Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, September 30 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

Engine Lathe Supplier

Active

Federal

Response Deadline09/28/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract opportunity is issued by the Department of Defense in San Diego for the procurement of one engine lathe to support prime contractors delivering DLA supply contracts. The selected supplier must manufacture or source a lathe that adheres to the DLA Master List RA001 technical requirements and quality assurance standards, ensuring the equipment is free of non-accepted government identification. The contract requires strict compliance with MIL-STD-129 for marking and ASTM-D-3951-98 for commercial packaging to ensure the item is delivered fully operational. This opportunity is designated as a Women-Owned Small Business set-aside under NAICS code 333517, with a response deadline of September 28, 2026.

General Info

DoD seeks a Women-Owned Small Business to provide one engine lathe by 2026.

Agency

Department Of Defense → SAN DIEGOView Agency

NAICS

333517 - Machine Tool ManufacturingView NAICS

Place of Performance

SAN DIEGO, CA, 92136-3581, USA

Set-Aside

WOSB

Documents

This scope was carved out of SPE8E5-26-T-4391.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

LATHE, ENGINE

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedSep 16

subcontract

Response DeadlineSep 28

Submission deadline

Response Deadline

09/28/2026, 05:00:00 PM UTCin 12 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → SAN DIEGO

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → SAN DIEGO

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Supplies one engine lathe for prime contractors delivering DLA supply contracts. Manufactures or sources an engine lathe meeting DLA Master List (RA001) technical requirements and quality assurance standards. Ensures item is free of non-accepted government identification. Complies with MIL-STD-129 for marking and ASTM-D-3951-98 for commercial packaging. Delivers one fully operational, packaged, and marked engine lathe.

Similar Contracts

Same NAICS industry code

Turbine Rotor Gage SupplierThis subcontract involves the supply of 7,000 precision Turbine Rotor Gages, identified by NSN 5220005885992, for the Department of Defense at the DDSP New Cumberland Facility. The supplier is responsible for manufacturing or sourcing the gages according to strict technical specifications, utilizing precision machining and calibration equipment to ensure accuracy. Compliance requirements include the provision of Safety Data Sheets in accordance with 29 CFR 1910.1200(g) and the generation of receiving reports as mandated by DFARS Appendix F. The opportunity falls under NAICS code 333517, with a response deadline of September 28, 2026.

DDSP NEW CUMBERLAND FACILITY

POSTED

about 9 hours ago

DEADLINE

REAMER, MACHINE

Solicitation # SPE8E5-26-T-4360

DLA DIST SAN JOAQUIN

POSTED

about 9 hours ago

DEADLINE

BRAKE MACHINE, SHEET ME

Solicitation # SPE8E5-26-T-4349

Solicitation SPE8E5-26-T-4349 is a request for quotations issued by DLA Troop Support Construction and Equipment for the procurement of nine hand-operated sheet metal brake machines. The required equipment consists of bench-mounted box-pan brakes with removable fingers, constructed from 16 gage metal and measuring 36 inches wide, categorized as Type II, Class 2 Size 02. The procurement is fully competitive and adheres to specific military and federal specifications, including a strict prohibition on the intentional addition of mercury or mercury-containing compounds. Deliverables include the equipment and associated ship manuals as specified in the Contract Data Requirements Lists. The delivery period is 167 days, with a need ship date of March 15, 2027, for delivery to the DLA Distribution DDSP New Cumberland facility in Pennsylvania. Inspection and acceptance will occur at the destination. Packaging must comply with MIL-STD-2073-1E and RP001, while marking must follow MIL-STD-129. The contract incorporates various FAR and DFARS clauses, including requirements for safeguarding covered defense information, Buy American Act compliance, and a price evaluation preference for certified HUBZone small businesses. Invoicing and payment must be processed electronically through the Wide Area WorkFlow system.

DDSP NEW CUMBERLAND FACILITY

POSTED

about 9 hours ago

DEADLINE

Solicitation # SPE8E6-26-T-4657

DDSP NEW CUMBERLAND FACILITY

POSTED

about 9 hours ago

DEADLINE

Solicitation # SPE8E5-26-T-4391

Solicitation SPE8E5-26-T-4391 is a Request for Quotations issued by DLA Troop Support Construction and Equipment for the procurement of one engine lathe, identified by NSN 3416-01-231-1788. This procurement is specifically set aside for Women-Owned Small Business concerns eligible under the WOSB Program. The required delivery date is February 7, 2027, with a need ship date of March 15, 2027, and a delivery lead time of 167 days after order. The item is to be delivered FOB Origin to DLA Distribution San Diego, California. The contract mandates strict adherence to technical and quality requirements, including the prohibition of intentionally added mercury and compliance with the Buy American Act and Berry Amendment. Packaging must follow ASTM-D-3951-98 and MIL-STD-129 for marking and labeling, utilizing new and unused unit containers. Inspection and acceptance will occur at the destination. Administrative requirements include electronic invoicing via the Wide Area WorkFlow system and compliance with various FAR and DFARS clauses regarding subcontracting, cybersecurity, and hazardous material identification.

POSTED

about 9 hours ago

DEADLINE

Engine Lathe Equipment SupplierThis subcontract, managed by the Office of Centralized Acquisition Services for the General Services Administration, requires the supply of three engine lathes, including Standard and Toolroom/Precision models with horizontal spindles. Each machine must meet specific Technical Matrix specifications and include one removable steady rest and two removable toolholders. The supplier is responsible for providing comprehensive technical data in both electronic and hard copy formats. The contract is designated as a Total Small Business Set Aside under NAICS code 333517. All equipment and deliverables must strictly comply with industry standards, including ASME, ANSI, NEMA, ISO, ASTM-D-3951, and MIL-STD-129. The final delivery consists of three fully equipped engine lathes accompanied by all required documentation.

Office Of Centralized Acquisition Services

POSTED

about 14 hours ago

DEADLINE

3417--VRE purchase for a Veteran of Portland VBA Regional Office

Solicitation # 36C10D26Q0210

This presolicitation notice from the Department of Veterans Affairs, Veterans Benefits Administration, is for a purchase intended for a Veteran at the Portland VBA Regional Office. The opportunity is designated as a 100% set-aside for Service-Disabled Veteran-Owned Small Businesses under NAICS code 333517. The place of performance is located in Oregon City, Oregon, and the primary point of contact for the requirement is Contract Specialist Craig Harris. Interested vendors must submit their responses by the deadline of September 21, 2026, at 3:00 PM. The procurement will be conducted as a simplified acquisition, with the award based on the best value to the government and an evaluation of fair and reasonable pricing. All participating vendors are required to maintain active registrations in SAM.gov and SBA.gov.

Veterans Benefits Administration (36C10D)

POSTED

about 14 hours ago

DEADLINE

140-ton 10-foot Hydraulic Press Brake

Solicitation # W50S7L-26-Q-A004

Solicitation W50S7L-26-Q-A004 is a 100 percent Small Business Set-Aside for the procurement of one new Industrial CNC Hydraulic Press Brake with a capacity of 140 to 150 tons and a minimum 10-foot bending bed. The requirement is divided into two firm-fixed-price CLINs: the first for the machine itself and the second for turnkey logistics, including freight, rigging, installation, and operator training. The equipment must be manufactured in the United States, a DFARS qualifying country, or a TAA-compliant country, with a specific exclusion of equipment manufactured in the People's Republic of China. Key technical specifications include a maximum assembled footprint of 13 feet, a minimum weight of 14,000 lbs, and an integrated 2-axis CNC controller. The project will be performed in Great Falls, Montana, at Building 80 Aircraft Structural Maintenance shop. The government will provide the electrical drop and an on-site electrician for final connections, while the contractor is responsible for rigging and anchoring the machine to a flat concrete surface. Personnel requiring facility access must possess a Real ID and EAL. While the preferred delivery target was November 30, the government will evaluate technically compliant quotes with a firm delivery and installation completion date on or before December 31, 2026, with a final required delivery date updated to January 31, 2026. Award will be based on best value, and offerors must provide a completed pricing schedule, technical capability statement, and proof of TAA compliance.

