Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

Engine Transport Stands and ISO Container Supply

Open

Federal

Response Deadline11/20/2026, 06:00:00 PM EST

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract involves the supply of specialized shipping containers and transport stands for prime contractors supporting marine gas turbine projects at the Naval Surface Warfare Center, Philadelphia Division. The scope of work includes the fabrication of heavy-duty transport stands and the modification of ISO shipping containers utilizing industrial welding and heavy-gauge steel. All deliverables must strictly adhere to ISO Shipping Container Standards to ensure safety and compatibility during transport. The project is managed under the Department of Defense and will be performed in Philadelphia, Pennsylvania. Interested parties should note that the response deadline is November 20, 2026, with the work falling under NAICS code 332312. The primary objective is the successful delivery of completed ISO containers and transport stands to support critical naval infrastructure.

General Info

Subcontract for fabricating ISO containers and transport stands for naval projects in Philadelphia.

Agency

Department Of Defense → Nswc Philadelphia Division

NAICS

332312 - Fabricated Structural Metal Manufacturing

Place of Performance

Philadelphia, PA, 19112, USA

Set-Aside

NONE

Documents

This scope was carved out of N64498-26-RFPREQ-PD-42-0213.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

42-0213, Rolls Royce BOA Follow-On

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedNov 6

subcontract

Response DeadlineNov 20

Submission deadline

Response Deadline

11/20/2026, 06:00:00 PM ESTin 14 days

Ready to pursue this opportunity?

Get full access to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → Nswc Philadelphia Division

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → Nswc Philadelphia Division

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Supplies specialized shipping containers and transport stands for prime contractors on Naval Surface Warfare Center, Philadelphia Division (NSWCPD) marine gas turbine projects. Fabricates heavy-duty transport stands and modifies ISO shipping containers using heavy-gauge steel and industrial welding. Requires adherence to ISO Shipping Container Standards. Delivers completed ISO containers and transport stands.

Similar Contracts

Same NAICS industry code

MOUNT, RESILIENT, WEAPON

Solicitation # SPE4A7-27-T-3363

Solicitation SPE4A7-27-T-3363, issued by the DLA Weapons Support agency, is for the procurement of 34 resilient weapon system mounts (NSN 5342-00-473-3402). This critical application item must be sourced from approved providers, such as Oil States Industries Inc. or Barry Wright Corporation, and must adhere to Qualified Products List (QPL) or Qualified Manufacturers List (QML) requirements. The contract specifies a non-extendable shelf life of 84 months (Type I) and mandates strict adherence to MIL-STD-129 for marking and MIL-STD-2073-1E for packaging. Notably, the use of mercury or mercury-containing compounds is prohibited in preservation and packaging. The delivery is set for FOB Origin with a required delivery date of October 6, 2027, and a need ship date of May 4, 2027. Inspection and acceptance will occur at the destination. Technical compliance requires a CMMC Level 2 Self-Assessment and adherence to NIST SP 800-171 standards. Quality assurance will be managed via zero-based sampling plans per MIL-STD-1916 or ASQ H1331. All quotes must be submitted via the DIBBS portal by November 13, 2026, and must comply with the Buy American Act and other domestic material restrictions.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 1 hour ago

DEADLINE

CAP, UMBILICAL GAS

Solicitation # SPE8E6-26-T-3896

Solicitation SPE8E6-26-T-3896, issued by the Defense Logistics Agency Troop Support Construction and Equipment office, is for the procurement of two units of Cap, Umbilical Gas, identified by NSN 6920-01-248-9245. The contract requires delivery within 20 days after order to the SC ARNG FMS 1 facility in Greenville, South Carolina, with the original required delivery date set for December 9, 2025. The procurement is governed by FOB Destination terms, and inspection and acceptance will occur at the destination. Technical compliance is mandated through the DLA Master List of Technical and Quality Requirements, with specific packaging requirements following ASTM D3951 and MIL-STD-129 for marking and labeling. Palletization must adhere to RP001 standards. The contract incorporates several FAR and DFARS clauses, including requirements for the Buy American and Balance of Payments Program and safeguarding covered defense information. Payment and invoicing must be processed electronically via the Wide Area WorkFlow system. This is not a small business set-aside, and all quotes must be submitted through the DIBBS portal.

Defense Logistics Agency

POSTED

about 1 hour ago

DEADLINE

SCREW, CLOSE TOLERANCE

Solicitation # SPE4A6-27-T-9966

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 1 hour ago

DEADLINE

Galvanized W-Beam and Splice Panel SupplyThis subcontract agreement involves the supply of 12Ga galvanized steel W-Beam guardrail sections and mid-span splice panels for prime contractors working on New Hampshire Department of Transportation road safety projects. The selected provider is responsible for manufacturing these components in strict accordance with NHDOT General Specifications and managing the delivery of all completed materials. To ensure quality and regulatory compliance, the contractor must provide certified test results, certificates of compliance, and Material Safety Data Sheets as required by the Worker's Right to Know Act. This procurement is managed by Das Purchasing for the state of New Hampshire, with a response deadline set for December 2, 2026.

Das Purchasing (statewide Bids & Contracts)

POSTED

about 4 hours ago

DEADLINE

Supply of Electric Brakes (NSN 6110-01-182-0526)This subcontract involves the supply of 13 specialized electric brakes, identified by NSN 6110-01-182-0526, for prime contractors working on Department of Defense Foreign Military Sales projects. Managed by the Pa DLA Aviation At Philadelphia, the contract requires the manufacturer or source to ensure strict compliance with the Buy American Balance of Payments Program and FASCSA reporting requirements. The scope of work includes the provision of Material Safety Data Sheets for any hazardous materials involved in the production or delivery of the units. The procurement falls under NAICS code 332312, with a response deadline set for November 17, 2026.

Pa DLA Aviation At Philadelphia

POSTED

about 6 hours ago

DEADLINE

52000QR270000744-CGC Frederick Hatch STBD EDG Louver

Solicitation # 52000QR270000744

The U.S. Coast Guard is soliciting quotations for the procurement of emergency diesel generator (EDG) louvers for the CGC Frederick Hatch, specifically part kit 801-MRC-K113EDG-04. This requirement is a total small business set-aside under NAICS 332312 and will be awarded as a firm-fixed-price contract using simplified acquisition procedures. The procurement is restricted to a brand-name-only basis for Centek Marine, as they are the sole Original Equipment Manufacturer capable of meeting the exact technical specifications required to prevent the EDG from overheating and ensure the cutter meets safe-to-sail standards. To be considered responsible, offerors must be authorized vendors of Centek Marine and are highly encouraged to provide a valid Letter of Authorization (LOA) with their initial quotation. Proposals must be submitted by November 19, 2026, with a mandatory delivery deadline of February 8, 2027, to the USCGC Frederick Hatch in Santa Rita, Guam. Evaluation will be based on price, technical conformance to the Statement of Work, and the ability to meet the delivery schedule, with the government reserving the right to award on an all-or-none basis.

POSTED

about 6 hours ago

DEADLINE

Carbon Fiber SCBA Cylinder SupplierThis subcontract agreement establishes a partnership to supply high-pressure carbon fiber cylinders for prime contractors working on City of Fort Valley Fire Department projects. The scope of work involves providing between 11 and 22 fully wrapped carbon fiber cylinders equipped with valves, each rated at 4,500 psig with a nominal duration of 45 minutes. To ensure safety and quality, all cylinders must be DOT/TC certified with a 15-year service life and must have been manufactured within 12 months prior to the date of delivery. The solicitation was posted on November 5, 2026, with a response deadline of November 24, 2026.

City of Fort Valley

POSTED

about 19 hours ago

DEADLINE

Heavy-Gauge Carbon Steel Roll-Off Dumpster SupplyThis subcontract agreement involves the supply of heavy-duty carbon steel roll-off containers for prime contractors working on Hampton City Schools projects across the district. The scope of work requires the fabrication of dumpsters in 10, 20, 30, and 40-yard capacities, utilizing minimum 10-gauge walls and 7-gauge doors. Construction must feature continuous welding of structural steel tubing and a finish consisting of an industrial prime coat and an acrylic direct-to-metal topcoat. The containers must be designed with a 36-inch outside rail configuration to ensure compatibility with both cable and hook-lift systems. Interested parties should note that the response deadline for this opportunity is December 10, 2026.

Hampton City Schools

POSTED

about 20 hours ago

DEADLINE

in about 1 month

Heavy-Duty Refuse Container ProvisionThis subcontract for the Virginia State Police involves the provision and maintenance of heavy-duty refuse containers for prime contractors across various facility projects. The scope of work requires the delivery and placement of clean, functional, and secure 2 cubic yard and 8 cubic yard containers. To ensure site integrity, all supplied units must be equipped with plastic lids and be specifically designed to be rodent-proof, animal-proof, and wind-proof. The contractor is responsible for ongoing maintenance and repairs to keep the containers in working order, which includes replacing necessary components. A critical performance requirement is the adherence to an 8-hour response window for all maintenance requests. This opportunity was posted on November 5, 2026, with a response deadline of November 17, 2026.

Virginia State Police

POSTED

about 22 hours ago

DEADLINE

Mounting Bracket Supply (NSN 5340-01-536-0027)This subcontract involves the manufacture or procurement of 45 mounting brackets under NSN 5340-01-536-0027 to support prime contractors for the DLA Weapons Support Land Supply Chain. The contractor is responsible for ensuring all units meet specific technical specifications, including commercial packaging standards per ASTM D3951 and marking and labeling requirements according to MIL-STD-129. The agreement requires strict compliance with the Buy American Act DFARS 252.225-7001. All completed units are to be delivered to DLA Distribution Barstow in California. The project falls under NAICS code 332312 and is managed through the Department of Defense.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

DEADLINE

Manufacturing of Electrical Equipment Mounting BasesThis subcontract involves the manufacturing of two electrical equipment mounting bases for the Department of Defense, specifically supporting the DLA Weapons Support ASC Supplier Oper OEM Division. The contractor is responsible for fabricating components according to NSN 5975014546978 specifications, while ensuring strict adherence to RA001 technical requirements and RQ017 marking standards. Quality assurance must be conducted through sampling in accordance with MIL-STD-1916 or ASQ H1331. The project requires the contractor to maintain high security and regulatory standards, including a CMMC Level 2 self-assessment and full compliance with DFARS 252.204-7012. Performance of the contract will take place in Tracy, California, under NAICS code 332312. The solicitation was posted on November 5, 2026, with a response deadline of November 13, 2026.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

DEADLINE

Fabrication of Vehicular Brush Guards / Solenoid Heat ShieldsThis subcontract involves the precision fabrication and assembly of 123 Vehicular Brush Guards and solenoid heat shields for prime contractors supporting DLA Weapons Support projects. The work requires manufacturing components to strict technical specifications using metal fabrication equipment, with a focus on quality control through inspection systems compliant with SAE AS9003 or ISO 9001. All parts must be marked according to MIL-STD-129 and delivered fully packaged. The project is managed under the Department of Defense for the DLA Weapons Support LSO Combat Vehicles and Armament, with performance located in New Cumberland. Eligible contractors must hold US/Canada Joint Certification Program approval. The solicitation was posted on November 5, 2026, with a response deadline of November 16, 2026, falling under NAICS code 332312.

DLA WEAPONS SUPPORT LSO COMBAT VEHICLES AND ARMAMENT

POSTED

DEADLINE

More opportunities from Department Of Defense → Nswc Philadelphia Division

Same awarding agency

Turbine Electrical Interface and Regulation SystemsThis subcontract for Turbine Electrical Interface and Regulation Systems supports the Naval Surface Warfare Center, Philadelphia Division within the Department of Defense. The scope of work involves the manufacture and testing of Digital Voltage Regulators and Electric Start Interface Kits for marine gas turbine projects. These components are produced using PCB assembly and industrial electronics testing to ensure high-performance delivery to prime contractors. All deliverables must strictly adhere to MIL-STD-461 and MIL-STD-810 compliance standards. The performance of the contract is centered in Philadelphia, Pennsylvania, under NAICS code 334511. Interested parties must respond by November 20, 2026.

Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument Manufacturing

POSTED

about 6 hours ago

DEADLINE

Turbine Module Gearbox and Housing SupplyThis subcontract involves the supply of complex internal and external gearbox modules and tail bearing housings for marine gas turbine projects supporting the Naval Surface Warfare Center, Philadelphia Division. The scope of work includes the fabrication and assembly of intercase, internal gearbox, external gearbox, and tail bearing housing components utilizing precision boring, milling, and gear grinding. The final deliverables consist of completed gearbox modules and gear kits. To qualify for this effort, contractors must maintain ISO 9001 and AS9100 certifications. The project is managed under the Department of Defense with performance taking place in Philadelphia. Interested parties must submit their responses by November 20, 2026.

Speed Changer, Industrial High-Speed Drive, and Gear Manufacturing

POSTED

about 6 hours ago

DEADLINE

Marine Gas Turbine Blade and Vane Kit SupplyThis subcontract involves the supply of precision-engineered turbine blade and vane kits for prime contractors supporting the Naval Surface Warfare Center, Philadelphia Division. The scope of work focuses on the manufacture of high-temperature alloy components for first through fourth stage kits, utilizing advanced processes such as precision casting, 5-axis CNC machining, and the application of thermal coatings with superalloys. To ensure the highest quality and safety standards for these Department of Defense components, the contractor must maintain AS9100 and NADCAP accreditations. Performance will take place in Philadelphia, with the final deliverables consisting of completed Blade Kits and Vane Kits under NAICS code 336411.

Aircraft Manufacturing

POSTED

about 6 hours ago

DEADLINE

LM2500 Gas Turbine Assembly Repairs

Solicitation # N6449822D4001-P00004

Other Engine Equipment Manufacturing

POSTED

about 6 hours ago

DEADLINE

42-0213, Rolls Royce BOA Follow-On

Solicitation # N64498-26-RFPREQ-PD-42-0213

The Naval Surface Warfare Center, Philadelphia Division (NSWCPD) is conducting market research to establish a Firm Fixed Price Basic Ordering Agreement (BOA) for the procurement of spare marine gas turbines, subassemblies, and parts. This effort aims to create a rotable pool of spares to support the Ship to Shore Connector, LCS 1 Freedom variant, DDG 1000 class, and DDG-51 class, ensuring that replacement engines are immediately available during engine casualties. The government intends to utilize other than full and open competition, specifically sourcing from Rolls-Royce Solutions America, Inc. as the sole producer of the required engines, including the MT30, MT5S, MT5S-HE+, 501-K34, MT7, and 250-KS4 models. Under this proposed BOA, the government will maintain the flexibility to procure specific part numbers and subordinate components via individual delivery orders on an as-needed basis. Interested respondents must submit a capability statement of no more than five pages to [email hidden] by November 20, 2026, referencing solicitation number N64498-26-RFPREQ-PD-42-0213. This notice is issued solely for planning purposes in accordance with FAR Part 10 and does not constitute a request for proposal or a commitment to contract.

Turbine and Turbine Generator Set Units Manufacturing

POSTED

about 6 hours ago

DEADLINE

Fairbanks Morse Owners Group Membership FacilitatorThis subcontract, managed by the Naval Surface Warfare Center Philadelphia Division under the Department of Defense, focuses on the facilitation of membership for the Fairbanks Morse Owners Group. The primary objective is to ensure that prime contractors working on NSWCPD projects have the necessary access to proprietary technical data, diesel engine technology, and operational updates. This access is critical for the maintenance and operation of emergency diesel generators utilized on nuclear-powered submarines and aircraft carriers. The performance of this contract is centered in Philadelphia, Pennsylvania, under NAICS code 813910. The scope of work involves managing the enrollment process and maintaining active membership status to provide a continuous flow of essential operational data. Interested parties should note the response deadline of November 11, 2026.

Business Associations

POSTED

DEADLINE

Fairbanks Morse EDG Owners Group

Solicitation # N6449827Q

The Naval Surface Warfare Center Philadelphia Division is seeking a firm-fixed-price contract for a membership in the Fairbanks Morse EDG Owners Group, to be procured on a sole source basis from Power Equipment Associates Ltd. under FAR 13.106. This membership is critical for maintaining current technical information, operational data, and lifecycle management support for diesel engines that serve as prime movers for emergency diesel generators on US Navy nuclear-powered submarines and aircraft carriers. The period of performance is scheduled from January 1, 2027, to December 31, 2027. Under this agreement, the contractor is responsible for conducting the Winter and Summer 2027 general meetings, managing a technical information exchange system for data on engine operability and failures, and overseeing the maintenance guidelines program through specialized subcommittees. Award will be based on technical acceptability, responsibility per FAR Part 9, and a determination that the price is fair and reasonable. Administrative requirements include the use of Wide Area Workflow for invoicing and strict adherence to NIST SP-800-171 and DoDI 5200.48 for the protection and marking of Controlled Unclassified Information.

Professional Organizations

POSTED

DEADLINE

SUBSAFE MAC IDIQ

Solicitation # N6449827R0010

The SUBSAFE MAC IDIQ is a Multiple Award Contract solicitation issued by the Naval Surface Warfare Center Philadelphia Division for engineering and technical services supporting U.S. Naval Submarine classes, including Seawolf, Los Angeles, Ohio, and Virginia. The contract has a total government maximum order value of 239 million dollars, with an ordering period from May 21, 2027, to May 20, 2032. The scope of work involves providing technical services, management, materials, and facilities for the repair, maintenance, modernization, and troubleshooting of main and auxiliary, weapons, hull, mechanical, and electrical equipment. This work covers Submarine Safety (SUBSAFE), Level I Material, and Non-SUBSAFE requirements globally at various shipyards and ports, though nuclear or nuclear interface work is explicitly prohibited. Awards will be made to all qualifying offerors who are determined to be responsible, submit technically acceptable proposals, and provide fair and reasonable pricing. Evaluation is conducted on an acceptable or unacceptable basis across factors including SUBSAFE certification per NAVSEANOTE 5000, personnel qualifications for key roles, and small business participation, which carries a minimum quantitative requirement of 20 percent of the total proposed contract value. Contractors must maintain a formal Quality Assurance training program and comply with rigorous standards such as MIL-STD-2035 for nondestructive testing and MIL-STD-792 for identification marking. Administrative requirements include the use of the Wide Area Workflow system for invoicing and strict adherence to security vetting, including Tier 3 investigations for personnel requiring access to Navy information systems.

Ship Building and Repairing

POSTED

DEADLINE

C45 NDI Follow-on

Solicitation # N6449827R0002

Solicitation N6449827R0002 is a competitive request for proposals for the C45 NDI Follow-on requirement, issued to SeaPort-NxG Multiple Award Contract holders. The contract provides engineering, technical, programmatic, and software development support for the Naval Surface Warfare Center, Philadelphia Division (NSWCPD), specifically focusing on Hull, Mechanical, and Electrical (HM&E) Submarine Communication, Seabed, Undersea Vehicle non-munition payload handling, and Electromagnetic Systems. The scope of work encompasses engineering design, hardware prototype fabrication, life-cycle software development equivalent to CMMI Level 3, SUBSAFE/Level I quality assurance compliance, and direct OCONUS fleet support in Japan, Guam, and Diego Garcia. The contract is structured as a Cost-Plus-Fixed-Fee (CPFF) Level of Effort task order with a total estimated effort of 425,150 hours over a five-year period, consisting of one base year and four one-year options. Each year is allocated 85,030 labor hours, with additional Not-to-Exceed (NTE) amounts for Other Direct Costs ranging from approximately 2.81 million to 2.93 million dollars per option year. Award will be based on best value, with technical factors weighted more heavily than cost. Key requirements include a Secret security clearance, adherence to MIL-STD-130 and MIL-STD-129 for item marking and packaging, and the submission of numerous Contract Data Requirements List deliverables, including software development plans, test procedures, and monthly status reports.

Engineering Services

POSTED

DEADLINE

RSMeans Online (RSMO)

Solicitation # 102-0092

Software Publishers

POSTED

DEADLINE

M250-KS4 SSE tooling

Solicitation # SIMACQ-PD-42-0026

The Naval Surface Warfare Center Philadelphia Division is seeking the procurement of specialized support equipment tooling for the M250-KS4 gas turbine engine. This engine serves as a critical component of the Redundant Independent Mechanical Start System, providing the only means to start a Ship Service Gas Turbine Generator during dark ship scenarios. The acquisition of this tooling is a prerequisite for establishing intermediate-level procedures at Regional Maintenance Center turbine shops, which will allow the Navy to replace turbine assemblies, reduce repair turnaround times, and refurbish previously unusable carcasses. This presolicitation, identified by solicitation number SIMACQ-PD-42-0026, is set aside as an 8(a) Sole Source procurement under NAICS code 332216. The project will be managed by the Department of Defense with performance taking place in Philadelphia, Pennsylvania. Interested parties should note the response deadline of November 19, 2026.

Saw Blade and Handtool Manufacturing

POSTED

DEADLINE

BIG BLUE MACHALTS

Solicitation # N6449827Q5002

The Department of Defense, specifically the NSWC Philadelphia Division, has issued solicitation N6449827Q5002 for a project titled Big Blue Machalts. This procurement falls under NAICS code 336611 and is being managed out of the agency's office located in Philadelphia, Pennsylvania. Interested parties must submit their responses by the deadline of November 19, 2026. For further inquiries or detailed information regarding the requirements, the primary point of contact is Anthony Ricciardi.

Ship Building and Repairing

POSTED

DEADLINE

Earlier notices in this NAICS code

Posted before this notice, open and closed

Close Tolerance Screw Manufacturing and Supply

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

Precision Fabrication of Angle Brackets (RTX PN 407213)

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

DEADLINE

Manufacturing of Collapsible JMIC 3.0K Units

CONSTRUCTION & EQUIPMENT CONTAINERS

POSTED

DEADLINE

Manufacturing of Flat Brackets (NSN 5342-01-029-5268)

DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

DEADLINE

Fabrication of Aluminum Vehicle Body Stakes

DLA WEAPONS SUPPORT LAND SUPPLIER OPNS VEHICLE SPT

POSTED

DEADLINE

Mounting Bracket Supply

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

DEADLINE

Fabrication of Metallic Air Cleaner Pipe Assemblies (NSN 4710-01-154-1279)

DLA WEAPONS SUPPORT LAND SUPPLIER OPNS ENGINES

POSTED

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS