Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, September 16 at 2:00 PM EDT

Register Free →

This Government Contract opportunity from Department Of Homeland Security was posted on May 20, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Environmental Compliance & Site Safety Management

Closed
Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 541620
New
SLED
Monroe Area Recharge Project
Solicitation # RFP-2026-0001
The Lower Loup Natural Resources District is seeking a qualified professional engineering consultant for the Monroe Area Recharge Project in southwestern Platte County, Nebraska. The project aims to design and implement a system to divert water from the Loup Power Canal into identified wetlands and drainages to facilitate groundwater recharge and baseflow retiming. The scope of work includes an existing conditions assessment, site identification and prioritization, conceptual and final design, permitting support, and the development of a final hydrologic modeling report and an operations and maintenance plan. All designs must adhere to Federal Energy Regulatory Commission requirements, including specific mandates for minimum flow in bypass reaches, run-of-canal operations, water temperature limits of 93 degrees Fahrenheit, and a maximum diversion of 2,000 cfs between March 1 and June 30. Proposals are due by 5:00 pm on October 2, 2026, and must consist of four hard copies and one digital version delivered to the district office in Ord, Nebraska. Selection will be based on technical qualifications, a proven track record with similar water retiming projects, the proposed approach, and cost effectiveness. Work is scheduled to commence by December 1, 2026, with a timeline to be mutually agreed upon following the award. The contract requires the consultant to be fully insured for general liability and workers compensation. Payment will be processed on a monthly basis, subject to a 10 percent retainage that will be released upon project completion.
Lower Loup Natural Resources District

POSTED

about 21 hours ago

DEADLINE

in 20 days

AI Contract Overview

Show more

The contract titled "Environmental Compliance & Site Safety Management" involves ensuring adherence to environmental and safety regulations during commissioning operations, with a focus on compliance with standards such as SPCC (Spill Prevention, Control, and Countermeasure), SWPPP (Stormwater Pollution Prevention Plan), Stormwater management, and OSHA requirements. This subcontract is designated as a Total Small Business Set-Aside under FAR 19.5, suggesting that only small businesses are eligible to bid, and falls under the NAICS code 541620, indicating professional and management consulting services. Issued by the Department of Homeland Security through the SFLC Procurement Branch 3, the contract work is to be performed in Curtis Bay, with the postal code 21226. The solicitation was posted on May 20, 2026, and responses are due by May 29, 2026, at 7:00 PM. The contract emphasizes regulatory compliance and safety management during critical commissioning phases, indicating a focus on protecting the environment and ensuring worker safety in accordance with federal regulations.

General Info

Environmental compliance and safety management for commissioning, small business set-aside, DHS Curtis Bay.

Agency

Department Of Homeland Security → Sflc Procurement Branch 3(00040)View Agency

NAICS

541620 - Environmental Consulting ServicesView NAICS

Place of Performance

Curtis Bay, MD, 21226, USA

Set-Aside

SBA

Documents

This scope was carved out of 70Z04026Q60751Y00.

The full solicitation package (3 documents), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

STARTUP, TESTING, COMMISSION OF 400HZ MOTOR

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PhaseClosed
Posted

subcontract

Response Deadline

Deadline has passed

Submission Closed

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

Show more
AgencyDepartment Of Homeland Security → Sflc Procurement Branch 3(00040)
ContactsNo contacts available
OfficeN/A
Organization / Agency
Department Of Homeland Security → Sflc Procurement Branch 3(00040)
View Agency Profile
Office AddressN/A
ContactsNo contact information available

Full Description

Show more
Ensure compliance with environmental and safety regulations including SPCC, SWPPP, Stormwater, and OSHA standards during commissioning operations.

More opportunities from Department Of Homeland Security → Sflc Procurement Branch 3(00040)

Same awarding agency

NAICS: 333519
New
Federal
SFLC ALD REELING MACHINE (BRAND NAME ONLY)
Solicitation # 52000QU260002937
The U.S. Coast Guard Surface Forces Logistics Center (SFLC) is seeking a Firm Fixed Price Purchase Order for one NK5-015-001 RH heavy-duty shafted take-up reeling machine. This brand-name-only procurement is restricted to Reel Power Industrial or its authorized distributors to ensure the equipment meets specific technical requirements for reeling and coiling non-lubricated cables and wire ropes. The machine must feature a 7.5 hydraulic variable speed bi-directional drive system operating on 240 VAC 1 Phase, support reels from 24 to 60 inches in diameter and 38 inches wide, and provide a 5,000 lbs lifting capacity with a maximum pulling capacity of approximately 8,000 lbs. Additional requirements include a 1704 heavy-duty measurer for material 1/8 to 4 inches O.D. and an electronic pre-determined stop-to-length counter with an LED display. This is a total small business set-aside under solicitation 52000QU260002937, with a response deadline of September 25, 2026. Award decisions will be based on best value, evaluating the ability to provide the complete requirement, adherence to the timeframe, and price. All deliveries must be completed by October 30, 2026, shipped FOB Destination to the SFLC facility in Baltimore, Maryland. Vendors must have an active SAM.gov registration and follow military packaging and marking standards per MIL-STD-2073-1E and MIL-STD-129R. Payments are NET 30 and all invoicing must be processed through the IPP portal.
Rolling Mill and Other Metalworking Machinery Manufacturing

POSTED

1 day ago

DEADLINE

in 13 days
View Details

Find Active Opportunities Like This

Get AI-powered intelligence on the opportunities still open

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 650+ contractors already using CLEATUS