistan Refinery Limited for performance within Pakistan. Interested parties must submit their responses by November 17, 2026. This project falls under NAICS code 562910 and focuses on the delivery of fully restored and inspected cooling equipment.

Remediation Services

POSTED

about 13 hours ago

DEADLINE

Fuel Injector and Pump Calibration ServicesThis subcontract for Pakistan Refinery Limited involves the professional servicing, calibration, and repair of fuel injection systems. The selected provider will support prime contractors on maintenance projects by utilizing specialized repair kits and test benches to calibrate fuel injector pumps and nozzles specifically for 4 and 6 cylinder engines. The contract requires a provider with proven expertise in fuel system calibration to ensure the precise delivery of serviced components. Interested parties must respond by November 17, 2026, for work to be performed within Pakistan.

General Automotive Repair

POSTED

about 13 hours ago

DEADLINE

6000070490 Annual Contract for Misc. Maintenance and Machining - Mobile Workshop

Solicitation # Doc343438821

Pakistan Refinery Limited has issued solicitation 6000070490 for an annual one-year contract focused on miscellaneous maintenance and machining for mobile workshop equipment. The scope of work includes the machining and fitting of engine heads for 4 and 6 cylinder engines, servicing and calibration of fuel injector pumps and nozzles, and internal cleaning of oil, coolant, and charge air coolers. A critical performance requirement is the vendor's ability to mobilize resources and provide services within 24 hours of receiving a service request or callout. The contractor is also required to provide detailed service reports for all activities performed against each contract line item. To qualify for the award, vendors must demonstrate proven expertise and experience by submitting supporting documentation, including copies of past purchase or work orders for similar services. Attendance at the pre-bid meeting is mandatory, as failure to attend may lead to disqualification. The evaluation process focuses on the vendor's technical experience and their capacity to meet the strict 24-hour mobilization window. The solicitation was posted on November 6, 2026, with a response deadline of November 17, 2026.

Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and Maintenance

POSTED

about 13 hours ago

DEADLINE

NexaVM Technical Support ProviderThis subcontract agreement establishes a partnership for the provision of specialized technical support for Pakistan Refinery Limited virtualization projects. The selected provider will be responsible for delivering 24/7 on-site technical assistance, security patching, and software updates specifically for the NexaVM environment across the Korangi and Keamari sites. To ensure system stability and uptime maintenance in accordance with product code nSTS-12M, the contractor must deploy NexaVM certified technical support engineers. The opportunity is managed by Pakistan Refinery Limited and is categorized under NAICS code 541519. Interested parties must submit their responses by November 12, 2026, to be considered for this critical infrastructure support role within Pakistan.

Other Computer Related Services

POSTED

DEADLINE

NexaVM Virtualization Implementation SpecialistThis subcontract opportunity is for a NexaVM Virtualization Implementation Specialist to provide technical installation, configuration, and deployment services for Pakistan Refinery Limited. The scope of work involves implementing NexaSphere at the Korangi Head Office and Keamari Terminal, with specific requirements to configure High Availability, Distributed Resource Scheduler, and Integrated VM Backup. Additionally, the specialist will be responsible for executing VM migrations across Gen6 Processors and older hardware to deliver a fully operational, Go-Live virtualized server environment. Eligible candidates must be authorized NexaVM implementation partners with a minimum of five years of relevant experience. The project is based in Pakistan and falls under NAICS code 541512. Interested parties must submit their responses by November 12, 2026.

Computer Systems Design Services

POSTED

DEADLINE

NexaVM Software License SupplierThis subcontract opportunity is for an authorized NexaVM licensing partner to provide perpetual software licenses for prime contractors working on virtualization projects for Pakistan Refinery Limited. The scope includes NexaSphere licenses compatible with Gen6 Processors and older versions, featuring critical capabilities such as High Availability, DRS, Automated Hot-Add, Integrated VM Backup, Snapshots, Live Migration, and Bulk VM Creation. Additionally, the supplier must provide VM-based perpetual licenses for 10 sockets to facilitate multi-platform migration and deliver all necessary software license keys and entitlements. The solicitation was posted on October 29, 2026, with a response deadline of November 12, 2026. The project is based in Pakistan and falls under NAICS code 513210. Interested parties must ensure they meet the specific partnership requirements for NexaVM to be eligible for this contract.

Software Publishers

POSTED

DEADLINE

LICENSES AND IMPLEMENTATION OF VIRTUAL MACHINE SOLUTION (NexaVM SOLUTION) WITH ONE YEAR SUPPORT

Solicitation # Doc342727235

Pakistan Refinery Limited is seeking a qualified contractor for the licensing, implementation, and technical support of the NexaVM Virtual Machine solution. The project covers two primary locations: the Korangi Head Office and the Keamari Terminal. The scope of work includes a three-month implementation period, one year of license validity, and one year of 24/7 on-site technical support following the go-live date. To be eligible, bidders must be authorized NexaVM implementation and licensing partners with at least five years of experience in NexaVM services. Bids must remain valid for ninety days from the commercial bid opening. Payment terms are set at net thirty days from the submission of a complete invoice, based on actual work verified by the agency, with no advance payments permitted. All quoted rates must be inclusive of all costs, expenses, and taxes.

Computer Systems Design Services

POSTED

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS