Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

Environmental Compliance and Permitting Services

Active

Federal

Response Deadline08/13/2026, 09:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract seeks specialized services to secure state and local permits for drilling and water use, ensuring full adherence to federal, state, and local environmental regulations throughout project operations. The work is focused on compliance activities tied to environmental protection standards, requiring expertise in navigating regulatory frameworks and maintaining operational alignment with all applicable environmental laws. Performance is expected to occur in Las Cruces, New Mexico, with the subcontract set aside exclusively for small businesses under the SBA’s Total Small Business Set-Aside program, designated by NAICS code 541620 for environmental consulting services. The opportunity was posted on July 22, 2026, and responses must be submitted by August 13, 2026. The contracting entity is the USDA Agricultural Research Service, Agricultural Field Management and Applications Program Division, though no specific point of contact or additional location details are provided beyond the primary place of performance.

General Info

Small business contract for environmental permitting compliance in Las Cruces, NM, for USDA ARS due August 13, 2026.

Agency

Department Of Agriculture → USDA Ars Afm ApdView Agency

NAICS

541620 - Environmental Consulting ServicesView NAICS

Place of Performance

Las Cruces, NM, 88012, USA

Set-Aside

SBA

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 22

subcontract

Response DeadlineAug 13

Submission deadline

Response Deadline

08/13/2026, 09:00:00 PM UTCin 20 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Agriculture → USDA Ars Afm Apd

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Agriculture → USDA Ars Afm Apd

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Obtain state and local drilling and water use permits; ensure compliance with federal, state, and local environmental regulations during operations.

Similar Contracts

Same NAICS industry code

Technical Advisory Services for the Allens Creek Reservoir ProjectThe Brazos River Authority is seeking qualified firms to provide Technical Advisor services for the Allens Creek Reservoir Project, with a focus on regulatory permitting at both federal and state levels, water resources engineering analyses, and design of project-specific components. The selected firm will work under the direction of the BRA to safeguard the authority’s and its customers’ interests across a range of critical project tasks, offering specialized expertise to complement the BRA’s internal project team. The scope of work is flexible and will be activated at the BRA’s discretion as needed throughout the project lifecycle, ensuring targeted support where technical depth is most crucial. Proposals must be submitted by August 19, 2026, at 4:00 PM CT, under solicitation number 26-1393, which was posted on July 23, 2026. Interested firms should direct inquiries to Bryan Gray or Clarissa Cabrera at the BRA’s Waco, Texas office, with additional support available from Meagan Nix. The procurement is open to all eligible entities without set-aside restrictions, and the contract will be managed under the authority’s purchasing protocols. All correspondence and submissions must adhere to the requirements outlined in the solicitation, with performance expected to align with the BRA’s objectives for the Allens Creek Reservoir Project in Texas.

BRAZOS RIVER AUTHORITY

POSTED

about 13 hours ago

DEADLINE

NPDES COMPLIANCE AND PROGRAM SERVICESThe City of Stockton is seeking a qualified professional consultant or team to provide comprehensive NPDES compliance and program assistance services for the Stockton Wastewater Recovery Center. The contractor will be responsible for delivering technical support to ensure ongoing adherence to the NPDES permit requirements, addressing regulatory obligations, and offering guidance on operational improvements and reporting responsibilities. This engagement requires deep expertise in wastewater management, environmental regulations, and permitting processes, with a focus on maintaining compliance and mitigating potential violations. Proposals must be submitted by August 20, 2026, in response to solicitation number PUR 27-001, which was posted on July 23, 2026. The work will be performed entirely within California, specifically at the City’s wastewater facility. The primary point of contact for inquiries is Rajvir Sahota, reachable via phone or email. This procurement is open to all qualified entities without specific set-aside restrictions, and the City intends to select a partner with demonstrated experience in NPDES compliance to ensure the continued safe, lawful, and efficient operation of its wastewater recovery program.

City of Stockton

POSTED

about 15 hours ago

DEADLINE

Environmental Compliance and Permitting SupportThe contract entails providing comprehensive environmental compliance and permitting support for projects under the California Department of Transportation, with primary responsibilities including conducting California Environmental Quality Act assessments, performing wetland delineations, and carrying out cultural resource surveys. These tasks are essential to ensure regulatory adherence and facilitate the approval process for transportation initiatives across the state. The scope of work requires technical expertise in environmental science and state-specific permitting frameworks to support Caltrans in meeting legal and ecological obligations during project development. This is a subcontract opportunity posted on July 23, 2026, with a response deadline of August 24, 2026, and is classified under NAICS code 541620 for environmental consulting services. The place of performance is statewide within California, indicating that work may be required across multiple locations depending on project needs. While no specific set-aside provisions are identified, interested parties must submit proposals through the CalEProcure portal before the specified deadline to be considered for award. The contract demands a thorough understanding of California’s environmental regulations and an ability to deliver precise, defensible documentation to support permitting outcomes.

California Department of Transportation

POSTED

about 16 hours ago

DEADLINE

in about 1 month

Weed and Pest Control ServicesThe contract titled Weed and Pest Control Services outlines a subcontract for the application of herbicides, insecticides, and integrated pest management practices to control invasive weeds, insects, and rodents across grounds and easements managed by the Trinity River Authority of Texas. The work falls under NAICS Code 541620, indicating it is classified as environmental consulting services, and is intended to support ecological maintenance and public safety through targeted pest and vegetation control. The solicitation was posted on July 23, 2026, with a response deadline of August 12, 2026, allowing potential vendors a limited window to submit proposals. Performance will occur across various locations within Texas under the authority’s jurisdiction, though specific cities or addresses are not listed. The contract is open to qualified subcontractors who can demonstrate expertise in environmentally responsible pest management and compliance with applicable regulations.

Trinity River Authority of Texas

POSTED

about 17 hours ago

DEADLINE

Hazardous Materials Handling and SDS ComplianceThe contract pertains to the classification, handling, and regulatory compliance of hazardous materials contained within propeller shaft components, requiring strict adherence to federal and industry safety standards. A primary responsibility includes the preparation and timely submission of accurate Safety Data Sheets that detail the chemical composition, hazards, handling procedures, emergency measures, and disposal methods for all regulated substances involved. Compliance with applicable environmental, transportation, and occupational safety regulations is mandatory throughout the lifecycle of these components, from procurement through manufacturing and delivery. Work under this subcontract must be executed in alignment with NAICS code 541620, indicating it is a scientific and technical services contract, likely supporting defense system supply chains. The solicitation is issued by the Department of Defense’s Strategic Acquisition Program Directorate, with a submission deadline of July 28, 2026, and a posting date of July 23, 2026. The place of performance and specific office details are not provided, but the nature of the work implies coordination across multiple facility locations involved in the production or integration of naval propulsion components. Full regulatory documentation and traceability of hazardous material handling are expected to ensure seamless integration within military systems and compliance with DoD supply chain security protocols.

STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

about 19 hours ago

DEADLINE

Hazardous Materials Compliance & Labeling ServicesThe contract titled Hazardous Materials Compliance & Labeling Services requires the identification, classification, and accurate labeling of hazardous materials used in manufacturing or packaging processes. It includes the preparation of Safety Data Sheets in full compliance with the Occupational Safety and Health Administration’s Hazard Communication Standard, while also addressing applicable exemptions under OSHA HCS. The work involves ensuring all hazardous substances are properly documented, marked, and communicated to personnel in alignment with federal safety regulations. This subcontract, issued under NAICS code 541620 by the Department of Defense’s Strategic Acquisition Program Directorate, is focused on supporting defense-related operations with robust hazardous materials management. The solicitation was posted on July 23, 2026, with a response deadline of July 28, 2026. The place of performance and specific location details are not specified, and no set-aside provisions or point of contact information are provided. Contractors must deliver comprehensive compliance services that uphold the integrity of hazardous material handling within defense manufacturing and packaging environments.

STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

about 19 hours ago

DEADLINE

Environmental Compliance MonitoringThe contract seeks a subcontractor to provide environmental compliance monitoring services focused on stormwater management, erosion control inspections, and associated reporting during active site work. The scope requires ongoing observation and documentation to ensure adherence to regulatory standards for water quality and soil stabilization throughout construction or development activities. All services must align with federal environmental requirements and result in timely, accurate compliance reports that demonstrate adherence to applicable rules and permits. The solicitation is issued under the NAICS code 541620 for environmental consulting services and is classified as a subcontract through the Department of Defense’s Strategic Acquisition Program Directorate. The opportunity was posted on July 23, 2026, with a firm response deadline of July 28, 2026. While specific performance locations and point of contact details are not provided, the work will occur at active DoD project sites requiring environmental oversight, and bidders must be prepared to operate in compliance with federal, state, and local environmental regulations. Participation requires proven experience in site-based environmental monitoring and reporting within government-contracted projects.

STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

about 19 hours ago

DEADLINE

Hazardous Materials Compliance & Safety Data Sheet (SDS) ManagementThe contract requires comprehensive regulatory compliance support for hazardous materials, with a primary focus on the preparation, management, and maintenance of Safety Data Sheets aligned with OSHA’s Hazard Communication Standard and DFARS requirements. This effort ensures accurate, up-to-date documentation for all hazardous substances used or handled under the program, facilitating workplace safety, regulatory adherence, and supply chain transparency. The work must be executed in strict accordance with federal standards to enable proper hazard identification, exposure control, and emergency response procedures. This subcontract, issued by the Department of Defense’s Strategic Acquisition Program Directorate, is categorized under NAICS code 541620 for environmental and other technical consulting services. It has a narrow five-day response window, with submissions due by July 28, 2026, and was posted on July 23, 2026. While specific performance location and point of contact details are not provided, the scope is centered on delivering compliance documentation and support services critical to defense operations. The contractor must demonstrate expertise in hazardous materials regulatory frameworks, particularly in interpreting and applying OSHA and DFARS mandates to ensure full compliance across all applicable contexts.

STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

about 19 hours ago

DEADLINE

Hazardous Materials Compliance and LabelingThe contract requires the identification, labeling, and proper documentation of hazardous materials associated with water heaters and their packaging, ensuring full compliance with OSHA standards and the provision of Safety Data Sheets. All materials must be accurately labeled with hazard warnings and handled in accordance with regulatory requirements to ensure safety during storage, transport, and use. The work is scoped to support the Defense Logistics Agency under the Department of Defense, with performance expected at FPO 96673. This is a subcontract under NAICS code 541620, with responses due by July 28, 2026, following a posting date of July 23, 2026. Compliance with federal hazardous materials regulations is mandatory, and failure to meet labeling or documentation standards could result in non-conformance or rejection of deliverables.

Defense Logistics Agency

POSTED

about 19 hours ago

DEADLINE

Radioactive Material Shipment LabelingThe contract pertains to the labeling and documentation of shipments containing radioactive materials exceeding 0.002 microcuries per gram, in compliance with MIL-STD-129 standards. This subcontract is issued under a Total Small Business Set-Aside classification, ensuring that only small businesses are eligible to respond, as defined by the SBA and FAR 19.5 guidelines. The solicitation falls under NAICS code 541620, which corresponds to scientific and technical consulting services, indicating that the work involves specialized expertise in regulatory compliance, hazardous materials handling, and proper documentation procedures. The response deadline is set for July 28, 2026, with the solicitation posted on July 23, 2026, providing a five-day window for submissions. The contracting activity is managed by the Strategic Acquisition Program Directorate under the Department of Defense, and the performance location is not specified beyond the agency’s jurisdiction, meaning work may occur at various authorized facilities across the United States. All vendors must ensure accurate identification, labeling, and paperwork for radioactive shipments to meet federal transportation and safety regulations.

STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

about 19 hours ago

DEADLINE

Hazardous Material Handling & Labeling ServicesThe contract titled Hazardous Material Handling & Labeling Services is a small business set-aside under the SBA Total Small Business Set-Aside provisions, solicited by the Department of Defense’s Strategic Acquisition Program Directorate. It requires specialized services for the safe handling, accurate labeling, and proper documentation of hazardous material shipments, including the pre-approval process for substances not formally listed in regulatory catalogs. The work must comply with all applicable federal and international hazardous materials regulations and is intended to support mission-critical operations requiring secure and compliant transportation of dangerous goods. This subcontract opportunity, identified by NAICS code 541620, was posted on July 23, 2026, with responses due by July 28, 2026. The place of performance and specific location details are not provided, but the work is expected to align with Department of Defense logistics and safety standards. Only small businesses eligible under the SBA set-aside criteria may submit proposals, and the contract will be managed through the DIBBS portal at the provided link. All technical, regulatory, and procedural requirements must be fully addressed in submissions to ensure compliance with defense transportation protocols.

STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

about 19 hours ago

DEADLINE

Hazardous Materials Compliance & SDS ManagementThis contract requires the identification and management of hazardous materials used in manufacturing and packaging processes, with strict adherence to OSHA and military standards for safety documentation. The contractor must prepare comprehensive Safety Data Sheets (SDS) that meet all regulatory requirements and ensure all hazardous materials are properly labeled in compliance with federal and military guidelines. The work is part of a subcontract under a Total Small Business Set-Aside, designated for businesses certified by the Small Business Administration, and is governed under NAICS code 541620 for scientific and technical consulting services. The solicitation was posted on July 23, 2026, with a response deadline of July 28, 2026, and is managed by the Strategic Acquisition Program Directorate within the Department of Defense, though specific performance location details and point of contact information are not provided.

STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

about 19 hours ago

DEADLINE

More opportunities from Department Of Agriculture → USDA Ars Afm Apd

Same awarding agency

Mapping DroneThis solicitation, numbered 1232SA26Q0626, is a combined synopsis and request for quotation for a Mapping Drone under FAR Part 12, exclusively targeting small business concerns as a total set-aside under NAICS code 336411 with a size standard of 1,500 employees. All responsible small businesses may submit quotes electronically by 4:00 p.m. Central Standard Time on Friday, July 24, 2026, to lynn.hults@usda.gov; no faxed or hard-copy submissions will be accepted. Vendors must be actively registered in SAM.gov at the time of quotation and award, and payment will be processed via the Treasury’s Invoice Processing Platform. Submissions must include a detailed description of the drone’s capabilities, relevant experience delivering similar data to government entities, and past performance history—quotes lacking this information will be deemed non-responsive and excluded from consideration. The requirement is for a Mapping Drone to meet specified technical criteria, with the place of performance located in Hilo, Hawaii, 96720, and the contracting office based in Beltsville, Maryland. Questions regarding the solicitation must be submitted by 3:00 p.m. Central Standard Time on Tuesday, July 21, 2026. The agency, USDA ARS AFM APD, is seeking qualified small businesses capable of providing the required system and supporting documentation, with the award process following the evaluation of technical capability and past performance as outlined in the solicitation. The official point of contact is Lynn Hults, reachable by email or phone as listed.

Aircraft Manufacturing

POSTED

DEADLINE

Roof Leak Repairs Bldg. 1 and Bldg. 80This solicitation, numbered 1232SA26Q0884, is a combined synopsis and request for quotation under FAR Part 12 for roof leak repairs at Building 1 and Building 80 located at the USDA Agricultural Research Service Jamie Whitten Delta States Research Center in Stoneville, Mississippi. The acquisition is structured as a total small business set-aside under NAICS code 238160 with a size standard of $19 million in average annual receipts, allowing only eligible small businesses to compete. All responsible small businesses may submit quotations, and no separate written solicitation will be issued. The contract is anticipated to be awarded on a firm-fixed-price basis, with an estimated value between $150,000 and $300,000. Performance must commence within 10 calendar days of the notice to proceed and be completed within 120 calendar days after award. The place of performance is specifically designated as ARS-124M55 at 141 Experiment Station Road, Stoneville, MS 38776. Quotations must be submitted by the deadline of July 28, 2026, at 5:00 PM local time via email to kelly.wright@usda.gov with the subject line “RFQ 1232SA26Q0884”, and must include the completed SF-1442 Offer Form, a Transmittal Summary Letter with the Unique Entity ID, a Technical Approach narrative, as-built drawings in both digital and hard copy formats, and an SF-24 Bid Bond if the offer exceeds $35,000. Proposals are evaluated using the Lowest Priced Technically Acceptable methodology, where technical acceptability is determined first based on mandatory site visit attendance, clarity of the technical approach, submission of two to three relevant recent roofing projects with full documentation, and an acceptable past performance record. Only technically acceptable offers proceed to price evaluation, and award goes to the lowest-priced compliant offer. Key contractual requirements include compliance with OSHA standards, mandatory on-site supervision by a prime contractor-employed superintendent, strict adherence to USDA security protocols including possible Linc Pass badging, advance notification for utility outages, prohibition of debris burning or unpaved storage areas, and compliance with Buy American and Service Contract Labor Standards provisions. All materials must be new, of the best quality, and approved by the Contracting Officer,

Roofing Contractors

POSTED

DEADLINE

Building 154 Cooling Tower Media ReplacementThis solicitation, numbered 1232SA26R0048, is a combined synopsis and request for proposal issued under FAR Part 12 for the replacement of cooling tower media at Building 154 in Ames, Iowa, and is exclusively set aside for small businesses as a Total Small Business Set-Aside under NAICS code 236220 with a size standard of $45.0 million. The contract requires the contractor to provide all labor, materials, equipment, and supervision necessary to demolish and replace existing fill and drift eliminators across twelve cooling tower cells, install new PVC fill material and structural components, perform FRP repairs, and complete mechanical preventive maintenance, all while complying with manufacturer performance guarantees, CTI certification, Factory Mutual approvals, and all applicable federal, state, and local building codes. The work must commence within ten days of notice to proceed and be fully completed, including site cleanup, within 180 calendar days. Submittals for safety, quality control, construction, and scheduling plans, as well as product documentation for fill, drift eliminators, nozzles, and stainless steel hardware, must be submitted electronically within ten days of award. The contract follows a Lowest Price Technically Acceptable evaluation method, where offers must first pass technical acceptability and past performance gates before the lowest-priced compliant offer is selected. The project is governed by a firm fixed price structure, and payment will be processed by the USDA ARS Acquisition and Property D office in Beltsville, Maryland, with progress payments permitted monthly or at more frequent intervals based on Contracting Officer approval and supported by detailed itemization, subcontractor payment listings, and certification of compliance. All work must adhere to stringent security protocols, including compliance with USDA, ARS, and APHIS policies, PIV requirements, and restricted site access, with violations leading to immediate removal and permanent ban. The contractor must also comply with prevailing wage rates, Buy American provisions, trafficking-in-persons requirements, whistleblower protections, and anti-discrimination certifications under AGAR 452.203-70. Proposals must be submitted via email to Erin Riffey by July 30, 2026, with the solicitation number included in the subject line, and offerors must maintain active SAM registration and hold firm pricing for 90 days after submission. Key contractual clauses include FAR 52.246-12 for inspection, FAR 52.24

Commercial and Institutional Building Construction

POSTED

DEADLINE

Floor ReplacementThis solicitation, numbered 1232SA26Q0887, is a combined synopsis and request for quotation issued under FAR Part 12 for the replacement of flooring in a BSL-2 laboratory at the USDA ARS facility in Frederick, Maryland. The acquisition is a total small business set-aside under NAICS code 238330, with a size standard of $19 million, and no non-small business offers will be considered. The work involves installing a high-performance 100% solids epoxy flooring system in an occupied laboratory during normal business hours, requiring substrate preparation to CSP 2–3, installation of a 4-inch integral cove base, crack repair, and application of a UV-resistant, low-odor topcoat with a minimum dynamic coefficient of friction of 0.42. The flooring must meet strict performance metrics including compressive strength of at least 11,000 psi, tensile strength of 2,400 psi, and flexural strength of 4,000 psi, while adhering to USDA ARS 242.1M P&P, OSHA, and other federal, state, and local codes, with the most restrictive requirement prevailing in case of conflict. The contract is anticipated to be awarded on a firm-fixed-price basis using a lowest priced technically acceptable (LPTA) evaluation method, where all offerors must meet minimum technical acceptability across three factors: technical approach, documented experience with two recent flooring projects, and past performance free of terminations for default or negative CPARS ratings. Proposals must include a transmittal letter with UEI, an executed SF 1449, a technical narrative, and project references with client contacts. Key deliverables include a work plan within seven days of award, a site safety-specific plan within fourteen days, product data, color samples, and three core samples for thickness verification prior to final seal. Performance must occur at the Frederick, Maryland location under FOB destination terms, with completion required by December 31, 2026. All contractor personnel must comply with USDA PIV access requirements, maintain workforce integrity under Clause 452.204-71, and be trained in OSHA and USDA biosecurity protocols. The contractor must also provide a one-year warranty for workmanship and a five- to ten-year warranty for materials, correct deficiencies within 24 hours of notification, and ensure daily site cleanup

Flooring Contractors

POSTED

DEADLINE

USDA-NASS Courier Services

Couriers and Express Delivery Services

POSTED

DEADLINE

Oakes Laboratory Mixer (Brand Name or Equal)

Analytical Laboratory Instrument Manufacturing

POSTED

DEADLINE

Technical Proposal and Compliance Support (Pre-Award)The contract provides technical proposal and compliance support to prime bidders preparing submissions for a USDA ARS solicitation, focusing on ensuring full adherence to requirements through detailed comparative specification analysis and comprehensive documentation. The work is structured as a subcontract under a Total Small Business Set-Aside, targeting entities certified as small businesses by the SBA, with the NAICS code 541611 indicating operations in administrative management and general management consulting services. The opportunity was posted on July 22, 2026, with a firm deadline for responses on July 31, 2026, at 9:00 PM ET, and the place of performance is designated as Fargo, North Dakota, with a zip code of 58102. All activities must align with federal acquisition regulations and deliverables are intended to enhance the technical competitiveness and compliance posture of the prime contractor’s proposal in a highly regulated federal procurement environment.

Administrative Management and General Management Consulting Services

POSTED

DEADLINE

Warranty and Repair Support ServicesThis contract provides post-installation warranty support, preventive maintenance, and rapid-response repair services for the NIRS system under a total small business set-aside, ensuring that only small business concerns are eligible to compete. The work is performance-based and requires the contractor to deliver timely and reliable technical support, with the primary place of performance located in Fargo, North Dakota, at the USDA Agricultural Research Service facility. Services must be structured to minimize system downtime and maintain operational integrity, emphasizing proactive maintenance protocols and immediate intervention for hardware or software failures. The solicitation, issued under NAICS code 811212 for industrial and commercial machinery and equipment repair and maintenance, is open for responses until July 31, 2026, with a posting date of July 22, 2026, and is structured as a subcontract under the Department of Agriculture’s oversight.

Computer and Office Machine Repair and Maintenance

POSTED

DEADLINE

Manufacturer-Provided Training ServicesThe contract is for manufacturer-provided technical training services targeted at USDA ARS staff, focusing on the operation, maintenance, data interpretation, and software utilization of NIRS systems. Training will equip personnel with the specialized skills needed to effectively manage and leverage near-infrared spectroscopy technology in their research and operational workflows. The scope emphasizes hands-on learning and practical application to ensure long-term proficiency and system reliability within the organization. The solicitation is set aside entirely for small businesses under the SBA’s Total Small Business Set-Aside provision, with a NAICS code of 611430 indicating educational support services. Performance of the work is required to occur in Fargo, North Dakota, with a submission deadline of July 31, 2026. The opportunity is not tied to a formal solicitation number and is posted under the USDA ARS AFM APD office, with all activities centered around enabling staff to maximize the utility of NIRS equipment in their day-to-day analytical functions.

Professional and Management Development Training

POSTED

DEADLINE

NIRS System Installation and CalibrationThe contract encompasses the on-site installation, integration with FOSS calibration libraries, and initial calibration validation of a near-infrared spectroscopy system designed for the analysis of protein, moisture, fat, fiber, ash, and starch in agricultural samples. The work must be performed at the designated location in Fargo, North Dakota, with all technical activities requiring precise coordination to ensure seamless compatibility between the hardware and the proprietary FOSS calibration frameworks. The contractor is responsible for delivering a fully functional system validated to meet industry standards for accuracy and repeatability across all targeted analytes. This is a total small business set-aside subcontract under NAICS code 541380, specifically reserved for small business concerns as defined by the Small Business Administration. The opportunity was posted on July 22, 2026, with a firm response deadline of July 31, 2026, at 9:00 PM Eastern Time. The contracting activity is managed by the USDA Agricultural Research Service, Agricultural Facilities and Management, with the work location firmly established in Fargo. The nature of the work demands specialized expertise in spectroscopy, calibration methodology, and agricultural analytics, and successful bidders must be capable of providing on-site technical support, documentation, and validation reports to confirm system performance against established benchmarks.

Testing Laboratories and Services

POSTED

DEADLINE

NIRS Grain Analyzer Supply and DeliveryThe USDA Agricultural Research Service in Fargo, North Dakota, is seeking a small business to supply and deliver a commercial off-the-shelf near-infrared spectroscopy grain analyzer system for use in grain quality analysis. The contract is structured as a subcontract and is set aside entirely for small businesses under the SBA Total Small Business Set-Aside program, ensuring eligibility is restricted to firms meeting SBA size standards. The North American Industry Classification System code 334516 identifies the requirement within the instrumentation manufacturing sector, emphasizing the need for a proven, industry-standard NIRS device capable of rapid, non-destructive grain quality assessment. Delivery must be completed at the specified performance location in Fargo, with a response deadline of July 31, 2026, and the solicitation was posted on July 22, 2026. The system must be ready for immediate integration into existing USDA ARS laboratory protocols without requiring extensive customization or development.

Analytical Laboratory Instrument Manufacturing

POSTED

DEADLINE

Safety Plan Development and Site Safety MonitoringThe contract titled Safety Plan Development and Site Safety Monitoring requires the development and ongoing maintenance of a comprehensive safety plan that addresses confined space entry, lockout/tagout procedures, and hazardous materials handling. The contractor is responsible for conducting daily site inspections to ensure compliance with safety protocols and for promptly reporting all findings, observations, and potential hazards to the appropriate stakeholders. This work is essential for maintaining a safe operational environment and ensuring adherence to federal safety standards in a high-risk setting. The contract is a subcontract set aside exclusively for small businesses under the SBA Total Small Business Set-Aside program, reflecting a commitment to supporting small business participation in federal contracting. It is classified under NAICS code 541690 for other scientific and technical consulting services and will be performed at a location in Las Cruces, New Mexico, with the zip code 88012. The solicitation was posted on July 22, 2026, and responses are due by August 13, 2026. The awarding agency is the U.S. Department of Agriculture, specifically the Agricultural Research Service, Agricultural Facility Management and Planning Division.

Other Scientific and Technical Consulting Services

POSTED

DEADLINE