W7NK Uspfo Activity Mtang 120

POSTED

about 14 hours ago

DEADLINE

in about 14 hours

Engine Lathe - Amendment 0003

Solicitation # 47QACA26Q0392

Solicitation 47QACA26Q0392 is a Request for Quote for a firm-fixed-price supply contract to provide three engine lathes for the United States Air Force Life Cycle Material Command. This acquisition is conducted under FAR Parts 12 and 13 as a total small business set-aside. The requirement consists of two product CLINs: two lathes for Cannon AFB, NM, and one lathe for Travis AFB, CA. All unit prices must be quoted as FOB Destination, including all shipping, freight, and handling costs, as no separate shipping CLIN is provided. The deadline for quotation submission is September 4, 2026, at 2:00 PM Eastern Time. The engine lathes must meet specific technical requirements, including a spindle speed of 125 to 3000 RPM, an 11-inch swing over bed, and an 18-inch center to center distance. Each machine must include a minimum of two removable toolholders conforming to ISO 13399, a removable steady rest, a quick-change tool kit, and a minimum one-year warranty. Safety features such as an emergency stop switch, gearbox overload protection, and an interlocked chuck guard are mandatory. Delivery must be completed within 365 days after receipt of order, with inspection and acceptance occurring at the destination. Award will be based on the Lowest Price Technically Acceptable (LPTA) method. The government will rank quotes by aggregate price and evaluate the lowest bidder on a pass/fail basis regarding technical compliance. To be considered, offerors must submit a completed technical matrix, the revised pricing spreadsheet from Amendment 0001, and supporting literature via email to the contracting officer. Packaging must comply with ASTM-D-3951 and MIL-STD-129 standards, and all shipments must be documented through the ASSIST collaboration tool.

Office Of Centralized Acquisition Services

POSTED

about 14 hours ago

DEADLINE

Carbide Grinding Machine SupplierThis subcontract opportunity with the Defense Logistics Agency involves the manufacture or procurement of one carbide-capable grinding machine designed for prime contractors delivering DLA supply contracts. The selected supplier must ensure the equipment meets all technical specifications and is delivered as a fully functional unit. The contract requires strict adherence to regulatory standards, specifically DFARS 252.223-7008 concerning Hexavalent Chromium and DFARS 252.225-7048 regarding export-controlled items. This requirement falls under NAICS code 333517, with a response deadline of September 28, 2026.

Defense Logistics Agency

POSTED

DEADLINE

Solicitation # W911S226U4259

The Department of Defense, through the W6QM Micc-Ft Drum office, is seeking a provider for various tools under solicitation number W911S226U4259. This combined contract is designated as a Total Small Business Set Aside under NAICS code 333517. The procurement is managed by Anthony Zyla, and the place of performance is located in the 22211 zip code area. The solicitation was posted on August 26, 2026, with a response deadline of September 3, 2026. Interested parties must refer to the attached solicitation documents for the full listing of required items. The contracting office is based in Fort Drum, New York.

W6QM Micc-Ft Drum

POSTED

DEADLINE

in about 3 hours

CNC Abrasive Waterjet - Amendment 0002

Solicitation # 47QACA26Q0394

The General Services Administration is conducting an unrestricted combined synopsis and solicitation under FAR Parts 12 and 13 to acquire six Computer Numerical Control CNC abrasive waterjet machining centers for the Department of the Air Force, Air Force Life Cycle Management Center. These systems must be manufactured within the United States and are capable of cutting various materials, including mild steel at least 4 inches thick. The machines will be deployed to six distinct global locations across CONUS and OCONUS. The procurement includes the delivery of hardware, 2-D and 3-D functional software with additional licenses, and specific accessories such as replacement nozzle bodies. The award will be based on the Lowest Price Technically Acceptable LPTA process, where quotations are ranked by total aggregate evaluated price and then assessed on a pass/fail basis for technical acceptability. Key requirements for technical acceptance include a delivery schedule not exceeding 365 days after receipt of order and the submission of a completed technical matrix with supporting product literature. All equipment must comply with US Department of Labor 29 CFR 1910 safety standards and UL certification for distribution panels. Packaging must adhere to ASTM-D-3951 and ISPM-15 heat-treatment standards for wood materials. Amendment 0002 clarified that referenced part numbers in the technical documents are for reference only and are not mandatory brand-name requirements.

Office Of Centralized Acquisition Services

POSTED

DEADLINE

in about 16 hours

More opportunities from Department Of Defense → SAN DIEGO

Same awarding agency

Military-Grade Packaging and PalletizationThis subcontract for the Department of Defense in San Diego focuses on providing specialized packaging, marking, and palletization services for prime contractors fulfilling DLA supply contracts. The service provider is responsible for ensuring all equipment is packaged according to ASTM D3951, palletized per RP001, and labeled in strict accordance with MIL-STD-129. By utilizing industrial crating materials and compliant labeling systems, the provider must deliver shipment-ready, palletized machinery that successfully passes DLA destination inspections. The opportunity is categorized under NAICS code 561910 and is associated with the San Diego office. Interested parties must respond by September 28, 2026, for performance located in San Diego, California.

Packaging and Labeling Services

POSTED

about 9 hours ago

DEADLINE

Garbage Disposal Machine SupplyThis subcontract involves the supply of one Garbage Disposal Machine, identified by NSN 4540-01-564-2340, for prime contractors supporting Department of Defense supply contracts in San Diego. The provider is responsible for manufacturing or sourcing the equipment in strict accordance with the DLA Master List of Technical and Quality Requirements. The contract mandates full compliance with RP001 packaging, ASTM D3951, and MIL-STD-129 marking standards. Additionally, the supplier must provide Material Safety Data Sheets per 29 CFR 1910.1200 if hazardous materials are present. Delivery of the packaged and labeled machine is required on a FOB Origin basis.

Heating Equipment (except Warm Air Furnaces) Manufacturing

POSTED

about 9 hours ago

DEADLINE

Industrial Packaging and Marking ServicesThis subcontract for Industrial Packaging and Marking Services is a Women-Owned Small Business Set-Aside issued by the Department of Defense in San Diego. The contractor is responsible for the professional crating, marking, and labeling of a heavy industrial lathe to ensure it is ready for First Destination Transportation. All work must adhere to ASTM-D-3951-98 standards for crate construction and MIL-STD-129 for labeling requirements. The project requires the use of heavy-duty crating materials and industrial marking equipment to support prime contractors delivering DLA supply contracts. Performance will take place in San Diego, California, under NAICS code 488490. The solicitation was posted on September 16, 2026, with a response deadline of September 28, 2026.

Other Support Activities for Road Transportation

POSTED

about 9 hours ago

DEADLINE

Supply of Titanium Alloy UNS R56400 Metal BarsThis subcontract involves the supply of 21 units of high grade Titanium Alloy UNS R56400 metal bars to support prime contractors delivering DLA Troop Support contracts. The material must be solution treated and age hardened, drawn or rolled, round, and descaled. Each bar is required to have a diameter of 1.375 inches and a length between 10 and 12 feet, adhering to the specifications of NSN 9530006106911. The procurement is managed by the Department of Defense in San Diego, with the place of performance located in San Diego, California. Falling under NAICS code 332410, the opportunity was posted on September 16, 2026, with a response deadline of September 28, 2026.

Power Boiler and Heat Exchanger Manufacturing

POSTED

about 9 hours ago

DEADLINE

CONTRACTOR FIRST ARTIC

Solicitation # SPE8E8-26-T-5601

The Department of Defense, through DLA Troop Support, is seeking quotes for the procurement of continuous cooling coils under solicitation SPE8E826T5601. The requirement consists of two line items: 16 units for line 0001 with a delivery window of 404 days after order, and one unit for line 0002 with a delivery window of 90 days after order. All items are to be delivered to DLA Distribution San Diego. This combined solicitation is open to all responsible sources and requires electronic submission of quotes by the deadline of September 28, 2026. The procurement falls under NAICS code 333415 and is managed by the office located in Philadelphia, Pennsylvania. Interested parties should direct inquiries to the primary point of contact via the DIBBS portal.

Air-Conditioning and Warm Air Heating Equipment and Commercial and Industrial Refrigeration Equipment Manufacturing

POSTED

about 9 hours ago

DEADLINE

Solicitation # SPE8E8-26-T-5599

Plumbing Fixture Fitting and Trim Manufacturing

POSTED

about 9 hours ago

DEADLINE

Solicitation # SPE8E4-26-T-2288

This fixed-price solicitation, issued by DLA Troop Support Construction and Equipment (Metals), seeks the procurement of 21 feet of Titanium Alloy UNS R56400 metal bar. The material must be solution treated and age hardening, drawn or rolled, round, and descaled, with a diameter of 1.375 inches and lengths between 10 and 12 feet. The procurement adheres to SAE AMS6930G and SAE AMS2809B standards. A Certificate of Quality Compliance is required for every shipment, and the government will perform inspection and acceptance at the destination. Eligibility for award is strictly limited to suppliers listed on the Qualified Suppliers List for Distributors (QSDL). The contract requires strict adherence to MIL-STD-129 for marking and MIL-STD-2073-1E for packaging, including specific continuous identification markings and palletization per RP001. Delivery is required within 153 days, with a need ship date of March 1, 2027, and shipment is FOB Origin to DLA Distribution San Diego. The solicitation includes a price evaluation preference for certified HUBZone Small Business Concerns and prohibits the use of additive manufacturing processes unless specifically authorized.

Iron and Steel Mills and Ferroalloy Manufacturing

POSTED

about 9 hours ago

DEADLINE

COMPRESSOR, REFRIGERATI

Solicitation # SPE8E8-26-T-5617

Air-Conditioning and Warm Air Heating Equipment and Commercial and Industrial Refrigeration Equipment Manufacturing

POSTED

about 9 hours ago

DEADLINE

FILTER ELEMENT, AIR CON

Solicitation # SPE8E8-26-T-5644

Air-Conditioning and Warm Air Heating Equipment and Commercial and Industrial Refrigeration Equipment Manufacturing

POSTED

about 9 hours ago

DEADLINE

COOLER UNIT, AIR

Solicitation # SPE8E8-26-T-5623

The Department of Defense, through DLA Troop Support, is soliciting quotes for the procurement of five air cooler units under solicitation number SPE8E826T5623. The required item is NSN 4130012251085, with the approved source specified as 38450 FCU-H3-1.75KW-LVP. Delivery is to be made to DLA Distribution San Diego within 167 days after the order is placed. This is a combined solicitation under NAICS code 333415, and all responsible sources are invited to submit electronic quotes. The deadline for responses is September 28, 2026. No hard copies of the solicitation or additional technical drawings are available, and all submissions must be handled electronically via the provided procurement channels.

Air-Conditioning and Warm Air Heating Equipment and Commercial and Industrial Refrigeration Equipment Manufacturing

POSTED

about 9 hours ago

DEADLINE

COOLER, FLUID, INDUSTRIA

Solicitation # SPE8E8-26-T-5631

The Department of Defense, through DLA Troop Support, is soliciting quotes for the procurement of one industrial fluid cooler, identified by NSN 4420013747944. This requirement is listed under solicitation number SPE8E826T5631 and is designated as a total small business set-aside under NAICS code 332410. The approved source for this item is 28953 A71-D2379. The item must be delivered to DLA Distribution San Diego within 167 days after the order is received. All quotes must be submitted electronically by the deadline of September 28, 2026. Because specifications, plans, and drawings are not available, interested parties should refer to the electronic RFQ provided via the official solicitation link for full details.

Power Boiler and Heat Exchanger Manufacturing

POSTED

about 9 hours ago

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS